From dcf2a4e0792e837d6133506444a033a95cbc9616 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 29 Sep 2010 11:18:53 -0400 Subject: [SCSI] lpfc 8.3.17: SLI Additions and Fixes - Added driver support for management application to pass down two security specific mailbox commands (MBX_SECURITY_MGMT and MBX_AUTH_PORT) - Added driver support for handling FIPS zeroization trap of host ERATT ER8, performing selective reset and bringing the device up. - Added code to detect INIT_LINK mailbox command completion returning status MBXERR_SEC_NO_PERMISSION. - Increased the wait timeout on host status register HS_FFRDY and HS_MBRDY being set. - Remove the port offline code from the Heartbeat TMO handler. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 10 ++++++++ drivers/scsi/lpfc/lpfc_hw.h | 6 ++++- drivers/scsi/lpfc/lpfc_init.c | 45 ++++++++++++++++++----------------- drivers/scsi/lpfc/lpfc_sli.c | 55 ++++++++++++++++++++++++++++++------------- 4 files changed, 78 insertions(+), 38 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index f6efc6fe86d..f681eea5773 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -586,6 +586,11 @@ lpfc_issue_lip(struct Scsi_Host *shost) phba->cfg_link_speed); mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + if ((mbxstatus == MBX_SUCCESS) && + (pmboxq->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION)) + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "2859 SLI authentication is required " + "for INIT_LINK but has not done yet\n"); } lpfc_set_loopback_flag(phba); @@ -3782,6 +3787,11 @@ sysfs_mbox_read(struct file *filp, struct kobject *kobj, case MBX_PORT_CAPABILITIES: case MBX_PORT_IOV_CONTROL: break; + case MBX_SECURITY_MGMT: + case MBX_AUTH_PORT: + if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) + return -EPERM; + break; case MBX_READ_SPARM64: case MBX_READ_LA: case MBX_READ_LA64: diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 1676f61291e..a631647051d 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1380,6 +1380,9 @@ typedef struct { /* FireFly BIU registers */ #define MBX_INIT_VFI 0xA3 #define MBX_INIT_VPI 0xA4 +#define MBX_AUTH_PORT 0xF8 +#define MBX_SECURITY_MGMT 0xF9 + /* IOCB Commands */ #define CMD_RCV_SEQUENCE_CX 0x01 @@ -1502,7 +1505,8 @@ typedef struct { /* FireFly BIU registers */ #define MBXERR_DMA_ERROR 15 #define MBXERR_ERROR 16 #define MBXERR_LINK_DOWN 0x33 -#define MBX_NOT_FINISHED 255 +#define MBXERR_SEC_NO_PERMISSION 0xF02 +#define MBX_NOT_FINISHED 255 #define MBX_BUSY 0xffffff /* Attempted cmd to busy Mailbox */ #define MBX_TIMEOUT 0xfffffe /* time-out expired waiting for */ diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 699c9cf2dad..053eaef0900 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1076,21 +1076,16 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } else { /* * If heart beat timeout called with hb_outstanding set - * we need to take the HBA offline. + * we need to give the hb mailbox cmd a chance to + * complete or TMO. */ - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0459 Adapter heartbeat failure, " - "taking this port offline.\n"); - - spin_lock_irq(&phba->hbalock); - psli->sli_flag &= ~LPFC_SLI_ACTIVE; - spin_unlock_irq(&phba->hbalock); - - lpfc_offline_prep(phba); - lpfc_offline(phba); - lpfc_unblock_mgmt_io(phba); - phba->link_state = LPFC_HBA_ERROR; - lpfc_hba_down_post(phba); + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "0459 Adapter heartbeat still out" + "standing:last compl time was %d ms.\n", + jiffies_to_msecs(jiffies + - phba->last_completion_time)); + mod_timer(&phba->hb_tmofunc, + jiffies + HZ * LPFC_HB_MBOX_TIMEOUT); } } } @@ -1277,13 +1272,21 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba) if (phba->hba_flag & DEFER_ERATT) lpfc_handle_deferred_eratt(phba); - if (phba->work_hs & HS_FFER6) { - /* Re-establishing Link */ - lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, - "1301 Re-establishing Link " - "Data: x%x x%x x%x\n", - phba->work_hs, - phba->work_status[0], phba->work_status[1]); + if ((phba->work_hs & HS_FFER6) || (phba->work_hs & HS_FFER8)) { + if (phba->work_hs & HS_FFER6) + /* Re-establishing Link */ + lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, + "1301 Re-establishing Link " + "Data: x%x x%x x%x\n", + phba->work_hs, phba->work_status[0], + phba->work_status[1]); + if (phba->work_hs & HS_FFER8) + /* Device Zeroization */ + lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, + "2861 Host Authentication device " + "zeroization Data:x%x x%x x%x\n", + phba->work_hs, phba->work_status[0], + phba->work_status[1]); spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI_ACTIVE; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index bbbd8ba5c1a..34dd87f542c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1677,6 +1677,8 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_RESUME_RPI: case MBX_READ_EVENT_LOG_STATUS: case MBX_READ_EVENT_LOG: + case MBX_SECURITY_MGMT: + case MBX_AUTH_PORT: ret = mbxCommand; break; default: @@ -1781,6 +1783,13 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) pmb->context2 = NULL; } + /* Check security permission status on INIT_LINK mailbox command */ + if ((pmb->u.mb.mbxCommand == MBX_INIT_LINK) && + (pmb->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION)) + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "2860 SLI authentication is required " + "for INIT_LINK but has not done yet\n"); + if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG) lpfc_sli4_mbox_cmd_free(phba, pmb); else @@ -3658,11 +3667,15 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) i = 0; while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) { - /* Check every 100ms for 5 retries, then every 500ms for 5, then - * every 2.5 sec for 5, then reset board and every 2.5 sec for - * 4. + /* Check every 10ms for 10 retries, then every 100ms for 90 + * retries, then every 1 sec for 50 retires for a total of + * ~60 seconds before reset the board again and check every + * 1 sec for 50 retries. The up to 60 seconds before the + * board ready is required by the Falcon FIPS zeroization + * complete, and any reset the board in between shall cause + * restart of zeroization, further delay the board ready. */ - if (i++ >= 20) { + if (i++ >= 200) { /* Adapter failed to init, timeout, status reg */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -3690,16 +3703,15 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) return -EIO; } - if (i <= 5) { + if (i <= 10) msleep(10); - } else if (i <= 10) { - msleep(500); - } else { - msleep(2500); - } + else if (i <= 100) + msleep(100); + else + msleep(1000); - if (i == 15) { - /* Do post */ + if (i == 150) { + /* Do post */ phba->pport->port_state = LPFC_VPORT_UNKNOWN; lpfc_sli_brdrestart(phba); } @@ -5950,6 +5962,8 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, uint8_t command_type = ELS_COMMAND_NON_FIP; uint8_t cmnd; uint16_t xritag; + uint16_t abrt_iotag; + struct lpfc_iocbq *abrtiocbq; struct ulp_bde64 *bpl = NULL; uint32_t els_id = ELS_ID_DEFAULT; int numBdes, i; @@ -6162,9 +6176,17 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, case CMD_ABORT_XRI_CX: /* words 0-2 memcpy should be 0 rserved */ /* port will send abts */ - if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN) + abrt_iotag = iocbq->iocb.un.acxri.abortContextTag; + if (abrt_iotag != 0 && abrt_iotag <= phba->sli.last_iotag) { + abrtiocbq = phba->sli.iocbq_lookup[abrt_iotag]; + fip = abrtiocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK; + } else + fip = 0; + + if ((iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN) || fip) /* - * The link is down so the fw does not need to send abts + * The link is down, or the command was ELS_FIP + * so the fw does not need to send abts * on the wire. */ bf_set(abort_cmd_ia, &wqe->abort_cmd, 1); @@ -7895,7 +7917,7 @@ lpfc_sli_eratt_read(struct lpfc_hba *phba) /* Check if there is a deferred error condition is active */ if ((HS_FFER1 & phba->work_hs) && ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | - HS_FFER6 | HS_FFER7) & phba->work_hs)) { + HS_FFER6 | HS_FFER7 | HS_FFER8) & phba->work_hs)) { phba->hba_flag |= DEFER_ERATT; /* Clear all interrupt enable conditions */ writel(0, phba->HCregaddr); @@ -8211,7 +8233,8 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id) */ if ((HS_FFER1 & phba->work_hs) && ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | - HS_FFER6 | HS_FFER7) & phba->work_hs)) { + HS_FFER6 | HS_FFER7 | HS_FFER8) & + phba->work_hs)) { phba->hba_flag |= DEFER_ERATT; /* Clear all interrupt enable conditions */ writel(0, phba->HCregaddr); -- cgit v1.2.3-18-g5258