From 46e07f6e5eb0e465e086b8f485f4238bd453e3e9 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Mon, 3 Apr 2006 12:01:12 +0400 Subject: [PATCH] w1: Make w1 connector notifications depend on connector. Make w1 connector notifications depend on connector. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/Kconfig | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers/w1/Kconfig') diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index 5e61ed59a41..0c6c4359bf7 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -3,7 +3,7 @@ menu "Dallas's 1-wire bus" config W1 tristate "Dallas's 1-wire support" ---help--- - Dallas's 1-wire bus is useful to connect slow 1-pin devices + Dallas' 1-wire bus is useful to connect slow 1-pin devices such as iButtons and thermal sensors. If you want W1 support, you should say Y here. @@ -11,6 +11,18 @@ config W1 This W1 support can also be built as a module. If so, the module will be called wire.ko. +config W1_CON + depends on CONNECTOR + bool "Userspace communication over connector" + default y + --- help --- + This allows to communicate with userspace using connector [Documentation/connector]. + There are three types of messages between w1 core and userspace: + 1. Events. They are generated each time new master or slave device found + either due to automatic or requested search. + 2. Userspace commands. Includes read/write and search/alarm search comamnds. + 3. Replies to userspace commands. + source drivers/w1/masters/Kconfig source drivers/w1/slaves/Kconfig -- cgit v1.2.3-18-g5258