From 03f0dbf74c7a117c270e63d62d5e4927af6f295b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 22 Jul 2008 11:16:34 +0100 Subject: tty-usb-io_edgeport: Coding style Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/io_edgeport.c | 1823 +++++++++++++++++++++----------------- 1 file changed, 1020 insertions(+), 803 deletions(-) (limited to 'drivers/usb/serial/io_edgeport.c') diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 29346d79df7..b4bd6847a96 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -44,7 +44,7 @@ #include #include #include -#include +#include #include #include #include "io_edgeport.h" @@ -66,16 +66,16 @@ /* receive port state */ enum RXSTATE { - EXPECT_HDR1 = 0, /* Expect header byte 1 */ - EXPECT_HDR2 = 1, /* Expect header byte 2 */ - EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ - EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ + EXPECT_HDR1 = 0, /* Expect header byte 1 */ + EXPECT_HDR2 = 1, /* Expect header byte 2 */ + EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ + EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ }; -/* Transmit Fifo - * This Transmit queue is an extension of the edgeport Rx buffer. - * The maximum amount of data buffered in both the edgeport +/* Transmit Fifo + * This Transmit queue is an extension of the edgeport Rx buffer. + * The maximum amount of data buffered in both the edgeport * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits. */ struct TxFifo { @@ -132,12 +132,12 @@ struct edgeport_serial { int is_epic; /* flag if EPiC device or not */ __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ - unsigned char * interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ - struct urb * interrupt_read_urb; /* our interrupt urb */ + unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ + struct urb *interrupt_read_urb; /* our interrupt urb */ __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ - unsigned char * bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ - struct urb * read_urb; /* our bulk read urb */ + unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ + struct urb *read_urb; /* our bulk read urb */ bool read_in_progress; spinlock_t es_lock; @@ -162,16 +162,17 @@ struct divisor_table_entry { __u16 Divisor; }; -// -// Define table of divisors for Rev A EdgePort/4 hardware -// These assume a 3.6864MHz crystal, the standard /16, and -// MCR.7 = 0. -// +/* + * Define table of divisors for Rev A EdgePort/4 hardware + * These assume a 3.6864MHz crystal, the standard /16, and + * MCR.7 = 0. + */ + static const struct divisor_table_entry divisor_table[] = { - { 50, 4608}, - { 75, 3072}, - { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ - { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ + { 50, 4608}, + { 75, 3072}, + { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ + { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ { 150, 1536}, { 300, 768}, { 600, 384}, @@ -194,65 +195,86 @@ static int debug; static int low_latency = 1; /* tty low latency flag, on by default */ -static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ +static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ /* local function prototypes */ /* function prototypes for all URB callbacks */ -static void edge_interrupt_callback (struct urb *urb); -static void edge_bulk_in_callback (struct urb *urb); -static void edge_bulk_out_data_callback (struct urb *urb); -static void edge_bulk_out_cmd_callback (struct urb *urb); +static void edge_interrupt_callback(struct urb *urb); +static void edge_bulk_in_callback(struct urb *urb); +static void edge_bulk_out_data_callback(struct urb *urb); +static void edge_bulk_out_cmd_callback(struct urb *urb); /* function prototypes for the usbserial callbacks */ -static int edge_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void edge_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static int edge_write (struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); -static int edge_write_room (struct tty_struct *tty); -static int edge_chars_in_buffer (struct tty_struct *tty); -static void edge_throttle (struct tty_struct *tty); -static void edge_unthrottle (struct tty_struct *tty); -static void edge_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); -static int edge_ioctl (struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -static void edge_break (struct tty_struct *tty, int break_state); -static int edge_tiocmget (struct tty_struct *tty, struct file *file); -static int edge_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static int edge_startup (struct usb_serial *serial); -static void edge_shutdown (struct usb_serial *serial); - +static int edge_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void edge_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int edge_write_room(struct tty_struct *tty); +static int edge_chars_in_buffer(struct tty_struct *tty); +static void edge_throttle(struct tty_struct *tty); +static void edge_unthrottle(struct tty_struct *tty); +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios); +static int edge_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void edge_break(struct tty_struct *tty, int break_state); +static int edge_tiocmget(struct tty_struct *tty, struct file *file); +static int edge_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static int edge_startup(struct usb_serial *serial); +static void edge_shutdown(struct usb_serial *serial); #include "io_tables.h" /* all of the devices that this driver supports */ /* function prototypes for all of our local functions */ -static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength); -static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3); -static void edge_tty_recv (struct device *dev, struct tty_struct *tty, unsigned char *data, int length); -static void handle_new_msr (struct edgeport_port *edge_port, __u8 newMsr); -static void handle_new_lsr (struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data); -static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param); -static int calc_baud_rate_divisor (int baud_rate, int *divisor); -static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate); -static void change_port_settings (struct tty_struct *tty, struct edgeport_port *edge_port, - struct ktermios *old_termios); -static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue); -static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int writeLength); -static void send_more_port_data (struct edgeport_serial *edge_serial, struct edgeport_port *edge_port); - -static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data); -static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data); -static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data); -static void get_manufacturing_desc (struct edgeport_serial *edge_serial); -static void get_boot_desc (struct edgeport_serial *edge_serial); -static void load_application_firmware (struct edgeport_serial *edge_serial); - -static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size); - - -// ************************************************************************ -// ************************************************************************ -// ************************************************************************ -// ************************************************************************ + +static void process_rcvd_data(struct edgeport_serial *edge_serial, + unsigned char *buffer, __u16 bufferLength); +static void process_rcvd_status(struct edgeport_serial *edge_serial, + __u8 byte2, __u8 byte3); +static void edge_tty_recv(struct device *dev, struct tty_struct *tty, + unsigned char *data, int length); +static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr); +static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, + __u8 lsr, __u8 data); +static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, + __u8 param); +static int calc_baud_rate_divisor(int baud_rate, int *divisor); +static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, + int baudRate); +static void change_port_settings(struct tty_struct *tty, + struct edgeport_port *edge_port, + struct ktermios *old_termios); +static int send_cmd_write_uart_register(struct edgeport_port *edge_port, + __u8 regNum, __u8 regValue); +static int write_cmd_usb(struct edgeport_port *edge_port, + unsigned char *buffer, int writeLength); +static void send_more_port_data(struct edgeport_serial *edge_serial, + struct edgeport_port *edge_port); + +static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data); +static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, __u8 *data); +static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data); +static void get_manufacturing_desc(struct edgeport_serial *edge_serial); +static void get_boot_desc(struct edgeport_serial *edge_serial); +static void load_application_firmware(struct edgeport_serial *edge_serial); + +static void unicode_to_ascii(char *string, int buflen, + __le16 *unicode, int unicode_size); + + +/* ************************************************************************ */ +/* ************************************************************************ */ +/* ************************************************************************ */ +/* ************************************************************************ */ /************************************************************************ * * @@ -262,7 +284,7 @@ static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unic * embedded in this driver * * * ************************************************************************/ -static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) +static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) { __u32 BootCurVer; __u32 BootNewVer; @@ -276,16 +298,14 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) int response; switch (edge_serial->product_info.iDownloadFile) { - case EDGE_DOWNLOAD_FILE_I930: - fw_name = "edgeport/boot.fw"; - break; - - case EDGE_DOWNLOAD_FILE_80251: - fw_name = "edgeport/boot2.fw"; - break; - - default: - return; + case EDGE_DOWNLOAD_FILE_I930: + fw_name = "edgeport/boot.fw"; + break; + case EDGE_DOWNLOAD_FILE_80251: + fw_name = "edgeport/boot2.fw"; + break; + default: + return; } response = request_ihex_firmware(&fw, fw_name, @@ -301,7 +321,7 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) BootMinorVersion = rec->data[1]; BootBuildNumber = (rec->data[2] << 8) | rec->data[3]; - // Check Boot Image Version + /* Check Boot Image Version */ BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) + (edge_serial->boot_descriptor.MinorVersion << 16) + le16_to_cpu(edge_serial->boot_descriptor.BuildNumber); @@ -353,29 +373,29 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) * Get string descriptor from device * * * ************************************************************************/ -static int get_string (struct usb_device *dev, int Id, char *string, int buflen) +static int get_string(struct usb_device *dev, int Id, char *string, int buflen) { struct usb_string_descriptor StringDesc; struct usb_string_descriptor *pStringDesc; - dbg("%s - USB String ID = %d", __func__, Id ); + dbg("%s - USB String ID = %d", __func__, Id); - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) { + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, + &StringDesc, sizeof(StringDesc))) return 0; - } - - pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL); - if (!pStringDesc) { + pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); + if (!pStringDesc) return 0; - } - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) { + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, + pStringDesc, StringDesc.bLength)) { kfree(pStringDesc); return 0; } - unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2); + unicode_to_ascii(string, buflen, + pStringDesc->wData, pStringDesc->bLength/2); kfree(pStringDesc); dbg("%s - USB String %s", __func__, string); @@ -389,24 +409,24 @@ static int get_string (struct usb_device *dev, int Id, char *string, int buflen) * Get string descriptor from device * ************************************************************************/ -static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_descriptor **pRetDesc) +static int get_string_desc(struct usb_device *dev, int Id, + struct usb_string_descriptor **pRetDesc) { struct usb_string_descriptor StringDesc; struct usb_string_descriptor *pStringDesc; - dbg("%s - USB String ID = %d", __func__, Id ); + dbg("%s - USB String ID = %d", __func__, Id); - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) { + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, + sizeof(StringDesc))) return 0; - } - - pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL); - if (!pStringDesc) { + pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); + if (!pStringDesc) return -1; - } - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) { + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, + StringDesc.bLength)) { kfree(pStringDesc); return -1; } @@ -418,25 +438,30 @@ static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_de static void dump_product_info(struct edgeport_product_info *product_info) { - // Dump Product Info structure + /* Dump Product Info structure */ dbg("**Product Information:"); - dbg(" ProductId %x", product_info->ProductId ); - dbg(" NumPorts %d", product_info->NumPorts ); - dbg(" ProdInfoVer %d", product_info->ProdInfoVer ); + dbg(" ProductId %x", product_info->ProductId); + dbg(" NumPorts %d", product_info->NumPorts); + dbg(" ProdInfoVer %d", product_info->ProdInfoVer); dbg(" IsServer %d", product_info->IsServer); - dbg(" IsRS232 %d", product_info->IsRS232 ); - dbg(" IsRS422 %d", product_info->IsRS422 ); - dbg(" IsRS485 %d", product_info->IsRS485 ); - dbg(" RomSize %d", product_info->RomSize ); - dbg(" RamSize %d", product_info->RamSize ); - dbg(" CpuRev %x", product_info->CpuRev ); + dbg(" IsRS232 %d", product_info->IsRS232); + dbg(" IsRS422 %d", product_info->IsRS422); + dbg(" IsRS485 %d", product_info->IsRS485); + dbg(" RomSize %d", product_info->RomSize); + dbg(" RamSize %d", product_info->RamSize); + dbg(" CpuRev %x", product_info->CpuRev); dbg(" BoardRev %x", product_info->BoardRev); dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion, product_info->BootMinorVersion, le16_to_cpu(product_info->BootBuildNumber)); - dbg(" ManufactureDescDate %d/%d/%d", product_info->ManufactureDescDate[0], - product_info->ManufactureDescDate[1], - product_info->ManufactureDescDate[2]+1900); + dbg(" FirmwareMajorVersion %d.%d.%d", + product_info->FirmwareMajorVersion, + product_info->FirmwareMinorVersion, + le16_to_cpu(product_info->FirmwareBuildNumber)); + dbg(" ManufactureDescDate %d/%d/%d", + product_info->ManufactureDescDate[0], + product_info->ManufactureDescDate[1], + product_info->ManufactureDescDate[2]+1900); dbg(" iDownloadFile 0x%x", product_info->iDownloadFile); dbg(" EpicVer %d", product_info->EpicVer); } @@ -445,55 +470,60 @@ static void get_product_info(struct edgeport_serial *edge_serial) { struct edgeport_product_info *product_info = &edge_serial->product_info; - memset (product_info, 0, sizeof(struct edgeport_product_info)); - - product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); - product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; - product_info->ProdInfoVer = 0; - - product_info->RomSize = edge_serial->manuf_descriptor.RomSize; - product_info->RamSize = edge_serial->manuf_descriptor.RamSize; - product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; - product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; - - product_info->BootMajorVersion = edge_serial->boot_descriptor.MajorVersion; - product_info->BootMinorVersion = edge_serial->boot_descriptor.MinorVersion; - product_info->BootBuildNumber = edge_serial->boot_descriptor.BuildNumber; - - memcpy(product_info->ManufactureDescDate, edge_serial->manuf_descriptor.DescDate, sizeof(edge_serial->manuf_descriptor.DescDate)); - - // check if this is 2nd generation hardware - if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ION_DEVICE_ID_80251_NETCHIP) { - product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; - } else { - product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; - } - - // Determine Product type and set appropriate flags + memset(product_info, 0, sizeof(struct edgeport_product_info)); + + product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); + product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; + product_info->ProdInfoVer = 0; + + product_info->RomSize = edge_serial->manuf_descriptor.RomSize; + product_info->RamSize = edge_serial->manuf_descriptor.RamSize; + product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; + product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; + + product_info->BootMajorVersion = + edge_serial->boot_descriptor.MajorVersion; + product_info->BootMinorVersion = + edge_serial->boot_descriptor.MinorVersion; + product_info->BootBuildNumber = + edge_serial->boot_descriptor.BuildNumber; + + memcpy(product_info->ManufactureDescDate, + edge_serial->manuf_descriptor.DescDate, + sizeof(edge_serial->manuf_descriptor.DescDate)); + + /* check if this is 2nd generation hardware */ + if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) + & ION_DEVICE_ID_80251_NETCHIP) + product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; + else + product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; + + /* Determine Product type and set appropriate flags */ switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { - case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: - case ION_DEVICE_ID_EDGEPORT_4T: - case ION_DEVICE_ID_EDGEPORT_4: - case ION_DEVICE_ID_EDGEPORT_2: - case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: - case ION_DEVICE_ID_EDGEPORT_8: - case ION_DEVICE_ID_EDGEPORT_421: - case ION_DEVICE_ID_EDGEPORT_21: - case ION_DEVICE_ID_EDGEPORT_2_DIN: - case ION_DEVICE_ID_EDGEPORT_4_DIN: - case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: - product_info->IsRS232 = 1; - break; + case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: + case ION_DEVICE_ID_EDGEPORT_4T: + case ION_DEVICE_ID_EDGEPORT_4: + case ION_DEVICE_ID_EDGEPORT_2: + case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: + case ION_DEVICE_ID_EDGEPORT_8: + case ION_DEVICE_ID_EDGEPORT_421: + case ION_DEVICE_ID_EDGEPORT_21: + case ION_DEVICE_ID_EDGEPORT_2_DIN: + case ION_DEVICE_ID_EDGEPORT_4_DIN: + case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: + product_info->IsRS232 = 1; + break; - case ION_DEVICE_ID_EDGEPORT_2I: // Edgeport/2 RS422/RS485 - product_info->IsRS422 = 1; - product_info->IsRS485 = 1; - break; + case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */ + product_info->IsRS422 = 1; + product_info->IsRS485 = 1; + break; - case ION_DEVICE_ID_EDGEPORT_8I: // Edgeport/4 RS422 - case ION_DEVICE_ID_EDGEPORT_4I: // Edgeport/4 RS422 - product_info->IsRS422 = 1; - break; + case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */ + case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */ + product_info->IsRS422 = 1; + break; } dump_product_info(product_info); @@ -521,32 +551,32 @@ static int get_epic_descriptor(struct edgeport_serial *ep) ep->is_epic = 1; memset(product_info, 0, sizeof(struct edgeport_product_info)); - product_info->NumPorts = epic->NumPorts; - product_info->ProdInfoVer = 0; - product_info->FirmwareMajorVersion = epic->MajorVersion; - product_info->FirmwareMinorVersion = epic->MinorVersion; - product_info->FirmwareBuildNumber = epic->BuildNumber; - product_info->iDownloadFile = epic->iDownloadFile; - product_info->EpicVer = epic->EpicVer; - product_info->Epic = epic->Supports; - product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; + product_info->NumPorts = epic->NumPorts; + product_info->ProdInfoVer = 0; + product_info->FirmwareMajorVersion = epic->MajorVersion; + product_info->FirmwareMinorVersion = epic->MinorVersion; + product_info->FirmwareBuildNumber = epic->BuildNumber; + product_info->iDownloadFile = epic->iDownloadFile; + product_info->EpicVer = epic->EpicVer; + product_info->Epic = epic->Supports; + product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; dump_product_info(product_info); bits = &ep->epic_descriptor.Supports; dbg("**EPIC descriptor:"); dbg(" VendEnableSuspend: %s", bits->VendEnableSuspend ? "TRUE": "FALSE"); - dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE" ); - dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE" ); - dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE" ); - dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE" ); - dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE" ); - dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE" ); - dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE" ); - dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE" ); - dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE" ); - dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE" ); - dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE" ); - dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE" ); + dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE"); + dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE"); + dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE"); + dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); + dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); + dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE"); + dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE"); + dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); + dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE"); + dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE"); + dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); + dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE"); } return result; @@ -562,10 +592,10 @@ static int get_epic_descriptor(struct edgeport_serial *ep) /***************************************************************************** * edge_interrupt_callback - * this is the callback function for when we have received data on the + * this is the callback function for when we have received data on the * interrupt endpoint. *****************************************************************************/ -static void edge_interrupt_callback (struct urb *urb) +static void edge_interrupt_callback(struct urb *urb) { struct edgeport_serial *edge_serial = urb->context; struct edgeport_port *edge_port; @@ -590,17 +620,17 @@ static void edge_interrupt_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __func__, status); + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } - // process this interrupt-read even if there are no ports open + /* process this interrupt-read even if there are no ports open */ if (length) { - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data); + usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, + __func__, length, data); if (length > 1) { bytes_avail = data[0] | (data[1] << 8); @@ -614,7 +644,8 @@ static void edge_interrupt_callback (struct urb *urb) dbg("%s - posting a read", __func__); edge_serial->read_in_progress = true; - /* we have pending bytes on the bulk in pipe, send a request */ + /* we have pending bytes on the + bulk in pipe, send a request */ edge_serial->read_urb->dev = edge_serial->serial->dev; result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (result) { @@ -628,7 +659,8 @@ static void edge_interrupt_callback (struct urb *urb) /* grab the txcredits for the ports if available */ position = 2; portNumber = 0; - while ((position < length) && (portNumber < edge_serial->serial->num_ports)) { + while ((position < length) && + (portNumber < edge_serial->serial->num_ports)) { txCredits = data[position] | (data[position+1] << 8); if (txCredits) { port = edge_serial->serial->port[portNumber]; @@ -637,14 +669,19 @@ static void edge_interrupt_callback (struct urb *urb) spin_lock(&edge_port->ep_lock); edge_port->txCredits += txCredits; spin_unlock(&edge_port->ep_lock); - dbg("%s - txcredits for port%d = %d", __func__, portNumber, edge_port->txCredits); + dbg("%s - txcredits for port%d = %d", + __func__, portNumber, + edge_port->txCredits); - /* tell the tty driver that something has changed */ + /* tell the tty driver that something + has changed */ if (edge_port->port->port.tty) tty_wakeup(edge_port->port->port.tty); - // Since we have more credit, check if more data can be sent - send_more_port_data(edge_serial, edge_port); + /* Since we have more credit, check + if more data can be sent */ + send_more_port_data(edge_serial, + edge_port); } } position += 2; @@ -653,19 +690,20 @@ static void edge_interrupt_callback (struct urb *urb) } exit: - result = usb_submit_urb (urb, GFP_ATOMIC); - if (result) { - dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result); - } + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting control urb\n", + __func__, result); } /***************************************************************************** * edge_bulk_in_callback - * this is the callback function for when we have received data on the + * this is the callback function for when we have received data on the * bulk in endpoint. *****************************************************************************/ -static void edge_bulk_in_callback (struct urb *urb) +static void edge_bulk_in_callback(struct urb *urb) { struct edgeport_serial *edge_serial = urb->context; unsigned char *data = urb->transfer_buffer; @@ -690,16 +728,18 @@ static void edge_bulk_in_callback (struct urb *urb) raw_data_length = urb->actual_length; - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, raw_data_length, data); + usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, + __func__, raw_data_length, data); spin_lock(&edge_serial->es_lock); /* decrement our rxBytes available by the number that we just got */ edge_serial->rxBytesAvail -= raw_data_length; - dbg("%s - Received = %d, rxBytesAvail %d", __func__, raw_data_length, edge_serial->rxBytesAvail); + dbg("%s - Received = %d, rxBytesAvail %d", __func__, + raw_data_length, edge_serial->rxBytesAvail); - process_rcvd_data (edge_serial, data, urb->actual_length); + process_rcvd_data(edge_serial, data, urb->actual_length); /* check to see if there's any more data for us to read */ if (edge_serial->rxBytesAvail > 0) { @@ -722,10 +762,10 @@ static void edge_bulk_in_callback (struct urb *urb) /***************************************************************************** * edge_bulk_out_data_callback - * this is the callback function for when we have finished sending serial data - * on the bulk out endpoint. + * this is the callback function for when we have finished sending + * serial data on the bulk out endpoint. *****************************************************************************/ -static void edge_bulk_out_data_callback (struct urb *urb) +static void edge_bulk_out_data_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; struct tty_struct *tty; @@ -741,24 +781,26 @@ static void edge_bulk_out_data_callback (struct urb *urb) tty = edge_port->port->port.tty; if (tty && edge_port->open) { - /* let the tty driver wakeup if it has a special write_wakeup function */ + /* let the tty driver wakeup if it has a special + write_wakeup function */ tty_wakeup(tty); } - // Release the Write URB + /* Release the Write URB */ edge_port->write_in_progress = false; - // Check if more data needs to be sent - send_more_port_data((struct edgeport_serial *)(usb_get_serial_data(edge_port->port->serial)), edge_port); + /* Check if more data needs to be sent */ + send_more_port_data((struct edgeport_serial *) + (usb_get_serial_data(edge_port->port->serial)), edge_port); } /***************************************************************************** * BulkOutCmdCallback - * this is the callback function for when we have finished sending a command - * on the bulk out endpoint. + * this is the callback function for when we have finished sending a + * command on the bulk out endpoint. *****************************************************************************/ -static void edge_bulk_out_cmd_callback (struct urb *urb) +static void edge_bulk_out_cmd_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; struct tty_struct *tty; @@ -767,17 +809,19 @@ static void edge_bulk_out_cmd_callback (struct urb *urb) dbg("%s", __func__); atomic_dec(&CmdUrbs); - dbg("%s - FREE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs)); + dbg("%s - FREE URB %p (outstanding %d)", __func__, + urb, atomic_read(&CmdUrbs)); /* clean up the transfer buffer */ kfree(urb->transfer_buffer); /* Free the command urb */ - usb_free_urb (urb); + usb_free_urb(urb); if (status) { - dbg("%s - nonzero write bulk status received: %d", __func__, status); + dbg("%s - nonzero write bulk status received: %d", + __func__, status); return; } @@ -805,7 +849,7 @@ static void edge_bulk_out_cmd_callback (struct urb *urb) * Otherwise we return a negative error number. *****************************************************************************/ static int edge_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file * filp) + struct usb_serial_port *port, struct file *filp) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct usb_serial *serial; @@ -820,51 +864,59 @@ static int edge_open(struct tty_struct *tty, if (tty) tty->low_latency = low_latency; - /* see if we've set up our endpoint info yet (can't set it up in edge_startup - as the structures were not set up at that time.) */ + /* see if we've set up our endpoint info yet (can't set it up + in edge_startup as the structures were not set up at that time.) */ serial = port->serial; edge_serial = usb_get_serial_data(serial); if (edge_serial == NULL) return -ENODEV; if (edge_serial->interrupt_in_buffer == NULL) { struct usb_serial_port *port0 = serial->port[0]; - + /* not set up yet, so do it now */ - edge_serial->interrupt_in_buffer = port0->interrupt_in_buffer; - edge_serial->interrupt_in_endpoint = port0->interrupt_in_endpointAddress; + edge_serial->interrupt_in_buffer = + port0->interrupt_in_buffer; + edge_serial->interrupt_in_endpoint = + port0->interrupt_in_endpointAddress; edge_serial->interrupt_read_urb = port0->interrupt_in_urb; edge_serial->bulk_in_buffer = port0->bulk_in_buffer; - edge_serial->bulk_in_endpoint = port0->bulk_in_endpointAddress; + edge_serial->bulk_in_endpoint = + port0->bulk_in_endpointAddress; edge_serial->read_urb = port0->read_urb; - edge_serial->bulk_out_endpoint = port0->bulk_out_endpointAddress; - + edge_serial->bulk_out_endpoint = + port0->bulk_out_endpointAddress; + /* set up our interrupt urb */ usb_fill_int_urb(edge_serial->interrupt_read_urb, - serial->dev, - usb_rcvintpipe(serial->dev, - port0->interrupt_in_endpointAddress), - port0->interrupt_in_buffer, - edge_serial->interrupt_read_urb->transfer_buffer_length, - edge_interrupt_callback, edge_serial, - edge_serial->interrupt_read_urb->interval); - + serial->dev, + usb_rcvintpipe(serial->dev, + port0->interrupt_in_endpointAddress), + port0->interrupt_in_buffer, + edge_serial->interrupt_read_urb->transfer_buffer_length, + edge_interrupt_callback, edge_serial, + edge_serial->interrupt_read_urb->interval); + /* set up our bulk in urb */ usb_fill_bulk_urb(edge_serial->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port0->bulk_in_endpointAddress), - port0->bulk_in_buffer, - edge_serial->read_urb->transfer_buffer_length, - edge_bulk_in_callback, edge_serial); + usb_rcvbulkpipe(serial->dev, + port0->bulk_in_endpointAddress), + port0->bulk_in_buffer, + edge_serial->read_urb->transfer_buffer_length, + edge_bulk_in_callback, edge_serial); edge_serial->read_in_progress = false; /* start interrupt read for this edgeport - * this interrupt will continue as long as the edgeport is connected */ - response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL); + * this interrupt will continue as long + * as the edgeport is connected */ + response = usb_submit_urb(edge_serial->interrupt_read_urb, + GFP_KERNEL); if (response) { - dev_err(&port->dev, "%s - Error %d submitting control urb\n", __func__, response); + dev_err(&port->dev, + "%s - Error %d submitting control urb\n", + __func__, response); } } - + /* initialize our wait queues */ init_waitqueue_head(&edge_port->wait_open); init_waitqueue_head(&edge_port->wait_chase); @@ -872,26 +924,29 @@ static int edge_open(struct tty_struct *tty, init_waitqueue_head(&edge_port->wait_command); /* initialize our icount structure */ - memset (&(edge_port->icount), 0x00, sizeof(edge_port->icount)); + memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount)); /* initialize our port settings */ - edge_port->txCredits = 0; /* Can't send any data yet */ - edge_port->shadowMCR = MCR_MASTER_IE; /* Must always set this bit to enable ints! */ + edge_port->txCredits = 0; /* Can't send any data yet */ + /* Must always set this bit to enable ints! */ + edge_port->shadowMCR = MCR_MASTER_IE; edge_port->chaseResponsePending = false; /* send a open port command */ edge_port->openPending = true; edge_port->open = false; - response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0); + response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0); if (response < 0) { - dev_err(&port->dev, "%s - error sending open port command\n", __func__); + dev_err(&port->dev, "%s - error sending open port command\n", + __func__); edge_port->openPending = false; return -ENODEV; } /* now wait for the port to be completely opened */ - wait_event_timeout(edge_port->wait_open, !edge_port->openPending, OPEN_TIMEOUT); + wait_event_timeout(edge_port->wait_open, !edge_port->openPending, + OPEN_TIMEOUT); if (!edge_port->open) { /* open timed out */ @@ -905,25 +960,26 @@ static int edge_open(struct tty_struct *tty, edge_port->txfifo.tail = 0; edge_port->txfifo.count = 0; edge_port->txfifo.size = edge_port->maxTxCredits; - edge_port->txfifo.fifo = kmalloc (edge_port->maxTxCredits, GFP_KERNEL); + edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); if (!edge_port->txfifo.fifo) { dbg("%s - no memory", __func__); - edge_close (tty, port, filp); + edge_close(tty, port, filp); return -ENOMEM; } /* Allocate a URB for the write */ - edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL); + edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL); edge_port->write_in_progress = false; if (!edge_port->write_urb) { dbg("%s - no memory", __func__); - edge_close (tty, port, filp); + edge_close(tty, port, filp); return -ENOMEM; } - dbg("%s(%d) - Initialize TX fifo to %d bytes", __func__, port->number, edge_port->maxTxCredits); + dbg("%s(%d) - Initialize TX fifo to %d bytes", + __func__, port->number, edge_port->maxTxCredits); dbg("%s exited", __func__); @@ -949,27 +1005,28 @@ static void block_until_chase_response(struct edgeport_port *edge_port) int loop = 10; while (1) { - // Save Last credits + /* Save Last credits */ lastCredits = edge_port->txCredits; - // Did we get our Chase response + /* Did we get our Chase response */ if (!edge_port->chaseResponsePending) { dbg("%s - Got Chase Response", __func__); - // did we get all of our credit back? - if (edge_port->txCredits == edge_port->maxTxCredits ) { + /* did we get all of our credit back? */ + if (edge_port->txCredits == edge_port->maxTxCredits) { dbg("%s - Got all credits", __func__); return; } } - // Block the thread for a while - prepare_to_wait(&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE); + /* Block the thread for a while */ + prepare_to_wait(&edge_port->wait_chase, &wait, + TASK_UNINTERRUPTIBLE); schedule_timeout(timeout); finish_wait(&edge_port->wait_chase, &wait); if (lastCredits == edge_port->txCredits) { - // No activity.. count down. + /* No activity.. count down. */ loop--; if (loop == 0) { edge_port->chaseResponsePending = false; @@ -977,8 +1034,9 @@ static void block_until_chase_response(struct edgeport_port *edge_port) return; } } else { - // Reset timeout value back to 10 seconds - dbg("%s - Last %d, Current %d", __func__, lastCredits, edge_port->txCredits); + /* Reset timeout value back to 10 seconds */ + dbg("%s - Last %d, Current %d", __func__, + lastCredits, edge_port->txCredits); loop = 10; } } @@ -995,7 +1053,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port) * 3. A timeout of 3 seconds without activity has expired * ************************************************************************/ -static void block_until_tx_empty (struct edgeport_port *edge_port) +static void block_until_tx_empty(struct edgeport_port *edge_port) { DEFINE_WAIT(wait); struct TxFifo *fifo = &edge_port->txfifo; @@ -1004,31 +1062,32 @@ static void block_until_tx_empty (struct edgeport_port *edge_port) int loop = 30; while (1) { - // Save Last count + /* Save Last count */ lastCount = fifo->count; - // Is the Edgeport Buffer empty? + /* Is the Edgeport Buffer empty? */ if (lastCount == 0) { dbg("%s - TX Buffer Empty", __func__); return; } - // Block the thread for a while - prepare_to_wait (&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE); + /* Block the thread for a while */ + prepare_to_wait(&edge_port->wait_chase, &wait, + TASK_UNINTERRUPTIBLE); schedule_timeout(timeout); finish_wait(&edge_port->wait_chase, &wait); dbg("%s wait", __func__); if (lastCount == fifo->count) { - // No activity.. count down. + /* No activity.. count down. */ loop--; if (loop == 0) { dbg("%s - TIMEOUT", __func__); return; } } else { - // Reset timeout value back to seconds + /* Reset timeout value back to seconds */ loop = 30; } } @@ -1040,20 +1099,20 @@ static void block_until_tx_empty (struct edgeport_port *edge_port) * this function is called by the tty driver when a port is closed *****************************************************************************/ static void edge_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file * filp) + struct usb_serial_port *port, struct file *filp) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; int status; dbg("%s - port %d", __func__, port->number); - + edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); - if ((edge_serial == NULL) || (edge_port == NULL)) + if (edge_serial == NULL || edge_port == NULL) return; - - // block until tx is empty + + /* block until tx is empty */ block_until_tx_empty(edge_port); edge_port->closePending = true; @@ -1065,13 +1124,12 @@ static void edge_close(struct tty_struct *tty, edge_port->chaseResponsePending = true; dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); - status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); - if (status == 0) { - // block until chase finished + status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); + if (status == 0) + /* block until chase finished */ block_until_chase_response(edge_port); - } else { + else edge_port->chaseResponsePending = false; - } } if ((!edge_serial->is_epic) || @@ -1079,10 +1137,10 @@ static void edge_close(struct tty_struct *tty, (edge_serial->epic_descriptor.Supports.IOSPClose))) { /* close the port */ dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__); - send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0); + send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0); } - //port->close = true; + /* port->close = true; */ edge_port->closePending = false; edge_port->open = false; edge_port->openPending = false; @@ -1090,7 +1148,8 @@ static void edge_close(struct tty_struct *tty, usb_kill_urb(edge_port->write_urb); if (edge_port->write_urb) { - /* if this urb had a transfer buffer already (old transfer) free it */ + /* if this urb had a transfer buffer already + (old transfer) free it */ kfree(edge_port->write_urb->transfer_buffer); usb_free_urb(edge_port->write_urb); edge_port->write_urb = NULL; @@ -1099,14 +1158,14 @@ static void edge_close(struct tty_struct *tty, edge_port->txfifo.fifo = NULL; dbg("%s exited", __func__); -} +} /***************************************************************************** * SerialWrite - * this function is called by the tty driver when data should be written to - * the port. - * If successful, we return the number of bytes written, otherwise we return - * a negative error number. + * this function is called by the tty driver when data should be written + * to the port. + * If successful, we return the number of bytes written, otherwise we + * return a negative error number. *****************************************************************************/ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count) @@ -1124,66 +1183,76 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, if (edge_port == NULL) return -ENODEV; - // get a pointer to the Tx fifo + /* get a pointer to the Tx fifo */ fifo = &edge_port->txfifo; spin_lock_irqsave(&edge_port->ep_lock, flags); - // calculate number of bytes to put in fifo - copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count)); + /* calculate number of bytes to put in fifo */ + copySize = min((unsigned int)count, + (edge_port->txCredits - fifo->count)); - dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __func__, - port->number, count, edge_port->txCredits - fifo->count, copySize); + dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", + __func__, port->number, count, + edge_port->txCredits - fifo->count, copySize); - /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */ + /* catch writes of 0 bytes which the tty driver likes to give us, + and when txCredits is empty */ if (copySize == 0) { dbg("%s - copySize = Zero", __func__); goto finish_write; } - // queue the data - // since we can never overflow the buffer we do not have to check for full condition - - // the copy is done is two parts -- first fill to the end of the buffer - // then copy the reset from the start of the buffer - + /* queue the data + * since we can never overflow the buffer we do not have to check for a + * full condition + * + * the copy is done is two parts -- first fill to the end of the buffer + * then copy the reset from the start of the buffer + */ bytesleft = fifo->size - fifo->head; - firsthalf = min (bytesleft, copySize); - dbg("%s - copy %d bytes of %d into fifo ", __func__, firsthalf, bytesleft); + firsthalf = min(bytesleft, copySize); + dbg("%s - copy %d bytes of %d into fifo ", __func__, + firsthalf, bytesleft); /* now copy our data */ memcpy(&fifo->fifo[fifo->head], data, firsthalf); - usb_serial_debug_data(debug, &port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); + usb_serial_debug_data(debug, &port->dev, __func__, + firsthalf, &fifo->fifo[fifo->head]); - // update the index and size + /* update the index and size */ fifo->head += firsthalf; fifo->count += firsthalf; - // wrap the index - if (fifo->head == fifo->size) { + /* wrap the index */ + if (fifo->head == fifo->size) fifo->head = 0; - } secondhalf = copySize-firsthalf; if (secondhalf) { dbg("%s - copy rest of data %d", __func__, secondhalf); memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); - usb_serial_debug_data(debug, &port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); - // update the index and size + usb_serial_debug_data(debug, &port->dev, __func__, + secondhalf, &fifo->fifo[fifo->head]); + /* update the index and size */ fifo->count += secondhalf; fifo->head += secondhalf; - // No need to check for wrap since we can not get to end of fifo in this part + /* No need to check for wrap since we can not get to end of + * the fifo in this part + */ } finish_write: spin_unlock_irqrestore(&edge_port->ep_lock, flags); - send_more_port_data((struct edgeport_serial *)usb_get_serial_data(port->serial), edge_port); + send_more_port_data((struct edgeport_serial *) + usb_get_serial_data(port->serial), edge_port); - dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, copySize, edge_port->txCredits, fifo->count); + dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, + copySize, edge_port->txCredits, fifo->count); - return copySize; + return copySize; } @@ -1200,7 +1269,8 @@ finish_write: * can transmit more. * ************************************************************************/ -static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port) +static void send_more_port_data(struct edgeport_serial *edge_serial, + struct edgeport_port *edge_port) { struct TxFifo *fifo = &edge_port->txfifo; struct urb *urb; @@ -1219,67 +1289,78 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge if (edge_port->write_in_progress || !edge_port->open || (fifo->count == 0)) { - dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __func__, edge_port->port->number, fifo->count, edge_port->write_in_progress); + dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", + __func__, edge_port->port->number, + fifo->count, edge_port->write_in_progress); goto exit_send; } - // since the amount of data in the fifo will always fit into the - // edgeport buffer we do not need to check the write length - - // Do we have enough credits for this port to make it worthwhile - // to bother queueing a write. If it's too small, say a few bytes, - // it's better to wait for more credits so we can do a larger - // write. - if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits,EDGE_FW_BULK_MAX_PACKET_SIZE)) { - dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __func__, edge_port->port->number, fifo->count, edge_port->txCredits ); + /* since the amount of data in the fifo will always fit into the + * edgeport buffer we do not need to check the write length + * + * Do we have enough credits for this port to make it worthwhile + * to bother queueing a write. If it's too small, say a few bytes, + * it's better to wait for more credits so we can do a larger write. + */ + if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { + dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", + __func__, edge_port->port->number, fifo->count, + edge_port->txCredits); goto exit_send; } - // lock this write + /* lock this write */ edge_port->write_in_progress = true; - // get a pointer to the write_urb + /* get a pointer to the write_urb */ urb = edge_port->write_urb; /* make sure transfer buffer is freed */ kfree(urb->transfer_buffer); urb->transfer_buffer = NULL; - /* build the data header for the buffer and port that we are about to send out */ + /* build the data header for the buffer and port that we are about + to send out */ count = fifo->count; - buffer = kmalloc (count+2, GFP_ATOMIC); + buffer = kmalloc(count+2, GFP_ATOMIC); if (buffer == NULL) { - dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __func__); + dev_err(&edge_port->port->dev, + "%s - no more kernel memory...\n", __func__); edge_port->write_in_progress = false; goto exit_send; } - buffer[0] = IOSP_BUILD_DATA_HDR1 (edge_port->port->number - edge_port->port->serial->minor, count); - buffer[1] = IOSP_BUILD_DATA_HDR2 (edge_port->port->number - edge_port->port->serial->minor, count); + buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number + - edge_port->port->serial->minor, count); + buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number + - edge_port->port->serial->minor, count); /* now copy our data */ bytesleft = fifo->size - fifo->tail; - firsthalf = min (bytesleft, count); + firsthalf = min(bytesleft, count); memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf); fifo->tail += firsthalf; fifo->count -= firsthalf; - if (fifo->tail == fifo->size) { + if (fifo->tail == fifo->size) fifo->tail = 0; - } secondhalf = count-firsthalf; if (secondhalf) { - memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], secondhalf); + memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], + secondhalf); fifo->tail += secondhalf; fifo->count -= secondhalf; } if (count) - usb_serial_debug_data(debug, &edge_port->port->dev, __func__, count, &buffer[2]); + usb_serial_debug_data(debug, &edge_port->port->dev, + __func__, count, &buffer[2]); /* fill up the urb with all of our data and submit it */ - usb_fill_bulk_urb (urb, edge_serial->serial->dev, - usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint), - buffer, count+2, edge_bulk_out_data_callback, edge_port); + usb_fill_bulk_urb(urb, edge_serial->serial->dev, + usb_sndbulkpipe(edge_serial->serial->dev, + edge_serial->bulk_out_endpoint), + buffer, count+2, + edge_bulk_out_data_callback, edge_port); /* decrement the number of credits we have by the number we just sent */ edge_port->txCredits -= count; @@ -1289,14 +1370,17 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __func__, status); + dev_err(&edge_port->port->dev, + "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", + __func__, status); edge_port->write_in_progress = false; /* revert the credits as something bad happened. */ edge_port->txCredits += count; edge_port->icount.tx -= count; } - dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __func__, count, edge_port->txCredits, fifo->count); + dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", + __func__, count, edge_port->txCredits, fifo->count); exit_send: spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1305,11 +1389,10 @@ exit_send: /***************************************************************************** * edge_write_room - * this function is called by the tty driver when it wants to know how many - * bytes of data we can accept for a specific port. - * If successful, we return the amount of room that we have for this port - * (the txCredits), - * Otherwise we return a negative error number. + * this function is called by the tty driver when it wants to know how + * many bytes of data we can accept for a specific port. If successful, + * we return the amount of room that we have for this port (the txCredits) + * otherwise we return a negative error number. *****************************************************************************/ static int edge_write_room(struct tty_struct *tty) { @@ -1332,7 +1415,7 @@ static int edge_write_room(struct tty_struct *tty) return -EINVAL; } - // total of both buffers is still txCredit + /* total of both buffers is still txCredit */ spin_lock_irqsave(&edge_port->ep_lock, flags); room = edge_port->txCredits - edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1344,11 +1427,11 @@ static int edge_write_room(struct tty_struct *tty) /***************************************************************************** * edge_chars_in_buffer - * this function is called by the tty driver when it wants to know how many - * bytes of data we currently have outstanding in the port (data that has - * been written, but hasn't made it out the port yet) - * If successful, we return the number of bytes left to be written in the - * system, + * this function is called by the tty driver when it wants to know how + * many bytes of data we currently have outstanding in the port (data that + * has been written, but hasn't made it out the port yet) + * If successful, we return the number of bytes left to be written in the + * system, * Otherwise we return a negative error number. *****************************************************************************/ static int edge_chars_in_buffer(struct tty_struct *tty) @@ -1371,10 +1454,12 @@ static int edge_chars_in_buffer(struct tty_struct *tty) } spin_lock_irqsave(&edge_port->ep_lock, flags); - num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count; + num_chars = edge_port->maxTxCredits - edge_port->txCredits + + edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); if (num_chars) { - dbg("%s(port %d) - returns %d", __func__, port->number, num_chars); + dbg("%s(port %d) - returns %d", __func__, + port->number, num_chars); } return num_chars; @@ -1405,19 +1490,18 @@ static void edge_throttle(struct tty_struct *tty) /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); - status = edge_write (tty, port, &stop_char, 1); - if (status <= 0) { + status = edge_write(tty, port, &stop_char, 1); + if (status <= 0) return; - } } /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { edge_port->shadowMCR &= ~MCR_RTS; - status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); - if (status != 0) { + status = send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); + if (status != 0) return; - } } return; @@ -1426,8 +1510,8 @@ static void edge_throttle(struct tty_struct *tty) /***************************************************************************** * edge_unthrottle - * this function is called by the tty driver when it wants to resume the data - * being read from the port (called after SerialThrottle is called) + * this function is called by the tty driver when it wants to resume the + * data being read from the port (called after SerialThrottle is called) *****************************************************************************/ static void edge_unthrottle(struct tty_struct *tty) { @@ -1455,14 +1539,16 @@ static void edge_unthrottle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { edge_port->shadowMCR |= MCR_RTS; - send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); + send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); } } /***************************************************************************** * SerialSetTermios - * this function is called by the tty driver when it wants to change the termios structure + * this function is called by the tty driver when it wants to change + * the termios structure *****************************************************************************/ static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) @@ -1499,9 +1585,10 @@ static void edge_set_termios(struct tty_struct *tty, * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. + * allows an RS485 driver to be written in user space. *****************************************************************************/ -static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *value) +static int get_lsr_info(struct edgeport_port *edge_port, + unsigned int __user *value) { unsigned int result = 0; unsigned long flags; @@ -1519,7 +1606,8 @@ static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *va return 0; } -static int edge_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) +static int edge_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); @@ -1574,7 +1662,8 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo) +static int get_serial_info(struct edgeport_port *edge_port, + struct serial_struct __user *retinfo) { struct serial_struct tmp; @@ -1617,60 +1706,61 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file, dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { - case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); - return get_lsr_info(edge_port, (unsigned int __user *) arg); - - case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); - return get_serial_info(edge_port, (struct serial_struct __user *) arg); - - case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); - cprev = edge_port->icount; - while (1) { - prepare_to_wait(&edge_port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE); - schedule(); - finish_wait(&edge_port->delta_msr_wait, &wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = edge_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; + case TIOCSERGETLSR: + dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + return get_lsr_info(edge_port, (unsigned int __user *) arg); + + case TIOCGSERIAL: + dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + return get_serial_info(edge_port, (struct serial_struct __user *) arg); + + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + cprev = edge_port->icount; + while (1) { + prepare_to_wait(&edge_port->delta_msr_wait, + &wait, TASK_INTERRUPTIBLE); + schedule(); + finish_wait(&edge_port->delta_msr_wait, &wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + cnow = edge_port->icount; + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + return 0; } - /* NOTREACHED */ - break; + cprev = cnow; + } + /* NOTREACHED */ + break; - case TIOCGICOUNT: - cnow = edge_port->icount; - memset(&icount, 0, sizeof(icount)); - icount.cts = cnow.cts; - icount.dsr = cnow.dsr; - icount.rng = cnow.rng; - icount.dcd = cnow.dcd; - icount.rx = cnow.rx; - icount.tx = cnow.tx; - icount.frame = cnow.frame; - icount.overrun = cnow.overrun; - icount.parity = cnow.parity; - icount.brk = cnow.brk; - icount.buf_overrun = cnow.buf_overrun; - - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, icount.rx, icount.tx ); - if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) - return -EFAULT; - return 0; + case TIOCGICOUNT: + cnow = edge_port->icount; + memset(&icount, 0, sizeof(icount)); + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", + __func__, port->number, icount.rx, icount.tx); + if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) + return -EFAULT; + return 0; } - return -ENOIOCTLCMD; } @@ -1679,7 +1769,7 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file, * SerialBreak * this function sends a break to the port *****************************************************************************/ -static void edge_break (struct tty_struct *tty, int break_state) +static void edge_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); @@ -1693,9 +1783,9 @@ static void edge_break (struct tty_struct *tty, int break_state) edge_port->chaseResponsePending = true; dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); - status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); + status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); if (status == 0) { - // block until chase finished + /* block until chase finished */ block_until_chase_response(edge_port); } else { edge_port->chaseResponsePending = false; @@ -1707,14 +1797,16 @@ static void edge_break (struct tty_struct *tty, int break_state) (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) { if (break_state == -1) { dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__); - status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0); + status = send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_BREAK, 0); } else { dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__); - status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0); - } - if (status) { - dbg("%s - error sending break set/clear command.", __func__); + status = send_iosp_ext_cmd(edge_port, + IOSP_CMD_CLEAR_BREAK, 0); } + if (status) + dbg("%s - error sending break set/clear command.", + __func__); } return; @@ -1725,7 +1817,8 @@ static void edge_break (struct tty_struct *tty, int break_state) * process_rcvd_data * this function handles the data received on the bulk in pipe. *****************************************************************************/ -static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char * buffer, __u16 bufferLength) +static void process_rcvd_data(struct edgeport_serial *edge_serial, + unsigned char *buffer, __u16 bufferLength) { struct usb_serial_port *port; struct edgeport_port *edge_port; @@ -1746,105 +1839,123 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha lastBufferLength = bufferLength; switch (edge_serial->rxState) { - case EXPECT_HDR1: - edge_serial->rxHeader1 = *buffer; - ++buffer; - --bufferLength; + case EXPECT_HDR1: + edge_serial->rxHeader1 = *buffer; + ++buffer; + --bufferLength; - if (bufferLength == 0) { - edge_serial->rxState = EXPECT_HDR2; + if (bufferLength == 0) { + edge_serial->rxState = EXPECT_HDR2; + break; + } + /* otherwise, drop on through */ + case EXPECT_HDR2: + edge_serial->rxHeader2 = *buffer; + ++buffer; + --bufferLength; + + dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, + edge_serial->rxHeader1, edge_serial->rxHeader2); + /* Process depending on whether this header is + * data or status */ + + if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { + /* Decode this status header and go to + * EXPECT_HDR1 (if we can process the status + * with only 2 bytes), or go to EXPECT_HDR3 to + * get the third byte. */ + edge_serial->rxPort = + IOSP_GET_HDR_PORT(edge_serial->rxHeader1); + edge_serial->rxStatusCode = + IOSP_GET_STATUS_CODE( + edge_serial->rxHeader1); + + if (!IOSP_STATUS_IS_2BYTE( + edge_serial->rxStatusCode)) { + /* This status needs additional bytes. + * Save what we have and then wait for + * more data. + */ + edge_serial->rxStatusParam + = edge_serial->rxHeader2; + edge_serial->rxState = EXPECT_HDR3; break; } - /* otherwise, drop on through */ - - case EXPECT_HDR2: - edge_serial->rxHeader2 = *buffer; - ++buffer; - --bufferLength; - - dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, edge_serial->rxHeader1, edge_serial->rxHeader2); - - // Process depending on whether this header is - // data or status - - if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { - // Decode this status header and goto EXPECT_HDR1 (if we - // can process the status with only 2 bytes), or goto - // EXPECT_HDR3 to get the third byte. - - edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1); - edge_serial->rxStatusCode = IOSP_GET_STATUS_CODE(edge_serial->rxHeader1); - - if (!IOSP_STATUS_IS_2BYTE(edge_serial->rxStatusCode)) { - // This status needs additional bytes. Save what we have - // and then wait for more data. - edge_serial->rxStatusParam = edge_serial->rxHeader2; - - edge_serial->rxState = EXPECT_HDR3; - break; - } + /* We have all the header bytes, process the + status now */ + process_rcvd_status(edge_serial, + edge_serial->rxHeader2, 0); + edge_serial->rxState = EXPECT_HDR1; + break; + } else { + edge_serial->rxPort = + IOSP_GET_HDR_PORT(edge_serial->rxHeader1); + edge_serial->rxBytesRemaining = + IOSP_GET_HDR_DATA_LEN( + edge_serial->rxHeader1, + edge_serial->rxHeader2); + dbg("%s - Data for Port %u Len %u", + __func__, + edge_serial->rxPort, + edge_serial->rxBytesRemaining); + + /* ASSERT(DevExt->RxPort < DevExt->NumPorts); + * ASSERT(DevExt->RxBytesRemaining < + * IOSP_MAX_DATA_LENGTH); + */ - // We have all the header bytes, process the status now - process_rcvd_status (edge_serial, edge_serial->rxHeader2, 0); - edge_serial->rxState = EXPECT_HDR1; + if (bufferLength == 0) { + edge_serial->rxState = EXPECT_DATA; break; - } else { - edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1); - edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2); - - dbg("%s - Data for Port %u Len %u", __func__, edge_serial->rxPort, edge_serial->rxBytesRemaining); - - //ASSERT( DevExt->RxPort < DevExt->NumPorts ); - //ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH ); - - if (bufferLength == 0 ) { - edge_serial->rxState = EXPECT_DATA; - break; - } - // Else, drop through } + /* Else, drop through */ + } + case EXPECT_DATA: /* Expect data */ + if (bufferLength < edge_serial->rxBytesRemaining) { + rxLen = bufferLength; + /* Expect data to start next buffer */ + edge_serial->rxState = EXPECT_DATA; + } else { + /* BufLen >= RxBytesRemaining */ + rxLen = edge_serial->rxBytesRemaining; + /* Start another header next time */ + edge_serial->rxState = EXPECT_HDR1; + } - case EXPECT_DATA: // Expect data - - if (bufferLength < edge_serial->rxBytesRemaining) { - rxLen = bufferLength; - edge_serial->rxState = EXPECT_DATA; // Expect data to start next buffer - } else { - // BufLen >= RxBytesRemaining - rxLen = edge_serial->rxBytesRemaining; - edge_serial->rxState = EXPECT_HDR1; // Start another header next time - } + bufferLength -= rxLen; + edge_serial->rxBytesRemaining -= rxLen; - bufferLength -= rxLen; - edge_serial->rxBytesRemaining -= rxLen; - - /* spit this data back into the tty driver if this port is open */ - if (rxLen) { - port = edge_serial->serial->port[edge_serial->rxPort]; - edge_port = usb_get_serial_port_data(port); - if (edge_port->open) { - tty = edge_port->port->port.tty; - if (tty) { - dbg("%s - Sending %d bytes to TTY for port %d", __func__, rxLen, edge_serial->rxPort); - edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); - } - edge_port->icount.rx += rxLen; + /* spit this data back into the tty driver if this + port is open */ + if (rxLen) { + port = edge_serial->serial->port[ + edge_serial->rxPort]; + edge_port = usb_get_serial_port_data(port); + if (edge_port->open) { + tty = edge_port->port->port.tty; + if (tty) { + dbg("%s - Sending %d bytes to TTY for port %d", + __func__, rxLen, edge_serial->rxPort); + edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); } - buffer += rxLen; + edge_port->icount.rx += rxLen; } + buffer += rxLen; + } + break; - break; - - case EXPECT_HDR3: // Expect 3rd byte of status header - edge_serial->rxHeader3 = *buffer; - ++buffer; - --bufferLength; - - // We have all the header bytes, process the status now - process_rcvd_status (edge_serial, edge_serial->rxStatusParam, edge_serial->rxHeader3); - edge_serial->rxState = EXPECT_HDR1; - break; - + case EXPECT_HDR3: /* Expect 3rd byte of status header */ + edge_serial->rxHeader3 = *buffer; + ++buffer; + --bufferLength; + + /* We have all the header bytes, process the + status now */ + process_rcvd_status(edge_serial, + edge_serial->rxStatusParam, + edge_serial->rxHeader3); + edge_serial->rxState = EXPECT_HDR1; + break; } } } @@ -1852,9 +1963,11 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha /***************************************************************************** * process_rcvd_status - * this function handles the any status messages received on the bulk in pipe. + * this function handles the any status messages received on the + * bulk in pipe. *****************************************************************************/ -static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3) +static void process_rcvd_status(struct edgeport_serial *edge_serial, + __u8 byte2, __u8 byte3) { struct usb_serial_port *port; struct edgeport_port *edge_port; @@ -1864,7 +1977,9 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 port = edge_serial->serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port == NULL) { - dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __func__, edge_serial->rxPort); + dev_err(&edge_serial->serial->dev->dev, + "%s - edge_port == NULL for port %d\n", + __func__, edge_serial->rxPort); return; } @@ -1872,22 +1987,28 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 if (code == IOSP_EXT_STATUS) { switch (byte2) { - case IOSP_EXT_STATUS_CHASE_RSP: - // we want to do EXT status regardless of port open/closed - dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __func__, edge_serial->rxPort, byte3 ); - // Currently, the only EXT_STATUS is Chase, so process here instead of one more call - // to one more subroutine. If/when more EXT_STATUS, there'll be more work to do. - // Also, we currently clear flag and close the port regardless of content of above's Byte3. - // We could choose to do something else when Byte3 says Timeout on Chase from Edgeport, - // like wait longer in block_until_chase_response, but for now we don't. - edge_port->chaseResponsePending = false; - wake_up (&edge_port->wait_chase); - return; + case IOSP_EXT_STATUS_CHASE_RSP: + /* we want to do EXT status regardless of port + * open/closed */ + dbg("%s - Port %u EXT CHASE_RSP Data = %02x", + __func__, edge_serial->rxPort, byte3); + /* Currently, the only EXT_STATUS is Chase, so process + * here instead of one more call to one more subroutine + * If/when more EXT_STATUS, there'll be more work to do + * Also, we currently clear flag and close the port + * regardless of content of above's Byte3. + * We could choose to do something else when Byte3 says + * Timeout on Chase from Edgeport, like wait longer in + * block_until_chase_response, but for now we don't. + */ + edge_port->chaseResponsePending = false; + wake_up(&edge_port->wait_chase); + return; - case IOSP_EXT_STATUS_RX_CHECK_RSP: - dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3 ); - //Port->RxCheckRsp = true; - return; + case IOSP_EXT_STATUS_RX_CHECK_RSP: + dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3); + /* Port->RxCheckRsp = true; */ + return; } } @@ -1895,12 +2016,14 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); edge_port->maxTxCredits = edge_port->txCredits; dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits); - handle_new_msr (edge_port, byte2); + handle_new_msr(edge_port, byte2); - /* send the current line settings to the port so we are in sync with any further termios calls */ + /* send the current line settings to the port so we are + in sync with any further termios calls */ /* FIXME: locking on tty */ if (edge_port->port->port.tty) - change_port_settings(edge_port->port->port.tty, edge_port, edge_port->port->port.tty->termios); + change_port_settings(edge_port->port->port.tty, + edge_port, edge_port->port->port.tty->termios); /* we have completed the open */ edge_port->openPending = false; @@ -1909,45 +2032,49 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 return; } - // If port is closed, silently discard all rcvd status. We can - // have cases where buffered status is received AFTER the close - // port command is sent to the Edgeport. - if (!edge_port->open || edge_port->closePending) { + /* If port is closed, silently discard all rcvd status. We can + * have cases where buffered status is received AFTER the close + * port command is sent to the Edgeport. + */ + if (!edge_port->open || edge_port->closePending) return; - } switch (code) { - // Not currently sent by Edgeport - case IOSP_STATUS_LSR: - dbg("%s - Port %u LSR Status = %02x", __func__, edge_serial->rxPort, byte2); - handle_new_lsr(edge_port, false, byte2, 0); - break; + /* Not currently sent by Edgeport */ + case IOSP_STATUS_LSR: + dbg("%s - Port %u LSR Status = %02x", + __func__, edge_serial->rxPort, byte2); + handle_new_lsr(edge_port, false, byte2, 0); + break; - case IOSP_STATUS_LSR_DATA: - dbg("%s - Port %u LSR Status = %02x, Data = %02x", __func__, edge_serial->rxPort, byte2, byte3); - // byte2 is LSR Register - // byte3 is broken data byte - handle_new_lsr(edge_port, true, byte2, byte3); - break; - // - // case IOSP_EXT_4_STATUS: - // dbg("%s - Port %u LSR Status = %02x Data = %02x", __func__, edge_serial->rxPort, byte2, byte3); - // break; - // - case IOSP_STATUS_MSR: - dbg("%s - Port %u MSR Status = %02x", __func__, edge_serial->rxPort, byte2); - - // Process this new modem status and generate appropriate - // events, etc, based on the new status. This routine - // also saves the MSR in Port->ShadowMsr. - handle_new_msr(edge_port, byte2); - break; + case IOSP_STATUS_LSR_DATA: + dbg("%s - Port %u LSR Status = %02x, Data = %02x", + __func__, edge_serial->rxPort, byte2, byte3); + /* byte2 is LSR Register */ + /* byte3 is broken data byte */ + handle_new_lsr(edge_port, true, byte2, byte3); + break; + /* + * case IOSP_EXT_4_STATUS: + * dbg("%s - Port %u LSR Status = %02x Data = %02x", + * __func__, edge_serial->rxPort, byte2, byte3); + * break; + */ + case IOSP_STATUS_MSR: + dbg("%s - Port %u MSR Status = %02x", + __func__, edge_serial->rxPort, byte2); + /* + * Process this new modem status and generate appropriate + * events, etc, based on the new status. This routine + * also saves the MSR in Port->ShadowMsr. + */ + handle_new_msr(edge_port, byte2); + break; - default: - dbg("%s - Unrecognized IOSP status code %u\n", __func__, code); - break; + default: + dbg("%s - Unrecognized IOSP status code %u\n", __func__, code); + break; } - return; } @@ -1956,7 +2083,8 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 * edge_tty_recv * this function passes data on to the tty flip buffer *****************************************************************************/ -static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length) +static void edge_tty_recv(struct device *dev, struct tty_struct *tty, + unsigned char *data, int length) { int cnt; @@ -1965,7 +2093,7 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned c if (cnt < length) { dev_err(dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); - if(cnt == 0) + if (cnt == 0) break; } tty_insert_flip_string(tty, data, cnt); @@ -1987,22 +2115,19 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) dbg("%s %02x", __func__, newMsr); - if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { + if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | + EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { icount = &edge_port->icount; /* update input line counters */ - if (newMsr & EDGEPORT_MSR_DELTA_CTS) { + if (newMsr & EDGEPORT_MSR_DELTA_CTS) icount->cts++; - } - if (newMsr & EDGEPORT_MSR_DELTA_DSR) { + if (newMsr & EDGEPORT_MSR_DELTA_DSR) icount->dsr++; - } - if (newMsr & EDGEPORT_MSR_DELTA_CD) { + if (newMsr & EDGEPORT_MSR_DELTA_CD) icount->dcd++; - } - if (newMsr & EDGEPORT_MSR_DELTA_RI) { + if (newMsr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - } wake_up_interruptible(&edge_port->delta_msr_wait); } @@ -2017,42 +2142,41 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) * handle_new_lsr * this function handles any change to the lsr register for a port. *****************************************************************************/ -static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data) +static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, + __u8 lsr, __u8 data) { - __u8 newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); - struct async_icount *icount; + __u8 newLsr = (__u8) (lsr & (__u8) + (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); + struct async_icount *icount; dbg("%s - %02x", __func__, newLsr); edge_port->shadowLSR = lsr; if (newLsr & LSR_BREAK) { - // - // Parity and Framing errors only count if they - // occur exclusive of a break being - // received. - // + /* + * Parity and Framing errors only count if they + * occur exclusive of a break being + * received. + */ newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); } /* Place LSR data byte into Rx buffer */ if (lsrData && edge_port->port->port.tty) - edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1); + edge_tty_recv(&edge_port->port->dev, + edge_port->port->port.tty, &data, 1); /* update input line counters */ icount = &edge_port->icount; - if (newLsr & LSR_BREAK) { + if (newLsr & LSR_BREAK) icount->brk++; - } - if (newLsr & LSR_OVER_ERR) { + if (newLsr & LSR_OVER_ERR) icount->overrun++; - } - if (newLsr & LSR_PAR_ERR) { + if (newLsr & LSR_PAR_ERR) icount->parity++; - } - if (newLsr & LSR_FRM_ERR) { + if (newLsr & LSR_FRM_ERR) icount->frame++; - } return; } @@ -2060,12 +2184,13 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 l /**************************************************************************** * sram_write - * writes a number of bytes to the Edgeport device's sram starting at the + * writes a number of bytes to the Edgeport device's sram starting at the * given address. * If successful returns the number of bytes written, otherwise it returns * a negative error number of the problem. ****************************************************************************/ -static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data) +static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data) { int result; __u16 current_length; @@ -2073,32 +2198,37 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1 dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); - transfer_buffer = kmalloc (64, GFP_KERNEL); + transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, 64); return -ENOMEM; } /* need to split these writes up into 64 byte chunks */ result = 0; while (length > 0) { - if (length > 64) { + if (length > 64) current_length = 64; - } else { + else current_length = length; - } -// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length); - memcpy (transfer_buffer, data, current_length); - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM, - 0x40, addr, extAddr, transfer_buffer, current_length, 300); + +/* dbg("%s - writing %x, %x, %d", __func__, + extAddr, addr, current_length); */ + memcpy(transfer_buffer, data, current_length); + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + USB_REQUEST_ION_WRITE_RAM, + 0x40, addr, extAddr, transfer_buffer, + current_length, 300); if (result < 0) break; length -= current_length; addr += current_length; data += current_length; - } + } - kfree (transfer_buffer); + kfree(transfer_buffer); return result; } @@ -2110,40 +2240,45 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1 * If successful returns the number of bytes written, otherwise it returns * a negative error number of the problem. ****************************************************************************/ -static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data) +static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data) { int result; __u16 current_length; unsigned char *transfer_buffer; -// dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); +/* dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */ - transfer_buffer = kmalloc (64, GFP_KERNEL); + transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, 64); return -ENOMEM; } /* need to split these writes up into 64 byte chunks */ result = 0; while (length > 0) { - if (length > 64) { + if (length > 64) current_length = 64; - } else { + else current_length = length; - } -// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length); - memcpy (transfer_buffer, data, current_length); - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM, - 0x40, addr, extAddr, transfer_buffer, current_length, 300); +/* dbg("%s - writing %x, %x, %d", __func__, + extAddr, addr, current_length); */ + memcpy(transfer_buffer, data, current_length); + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + USB_REQUEST_ION_WRITE_ROM, 0x40, + addr, extAddr, + transfer_buffer, current_length, 300); if (result < 0) break; length -= current_length; addr += current_length; data += current_length; - } + } - kfree (transfer_buffer); + kfree(transfer_buffer); return result; } @@ -2155,7 +2290,8 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 * If successful returns the number of bytes read, otherwise it returns * a negative error number of the problem. ****************************************************************************/ -static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data) +static int rom_read(struct usb_serial *serial, __u16 extAddr, + __u16 addr, __u16 length, __u8 *data) { int result; __u16 current_length; @@ -2163,32 +2299,36 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); - transfer_buffer = kmalloc (64, GFP_KERNEL); + transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); + dev_err(&serial->dev->dev, + "%s - kmalloc(%d) failed.\n", __func__, 64); return -ENOMEM; } /* need to split these reads up into 64 byte chunks */ result = 0; while (length > 0) { - if (length > 64) { + if (length > 64) current_length = 64; - } else { + else current_length = length; - } -// dbg("%s - %x, %x, %d", __func__, extAddr, addr, current_length); - result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM, - 0xC0, addr, extAddr, transfer_buffer, current_length, 300); +/* dbg("%s - %x, %x, %d", __func__, + extAddr, addr, current_length); */ + result = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + USB_REQUEST_ION_READ_ROM, + 0xC0, addr, extAddr, transfer_buffer, + current_length, 300); if (result < 0) break; - memcpy (data, transfer_buffer, current_length); + memcpy(data, transfer_buffer, current_length); length -= current_length; addr += current_length; data += current_length; - } + } - kfree (transfer_buffer); + kfree(transfer_buffer); return result; } @@ -2197,7 +2337,8 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 * send_iosp_ext_cmd * Is used to send a IOSP message to the Edgeport device ****************************************************************************/ -static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param) +static int send_iosp_ext_cmd(struct edgeport_port *edge_port, + __u8 command, __u8 param) { unsigned char *buffer; unsigned char *currentCommand; @@ -2206,19 +2347,20 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u dbg("%s - %d, %d", __func__, command, param); - buffer = kmalloc (10, GFP_ATOMIC); + buffer = kmalloc(10, GFP_ATOMIC); if (!buffer) { - dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 10); + dev_err(&edge_port->port->dev, + "%s - kmalloc(%d) failed.\n", __func__, 10); return -ENOMEM; } currentCommand = buffer; - MAKE_CMD_EXT_CMD (¤tCommand, &length, - edge_port->port->number - edge_port->port->serial->minor, - command, param); + MAKE_CMD_EXT_CMD(¤tCommand, &length, + edge_port->port->number - edge_port->port->serial->minor, + command, param); - status = write_cmd_usb (edge_port, buffer, length); + status = write_cmd_usb(edge_port, buffer, length); if (status) { /* something bad happened, let's free up the memory */ kfree(buffer); @@ -2232,43 +2374,50 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u * write_cmd_usb * this function writes the given buffer out to the bulk write endpoint. *****************************************************************************/ -static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int length) +static int write_cmd_usb(struct edgeport_port *edge_port, + unsigned char *buffer, int length) { - struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); int status = 0; struct urb *urb; int timeout; - usb_serial_debug_data(debug, &edge_port->port->dev, __func__, length, buffer); + usb_serial_debug_data(debug, &edge_port->port->dev, + __func__, length, buffer); /* Allocate our next urb */ - urb = usb_alloc_urb (0, GFP_ATOMIC); + urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) return -ENOMEM; atomic_inc(&CmdUrbs); - dbg("%s - ALLOCATE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs)); + dbg("%s - ALLOCATE URB %p (outstanding %d)", + __func__, urb, atomic_read(&CmdUrbs)); - usb_fill_bulk_urb (urb, edge_serial->serial->dev, - usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint), - buffer, length, edge_bulk_out_cmd_callback, edge_port); + usb_fill_bulk_urb(urb, edge_serial->serial->dev, + usb_sndbulkpipe(edge_serial->serial->dev, + edge_serial->bulk_out_endpoint), + buffer, length, edge_bulk_out_cmd_callback, edge_port); edge_port->commandPending = true; status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __func__, status); + dev_err(&edge_port->port->dev, + "%s - usb_submit_urb(write command) failed, status = %d\n", + __func__, status); usb_kill_urb(urb); usb_free_urb(urb); atomic_dec(&CmdUrbs); return status; } - // wait for command to finish + /* wait for command to finish */ timeout = COMMAND_TIMEOUT; #if 0 - wait_event (&edge_port->wait_command, !edge_port->commandPending); + wait_event(&edge_port->wait_command, !edge_port->commandPending); if (edge_port->commandPending) { /* command timed out */ @@ -2285,15 +2434,18 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer * this function sends the proper command to change the baud rate of the * specified port. *****************************************************************************/ -static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate) +static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, + int baudRate) { - struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); unsigned char *cmdBuffer; unsigned char *currCmd; int cmdLen = 0; int divisor; int status; - unsigned char number = edge_port->port->number - edge_port->port->serial->minor; + unsigned char number = + edge_port->port->number - edge_port->port->serial->minor; if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { @@ -2302,36 +2454,40 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa return 0; } - dbg("%s - port = %d, baud = %d", __func__, edge_port->port->number, baudRate); + dbg("%s - port = %d, baud = %d", __func__, + edge_port->port->number, baudRate); - status = calc_baud_rate_divisor (baudRate, &divisor); + status = calc_baud_rate_divisor(baudRate, &divisor); if (status) { - dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __func__); + dev_err(&edge_port->port->dev, "%s - bad baud rate\n", + __func__); return status; } - // Alloc memory for the string of commands. - cmdBuffer = kmalloc (0x100, GFP_ATOMIC); + /* Alloc memory for the string of commands. */ + cmdBuffer = kmalloc(0x100, GFP_ATOMIC); if (!cmdBuffer) { - dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100); + dev_err(&edge_port->port->dev, + "%s - kmalloc(%d) failed.\n", __func__, 0x100); return -ENOMEM; } currCmd = cmdBuffer; - // Enable access to divisor latch - MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE ); + /* Enable access to divisor latch */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE); - // Write the divisor itself - MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLL, LOW8 (divisor) ); - MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLM, HIGH8(divisor) ); + /* Write the divisor itself */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor)); + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor)); - // Restore original value to disable access to divisor latch - MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, edge_port->shadowLCR); + /* Restore original value to disable access to divisor latch */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, + edge_port->shadowLCR); - status = write_cmd_usb(edge_port, cmdBuffer, cmdLen ); + status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); if (status) { /* something bad happened, let's free up the memory */ - kfree (cmdBuffer); + kfree(cmdBuffer); } return status; @@ -2343,7 +2499,7 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int calc_baud_rate_divisor (int baudrate, int *divisor) +static int calc_baud_rate_divisor(int baudrate, int *divisor) { int i; __u16 custom; @@ -2352,17 +2508,17 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) dbg("%s - %d", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { - if ( divisor_table[i].BaudRate == baudrate ) { + if (divisor_table[i].BaudRate == baudrate) { *divisor = divisor_table[i].Divisor; return 0; } } - // We have tried all of the standard baud rates - // lets try to calculate the divisor for this baud rate - // Make sure the baud rate is reasonable + /* We have tried all of the standard baud rates + * lets try to calculate the divisor for this baud rate + * Make sure the baud rate is reasonable */ if (baudrate > 50 && baudrate < 230400) { - // get divisor + /* get divisor */ custom = (__u16)((230400L + baudrate/2) / baudrate); *divisor = custom; @@ -2377,17 +2533,20 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) /***************************************************************************** * send_cmd_write_uart_register - * this function builds up a uart register message and sends to to the device. + * this function builds up a uart register message and sends to to the device. *****************************************************************************/ -static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) +static int send_cmd_write_uart_register(struct edgeport_port *edge_port, + __u8 regNum, __u8 regValue) { - struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); unsigned char *cmdBuffer; unsigned char *currCmd; unsigned long cmdLen = 0; int status; - dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); + dbg("%s - write to %s register 0x%02x", + (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && @@ -2399,27 +2558,26 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && regNum == LCR) { - dbg ("SendCmdWriteUartReg - Not writing to LCR Register"); + dbg("SendCmdWriteUartReg - Not writing to LCR Register"); return 0; } - // Alloc memory for the string of commands. - cmdBuffer = kmalloc (0x10, GFP_ATOMIC); - if (cmdBuffer == NULL ) { + /* Alloc memory for the string of commands. */ + cmdBuffer = kmalloc(0x10, GFP_ATOMIC); + if (cmdBuffer == NULL) return -ENOMEM; - } currCmd = cmdBuffer; - // Build a cmd in the buffer to write the given register - MAKE_CMD_WRITE_REG (&currCmd, &cmdLen, - edge_port->port->number - edge_port->port->serial->minor, - regNum, regValue); + /* Build a cmd in the buffer to write the given register */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, + edge_port->port->number - edge_port->port->serial->minor, + regNum, regValue); status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); if (status) { /* something bad happened, let's free up the memory */ - kfree (cmdBuffer); + kfree(cmdBuffer); } return status; @@ -2428,14 +2586,15 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r /***************************************************************************** * change_port_settings - * This routine is called to set the UART on the device to match the specified - * new settings. + * This routine is called to set the UART on the device to match the + * specified new settings. *****************************************************************************/ static void change_port_settings(struct tty_struct *tty, struct edgeport_port *edge_port, struct ktermios *old_termios) { - struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); int baud; unsigned cflag; __u8 mask = 0xff; @@ -2457,11 +2616,23 @@ static void change_port_settings(struct tty_struct *tty, cflag = tty->termios->c_cflag; switch (cflag & CSIZE) { - case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __func__); break; - case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __func__); break; - case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __func__); break; - default: - case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __func__); break; + case CS5: + lData = LCR_BITS_5; mask = 0x1f; + dbg("%s - data bits = 5", __func__); + break; + case CS6: + lData = LCR_BITS_6; mask = 0x3f; + dbg("%s - data bits = 6", __func__); + break; + case CS7: + lData = LCR_BITS_7; mask = 0x7f; + dbg("%s - data bits = 7", __func__); + break; + default: + case CS8: + lData = LCR_BITS_8; + dbg("%s - data bits = 8", __func__); + break; } lParity = LCR_PAR_NONE; @@ -2503,7 +2674,8 @@ static void change_port_settings(struct tty_struct *tty, dbg("%s - RTS/CTS is disabled", __func__); } - /* if we are implementing XON/XOFF, set the start and stop character in the device */ + /* if we are implementing XON/XOFF, set the start and stop character + in the device */ if (I_IXOFF(tty) || I_IXON(tty)) { unsigned char stop_char = STOP_CHAR(tty); unsigned char start_char = START_CHAR(tty); @@ -2511,14 +2683,17 @@ static void change_port_settings(struct tty_struct *tty, if ((!edge_serial->is_epic) || ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) { - send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XON_CHAR, start_char); - send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XOFF_CHAR, stop_char); + send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_XON_CHAR, start_char); + send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_XOFF_CHAR, stop_char); } /* if we are implementing INBOUND XON/XOFF */ if (I_IXOFF(tty)) { rxFlow |= IOSP_RX_FLOW_XON_XOFF; - dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char); + dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", + __func__, start_char, stop_char); } else { dbg("%s - INBOUND XON/XOFF is disabled", __func__); } @@ -2526,7 +2701,8 @@ static void change_port_settings(struct tty_struct *tty, /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { txFlow |= IOSP_TX_FLOW_XON_XOFF; - dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char); + dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", + __func__, start_char, stop_char); } else { dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); } @@ -2549,20 +2725,20 @@ static void change_port_settings(struct tty_struct *tty, edge_port->validDataMask = mask; /* Send the updated LCR value to the EdgePort */ - status = send_cmd_write_uart_register(edge_port, LCR, edge_port->shadowLCR); - if (status != 0) { + status = send_cmd_write_uart_register(edge_port, LCR, + edge_port->shadowLCR); + if (status != 0) return; - } /* set up the MCR register and send it to the EdgePort */ edge_port->shadowMCR = MCR_MASTER_IE; - if (cflag & CBAUD) { + if (cflag & CBAUD) edge_port->shadowMCR |= (MCR_DTR | MCR_RTS); - } - status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); - if (status != 0) { + + status = send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); + if (status != 0) return; - } /* Determine divisor based on baud rate */ baud = tty_get_baud_rate(tty); @@ -2572,7 +2748,7 @@ static void change_port_settings(struct tty_struct *tty, } dbg("%s - baud rate = %d", __func__, baud); - status = send_cmd_write_baud_rate (edge_port, baud); + status = send_cmd_write_baud_rate(edge_port, baud); if (status == -1) { /* Speed change was not possible - put back the old speed */ baud = tty_termios_baud_rate(old_termios); @@ -2589,7 +2765,8 @@ static void change_port_settings(struct tty_struct *tty, * ASCII range, but it's only for debugging... * NOTE: expects the unicode in LE format ****************************************************************************/ -static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size) +static void unicode_to_ascii(char *string, int buflen, + __le16 *unicode, int unicode_size) { int i; @@ -2608,75 +2785,99 @@ static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unic /**************************************************************************** * get_manufacturing_desc - * reads in the manufacturing descriptor and stores it into the serial + * reads in the manufacturing descriptor and stores it into the serial * structure. ****************************************************************************/ -static void get_manufacturing_desc (struct edgeport_serial *edge_serial) +static void get_manufacturing_desc(struct edgeport_serial *edge_serial) { int response; dbg("getting manufacturer descriptor"); - response = rom_read (edge_serial->serial, (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, - (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), EDGE_MANUF_DESC_LEN, - (__u8 *)(&edge_serial->manuf_descriptor)); + response = rom_read(edge_serial->serial, + (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, + (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), + EDGE_MANUF_DESC_LEN, + (__u8 *)(&edge_serial->manuf_descriptor)); - if (response < 1) { - dev_err(&edge_serial->serial->dev->dev, "error in getting manufacturer descriptor\n"); - } else { + if (response < 1) + dev_err(&edge_serial->serial->dev->dev, + "error in getting manufacturer descriptor\n"); + else { char string[30]; dbg("**Manufacturer Descriptor"); - dbg(" RomSize: %dK", edge_serial->manuf_descriptor.RomSize); - dbg(" RamSize: %dK", edge_serial->manuf_descriptor.RamSize); - dbg(" CpuRev: %d", edge_serial->manuf_descriptor.CpuRev); - dbg(" BoardRev: %d", edge_serial->manuf_descriptor.BoardRev); - dbg(" NumPorts: %d", edge_serial->manuf_descriptor.NumPorts); - dbg(" DescDate: %d/%d/%d", edge_serial->manuf_descriptor.DescDate[0], edge_serial->manuf_descriptor.DescDate[1], edge_serial->manuf_descriptor.DescDate[2]+1900); + dbg(" RomSize: %dK", + edge_serial->manuf_descriptor.RomSize); + dbg(" RamSize: %dK", + edge_serial->manuf_descriptor.RamSize); + dbg(" CpuRev: %d", + edge_serial->manuf_descriptor.CpuRev); + dbg(" BoardRev: %d", + edge_serial->manuf_descriptor.BoardRev); + dbg(" NumPorts: %d", + edge_serial->manuf_descriptor.NumPorts); + dbg(" DescDate: %d/%d/%d", + edge_serial->manuf_descriptor.DescDate[0], + edge_serial->manuf_descriptor.DescDate[1], + edge_serial->manuf_descriptor.DescDate[2]+1900); unicode_to_ascii(string, sizeof(string), - edge_serial->manuf_descriptor.SerialNumber, - edge_serial->manuf_descriptor.SerNumLength/2); + edge_serial->manuf_descriptor.SerialNumber, + edge_serial->manuf_descriptor.SerNumLength/2); dbg(" SerialNumber: %s", string); unicode_to_ascii(string, sizeof(string), - edge_serial->manuf_descriptor.AssemblyNumber, - edge_serial->manuf_descriptor.AssemblyNumLength/2); + edge_serial->manuf_descriptor.AssemblyNumber, + edge_serial->manuf_descriptor.AssemblyNumLength/2); dbg(" AssemblyNumber: %s", string); unicode_to_ascii(string, sizeof(string), edge_serial->manuf_descriptor.OemAssyNumber, edge_serial->manuf_descriptor.OemAssyNumLength/2); dbg(" OemAssyNumber: %s", string); - dbg(" UartType: %d", edge_serial->manuf_descriptor.UartType); - dbg(" IonPid: %d", edge_serial->manuf_descriptor.IonPid); - dbg(" IonConfig: %d", edge_serial->manuf_descriptor.IonConfig); + dbg(" UartType: %d", + edge_serial->manuf_descriptor.UartType); + dbg(" IonPid: %d", + edge_serial->manuf_descriptor.IonPid); + dbg(" IonConfig: %d", + edge_serial->manuf_descriptor.IonConfig); } } /**************************************************************************** * get_boot_desc - * reads in the bootloader descriptor and stores it into the serial + * reads in the bootloader descriptor and stores it into the serial * structure. ****************************************************************************/ -static void get_boot_desc (struct edgeport_serial *edge_serial) +static void get_boot_desc(struct edgeport_serial *edge_serial) { int response; dbg("getting boot descriptor"); - response = rom_read (edge_serial->serial, (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, - (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), EDGE_BOOT_DESC_LEN, - (__u8 *)(&edge_serial->boot_descriptor)); + response = rom_read(edge_serial->serial, + (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, + (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), + EDGE_BOOT_DESC_LEN, + (__u8 *)(&edge_serial->boot_descriptor)); - if (response < 1) { - dev_err(&edge_serial->serial->dev->dev, "error in getting boot descriptor\n"); - } else { + if (response < 1) + dev_err(&edge_serial->serial->dev->dev, + "error in getting boot descriptor\n"); + else { dbg("**Boot Descriptor:"); - dbg(" BootCodeLength: %d", le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); - dbg(" MajorVersion: %d", edge_serial->boot_descriptor.MajorVersion); - dbg(" MinorVersion: %d", edge_serial->boot_descriptor.MinorVersion); - dbg(" BuildNumber: %d", le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); - dbg(" Capabilities: 0x%x", le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); - dbg(" UConfig0: %d", edge_serial->boot_descriptor.UConfig0); - dbg(" UConfig1: %d", edge_serial->boot_descriptor.UConfig1); + dbg(" BootCodeLength: %d", + le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); + dbg(" MajorVersion: %d", + edge_serial->boot_descriptor.MajorVersion); + dbg(" MinorVersion: %d", + edge_serial->boot_descriptor.MinorVersion); + dbg(" BuildNumber: %d", + le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); + dbg(" Capabilities: 0x%x", + le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); + dbg(" UConfig0: %d", + edge_serial->boot_descriptor.UConfig0); + dbg(" UConfig1: %d", + edge_serial->boot_descriptor.UConfig1); } } @@ -2685,7 +2886,7 @@ static void get_boot_desc (struct edgeport_serial *edge_serial) * load_application_firmware * This is called to load the application firmware to the device ****************************************************************************/ -static void load_application_firmware (struct edgeport_serial *edge_serial) +static void load_application_firmware(struct edgeport_serial *edge_serial) { const struct ihex_binrec *rec; const struct firmware *fw; @@ -2762,7 +2963,7 @@ static void load_application_firmware (struct edgeport_serial *edge_serial) /**************************************************************************** * edge_startup ****************************************************************************/ -static int edge_startup (struct usb_serial *serial) +static int edge_startup(struct usb_serial *serial) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; @@ -2804,10 +3005,10 @@ static int edge_startup (struct usb_serial *serial) sizeof(struct edge_compatibility_bits)); /* get the manufacturing descriptor for this device */ - get_manufacturing_desc (edge_serial); + get_manufacturing_desc(edge_serial); /* get the boot descriptor */ - get_boot_desc (edge_serial); + get_boot_desc(edge_serial); get_product_info(edge_serial); } @@ -2828,41 +3029,43 @@ static int edge_startup (struct usb_serial *serial) /* If not an EPiC device */ if (!edge_serial->is_epic) { /* now load the application firmware into this device */ - load_application_firmware (edge_serial); + load_application_firmware(edge_serial); dbg("%s - time 2 %ld", __func__, jiffies); /* Check current Edgeport EEPROM and update if necessary */ - update_edgeport_E2PROM (edge_serial); + update_edgeport_E2PROM(edge_serial); dbg("%s - time 3 %ld", __func__, jiffies); /* set the configuration to use #1 */ -// dbg("set_configuration 1"); -// usb_set_configuration (dev, 1); +/* dbg("set_configuration 1"); */ +/* usb_set_configuration (dev, 1); */ } dbg(" FirmwareMajorVersion %d.%d.%d", edge_serial->product_info.FirmwareMajorVersion, edge_serial->product_info.FirmwareMinorVersion, le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); - /* we set up the pointers to the endpoints in the edge_open function, + /* we set up the pointers to the endpoints in the edge_open function, * as the structures aren't created yet. */ /* set up our port private structures */ for (i = 0; i < serial->num_ports; ++i) { - edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL); + edge_port = kmalloc(sizeof(struct edgeport_port), GFP_KERNEL); if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", + __func__); for (j = 0; j < i; ++j) { - kfree (usb_get_serial_port_data(serial->port[j])); - usb_set_serial_port_data(serial->port[j], NULL); + kfree(usb_get_serial_port_data(serial->port[j])); + usb_set_serial_port_data(serial->port[j], + NULL); } usb_set_serial_data(serial, NULL); kfree(edge_serial); return -ENOMEM; } - memset (edge_port, 0, sizeof(struct edgeport_port)); + memset(edge_port, 0, sizeof(struct edgeport_port)); spin_lock_init(&edge_port->ep_lock); edge_port->port = serial->port[i]; usb_set_serial_port_data(serial->port[i], edge_port); @@ -2871,14 +3074,16 @@ static int edge_startup (struct usb_serial *serial) response = 0; if (edge_serial->is_epic) { - /* EPIC thing, set up our interrupt polling now and our read urb, so - * that the device knows it really is connected. */ + /* EPIC thing, set up our interrupt polling now and our read + * urb, so that the device knows it really is connected. */ interrupt_in_found = bulk_in_found = bulk_out_found = false; - for (i = 0; i < serial->interface->altsetting[0].desc.bNumEndpoints; ++i) { + for (i = 0; i < serial->interface->altsetting[0] + .desc.bNumEndpoints; ++i) { struct usb_endpoint_descriptor *endpoint; int buffer_size; - endpoint = &serial->interface->altsetting[0].endpoint[i].desc; + endpoint = &serial->interface->altsetting[0]. + endpoint[i].desc; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); if (!interrupt_in_found && (usb_endpoint_is_int_in(endpoint))) { @@ -2886,58 +3091,67 @@ static int edge_startup (struct usb_serial *serial) dbg("found interrupt in"); /* not set up yet, so do it now */ - edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL); + edge_serial->interrupt_read_urb = + usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->interrupt_read_urb) { err("out of memory"); return -ENOMEM; } - edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); + edge_serial->interrupt_in_buffer = + kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->interrupt_in_buffer) { err("out of memory"); usb_free_urb(edge_serial->interrupt_read_urb); return -ENOMEM; } - edge_serial->interrupt_in_endpoint = endpoint->bEndpointAddress; + edge_serial->interrupt_in_endpoint = + endpoint->bEndpointAddress; /* set up our interrupt urb */ - usb_fill_int_urb(edge_serial->interrupt_read_urb, - dev, - usb_rcvintpipe(dev, endpoint->bEndpointAddress), - edge_serial->interrupt_in_buffer, - buffer_size, - edge_interrupt_callback, - edge_serial, - endpoint->bInterval); + usb_fill_int_urb( + edge_serial->interrupt_read_urb, + dev, + usb_rcvintpipe(dev, + endpoint->bEndpointAddress), + edge_serial->interrupt_in_buffer, + buffer_size, + edge_interrupt_callback, + edge_serial, + endpoint->bInterval); interrupt_in_found = true; } if (!bulk_in_found && - (usb_endpoint_is_bulk_in(endpoint))) { + (usb_endpoint_is_bulk_in(endpoint))) { /* we found a bulk in endpoint */ dbg("found bulk in"); /* not set up yet, so do it now */ - edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL); + edge_serial->read_urb = + usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->read_urb) { err("out of memory"); return -ENOMEM; } - edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); + edge_serial->bulk_in_buffer = + kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->bulk_in_buffer) { - err ("out of memory"); + err("out of memory"); usb_free_urb(edge_serial->read_urb); return -ENOMEM; } - edge_serial->bulk_in_endpoint = endpoint->bEndpointAddress; + edge_serial->bulk_in_endpoint = + endpoint->bEndpointAddress; /* set up our bulk in urb */ usb_fill_bulk_urb(edge_serial->read_urb, dev, - usb_rcvbulkpipe(dev, endpoint->bEndpointAddress), - edge_serial->bulk_in_buffer, - le16_to_cpu(endpoint->wMaxPacketSize), - edge_bulk_in_callback, - edge_serial); + usb_rcvbulkpipe(dev, + endpoint->bEndpointAddress), + edge_serial->bulk_in_buffer, + le16_to_cpu(endpoint->wMaxPacketSize), + edge_bulk_in_callback, + edge_serial); bulk_in_found = true; } @@ -2945,21 +3159,24 @@ static int edge_startup (struct usb_serial *serial) (usb_endpoint_is_bulk_out(endpoint))) { /* we found a bulk out endpoint */ dbg("found bulk out"); - edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress; + edge_serial->bulk_out_endpoint = + endpoint->bEndpointAddress; bulk_out_found = true; } } if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { - err ("Error - the proper endpoints were not found!"); + err("Error - the proper endpoints were not found!"); return -ENODEV; } /* start interrupt read for this edgeport this interrupt will * continue as long as the edgeport is connected */ - response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL); + response = usb_submit_urb(edge_serial->interrupt_read_urb, + GFP_KERNEL); if (response) - err("%s - Error %d submitting control urb", __func__, response); + err("%s - Error %d submitting control urb", + __func__, response); } return response; } @@ -2969,7 +3186,7 @@ static int edge_startup (struct usb_serial *serial) * edge_shutdown * This function is called whenever the device is removed from the usb bus. ****************************************************************************/ -static void edge_shutdown (struct usb_serial *serial) +static void edge_shutdown(struct usb_serial *serial) { struct edgeport_serial *edge_serial = usb_get_serial_data(serial); int i; @@ -2977,8 +3194,8 @@ static void edge_shutdown (struct usb_serial *serial) dbg("%s", __func__); /* stop reads and writes on all ports */ - for (i=0; i < serial->num_ports; ++i) { - kfree (usb_get_serial_port_data(serial->port[i])); + for (i = 0; i < serial->num_ports; ++i) { + kfree(usb_get_serial_port_data(serial->port[i])); usb_set_serial_port_data(serial->port[i], NULL); } /* free up our endpoint stuff */ @@ -3018,7 +3235,7 @@ static int __init edgeport_init(void) if (retval) goto failed_epic_device_register; retval = usb_register(&io_driver); - if (retval) + if (retval) goto failed_usb_register; atomic_set(&CmdUrbs, 0); info(DRIVER_DESC " " DRIVER_VERSION); @@ -3043,19 +3260,19 @@ failed_2port_device_register: ****************************************************************************/ static void __exit edgeport_exit (void) { - usb_deregister (&io_driver); - usb_serial_deregister (&edgeport_2port_device); - usb_serial_deregister (&edgeport_4port_device); - usb_serial_deregister (&edgeport_8port_device); - usb_serial_deregister (&epic_device); + usb_deregister(&io_driver); + usb_serial_deregister(&edgeport_2port_device); + usb_serial_deregister(&edgeport_4port_device); + usb_serial_deregister(&edgeport_8port_device); + usb_serial_deregister(&epic_device); } module_init(edgeport_init); module_exit(edgeport_exit); /* Module information */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("edgeport/boot.fw"); MODULE_FIRMWARE("edgeport/boot2.fw"); -- cgit v1.2.3-18-g5258