From 8cd774ad30c22b9d89823f1f05d845f4cdaba9e8 Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Thu, 17 Jun 2010 11:13:40 +0800 Subject: serial: cpm_uart: implement the cpm_uart_early_write() function for console poll The cpm_uart_early_write() function which was used for console poll isn't implemented in the cpm uart driver. Implementing this function both fixes the build when CONFIG_CONSOLE_POLL is set and allows kgdboc to work via the cpm uart. Signed-off-by: Dongdong Deng Reviewed-by: Bruce Ashfield Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/serial/cpm_uart/cpm_uart_core.c | 143 ++++++++++++++++++-------------- 1 file changed, 79 insertions(+), 64 deletions(-) (limited to 'drivers/serial/cpm_uart') diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 9eb62a256e9..cd6cf575902 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct uart_port *port, int flags) } } +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) +/* + * Write a string to the serial port + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_early_write(struct uart_cpm_port *pinfo, + const char *string, u_int count) +{ + unsigned int i; + cbd_t __iomem *bdp, *bdbase; + unsigned char *cpm_outp_addr; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->tx_cur; + bdbase = pinfo->tx_bd_base; + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, string++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + /* Send the character out. + * If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = *string; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*string == 10) { + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = 13; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + pinfo->tx_cur = bdp; +} +#endif + #ifdef CONFIG_CONSOLE_POLL /* Serial polling routines for writing and reading from the uart while * in an interrupt or debug context. @@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uart_port *port, static char ch[2]; ch[0] = (char)c; - cpm_uart_early_write(pinfo->port.line, ch, 1); + cpm_uart_early_write(pinfo, ch, 1); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struct console *co, const char *s, u_int count) { struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; - unsigned int i; - cbd_t __iomem *bdp, *bdbase; - unsigned char *cp; unsigned long flags; int nolock = oops_in_progress; @@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, spin_lock_irqsave(&pinfo->port.lock, flags); } - /* Get the address of the host memory buffer. - */ - bdp = pinfo->tx_cur; - bdbase = pinfo->tx_bd_base; - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, s++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - /* Send the character out. - * If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - *cp = *s; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (*s == 10) { - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - *cp = 13; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - pinfo->tx_cur = bdp; + cpm_uart_early_write(pinfo, s, count); if (unlikely(nolock)) { local_irq_restore(flags); -- cgit v1.2.3-18-g5258