From c1b6b4f2342d073698dfc2547240c35045a1d00e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:28 +0200 Subject: i2c: Let framebuffer drivers set their I2C bus class to DDC Let framebuffer drivers set their I2C bus class to DDC. Once this is done, we will be able to tell the eeprom driver to only probe for EDID EEPROMs on these buses. Signed-off-by: Jean Delvare --- drivers/video/intelfb/intelfb_i2c.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/video/intelfb') diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index ca95f09d8b4..fcf9fadbf57 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -100,7 +100,8 @@ static int intelfb_gpio_getsda(void *data) static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo, struct intelfb_i2c_chan *chan, - const u32 reg, const char *name) + const u32 reg, const char *name, + int class) { int rc; @@ -108,6 +109,7 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo, chan->reg = reg; snprintf(chan->adapter.name, sizeof(chan->adapter.name), "intelfb %s", name); + chan->adapter.class = class; chan->adapter.owner = THIS_MODULE; chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; @@ -145,7 +147,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) /* setup the DDC bus for analog output */ intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOA, - "CRTDDC_A"); + "CRTDDC_A", I2C_CLASS_DDC); i++; /* need to add the output busses for each device @@ -159,9 +161,9 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) case INTEL_865G: dinfo->output[i].type = INTELFB_OUTPUT_DVO; intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, - GPIOD, "DVODDC_D"); + GPIOD, "DVODDC_D", I2C_CLASS_DDC); intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus, - GPIOE, "DVOI2C_E"); + GPIOE, "DVOI2C_E", 0); i++; break; case INTEL_915G: @@ -174,7 +176,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) /* SDVO ports have a single control bus - 2 devices */ dinfo->output[i].type = INTELFB_OUTPUT_SDVO; intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus, - GPIOE, "SDVOCTRL_E"); + GPIOE, "SDVOCTRL_E", 0); /* TODO: initialize the SDVO */ /* I830SDVOInit(pScrn, i, DVOB); */ i++; -- cgit v1.2.3-18-g5258