From e8708ef7e86a463b3a5b01d4a9abf16c8748b464 Mon Sep 17 00:00:00 2001 From: Markus Pietrek Date: Tue, 2 Feb 2010 11:29:15 +0900 Subject: spi: spi_sh_msiof: Fixed data sampling on the correct edge The spi_sh_msiof.c driver presently misconfigures REDG and TEDG. TEDG==0 outputs data at the **rising edge** of the clock and REDG==0 samples data at the **falling edge** of the clock. Therefore for SPI, TEDG must be equal to REDG, otherwise the last byte received is not sampled in SPI mode 3. This brings the driver in line with the SH7723 HW Reference Manual settings documented in Figures 20.20 and 20.21 ("SPI Clock and data timing"). Signed-off-by: Markus Pietrek Acked-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/spi/spi_sh_msiof.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c index 51e5e1dfa6e..30973ec16a9 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi_sh_msiof.c @@ -173,15 +173,12 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, int edge; /* - * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG(!) - * 0 0 10 10 1 0 - * 0 1 10 10 0 1 - * 1 0 11 11 0 1 - * 1 1 11 11 1 0 - * - * (!) Note: REDG is inverted recommended data sheet setting + * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG + * 0 0 10 10 1 1 + * 0 1 10 10 0 0 + * 1 0 11 11 0 0 + * 1 1 11 11 1 1 */ - sh_msiof_write(p, FCTR, 0); sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24)); sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24)); @@ -193,7 +190,7 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, edge = cpol ? cpha : !cpha; tmp |= edge << 27; /* TEDG */ - tmp |= !edge << 26; /* REDG */ + tmp |= edge << 26; /* REDG */ tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */ sh_msiof_write(p, CTR, tmp); } -- cgit v1.2.3-18-g5258