From e6bd0ebd4a8ba9118e970c0214e912e35895c92b Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Wed, 11 Jan 2012 02:44:16 -0800 Subject: [SCSI] qla4xxx: Disable generating pause frames in case of FW hung In case of FW hung ISP82xx generates continuous pause frames which causes switch to disable port. Added fix to disable generating pause frames in case of FW hung Signed-off-by: Giridhar Malavali Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_mbx.c | 7 +++++++ drivers/scsi/qla4xxx/ql4_nx.h | 3 +++ drivers/scsi/qla4xxx/ql4_os.c | 10 ++++++++++ 3 files changed, 20 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index c2593782fbb..e1e66a45e4d 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -219,6 +219,13 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, ha->mailbox_timeout_count++; mbx_sts[0] = (-1); set_bit(DPC_RESET_HA, &ha->dpc_flags); + if (is_qla8022(ha)) { + ql4_printk(KERN_INFO, ha, + "disabling pause transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); + } goto mbox_exit; } diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h index cfb2f2edac3..dc45ac92369 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.h +++ b/drivers/scsi/qla4xxx/ql4_nx.h @@ -39,6 +39,9 @@ enum { QLA82XX_TEMP_PANIC /* Fatal error, hardware has shut down. */ }; +#define CRB_NIU_XG_PAUSE_CTL_P0 0x1 +#define CRB_NIU_XG_PAUSE_CTL_P1 0x8 + #define QLA82XX_HW_H0_CH_HUB_ADR 0x05 #define QLA82XX_HW_H1_CH_HUB_ADR 0x0E #define QLA82XX_HW_H2_CH_HUB_ADR 0x03 diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 9d3eab51393..e2ef7762dc2 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -2080,6 +2080,11 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); if (qla4_8xxx_check_temp(ha)) { + ql4_printk(KERN_INFO, ha, "disabling pause" + " transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags); qla4xxx_wake_dpc(ha); } else if (dev_state == QLA82XX_DEV_NEED_RESET && @@ -2099,6 +2104,11 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) } else { /* Check firmware health */ if (qla4_8xxx_check_fw_alive(ha)) { + ql4_printk(KERN_INFO, ha, "disabling pause" + " transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); halt_status = qla4_8xxx_rd_32(ha, QLA82XX_PEG_HALT_STATUS1); -- cgit v1.2.3-18-g5258