From 8b60d6c25b2a2d3525d5322de856c3ca408e5783 Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Tue, 12 Oct 2010 18:18:32 +0800 Subject: spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/spi/Kconfig') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 0e6619426ea..9949c252c23 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -195,6 +195,15 @@ config SPI_FSL_SPI MPC83xx platform uses the controller in cpu mode or CPM/QE mode. MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. +config SPI_FSL_ESPI + tristate "Freescale eSPI controller" + depends on FSL_SOC + select SPI_FSL_LIB + help + This enables using the Freescale eSPI controllers in master mode. + From MPC8536, 85xx platform uses the controller, and all P10xx, + P20xx, P30xx,P40xx, P50xx uses this controller. + config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" depends on ARCH_OMAP1 -- cgit v1.2.3-18-g5258