From 1cf93e0d5488e27270ece49e8c293d546140d144 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 28 Jun 2013 13:39:42 +0800 Subject: serial: imx: remove the uart_console() check The uart_console() check makes the clocks(clk_per and clk_ipg) opened even when we close the console uart. This patch enable/disable the clocks in imx_console_write(), so we can keep the clocks closed when the console uart is closed. Also remove the clock enable/disable oprations in the probe, we do not need them any more. Signed-off-by: Huang Shijie Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 69 ++++++++++++++++++++++++++++++------------------ 1 file changed, 43 insertions(+), 26 deletions(-) (limited to 'drivers/tty/serial/imx.c') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 40ca759d1f1..e43064b5c93 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -701,15 +701,13 @@ static int imx_startup(struct uart_port *port) int retval; unsigned long flags, temp; - if (!uart_console(port)) { - retval = clk_prepare_enable(sport->clk_per); - if (retval) - goto error_out1; - retval = clk_prepare_enable(sport->clk_ipg); - if (retval) { - clk_disable_unprepare(sport->clk_per); - goto error_out1; - } + retval = clk_prepare_enable(sport->clk_per); + if (retval) + goto error_out1; + retval = clk_prepare_enable(sport->clk_ipg); + if (retval) { + clk_disable_unprepare(sport->clk_per); + goto error_out1; } imx_setup_ufcr(sport, 0); @@ -900,10 +898,8 @@ static void imx_shutdown(struct uart_port *port) writel(temp, sport->port.membase + UCR1); spin_unlock_irqrestore(&sport->port.lock, flags); - if (!uart_console(&sport->port)) { - clk_disable_unprepare(sport->clk_per); - clk_disable_unprepare(sport->clk_ipg); - } + clk_disable_unprepare(sport->clk_per); + clk_disable_unprepare(sport->clk_ipg); } static void @@ -1250,6 +1246,16 @@ imx_console_write(struct console *co, const char *s, unsigned int count) unsigned int ucr1; unsigned long flags = 0; int locked = 1; + int retval; + + retval = clk_enable(sport->clk_per); + if (retval) + return; + retval = clk_enable(sport->clk_ipg); + if (retval) { + clk_disable(sport->clk_per); + return; + } if (sport->port.sysrq) locked = 0; @@ -1285,6 +1291,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count) if (locked) spin_unlock_irqrestore(&sport->port.lock, flags); + + clk_disable(sport->clk_ipg); + clk_disable(sport->clk_per); } /* @@ -1358,6 +1367,7 @@ imx_console_setup(struct console *co, char *options) int bits = 8; int parity = 'n'; int flow = 'n'; + int retval; /* * Check whether an invalid uart number has been specified, and @@ -1370,6 +1380,11 @@ imx_console_setup(struct console *co, char *options) if (sport == NULL) return -ENODEV; + /* For setting the registers, we only need to enable the ipg clock. */ + retval = clk_prepare_enable(sport->clk_ipg); + if (retval) + goto error_console; + if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else @@ -1377,7 +1392,20 @@ imx_console_setup(struct console *co, char *options) imx_setup_ufcr(sport, 0); - return uart_set_options(&sport->port, co, baud, parity, bits, flow); + retval = uart_set_options(&sport->port, co, baud, parity, bits, flow); + + clk_disable(sport->clk_ipg); + if (retval) { + clk_unprepare(sport->clk_ipg); + goto error_console; + } + + retval = clk_prepare(sport->clk_per); + if (retval) + clk_disable_unprepare(sport->clk_ipg); + +error_console: + return retval; } static struct uart_driver imx_reg; @@ -1555,9 +1583,6 @@ static int serial_imx_probe(struct platform_device *pdev) return ret; } - clk_prepare_enable(sport->clk_per); - clk_prepare_enable(sport->clk_ipg); - sport->port.uartclk = clk_get_rate(sport->clk_per); imx_ports[sport->port.line] = sport; @@ -1566,7 +1591,7 @@ static int serial_imx_probe(struct platform_device *pdev) if (pdata && pdata->init) { ret = pdata->init(pdev); if (ret) - goto clkput; + return ret; } ret = uart_add_one_port(&imx_reg, &sport->port); @@ -1574,18 +1599,10 @@ static int serial_imx_probe(struct platform_device *pdev) goto deinit; platform_set_drvdata(pdev, sport); - if (!uart_console(&sport->port)) { - clk_disable_unprepare(sport->clk_per); - clk_disable_unprepare(sport->clk_ipg); - } - return 0; deinit: if (pdata && pdata->exit) pdata->exit(pdev); -clkput: - clk_disable_unprepare(sport->clk_per); - clk_disable_unprepare(sport->clk_ipg); return ret; } -- cgit v1.2.3-18-g5258