From 97fedbbe1046b3118f49df249840ca21041eefe4 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 16 Mar 2010 08:55:32 +0100
Subject: Remove GENHD_FL_DRIVERFS

This flag is not used, so best discarded.

Signed-off-by: NeilBrown <neilb@suse.de>
--
Hi Jens,
 I came across this recently - these are the only two occurances
 of "GENHD_FL_DRIVERFS" in the kernel, so it cannot be needed.
NeilBrown
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/scsi/sd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1dd4d840769..466fae8ef77 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2185,7 +2185,7 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
 	blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
 
 	gd->driverfs_dev = &sdp->sdev_gendev;
-	gd->flags = GENHD_FL_EXT_DEVT | GENHD_FL_DRIVERFS;
+	gd->flags = GENHD_FL_EXT_DEVT;
 	if (sdp->removable)
 		gd->flags |= GENHD_FL_REMOVABLE;
 
-- 
cgit v1.2.3-18-g5258


From 4ae0a6c15efcc37e94e3f30e3533bdec03c53126 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Tue, 9 Mar 2010 14:14:51 -0600
Subject: [SCSI] libiscsi: Fix recovery slowdown regression

We could be failing/stopping a connection due to libiscsi starting
recovery/cleanup, but the xmit path or scsi eh thread path
could be dropping the connection at the same time.

As a result the session->state gets set to failed instead of in
recovery. We end up not blocking the session
and so the replacement timeout never gets started and we only end up
failing the IO when scsi_softirq_done sees that the
cmd has been running for (cmd->allowed + 1) * rq->timeout secs.

We used to fail the IO right away so users are seeing a long
delay when using dm-multipath. This problem was added in
2.6.28.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/libiscsi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 685eaec5321..7688b8f83e9 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -3087,14 +3087,15 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 		session->state = ISCSI_STATE_TERMINATE;
 	else if (conn->stop_stage != STOP_CONN_RECOVER)
 		session->state = ISCSI_STATE_IN_RECOVERY;
+
+	old_stop_stage = conn->stop_stage;
+	conn->stop_stage = flag;
 	spin_unlock_bh(&session->lock);
 
 	del_timer_sync(&conn->transport_timer);
 	iscsi_suspend_tx(conn);
 
 	spin_lock_bh(&session->lock);
-	old_stop_stage = conn->stop_stage;
-	conn->stop_stage = flag;
 	conn->c_stage = ISCSI_CONN_STOPPED;
 	spin_unlock_bh(&session->lock);
 
-- 
cgit v1.2.3-18-g5258


From d88a714bfefa7aed7b9cb6c3721707fcd056b472 Mon Sep 17 00:00:00 2001
From: Sarang Radke <sarang.radke@qlogic.com>
Date: Wed, 10 Mar 2010 04:03:04 -0600
Subject: [SCSI] scsi_transport_fc: Make sure commands are completed when rport
 is offline

blk_end_request doesn't complete a bidi request
successfully

The unfinished request eventually triggers a panic in
timeout handling routine fc_bsg_job_timeout as
req->special is NULL

Use blk_end_request_all to end the request unconditionally

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Acked-by: James Smart  <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/scsi_transport_fc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 1d5b72173dd..e37aeeb407f 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3852,7 +3852,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost,
 		if (rport && (rport->port_state != FC_PORTSTATE_ONLINE)) {
 			req->errors = -ENXIO;
 			spin_unlock_irq(q->queue_lock);
-			blk_end_request(req, -ENXIO, blk_rq_bytes(req));
+			blk_end_request_all(req, -ENXIO);
 			spin_lock_irq(q->queue_lock);
 			continue;
 		}
@@ -3862,7 +3862,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost,
 		ret = fc_req_to_bsgjob(shost, rport, req);
 		if (ret) {
 			req->errors = ret;
-			blk_end_request(req, ret, blk_rq_bytes(req));
+			blk_end_request_all(req, ret);
 			spin_lock_irq(q->queue_lock);
 			continue;
 		}
-- 
cgit v1.2.3-18-g5258


From cad454b12a23c24fd7f409402cf51434655e76c1 Mon Sep 17 00:00:00 2001
From: Santosh Vernekar <santosh.vernekar@qlogic.com>
Date: Fri, 19 Mar 2010 16:59:16 -0700
Subject: [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs.

We now enable/disable "Additional Receive Credits" in f/w based on nvram
parameter "Extended_BB_Credits" bit (i.e. Enhanced-Features: at offset 0x196).
This is applicable only for GEN2 CNAs.

Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_fw.h  | 18 +++++++++++++++---
 drivers/scsi/qla2xxx/qla_mbx.c |  8 +++++++-
 2 files changed, 22 insertions(+), 4 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index cebf4f1bb7d..42c5587cc50 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1592,10 +1592,22 @@ struct nvram_81xx {
 
 	/* Offset 384. */
 	uint8_t reserved_21[16];
-	uint16_t reserved_22[8];
+	uint16_t reserved_22[3];
+
+	/*
+	 * BIT 0 = Extended BB credits for LR
+	 * BIT 1 = Virtual Fabric Enable
+	 * BIT 2 = Enhanced Features Unused
+	 * BIT 3-7 = Enhanced Features Reserved
+	 */
+	/* Enhanced Features */
+	uint8_t enhanced_features;
+
+	uint8_t reserved_23;
+	uint16_t reserved_24[4];
 
 	/* Offset 416. */
-	uint16_t reserved_23[32];
+	uint16_t reserved_25[32];
 
 	/* Offset 480. */
 	uint8_t model_name[16];
@@ -1603,7 +1615,7 @@ struct nvram_81xx {
 	/* Offset 496. */
 	uint16_t feature_mask_l;
 	uint16_t feature_mask_h;
-	uint16_t reserved_24[2];
+	uint16_t reserved_26[2];
 
 	uint16_t subsystem_vendor_id;
 	uint16_t subsystem_device_id;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 6e53bdbb1da..3ba9a2b5655 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -339,6 +339,7 @@ qla2x00_load_ram(scsi_qla_host_t *vha, dma_addr_t req_dma, uint32_t risc_addr,
 	return rval;
 }
 
+#define	EXTENDED_BB_CREDITS	BIT_0
 /*
  * qla2x00_execute_fw
  *     Start adapter firmware.
@@ -371,7 +372,12 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 		mcp->mb[1] = MSW(risc_addr);
 		mcp->mb[2] = LSW(risc_addr);
 		mcp->mb[3] = 0;
-		mcp->mb[4] = 0;
+		if (IS_QLA81XX(ha)) {
+			struct nvram_81xx *nv = ha->nvram;
+			mcp->mb[4] = (nv->enhanced_features &
+			    EXTENDED_BB_CREDITS);
+		} else
+			mcp->mb[4] = 0;
 		mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
 		mcp->in_mb |= MBX_1;
 	} else {
-- 
cgit v1.2.3-18-g5258


From 12cec63e40f9b9c2a4766a0f43404a9642062f35 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Fri, 19 Mar 2010 16:59:17 -0700
Subject: [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE
 processing.

Checks should only be done for NPIV-capable ISPs.  Original code
could result in PORT_UPDATEs being missed on non-NPIV-capable
ISPs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_isr.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ab90329ff2e..295337d1fcb 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -620,11 +620,10 @@ skip_rio:
 		 *           vp_idx does not match
 		 *       Event is not global, vp_idx does not match
 		 */
-		if ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff)
-			|| (mb[1] != 0xffff)) {
-			if (vha->vp_idx != (mb[3] & 0xff))
-				break;
-		}
+		if (IS_QLA2XXX_MIDTYPE(ha) &&
+		    ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff) ||
+			(mb[1] != 0xffff)) && vha->vp_idx != (mb[3] & 0xff))
+			break;
 
 		/* Global event -- port logout or port unavailable. */
 		if (mb[1] == 0xffff && mb[2] == 0x7) {
-- 
cgit v1.2.3-18-g5258


From d84a47c2e8d8880d068f23f3033f6f6987717b17 Mon Sep 17 00:00:00 2001
From: Michael Hernandez <michael.hernandez@qlogic.com>
Date: Fri, 19 Mar 2010 16:59:18 -0700
Subject: [SCSI] qla2xxx: Check to make sure multique and CPU affinity support
 is not enabled at the same time.

The logic is changed to detect this condition based on following
1) both module parameters are off (ql2xmaxqueues and ql2xmultique_tag).
2) both module parameters are on (ql2xmaxqueues and ql2xmultique_tag).
3) The HBA does not support multi queue.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_os.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 46720b23028..be3f1d3a9c1 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1676,9 +1676,11 @@ skip_pio:
 
 	/* Determine queue resources */
 	ha->max_req_queues = ha->max_rsp_queues = 1;
-	if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
+	if ((ql2xmaxqueues <= 1 && !ql2xmultique_tag) ||
+		(ql2xmaxqueues > 1 && ql2xmultique_tag) ||
 		(!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
 		goto mqiobase_exit;
+
 	ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
 			pci_resource_len(ha->pdev, 3));
 	if (ha->mqiobase) {
-- 
cgit v1.2.3-18-g5258


From 6377a7ae1ab82859edccdbc8eaea63782efb134d Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Fri, 19 Mar 2010 16:59:19 -0700
Subject: [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432.

On specific platforms, MSI is unreliable on some of the QLA24xx chips, resulting
in fatal I/O errors under load, as reported in <http://bugs.debian.org/572322>
and by some RHEL customers.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_isr.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 295337d1fcb..44df0b752ad 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2271,30 +2271,28 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
 
 	/* If possible, enable MSI-X. */
 	if (!IS_QLA2432(ha) && !IS_QLA2532(ha) &&
-	    !IS_QLA8432(ha) && !IS_QLA8001(ha))
-		goto skip_msix;
+		!IS_QLA8432(ha) && !IS_QLA8001(ha))
+		goto skip_msi;
+
+	if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
+		(ha->pdev->subsystem_device == 0x7040 ||
+		ha->pdev->subsystem_device == 0x7041 ||
+		ha->pdev->subsystem_device == 0x1705)) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+			"MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X,0x%X).\n",
+			ha->pdev->subsystem_vendor,
+			ha->pdev->subsystem_device));
+		goto skip_msi;
+	}
 
 	if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
 		!QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
 		DEBUG2(qla_printk(KERN_WARNING, ha,
 		"MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n",
 			ha->pdev->revision, ha->fw_attributes));
-
 		goto skip_msix;
 	}
 
-	if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
-	    (ha->pdev->subsystem_device == 0x7040 ||
-		ha->pdev->subsystem_device == 0x7041 ||
-		ha->pdev->subsystem_device == 0x1705)) {
-		DEBUG2(qla_printk(KERN_WARNING, ha,
-		    "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n",
-		    ha->pdev->subsystem_vendor,
-		    ha->pdev->subsystem_device));
-
-		goto skip_msi;
-	}
-
 	ret = qla24xx_enable_msix(ha, rsp);
 	if (!ret) {
 		DEBUG2(qla_printk(KERN_INFO, ha,
-- 
cgit v1.2.3-18-g5258


From d6136f3f749cf68c3295c883cea612afd9919100 Mon Sep 17 00:00:00 2001
From: Santosh Vernekar <santosh.vernekar@qlogic.com>
Date: Fri, 19 Mar 2010 16:59:20 -0700
Subject: [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp
 reset.

The fix prevents application path from sending get-firmware-state mbx command
during as isp reset.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_attr.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 90d1e062ec4..35a325266af 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1274,7 +1274,11 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
 	int rval = QLA_FUNCTION_FAILED;
 	uint16_t state[5];
 
-	if (!vha->hw->flags.eeh_busy)
+	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
+		test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+		DEBUG2_3_11(printk("%s(%ld): isp reset in progress.\n",
+			__func__, vha->host_no));
+	else if (!vha->hw->flags.eeh_busy)
 		rval = qla2x00_get_firmware_state(vha, state);
 	if (rval != QLA_SUCCESS)
 		memset(state, -1, sizeof(state));
-- 
cgit v1.2.3-18-g5258


From 89162e9c21de3cb3b7e9e29d50cb7c3e88a09e2b Mon Sep 17 00:00:00 2001
From: Giridhar Malavali <giridhar.malavali@qlogic.com>
Date: Fri, 19 Mar 2010 16:59:21 -0700
Subject: [SCSI] qla2xxx: Updated version number to 8.03.02-k2.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_version.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 8d2fc2fa7a6..109068df933 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.02-k1"
+#define QLA2XXX_VERSION      "8.03.02-k2"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
 #define QLA_DRIVER_PATCH_VER	2
-#define QLA_DRIVER_BETA_VER	1
+#define QLA_DRIVER_BETA_VER	2
-- 
cgit v1.2.3-18-g5258


From cf7474451c3a3cf07811abbf2a39536d33046c36 Mon Sep 17 00:00:00 2001
From: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Date: Fri, 19 Mar 2010 19:37:26 -0300
Subject: [SCSI] advansys: fix regression with request_firmware change

On newer kernels users of advansys module are reporting system hang when
trying to load it without firmware files present. After looking closely
at description on https://qa.mandriva.com/show_bug.cgi?id=53220, I think
this is related to commit "[SCSI] advansys: use request_firmware". The
problem is that after switch to request_firmware, asc_dvc->err_code
isn't being set when firmware files aren't found or loading fails.

err_code is used by the driver to judge if there was a fatal error or
not, as can be seen for example on advansys_board_found, which will only
return -ENODEV when err_code is set. Because err_code isn't being set
when request_firmware fails, this is a change of behaviour of the code
before request_firmware addition, making it continue to load and it
fails later as the firmware wasn't really loaded.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/advansys.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 22626abdb63..9201afe6560 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4781,12 +4781,14 @@ static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
 	if (err) {
 		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
 		       fwname, err);
+		asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
 		return err;
 	}
 	if (fw->size < 4) {
 		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
 		       fw->size, fwname);
 		release_firmware(fw);
+		asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
 		return -EINVAL;
 	}
 	chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@@ -5110,12 +5112,14 @@ static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)
 	if (err) {
 		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
 		       fwname, err);
+		asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
 		return err;
 	}
 	if (fw->size < 4) {
 		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
 		       fw->size, fwname);
 		release_firmware(fw);
+		asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
 		return -EINVAL;
 	}
 	chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@@ -5624,12 +5628,14 @@ static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc)
 	if (err) {
 		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
 		       fwname, err);
+		asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
 		return err;
 	}
 	if (fw->size < 4) {
 		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
 		       fw->size, fwname);
 		release_firmware(fw);
+		asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
 		return -EINVAL;
 	}
 	chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@@ -6124,12 +6130,14 @@ static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc)
 	if (err) {
 		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
 		       fwname, err);
+		asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
 		return err;
 	}
 	if (fw->size < 4) {
 		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
 		       fw->size, fwname);
 		release_firmware(fw);
+		asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
 		return -EINVAL;
 	}
 	chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
-- 
cgit v1.2.3-18-g5258


From 421e33d0045ac0aa119c033b78742e0fbf4c3b21 Mon Sep 17 00:00:00 2001
From: Michael Reed <mdr@sgi.com>
Date: Tue, 23 Mar 2010 15:00:58 -0500
Subject: [SCSI] qla1280: retain firmware for error recovery

The qla1280 driver acquires its firmware via udev.  During boot the firmware
is located in the initrd.  If, after root is mounted, the adapter needs to
reload firmware (host reset), the firmware load may fail if the root device
is on the adapter being reset.  This patch modifies qla1280 to retain the
firmware loaded via the initial request_firmware() for use during error
recovery.

[jejb: fix up checkpatch issues]
Signed-off-by: Michael Reed <mdr@sgi.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla1280.c | 161 +++++++++++++++++++++++++++++++++----------------
 1 file changed, 109 insertions(+), 52 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 49ac4148493..66e2dd43008 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,11 @@
 * General Public License for more details.
 *
 ******************************************************************************/
-#define QLA1280_VERSION      "3.27"
+#define QLA1280_VERSION      "3.27.1"
 /*****************************************************************************
     Revision History:
+    Rev  3.27.1, February 8, 2010, Michael Reed
+	- Retain firmware image for error recovery.
     Rev  3.27, February 10, 2009, Michael Reed
 	- General code cleanup.
 	- Improve error recovery.
@@ -538,9 +540,9 @@ __setup("qla1280=", qla1280_setup);
 /*****************************************/
 
 struct qla_boards {
-	unsigned char name[9];	/* Board ID String */
+	char *name;		/* Board ID String */
 	int numPorts;		/* Number of SCSI ports */
-	char *fwname;		/* firmware name        */
+	int fw_index;		/* index into qla1280_fw_tbl for firmware */
 };
 
 /* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
@@ -561,15 +563,30 @@ static struct pci_device_id qla1280_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
 
+DEFINE_MUTEX(qla1280_firmware_mutex);
+
+struct qla_fw {
+	char *fwname;
+	const struct firmware *fw;
+};
+
+#define QL_NUM_FW_IMAGES 3
+
+struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
+	{"qlogic/1040.bin",  NULL},	/* image 0 */
+	{"qlogic/1280.bin",  NULL},	/* image 1 */
+	{"qlogic/12160.bin", NULL},	/* image 2 */
+};
+
+/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */
 static struct qla_boards ql1280_board_tbl[] = {
-	/* Name ,  Number of ports, FW details */
-	{"QLA12160",	2, "qlogic/12160.bin"},
-	{"QLA1040",	1, "qlogic/1040.bin"},
-	{"QLA1080",	1, "qlogic/1280.bin"},
-	{"QLA1240",	2, "qlogic/1280.bin"},
-	{"QLA1280",	2, "qlogic/1280.bin"},
-	{"QLA10160",	1, "qlogic/12160.bin"},
-	{"        ",	0, "   "},
+	{.name = "QLA12160", .numPorts = 2, .fw_index = 2},
+	{.name = "QLA1040" , .numPorts = 1, .fw_index = 0},
+	{.name = "QLA1080" , .numPorts = 1, .fw_index = 1},
+	{.name = "QLA1240" , .numPorts = 2, .fw_index = 1},
+	{.name = "QLA1280" , .numPorts = 2, .fw_index = 1},
+	{.name = "QLA10160", .numPorts = 1, .fw_index = 2},
+	{.name = "        ", .numPorts = 0, .fw_index = -1},
 };
 
 static int qla1280_verbose = 1;
@@ -1511,6 +1528,63 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha)
 	return status;
 }
 
+/*
+ * qla1280_request_firmware
+ *      Acquire firmware for chip.  Retain in memory
+ *      for error recovery.
+ *
+ * Input:
+ *      ha = adapter block pointer.
+ *
+ * Returns:
+ *      Pointer to firmware image or an error code
+ *      cast to pointer via ERR_PTR().
+ */
+static const struct firmware *
+qla1280_request_firmware(struct scsi_qla_host *ha)
+{
+	const struct firmware *fw;
+	int err;
+	int index;
+	char *fwname;
+
+	spin_unlock_irq(ha->host->host_lock);
+	mutex_lock(&qla1280_firmware_mutex);
+
+	index = ql1280_board_tbl[ha->devnum].fw_index;
+	fw = qla1280_fw_tbl[index].fw;
+	if (fw)
+		goto out;
+
+	fwname = qla1280_fw_tbl[index].fwname;
+	err = request_firmware(&fw, fwname, &ha->pdev->dev);
+
+	if (err) {
+		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+		       fwname, err);
+		fw = ERR_PTR(err);
+		goto unlock;
+	}
+	if ((fw->size % 2) || (fw->size < 6)) {
+		printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n",
+		       fw->size, fwname);
+		release_firmware(fw);
+		fw = ERR_PTR(-EINVAL);
+		goto unlock;
+	}
+
+	qla1280_fw_tbl[index].fw = fw;
+
+ out:
+	ha->fwver1 = fw->data[0];
+	ha->fwver2 = fw->data[1];
+	ha->fwver3 = fw->data[2];
+ unlock:
+	mutex_unlock(&qla1280_firmware_mutex);
+	spin_lock_irq(ha->host->host_lock);
+	return fw;
+}
+
 /*
  * Chip diagnostics
  *      Test chip for proper operation.
@@ -1634,30 +1708,18 @@ qla1280_chip_diag(struct scsi_qla_host *ha)
 static int
 qla1280_load_firmware_pio(struct scsi_qla_host *ha)
 {
+	/* enter with host_lock acquired */
+
 	const struct firmware *fw;
 	const __le16 *fw_data;
 	uint16_t risc_address, risc_code_size;
 	uint16_t mb[MAILBOX_REGISTER_COUNT], i;
-	int err;
+	int err = 0;
+
+	fw = qla1280_request_firmware(ha);
+	if (IS_ERR(fw))
+		return PTR_ERR(fw);
 
-	spin_unlock_irq(ha->host->host_lock);
-	err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
-			       &ha->pdev->dev);
-	spin_lock_irq(ha->host->host_lock);
-	if (err) {
-		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
-		       ql1280_board_tbl[ha->devnum].fwname, err);
-		return err;
-	}
-	if ((fw->size % 2) || (fw->size < 6)) {
-		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
-		       fw->size, ql1280_board_tbl[ha->devnum].fwname);
-		err = -EINVAL;
-		goto out;
-	}
-	ha->fwver1 = fw->data[0];
-	ha->fwver2 = fw->data[1];
-	ha->fwver3 = fw->data[2];
 	fw_data = (const __le16 *)&fw->data[0];
 	ha->fwstart = __le16_to_cpu(fw_data[2]);
 
@@ -1675,11 +1737,10 @@ qla1280_load_firmware_pio(struct scsi_qla_host *ha)
 		if (err) {
 			printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
 					ha->host_no);
-			goto out;
+			break;
 		}
 	}
-out:
-	release_firmware(fw);
+
 	return err;
 }
 
@@ -1687,6 +1748,7 @@ out:
 static int
 qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 {
+	/* enter with host_lock acquired */
 	const struct firmware *fw;
 	const __le16 *fw_data;
 	uint16_t risc_address, risc_code_size;
@@ -1701,24 +1763,10 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 		return -ENOMEM;
 #endif
 
-	spin_unlock_irq(ha->host->host_lock);
-	err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
-			       &ha->pdev->dev);
-	spin_lock_irq(ha->host->host_lock);
-	if (err) {
-		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
-		       ql1280_board_tbl[ha->devnum].fwname, err);
-		return err;
-	}
-	if ((fw->size % 2) || (fw->size < 6)) {
-		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
-		       fw->size, ql1280_board_tbl[ha->devnum].fwname);
-		err = -EINVAL;
-		goto out;
-	}
-	ha->fwver1 = fw->data[0];
-	ha->fwver2 = fw->data[1];
-	ha->fwver3 = fw->data[2];
+	fw = qla1280_request_firmware(ha);
+	if (IS_ERR(fw))
+		return PTR_ERR(fw);
+
 	fw_data = (const __le16 *)&fw->data[0];
 	ha->fwstart = __le16_to_cpu(fw_data[2]);
 
@@ -1803,7 +1851,6 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 #if DUMP_IT_BACK
 	pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
 #endif
-	release_firmware(fw);
 	return err;
 }
 
@@ -1842,6 +1889,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
 static int
 qla1280_load_firmware(struct scsi_qla_host *ha)
 {
+	/* enter with host_lock taken */
 	int err;
 
 	err = qla1280_chip_diag(ha);
@@ -4420,7 +4468,16 @@ qla1280_init(void)
 static void __exit
 qla1280_exit(void)
 {
+	int i;
+
 	pci_unregister_driver(&qla1280_pci_driver);
+	/* release any allocated firmware images */
+	for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
+		if (qla1280_fw_tbl[i].fw) {
+			release_firmware(qla1280_fw_tbl[i].fw);
+			qla1280_fw_tbl[i].fw = NULL;
+		}
+	}
 }
 
 module_init(qla1280_init);
-- 
cgit v1.2.3-18-g5258


From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Mar 2010 17:04:11 +0900
Subject: include cleanup: Update gfp.h and slab.h includes to prepare for
 breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
---
 drivers/scsi/3w-9xxx.c                      | 1 +
 drivers/scsi/3w-sas.c                       | 1 +
 drivers/scsi/3w-xxxx.c                      | 1 +
 drivers/scsi/53c700.c                       | 1 +
 drivers/scsi/BusLogic.c                     | 1 +
 drivers/scsi/NCR_D700.c                     | 1 +
 drivers/scsi/NCR_Q720.c                     | 1 +
 drivers/scsi/a100u2w.c                      | 1 -
 drivers/scsi/a2091.c                        | 1 +
 drivers/scsi/a3000.c                        | 1 +
 drivers/scsi/a4000t.c                       | 1 +
 drivers/scsi/aacraid/rx.c                   | 1 -
 drivers/scsi/aacraid/sa.c                   | 1 -
 drivers/scsi/aha152x.c                      | 1 +
 drivers/scsi/aha1542.c                      | 1 +
 drivers/scsi/aha1740.c                      | 1 +
 drivers/scsi/aic7xxx/aic79xx_osm.c          | 1 +
 drivers/scsi/aic7xxx/aic7xxx_osm.c          | 1 +
 drivers/scsi/aic94xx/aic94xx_hwi.c          | 1 +
 drivers/scsi/aic94xx/aic94xx_init.c         | 1 +
 drivers/scsi/aic94xx/aic94xx_scb.c          | 1 +
 drivers/scsi/aic94xx/aic94xx_sds.c          | 1 +
 drivers/scsi/aic94xx/aic94xx_seq.c          | 1 +
 drivers/scsi/aic94xx/aic94xx_tmf.c          | 1 +
 drivers/scsi/arcmsr/arcmsr_hba.c            | 1 +
 drivers/scsi/atari_NCR5380.c                | 1 +
 drivers/scsi/atp870u.c                      | 1 +
 drivers/scsi/be2iscsi/be_main.c             | 1 +
 drivers/scsi/bfa/bfad.c                     | 1 +
 drivers/scsi/bfa/bfad_attr.c                | 1 +
 drivers/scsi/bfa/bfad_im.c                  | 1 +
 drivers/scsi/bfa/rport.c                    | 1 +
 drivers/scsi/bnx2i/bnx2i_hwi.c              | 1 +
 drivers/scsi/bnx2i/bnx2i_iscsi.c            | 1 +
 drivers/scsi/bvme6000_scsi.c                | 1 +
 drivers/scsi/ch.c                           | 1 +
 drivers/scsi/cxgb3i/cxgb3i_ddp.c            | 1 +
 drivers/scsi/cxgb3i/cxgb3i_ddp.h            | 1 +
 drivers/scsi/cxgb3i/cxgb3i_iscsi.c          | 1 +
 drivers/scsi/cxgb3i/cxgb3i_offload.c        | 1 +
 drivers/scsi/cxgb3i/cxgb3i_pdu.c            | 1 +
 drivers/scsi/dc395x.c                       | 1 +
 drivers/scsi/device_handler/scsi_dh.c       | 1 +
 drivers/scsi/device_handler/scsi_dh_alua.c  | 1 +
 drivers/scsi/device_handler/scsi_dh_emc.c   | 1 +
 drivers/scsi/device_handler/scsi_dh_hp_sw.c | 1 +
 drivers/scsi/device_handler/scsi_dh_rdac.c  | 1 +
 drivers/scsi/eata.c                         | 1 +
 drivers/scsi/eata_pio.c                     | 1 -
 drivers/scsi/fcoe/fcoe.c                    | 1 +
 drivers/scsi/fcoe/libfcoe.c                 | 1 +
 drivers/scsi/fd_mcs.c                       | 1 +
 drivers/scsi/fdomain.c                      | 1 +
 drivers/scsi/fnic/fnic_fcs.c                | 1 +
 drivers/scsi/fnic/fnic_main.c               | 1 +
 drivers/scsi/fnic/fnic_scsi.c               | 1 +
 drivers/scsi/fnic/vnic_dev.c                | 1 +
 drivers/scsi/fnic/vnic_rq.c                 | 1 +
 drivers/scsi/fnic/vnic_wq.c                 | 1 +
 drivers/scsi/gdth.c                         | 1 +
 drivers/scsi/gdth_proc.c                    | 1 +
 drivers/scsi/gvp11.c                        | 1 +
 drivers/scsi/hosts.c                        | 1 +
 drivers/scsi/hptiop.c                       | 1 +
 drivers/scsi/ibmvscsi/ibmvfc.c              | 1 +
 drivers/scsi/ibmvscsi/ibmvscsi.c            | 1 +
 drivers/scsi/ibmvscsi/ibmvstgt.c            | 1 +
 drivers/scsi/ibmvscsi/rpa_vscsi.c           | 1 +
 drivers/scsi/imm.c                          | 1 +
 drivers/scsi/ipr.c                          | 1 +
 drivers/scsi/iscsi_tcp.c                    | 1 +
 drivers/scsi/jazz_esp.c                     | 1 +
 drivers/scsi/lasi700.c                      | 1 +
 drivers/scsi/libfc/fc_disc.c                | 1 +
 drivers/scsi/libfc/fc_exch.c                | 2 +-
 drivers/scsi/libfc/fc_fcp.c                 | 1 +
 drivers/scsi/libfc/fc_frame.c               | 1 +
 drivers/scsi/libfc/fc_lport.c               | 1 +
 drivers/scsi/libfc/fc_rport.c               | 1 +
 drivers/scsi/libiscsi.c                     | 1 +
 drivers/scsi/libiscsi_tcp.c                 | 1 +
 drivers/scsi/libsas/sas_ata.c               | 1 +
 drivers/scsi/libsas/sas_discover.c          | 1 +
 drivers/scsi/libsas/sas_expander.c          | 1 +
 drivers/scsi/libsas/sas_host_smp.c          | 1 +
 drivers/scsi/libsas/sas_init.c              | 1 +
 drivers/scsi/libsas/sas_scsi_host.c         | 1 +
 drivers/scsi/libsrp.c                       | 1 +
 drivers/scsi/lpfc/lpfc_attr.c               | 1 +
 drivers/scsi/lpfc/lpfc_bsg.c                | 1 +
 drivers/scsi/lpfc/lpfc_ct.c                 | 1 +
 drivers/scsi/lpfc/lpfc_debugfs.c            | 1 +
 drivers/scsi/lpfc/lpfc_els.c                | 1 +
 drivers/scsi/lpfc/lpfc_hbadisc.c            | 1 +
 drivers/scsi/lpfc/lpfc_init.c               | 1 +
 drivers/scsi/lpfc/lpfc_mbox.c               | 1 +
 drivers/scsi/lpfc/lpfc_mem.c                | 1 +
 drivers/scsi/lpfc/lpfc_nportdisc.c          | 1 +
 drivers/scsi/lpfc/lpfc_scsi.c               | 1 +
 drivers/scsi/lpfc/lpfc_sli.c                | 1 +
 drivers/scsi/lpfc/lpfc_vport.c              | 1 +
 drivers/scsi/mac_esp.c                      | 1 +
 drivers/scsi/megaraid.c                     | 1 +
 drivers/scsi/megaraid/megaraid_mbox.c       | 1 +
 drivers/scsi/megaraid/megaraid_mm.c         | 1 +
 drivers/scsi/megaraid/megaraid_sas.c        | 1 +
 drivers/scsi/mesh.c                         | 1 -
 drivers/scsi/mpt2sas/mpt2sas_config.c       | 1 +
 drivers/scsi/mpt2sas/mpt2sas_scsih.c        | 1 +
 drivers/scsi/mpt2sas/mpt2sas_transport.c    | 1 +
 drivers/scsi/mvme16x_scsi.c                 | 1 +
 drivers/scsi/mvsas/mv_sas.h                 | 1 +
 drivers/scsi/ncr53c8xx.c                    | 1 +
 drivers/scsi/nsp32.c                        | 1 -
 drivers/scsi/osd/osd_initiator.c            | 2 ++
 drivers/scsi/osd/osd_uld.c                  | 1 +
 drivers/scsi/osst.c                         | 1 +
 drivers/scsi/pm8001/pm8001_ctl.c            | 1 +
 drivers/scsi/pm8001/pm8001_hwi.c            | 1 +
 drivers/scsi/pm8001/pm8001_init.c           | 1 +
 drivers/scsi/pm8001/pm8001_sas.c            | 1 +
 drivers/scsi/pmcraid.c                      | 1 +
 drivers/scsi/ppa.c                          | 1 +
 drivers/scsi/ps3rom.c                       | 1 +
 drivers/scsi/qla1280.c                      | 1 -
 drivers/scsi/qla2xxx/qla_attr.c             | 1 +
 drivers/scsi/qla2xxx/qla_init.c             | 1 +
 drivers/scsi/qla2xxx/qla_isr.c              | 1 +
 drivers/scsi/qla2xxx/qla_mbx.c              | 1 +
 drivers/scsi/qla2xxx/qla_mid.c              | 1 +
 drivers/scsi/qla2xxx/qla_os.c               | 1 +
 drivers/scsi/qla2xxx/qla_sup.c              | 1 +
 drivers/scsi/qla4xxx/ql4_os.c               | 1 +
 drivers/scsi/qlogicpti.c                    | 2 +-
 drivers/scsi/scsi_debug.c                   | 1 +
 drivers/scsi/scsi_devinfo.c                 | 1 +
 drivers/scsi/scsi_error.c                   | 1 +
 drivers/scsi/scsi_netlink.c                 | 1 +
 drivers/scsi/scsi_proc.c                    | 2 +-
 drivers/scsi/scsi_scan.c                    | 1 +
 drivers/scsi/scsi_sysfs.c                   | 1 +
 drivers/scsi/scsi_tgt_if.c                  | 1 +
 drivers/scsi/scsi_tgt_lib.c                 | 1 +
 drivers/scsi/scsi_transport_fc.c            | 1 +
 drivers/scsi/scsi_transport_iscsi.c         | 1 +
 drivers/scsi/scsi_transport_spi.c           | 1 +
 drivers/scsi/scsicam.c                      | 1 +
 drivers/scsi/sd.c                           | 1 +
 drivers/scsi/ses.c                          | 1 +
 drivers/scsi/sg.c                           | 1 +
 drivers/scsi/sim710.c                       | 1 +
 drivers/scsi/sni_53c710.c                   | 1 +
 drivers/scsi/sr.c                           | 1 +
 drivers/scsi/sr_ioctl.c                     | 1 +
 drivers/scsi/sr_vendor.c                    | 1 +
 drivers/scsi/st.c                           | 1 +
 drivers/scsi/stex.c                         | 1 +
 drivers/scsi/sun3_NCR5380.c                 | 1 +
 drivers/scsi/sun3x_esp.c                    | 1 +
 drivers/scsi/sun_esp.c                      | 1 +
 drivers/scsi/tmscsim.c                      | 1 +
 drivers/scsi/u14-34f.c                      | 1 +
 drivers/scsi/vmw_pvscsi.c                   | 1 +
 drivers/scsi/wd7000.c                       | 1 -
 drivers/scsi/zorro7xx.c                     | 1 +
 165 files changed, 158 insertions(+), 11 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 84d3bbaa95e..e9788f55ab1 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -91,6 +91,7 @@
 #include <linux/time.h>
 #include <linux/mutex.h>
 #include <linux/smp_lock.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index 4d314d740de..54c5ffb1eaa 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -65,6 +65,7 @@
 #include <linux/time.h>
 #include <linux/mutex.h>
 #include <linux/smp_lock.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index f65a1e92340..5faf903ca8c 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -205,6 +205,7 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/delay.h>
+#include <linux/gfp.h>
 #include <linux/pci.h>
 #include <linux/time.h>
 #include <linux/mutex.h>
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 9f4a911a6d8..80dc3ac12cd 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -117,6 +117,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
+#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 1ddcf4031d4..fc0b4b81d55 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -42,6 +42,7 @@
 #include <linux/spinlock.h>
 #include <linux/jiffies.h>
 #include <linux/dma-mapping.h>
+#include <linux/slab.h>
 #include <scsi/scsicam.h>
 
 #include <asm/dma.h>
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index 1cdf09a4779..8647256ad66 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -97,6 +97,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mca.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/NCR_Q720.c b/drivers/scsi/NCR_Q720.c
index a8bbdc2273b..afdbb9addf1 100644
--- a/drivers/scsi/NCR_Q720.c
+++ b/drivers/scsi/NCR_Q720.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mca.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index ff5716d5f04..dbbc601948e 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -69,7 +69,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c
index 4b38c4750f7..d8fe5b76fee 100644
--- a/drivers/scsi/a2091.c
+++ b/drivers/scsi/a2091.c
@@ -1,5 +1,6 @@
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index 6970ce82c4a..c35fc55f1c9 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -1,5 +1,6 @@
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c
index e3519fa5a3b..11ae6be8aea 100644
--- a/drivers/scsi/a4000t.c
+++ b/drivers/scsi/a4000t.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
 #include <scsi/scsi_host.h>
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index f70d9f8e79e..04057ab72a8 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -33,7 +33,6 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
-#include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/completion.h>
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index b6a3c5c187b..622c21c68e6 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -33,7 +33,6 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
-#include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/completion.h>
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 1e5478abd90..8eab8587ff2 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -254,6 +254,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/list.h>
+#include <linux/slab.h>
 #include <scsi/scsicam.h>
 
 #include "scsi.h"
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 80594947c6f..2a8cf137f60 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -39,6 +39,7 @@
 #include <linux/blkdev.h>
 #include <linux/mca.h>
 #include <linux/mca-legacy.h>
+#include <linux/slab.h>
 
 #include <asm/dma.h>
 #include <asm/system.h>
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index 538135783aa..0107a4cc333 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -50,6 +50,7 @@
 #include <linux/device.h>
 #include <linux/eisa.h>
 #include <linux/dma-mapping.h>
+#include <linux/gfp.h>
 
 #include <asm/dma.h>
 #include <asm/system.h>
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 1222a7ac698..4c41332a354 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -53,6 +53,7 @@ static struct scsi_transport_template *ahd_linux_transport_template = NULL;
 #include <linux/blkdev.h>		/* For block_size() */
 #include <linux/delay.h>	/* For ssleep/msleep */
 #include <linux/device.h>
+#include <linux/slab.h>
 
 /*
  * Bucket size for counting good commands in between bad ones.
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 8cb05dc8e6a..5e42dac2350 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -129,6 +129,7 @@ static struct scsi_transport_template *ahc_linux_transport_template = NULL;
 #include <linux/mm.h>		/* For fetching system memory size */
 #include <linux/blkdev.h>		/* For block_size() */
 #include <linux/delay.h>	/* For ssleep/msleep */
+#include <linux/slab.h>
 
 
 /*
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
index eb9dc3195fd..81b736c76ff 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -25,6 +25,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/firmware.h>
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 996f7224f90..24ac2315c5c 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -30,6 +30,7 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/firmware.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi_host.h>
 
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index ca55013b6ae..c43698b1cb6 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -24,6 +24,7 @@
  *
  */
 
+#include <linux/gfp.h>
 #include <scsi/scsi_host.h>
 
 #include "aic94xx.h"
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c
index 8630a75b287..edb43fda9f3 100644
--- a/drivers/scsi/aic94xx/aic94xx_sds.c
+++ b/drivers/scsi/aic94xx/aic94xx_sds.c
@@ -26,6 +26,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 
 #include "aic94xx.h"
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 8f98e33155e..d01dcc62b39 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gfp.h>
 #include <linux/pci.h>
 #include <linux/module.h>
 #include <linux/firmware.h>
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
index 78eb86fc627..0add73bdf2a 100644
--- a/drivers/scsi/aic94xx/aic94xx_tmf.c
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -25,6 +25,7 @@
  */
 
 #include <linux/spinlock.h>
+#include <linux/gfp.h>
 #include "aic94xx.h"
 #include "aic94xx_sas.h"
 #include "aic94xx_hwi.h"
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 47d5d19f8c9..ffbe2192da3 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -58,6 +58,7 @@
 #include <linux/timer.h>
 #include <linux/pci.h>
 #include <linux/aer.h>
+#include <linux/slab.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 4240b05aef6..158ebc3644d 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -651,6 +651,7 @@ static inline void NCR5380_print_phase(struct Scsi_Host *instance)
  * interrupt or bottom half.
  */
 
+#include <linux/gfp.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index b137e561f5b..ab5bdda6903 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -29,6 +29,7 @@
 #include <linux/pci.h>
 #include <linux/blkdev.h>
 #include <linux/dma-mapping.h>
+#include <linux/slab.h>
 #include <asm/system.h>
 #include <asm/io.h>
 
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index fcfb29e02d8..dd5b105f8f4 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -19,6 +19,7 @@
  */
 #include <linux/reboot.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/blkdev.h>
 #include <linux/pci.h>
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 6bff08ea402..13f5feb308c 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -19,6 +19,7 @@
  *  bfad.c Linux driver PCI interface module.
  */
 
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/kthread.h>
 #include "bfad_drv.h"
diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c
index d97f6919183..6a2efdd5ef2 100644
--- a/drivers/scsi/bfa/bfad_attr.c
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -19,6 +19,7 @@
  *  bfa_attr.c Linux driver configuration interface module.
  */
 
+#include <linux/slab.h>
 #include "bfad_drv.h"
 #include "bfad_im.h"
 #include "bfad_trcmod.h"
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index f9fc67a25bf..78f42aa5736 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -19,6 +19,7 @@
  *  bfad_im.c Linux driver IM module.
  */
 
+#include <linux/slab.h>
 #include "bfad_drv.h"
 #include "bfad_im.h"
 #include "bfad_trcmod.h"
diff --git a/drivers/scsi/bfa/rport.c b/drivers/scsi/bfa/rport.c
index 8e73dd9a625..7b096f2e383 100644
--- a/drivers/scsi/bfa/rport.c
+++ b/drivers/scsi/bfa/rport.c
@@ -19,6 +19,7 @@
  *  rport.c Remote port implementation.
  */
 
+#include <linux/slab.h>
 #include <bfa.h>
 #include <bfa_svc.h>
 #include "fcbuild.h"
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 1af578dec27..18352ff8210 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -11,6 +11,7 @@
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
  */
 
+#include <linux/gfp.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/libiscsi.h>
 #include "bnx2i.h"
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index cb71dc98479..f2e9b18fe76 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -12,6 +12,7 @@
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
  */
 
+#include <linux/slab.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/libiscsi.h>
 #include "bnx2i.h"
diff --git a/drivers/scsi/bvme6000_scsi.c b/drivers/scsi/bvme6000_scsi.c
index 5799cb5cba6..d40ea2f5be1 100644
--- a/drivers/scsi/bvme6000_scsi.c
+++ b/drivers/scsi/bvme6000_scsi.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <asm/bvme6000hw.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index fe11c1d4b31..4799d439120 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -23,6 +23,7 @@
 #include <linux/mutex.h>
 #include <linux/idr.h>
 #include <linux/smp_lock.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
index 344fd53b995..b58d9134ac1 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
@@ -10,6 +10,7 @@
  * Written by: Karen Xie (kxie@chelsio.com)
  */
 
+#include <linux/slab.h>
 #include <linux/skbuff.h>
 #include <linux/scatterlist.h>
 
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.h b/drivers/scsi/cxgb3i/cxgb3i_ddp.h
index 87dd56b422b..6761b329124 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.h
@@ -13,6 +13,7 @@
 #ifndef __CXGB3I_ULP2_DDP_H__
 #define __CXGB3I_ULP2_DDP_H__
 
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 /**
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index b7c30585dad..7b686abaae6 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/inet.h>
+#include <linux/slab.h>
 #include <linux/crypto.h>
 #include <linux/if_vlan.h>
 #include <net/dst.h>
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index 3e08c430ff2..a175be9c496 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/if_vlan.h>
+#include <linux/slab.h>
 #include <linux/version.h>
 
 #include "cxgb3_defs.h"
diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
index 9c38539557f..dc5e3e77a35 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
@@ -12,6 +12,7 @@
  * Written by: Karen Xie (kxie@chelsio.com)
  */
 
+#include <linux/slab.h>
 #include <linux/skbuff.h>
 #include <linux/crypto.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 6c59c02c1ed..bd977be7544 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -57,6 +57,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index e19a1a55270..6fae3d285ae 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -21,6 +21,7 @@
  *               Mike Anderson <andmike@linux.vnet.ibm.com>
  */
 
+#include <linux/slab.h>
 #include <scsi/scsi_dh.h>
 #include "../scsi_priv.h"
 
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index bc9e94f5915..1a970a76b1b 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  *
  */
+#include <linux/slab.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dh.h>
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 63032ec3db9..e8a0bc3efd4 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -20,6 +20,7 @@
  * along with this program; see the file COPYING.  If not, write to
  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  */
+#include <linux/slab.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dh.h>
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 857fdd6032b..e3916641e62 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -21,6 +21,7 @@
  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/slab.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_eh.h>
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 1a660191a90..5b683e42954 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -23,6 +23,7 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dh.h>
 #include <linux/workqueue.h>
+#include <linux/slab.h>
 
 #define RDAC_NAME "rdac"
 #define RDAC_RETRY_COUNT 5
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index 3c5abf7cd76..d1c31378f6d 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -490,6 +490,7 @@
 #include <linux/ctype.h>
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
+#include <linux/slab.h>
 #include <asm/byteorder.h>
 #include <asm/dma.h>
 #include <asm/io.h>
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 152dd15db27..60886c19065 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -50,7 +50,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/in.h>
 #include <linux/pci.h>
 #include <linux/proc_fs.h>
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 2f47ae7cce9..f01b9b44e8a 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -26,6 +26,7 @@
 #include <linux/if_ether.h>
 #include <linux/if_vlan.h>
 #include <linux/crc32.h>
+#include <linux/slab.h>
 #include <linux/cpu.h>
 #include <linux/fs.h>
 #include <linux/sysfs.h>
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 511cb6b371e..3440da48d16 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -31,6 +31,7 @@
 #include <linux/if_vlan.h>
 #include <linux/errno.h>
 #include <linux/bitops.h>
+#include <linux/slab.h>
 #include <net/rtnetlink.h>
 
 #include <scsi/fc/fc_els.h>
diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c
index 85bd54c77b5..2ad95aa8f58 100644
--- a/drivers/scsi/fd_mcs.c
+++ b/drivers/scsi/fd_mcs.c
@@ -88,6 +88,7 @@
 #include <linux/delay.h>
 #include <linux/mca.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
 #include <scsi/scsicam.h>
 #include <linux/mca-legacy.h>
 
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 32eef66114c..e296bcc57d5 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -279,6 +279,7 @@
 #include <linux/stat.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <scsi/scsicam.h>
 
 #include <asm/system.h>
diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
index 54f8d0e5407..5259888fbfb 100644
--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -17,6 +17,7 @@
  */
 #include <linux/errno.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/skbuff.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 507e26c1c29..97b212570bc 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/mempool.h>
 #include <linux/string.h>
+#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/pci.h>
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 65a39b0f6dc..3cc47c6e1ad 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -26,6 +26,7 @@
 #include <linux/if_ether.h>
 #include <linux/if_vlan.h>
 #include <linux/delay.h>
+#include <linux/gfp.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c
index 56677064508..db710148d15 100644
--- a/drivers/scsi/fnic/vnic_dev.c
+++ b/drivers/scsi/fnic/vnic_dev.c
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/if_ether.h>
+#include <linux/slab.h>
 #include "vnic_resource.h"
 #include "vnic_devcmd.h"
 #include "vnic_dev.h"
diff --git a/drivers/scsi/fnic/vnic_rq.c b/drivers/scsi/fnic/vnic_rq.c
index bedd0d28563..fd2068f5ae1 100644
--- a/drivers/scsi/fnic/vnic_rq.c
+++ b/drivers/scsi/fnic/vnic_rq.c
@@ -20,6 +20,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include "vnic_dev.h"
 #include "vnic_rq.h"
 
diff --git a/drivers/scsi/fnic/vnic_wq.c b/drivers/scsi/fnic/vnic_wq.c
index 1f9ea790d13..a414135460d 100644
--- a/drivers/scsi/fnic/vnic_wq.c
+++ b/drivers/scsi/fnic/vnic_wq.c
@@ -20,6 +20,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include "vnic_dev.h"
 #include "vnic_wq.h"
 
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index ba3c94c9c25..35a4b3073ec 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -121,6 +121,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/smp_lock.h>
+#include <linux/slab.h>
 
 #ifdef GDTH_RTC
 #include <linux/mc146818rtc.h>
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index ffb2b21992b..0572b9bf4bd 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -3,6 +3,7 @@
  */
 
 #include <linux/completion.h>
+#include <linux/slab.h>
 
 int gdth_proc_info(struct Scsi_Host *host, char *buffer,char **start,off_t offset,int length,   
                    int inout)
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 5d1bf7e3d24..48f406850c6 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -1,5 +1,6 @@
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 09dbcb847b7..6660fa92ffa 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/blkdev.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/string.h>
 #include <linux/mm.h>
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 4f0556571f8..645f7cdf21a 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/spinlock.h>
+#include <linux/gfp.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/div64.h>
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 4e577e2fee3..c2eea711a5c 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
+#include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pm.h>
 #include <linux/stringify.h>
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index dc1bcbe3b17..ff5ec5ac1fb 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -70,6 +70,7 @@
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pm.h>
 #include <asm/firmware.h>
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index d5eaf972710..e2056d517e9 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -23,6 +23,7 @@
  */
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_srp.h>
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index 63a30cbbf9d..a864ccc0a34 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -32,6 +32,7 @@
 #include <asm/iommu.h>
 #include <asm/hvcall.h>
 #include <linux/dma-mapping.h>
+#include <linux/gfp.h>
 #include <linux/interrupt.h>
 #include "ibmvscsi.h"
 
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index c2a9a13d788..4734ab0b3ff 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -15,6 +15,7 @@
 #include <linux/parport.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index c79cd98eb6b..520461b9bc0 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -59,6 +59,7 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 249053a9d4f..0ee725ced51 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -28,6 +28,7 @@
 
 #include <linux/types.h>
 #include <linux/inet.h>
+#include <linux/slab.h>
 #include <linux/file.h>
 #include <linux/blkdev.h>
 #include <linux/crypto.h>
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index b2d481dd375..08e26d4e373 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/gfp.h>
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index b3d31315ac3..23880f8fe7e 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -40,6 +40,7 @@
 #include <linux/blkdev.h>
 #include <linux/ioport.h>
 #include <linux/dma-mapping.h>
+#include <linux/slab.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index 9b0a5192a96..1087a7f18e8 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -33,6 +33,7 @@
  */
 
 #include <linux/timer.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 7f4364770e4..e5df0d4db67 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -24,7 +24,7 @@
  */
 
 #include <linux/timer.h>
-#include <linux/gfp.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 
 #include <scsi/fc/fc_fc2.h>
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 774e7ac837a..17396c708b0 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -27,6 +27,7 @@
 #include <linux/scatterlist.h>
 #include <linux/err.h>
 #include <linux/crc32.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/libfc/fc_frame.c b/drivers/scsi/libfc/fc_frame.c
index 6da01c61696..981329a17c4 100644
--- a/drivers/scsi/libfc/fc_frame.c
+++ b/drivers/scsi/libfc/fc_frame.c
@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/skbuff.h>
 #include <linux/crc32.h>
+#include <linux/gfp.h>
 
 #include <scsi/fc_frame.h>
 
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 7ec8ce75007..d126ecfff70 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -88,6 +88,7 @@
  */
 
 #include <linux/timer.h>
+#include <linux/slab.h>
 #include <asm/unaligned.h>
 
 #include <scsi/fc/fc_gs.h>
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 97923bb0776..b37d0ff28b3 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -47,6 +47,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <linux/rcupdate.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 685eaec5321..abdb66d30eb 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -25,6 +25,7 @@
 #include <linux/kfifo.h>
 #include <linux/delay.h>
 #include <linux/log2.h>
+#include <linux/slab.h>
 #include <asm/unaligned.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 4ad87fd74dd..5c92620292f 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -29,6 +29,7 @@
 #include <linux/types.h>
 #include <linux/list.h>
 #include <linux/inet.h>
+#include <linux/slab.h>
 #include <linux/file.h>
 #include <linux/blkdev.h>
 #include <linux/crypto.h>
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index e1550117069..b00efd19aad 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/scatterlist.h>
+#include <linux/slab.h>
 
 #include <scsi/sas_ata.h>
 #include "sas_internal.h"
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index facc5bfcf7d..f5831930df9 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/scatterlist.h>
+#include <linux/slab.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_eh.h>
 #include "sas_internal.h"
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 33cf988c8c8..c65af02dcfe 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -24,6 +24,7 @@
 
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
+#include <linux/slab.h>
 
 #include "sas_internal.h"
 
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index 1bc3b756799..04ad8dd1a74 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -10,6 +10,7 @@
  */
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
+#include <linux/slab.h>
 
 #include "sas_internal.h"
 
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index 9cd5abe9e71..2dc55343f67 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -24,6 +24,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/spinlock.h>
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 14b13196b22..2660e1b4569 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -44,6 +44,7 @@
 #include <linux/err.h>
 #include <linux/blkdev.h>
 #include <linux/freezer.h>
+#include <linux/gfp.h>
 #include <linux/scatterlist.h>
 #include <linux/libata.h>
 
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index 22775165bf6..ff6a28ce9b6 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -19,6 +19,7 @@
  * 02110-1301 USA
  */
 #include <linux/err.h>
+#include <linux/slab.h>
 #include <linux/kfifo.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 64cd17eedb6..1849e33e68f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -24,6 +24,7 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/aer.h>
+#include <linux/gfp.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 692c29f6048..ec3723831e8 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/mempool.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index c7e921973f6..463b74902ac 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -25,6 +25,7 @@
 #include <linux/blkdev.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <linux/utsname.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 391584183d8..a80d938fafc 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -24,6 +24,7 @@
 #include <linux/idr.h>
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/ctype.h>
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ee980bd6686..5fbdb22c189 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -21,6 +21,7 @@
 /* See Fibre Channel protocol T11 FC-LS for details */
 #include <linux/blkdev.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index c555e3b7f20..e1466eec56b 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -20,6 +20,7 @@
  *******************************************************************/
 
 #include <linux/blkdev.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/kthread.h>
 #include <linux/interrupt.h>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ea44239eeb3..774663e8e1f 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -29,6 +29,7 @@
 #include <linux/spinlock.h>
 #include <linux/ctype.h>
 #include <linux/aer.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1e61ae3bc4e..72e6adb0643 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -21,6 +21,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index a1b6db6016d..8f879e477e9 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -20,6 +20,7 @@
  *******************************************************************/
 
 #include <linux/mempool.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index d20ae6b3b3c..e331204a4d5 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -21,6 +21,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index b16bb2c9978..dccdb822328 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -19,6 +19,7 @@
  * included with this package.                                     *
  *******************************************************************/
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <asm/unaligned.h>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index fe6660ca645..049fb9a17b3 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -23,6 +23,7 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 869f76cbc58..ffd575c379f 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index 4a90eaf7cb6..3893337e3dd 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/nubus.h>
+#include <linux/slab.h>
 
 #include <asm/irq.h>
 #include <asm/dma.h>
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 49eb0612d5a..4bf7edca9e6 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -47,6 +47,7 @@
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/smp_lock.h>
+#include <linux/slab.h>
 #include <scsi/scsicam.h>
 
 #include "scsi.h"
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 7f977967b88..a7810a106b3 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -70,6 +70,7 @@
  * For history of changes, see Documentation/ChangeLog.megaraid
  */
 
+#include <linux/slab.h>
 #include "megaraid_mbox.h"
 
 static int megaraid_init(void);
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index f680561d2c6..36e0b7d05c1 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -15,6 +15,7 @@
  * Common management module
  */
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include "megaraid_mm.h"
 
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 409648f5845..99e4478c3f3 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/smp_lock.h>
 #include <linux/uio.h>
+#include <linux/slab.h>
 #include <asm/uaccess.h>
 #include <linux/fs.h>
 #include <linux/compat.h>
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index 11aa917629a..a1c97e88068 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -23,7 +23,6 @@
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 411c27d7f78..cf44b355bc9 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -51,6 +51,7 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "mpt2sas_base.h"
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index c7ec3f17478..be171ed682e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -53,6 +53,7 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/raid_class.h>
+#include <linux/slab.h>
 
 #include "mpt2sas_base.h"
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 789f9ee7f00..bd7ca2b49f8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -49,6 +49,7 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/mvme16x_scsi.c b/drivers/scsi/mvme16x_scsi.c
index b5fbfd6ce87..39f554f5f26 100644
--- a/drivers/scsi/mvme16x_scsi.c
+++ b/drivers/scsi/mvme16x_scsi.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <asm/mvme16xhw.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index aa2270af1ba..885858bcc40 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -36,6 +36,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <scsi/libsas.h>
 #include <scsi/scsi_tcq.h>
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index a2d56982830..d013a2aa2fd 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -98,6 +98,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/errno.h>
+#include <linux/gfp.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 2c98a6ee973..4c1e5454520 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/ioport.h>
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 60de8509150..ee4b6914667 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -39,6 +39,8 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <linux/slab.h>
+
 #include <scsi/osd_initiator.h>
 #include <scsi/osd_sec.h>
 #include <scsi/osd_attributes.h>
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index 0a90702b3d7..ffdd9fdb999 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -50,6 +50,7 @@
 #include <linux/idr.h>
 #include <linux/major.h>
 #include <linux/file.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_driver.h>
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index acb835837ee..b219118f8bd 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -38,6 +38,7 @@ static const char * osst_version = "0.99.4";
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/errno.h>
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 14b13acae6d..45bc197bc22 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -38,6 +38,7 @@
  *
  */
 #include <linux/firmware.h>
+#include <linux/slab.h>
 #include "pm8001_sas.h"
 #include "pm8001_ctl.h"
 
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 7985ae45d68..909c00ec044 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -37,6 +37,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  *
  */
+ #include <linux/slab.h>
  #include "pm8001_sas.h"
  #include "pm8001_hwi.h"
  #include "pm8001_chips.h"
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index f80c1da8f6c..f8c86b28f03 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -38,6 +38,7 @@
  *
  */
 
+#include <linux/slab.h>
 #include "pm8001_sas.h"
 #include "pm8001_chips.h"
 
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 3b2c98fba83..bff4f5139b9 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -38,6 +38,7 @@
  *
  */
 
+#include <linux/slab.h>
 #include "pm8001_sas.h"
 
 /**
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 9b1c1433c26..53aefffbaea 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -41,6 +41,7 @@
 #include <linux/hdreg.h>
 #include <linux/version.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <asm/irq.h>
 #include <asm/processor.h>
 #include <linux/libata.h>
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index 8aa0bd987e2..7bc2d796e40 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -10,6 +10,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/blkdev.h>
 #include <linux/parport.h>
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index db90caf43f4..92ffbb51049 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -20,6 +20,7 @@
 
 #include <linux/cdrom.h>
 #include <linux/highmem.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 49ac4148493..8ef87781e51 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -346,7 +346,6 @@
 #include <linux/pci.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
-#include <linux/slab.h>
 #include <linux/pci_ids.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 90d1e062ec4..29414df87c3 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -8,6 +8,7 @@
 
 #include <linux/kthread.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 
 static int qla24xx_vport_disable(struct fc_vport *, bool);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a67b2bafb88..4229bb483c5 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -8,6 +8,7 @@
 #include "qla_gbl.h"
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 #include "qla_devtbl.h"
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ab90329ff2e..875adb45e75 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -7,6 +7,7 @@
 #include "qla_def.h"
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_bsg_fc.h>
 
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 6e53bdbb1da..e95ebab5867 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -7,6 +7,7 @@
 #include "qla_def.h"
 
 #include <linux/delay.h>
+#include <linux/gfp.h>
 
 
 /*
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index ff17dee2861..8220e7b9799 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -9,6 +9,7 @@
 
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 #include <linux/list.h>
 
 #include <scsi/scsi_tcq.h>
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 46720b23028..b696cffb82e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -12,6 +12,7 @@
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/kobject.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsicam.h>
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 371dc895972..8b3de4e54c2 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -7,6 +7,7 @@
 #include "qla_def.h"
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 83c8b5e4fc8..2ccad36bee9 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -5,6 +5,7 @@
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
 #include <linux/moduleparam.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsicam.h>
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 1b8217076b0..aa406497eeb 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -16,7 +16,7 @@
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
 #include <linux/blkdev.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 0b575c87100..3e10c306de9 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/timer.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/genhd.h>
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 37af178b2d1..43fad4c09be 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -6,6 +6,7 @@
 #include <linux/moduleparam.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_devinfo.h>
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 08ed506e605..d45c69ca573 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -16,6 +16,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/gfp.h>
 #include <linux/timer.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index 0fd6ae6911a..d53e6503c6d 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -22,6 +22,7 @@
 #include <linux/jiffies.h>
 #include <linux/security.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <net/sock.h>
 #include <net/netlink.h>
 
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index 77fbddb507f..c99da926fda 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -20,12 +20,12 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/errno.h>
 #include <linux/blkdev.h>
 #include <linux/seq_file.h>
 #include <linux/mutex.h>
+#include <linux/gfp.h>
 #include <asm/uaccess.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 4bc8b77a2ef..38518b08807 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -33,6 +33,7 @@
 #include <linux/kthread.h>
 #include <linux/spinlock.h>
 #include <linux/async.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 19ec9e2d3f3..429c9b73e3e 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/device.h>
diff --git a/drivers/scsi/scsi_tgt_if.c b/drivers/scsi/scsi_tgt_if.c
index 0e9533f7aab..a87e21c35ef 100644
--- a/drivers/scsi/scsi_tgt_if.c
+++ b/drivers/scsi/scsi_tgt_if.c
@@ -20,6 +20,7 @@
  * 02110-1301 USA
  */
 #include <linux/miscdevice.h>
+#include <linux/gfp.h>
 #include <linux/file.h>
 #include <linux/smp_lock.h>
 #include <net/tcp.h>
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index 10303272ba4..66241dd525a 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -23,6 +23,7 @@
 #include <linux/hash.h>
 #include <linux/module.h>
 #include <linux/pagemap.h>
+#include <linux/slab.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 1d5b72173dd..a895a0e76d1 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -27,6 +27,7 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index ea3892e7e0f..1e6d4793542 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -22,6 +22,7 @@
  */
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 #include <net/tcp.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index c25bd9a34e0..8a172d4f456 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -25,6 +25,7 @@
 #include <linux/blkdev.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
+#include <linux/slab.h>
 #include <scsi/scsi.h>
 #include "scsi_priv.h"
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/scsicam.c b/drivers/scsi/scsicam.c
index 3f21bc65e8c..6803b1e26ec 100644
--- a/drivers/scsi/scsicam.c
+++ b/drivers/scsi/scsicam.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/genhd.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 7b75c8a2a49..58c62ff42ab 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -49,6 +49,7 @@
 #include <linux/mutex.h>
 #include <linux/string_helpers.h>
 #include <linux/async.h>
+#include <linux/slab.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 0d9d6f7567f..7f5a6a86f82 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -21,6 +21,7 @@
 **-----------------------------------------------------------------------------
 */
 
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/enclosure.h>
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index c996d98636f..dee1c96288d 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -38,6 +38,7 @@ static int sg_version_num = 30534;	/* 2 digits for each component */
 #include <linux/errno.h>
 #include <linux/mtio.h>
 #include <linux/ioctl.h>
+#include <linux/slab.h>
 #include <linux/fcntl.h>
 #include <linux/init.h>
 #include <linux/poll.h>
diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c
index 6dc8b846c11..8ac6ce792b6 100644
--- a/drivers/scsi/sim710.c
+++ b/drivers/scsi/sim710.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/slab.h>
 
 #include <linux/blkdev.h>
 #include <linux/device.h>
diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c
index 56cf0bb4ed1..9acc2b2a360 100644
--- a/drivers/scsi/sni_53c710.c
+++ b/drivers/scsi/sni_53c710.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/mm.h>
 #include <linux/blkdev.h>
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index d6f340f48a3..0a90abc7f14 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -44,6 +44,7 @@
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 #include <asm/uaccess.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index 291236e6e43..cbb38c5197f 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -7,6 +7,7 @@
 #include <linux/blkpg.h>
 #include <linux/cdrom.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c
index 4ad3e017213..92cc2efb25d 100644
--- a/drivers/scsi/sr_vendor.c
+++ b/drivers/scsi/sr_vendor.c
@@ -39,6 +39,7 @@
 #include <linux/string.h>
 #include <linux/bcd.h>
 #include <linux/blkdev.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index f67d1a159aa..3ea1a713ef2 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -27,6 +27,7 @@ static const char *verstr = "20081215";
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/string.h>
+#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/mtio.h>
 #include <linux/cdrom.h>
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index fd7b15be764..9c73dbda3bb 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/pci.h>
 #include <linux/blkdev.h>
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 75da6e58ce5..b5838d547c6 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -645,6 +645,7 @@ __inline__ void NCR5380_print_phase(struct Scsi_Host *instance) { };
  * interrupt or bottom half.
  */
 
+#include <linux/gfp.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index 34a99620e5b..0621037f027 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/gfp.h>
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>
diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c
index 3d73aad4bc8..fc23d273fb1 100644
--- a/drivers/scsi/sun_esp.c
+++ b/drivers/scsi/sun_esp.c
@@ -12,6 +12,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/gfp.h>
 
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 9a4273445c0..27866b0adfe 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -233,6 +233,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 26e8e0e6b8d..5d9fdeeb231 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -420,6 +420,7 @@
 #include <linux/init.h>
 #include <linux/ctype.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
 #include <asm/dma.h>
 #include <asm/irq.h>
 
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index e4ac5829b63..26894459c37 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/pci.h>
 
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index 2f6e9d8eaf7..d0b7d2ff9ac 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -171,7 +171,6 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 #include <linux/proc_fs.h>
diff --git a/drivers/scsi/zorro7xx.c b/drivers/scsi/zorro7xx.c
index 64d40a2d4d4..105449c15fa 100644
--- a/drivers/scsi/zorro7xx.c
+++ b/drivers/scsi/zorro7xx.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/zorro.h>
+#include <linux/slab.h>
 
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
-- 
cgit v1.2.3-18-g5258


From 229bab6bacc42295f13c0434772381a88ce2308b Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 15 Mar 2010 11:26:56 +0300
Subject: [SCSI] dpt_i2o: several use after free issues

adpt_i2o_delete_hba() calls kfree() so we have to save "pHba->next"
before calling it.  Also inside adpt_i2o_delete_hba() itself, there
was another use after free bug which I fixed by moving the kfree()
down a line.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/dpt_i2o.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 496764349c4..0435d044c9d 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -188,7 +188,8 @@ MODULE_DEVICE_TABLE(pci,dptids);
 static int adpt_detect(struct scsi_host_template* sht)
 {
 	struct pci_dev *pDev = NULL;
-	adpt_hba* pHba;
+	adpt_hba *pHba;
+	adpt_hba *next;
 
 	PINFO("Detecting Adaptec I2O RAID controllers...\n");
 
@@ -206,7 +207,8 @@ static int adpt_detect(struct scsi_host_template* sht)
 	}
 
 	/* In INIT state, Activate IOPs */
-	for (pHba = hba_chain; pHba; pHba = pHba->next) {
+	for (pHba = hba_chain; pHba; pHba = next) {
+		next = pHba->next;
 		// Activate does get status , init outbound, and get hrt
 		if (adpt_i2o_activate_hba(pHba) < 0) {
 			adpt_i2o_delete_hba(pHba);
@@ -243,7 +245,8 @@ rebuild_sys_tab:
 	PDEBUG("HBA's in OPERATIONAL state\n");
 
 	printk("dpti: If you have a lot of devices this could take a few minutes.\n");
-	for (pHba = hba_chain; pHba; pHba = pHba->next) {
+	for (pHba = hba_chain; pHba; pHba = next) {
+		next = pHba->next;
 		printk(KERN_INFO"%s: Reading the hardware resource table.\n", pHba->name);
 		if (adpt_i2o_lct_get(pHba) < 0){
 			adpt_i2o_delete_hba(pHba);
@@ -263,7 +266,8 @@ rebuild_sys_tab:
 		adpt_sysfs_class = NULL;
 	}
 
-	for (pHba = hba_chain; pHba; pHba = pHba->next) {
+	for (pHba = hba_chain; pHba; pHba = next) {
+		next = pHba->next;
 		if (adpt_scsi_host_alloc(pHba, sht) < 0){
 			adpt_i2o_delete_hba(pHba);
 			continue;
@@ -1229,11 +1233,10 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
 		}
 	}
 	pci_dev_put(pHba->pDev);
-	kfree(pHba);
-
 	if (adpt_sysfs_class)
 		device_destroy(adpt_sysfs_class,
 				MKDEV(DPTI_I2O_MAJOR, pHba->unit));
+	kfree(pHba);
 
 	if(hba_count <= 0){
 		unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);   
-- 
cgit v1.2.3-18-g5258


From 4ec3fdbef17d0266826b56b33735dc9dada58c27 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Tue, 16 Mar 2010 16:23:57 +0100
Subject: [SCSI] be2iscsi: fix lock imbalance

Stanse found that one error path in mgmt_invalidate_icds omits to unlock
ctrl->mbox_lock. Fix that.

Added in 756d29c8c7ed8887ed7d752371ce2f (Enable async mode for mcc rings)
where the spinlock was moved.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/be2iscsi/be_mgmt.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 72617b650a7..e641922f20b 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -169,6 +169,7 @@ unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
 		SE_DEBUG(DBG_LVL_1,
 			 "Failed to allocate memory for"
 			 "mgmt_invalidate_icds \n");
+		spin_unlock(&ctrl->mbox_lock);
 		return -1;
 	}
 	nonemb_cmd.size = sizeof(struct invalidate_commands_params_in);
-- 
cgit v1.2.3-18-g5258


From 67221a4226a5fc48e413e2050db266bb171753c4 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Tue, 16 Mar 2010 16:23:58 +0100
Subject: [SCSI] lpfc: fix lock imbalances

Stanse found that two error paths in lpfc_bsg_rport_els_cmp and
lpfc_issue_ct_rsp_cmp omits to unlock phba->ct_ev_lock. It is
because they wrongly unlock phba->hbalock instead. Fix that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/lpfc/lpfc_bsg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index ec3723831e8..d62b3e46792 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -433,7 +433,7 @@ lpfc_bsg_rport_els_cmp(struct lpfc_hba *phba,
 	dd_data = cmdiocbq->context1;
 	/* normal completion and timeout crossed paths, already done */
 	if (!dd_data) {
-		spin_unlock_irqrestore(&phba->hbalock, flags);
+		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
 		return;
 	}
 
@@ -1196,7 +1196,7 @@ lpfc_issue_ct_rsp_cmp(struct lpfc_hba *phba,
 	dd_data = cmdiocbq->context1;
 	/* normal completion and timeout crossed paths, already done */
 	if (!dd_data) {
-		spin_unlock_irqrestore(&phba->hbalock, flags);
+		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
 		return;
 	}
 
-- 
cgit v1.2.3-18-g5258


From bc0beb44f27dc068c1daefc79826c07e0b22ef6c Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Tue, 16 Mar 2010 16:23:59 +0100
Subject: [SCSI] qla2xxx: fix lock imbalance

Stanse found that one error path in qla24xx_bsg_timeout omits to
unlock ha->hardware_lock. Fix that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_attr.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 359e9a71a02..1c7ef55966f 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2393,6 +2393,7 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job)
 	return 0;
 
 done:
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	if (bsg_job->request->msgcode == FC_BSG_HST_CT)
 		kfree(sp->fcport);
 	kfree(sp->ctx);
-- 
cgit v1.2.3-18-g5258


From d7d05548a62c87ee55b0c81933669177f885aa8d Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Wed, 31 Mar 2010 14:41:35 -0500
Subject: [SCSI] iscsi_tcp: fix relogin/shutdown hang

When I made this patch:
b64e77f70b8c11766e967e3485331a9e6ef01390
it was to solve a problem where we were already on the waitqueue
becuase a connection problem/logout caused us to be on there
when we were cleaning up the session. If we happen to get
on queue for more normal reasons like their just does not happen
to be any send space at the same time we are closing the connection
we hit a race and get stuck in the wait.

We should not check if the waitqueue is active
because we could race with the network code. If
the network xmit code is just about to enter the
prepare to wait when we check for the waitqueue to
be active then we will miss each other and the
network code will fall into the wait and we will
not run wake_up.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/iscsi_tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 0ee725ced51..02143af7c1a 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -599,7 +599,7 @@ static void iscsi_sw_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
 	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
 	write_unlock_bh(&tcp_sw_conn->sock->sk->sk_callback_lock);
 
-	if (sock->sk->sk_sleep && waitqueue_active(sock->sk->sk_sleep)) {
+	if (sock->sk->sk_sleep) {
 		sock->sk->sk_err = EIO;
 		wake_up_interruptible(sock->sk->sk_sleep);
 	}
-- 
cgit v1.2.3-18-g5258


From a8f23b03535359c5afeb77d937b89b8a4d87b2b2 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 1 Apr 2010 18:55:16 +0300
Subject: [SCSI] wd7000: fix reset handler typo spin_unlock_irq() =>
 spin_lock_irq()

This was introduced back in 2005 at the very start of the git era by:
	df0ae2497ddefd72a87f3a3b34ff32455d7d4ae0
	[SCSI] allow sleeping in ->eh_host_reset_handler()

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/wd7000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index d0b7d2ff9ac..333580bf37c 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1587,7 +1587,7 @@ static int wd7000_host_reset(struct scsi_cmnd *SCpnt)
 {
 	Adapter *host = (Adapter *) SCpnt->device->host->hostdata;
 
-	spin_unlock_irq(SCpnt->device->host->host_lock);
+	spin_lock_irq(SCpnt->device->host->host_lock);
 
 	if (wd7000_adapter_reset(host) < 0) {
 		spin_unlock_irq(SCpnt->device->host->host_lock);
-- 
cgit v1.2.3-18-g5258


From a71fa1fc43a29133f13ae6ada1a389ca298c0934 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 2 Apr 2010 15:50:24 +0900
Subject: [SCSI] ibmvscsi: fix DMA API misuse

ibmvscsi uses dma_unmap_single() for buffers mapped via
dma_map_sg(). It works however it's the API violation. The DMA debug
facility complains about it:

http://marc.info/?l=linux-scsi&m=127018555013151&w=2

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Tested-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 29 ++---------------------------
 1 file changed, 2 insertions(+), 27 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index ff5ec5ac1fb..88bad0e81bd 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -323,16 +323,6 @@ static void set_srp_direction(struct scsi_cmnd *cmd,
 		srp_cmd->buf_fmt = fmt;
 }
 
-static void unmap_sg_list(int num_entries,
-		struct device *dev,
-		struct srp_direct_buf *md)
-{
-	int i;
-
-	for (i = 0; i < num_entries; ++i)
-		dma_unmap_single(dev, md[i].va, md[i].len, DMA_BIDIRECTIONAL);
-}
-
 /**
  * unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
  * @cmd:	srp_cmd whose additional_data member will be unmapped
@@ -350,24 +340,9 @@ static void unmap_cmd_data(struct srp_cmd *cmd,
 
 	if (out_fmt == SRP_NO_DATA_DESC && in_fmt == SRP_NO_DATA_DESC)
 		return;
-	else if (out_fmt == SRP_DATA_DESC_DIRECT ||
-		 in_fmt == SRP_DATA_DESC_DIRECT) {
-		struct srp_direct_buf *data =
-			(struct srp_direct_buf *) cmd->add_data;
-		dma_unmap_single(dev, data->va, data->len, DMA_BIDIRECTIONAL);
-	} else {
-		struct srp_indirect_buf *indirect =
-			(struct srp_indirect_buf *) cmd->add_data;
-		int num_mapped = indirect->table_desc.len /
-			sizeof(struct srp_direct_buf);
 
-		if (num_mapped <= MAX_INDIRECT_BUFS) {
-			unmap_sg_list(num_mapped, dev, &indirect->desc_list[0]);
-			return;
-		}
-
-		unmap_sg_list(num_mapped, dev, evt_struct->ext_list);
-	}
+	if (evt_struct->cmnd)
+		scsi_dma_unmap(evt_struct->cmnd);
 }
 
 static int map_sg_list(struct scsi_cmnd *cmd, int nseg,
-- 
cgit v1.2.3-18-g5258


From 490475a9938f3480e1ab3a67063e547cea41c295 Mon Sep 17 00:00:00 2001
From: Anil Veerabhadrappa <anilgv@broadcom.com>
Date: Thu, 8 Apr 2010 15:59:15 -0700
Subject: [SCSI] bnx2i: Bug fixes related to MTU change issue when there are
 active iscsi sessions

bnx2i driver has to wait and cleanup all iscsi endpoints before
returning from bnx2i_stop(). This is to make sure all chip resources
are freed before chip is reset.

As the requirements for 1G and 10G chipsets is different, added
per-device 'hba_shutdown_tmo' parameter to adapter structure

If the connections are not torn down by the daemon within this timeout
period, 'cid's will be leaked in 10G device. 1G devices are more
flexible and do not leak any resources because the whole chip ports
gets reset when MTU is changed or ethtool selftest is run

fixed a minor issue in bnx2i_ep_poll() which unnecessarily forced
error return code when driver timed out waiting for TCP connect
request to complete

Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/bnx2i/bnx2i.h       |  2 ++
 drivers/scsi/bnx2i/bnx2i_init.c  | 13 ++++++++++++-
 drivers/scsi/bnx2i/bnx2i_iscsi.c | 13 ++++++++++---
 3 files changed, 24 insertions(+), 4 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 6cf9dc37d78..6b624e767d3 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -362,6 +362,7 @@ struct bnx2i_hba {
 	u32 num_ccell;
 
 	int ofld_conns_active;
+	wait_queue_head_t eh_wait;
 
 	int max_active_conns;
 	struct iscsi_cid_queue cid_que;
@@ -381,6 +382,7 @@ struct bnx2i_hba {
 	spinlock_t lock;	/* protects hba structure access */
 	struct mutex net_dev_lock;/* sync net device access */
 
+	int hba_shutdown_tmo;
 	/*
 	 * PCI related info.
 	 */
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index 6d8172e781c..5d9296c599f 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -177,11 +177,22 @@ void bnx2i_stop(void *handle)
 	struct bnx2i_hba *hba = handle;
 
 	/* check if cleanup happened in GOING_DOWN context */
-	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
 	if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
 				&hba->adapter_state))
 		iscsi_host_for_each_session(hba->shost,
 					    bnx2i_drop_session);
+
+	/* Wait for all endpoints to be torn down, Chip will be reset once
+	 *  control returns to network driver. So it is required to cleanup and
+	 * release all connection resources before returning from this routine.
+	 */
+	wait_event_interruptible_timeout(hba->eh_wait,
+					 (hba->ofld_conns_active == 0),
+					 hba->hba_shutdown_tmo);
+	/* This flag should be cleared last so that ep_disconnect() gracefully
+	 * cleans up connection context
+	 */
+	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
 }
 
 /**
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index f2e9b18fe76..fa68ab34b99 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -820,6 +820,11 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
 
 	spin_lock_init(&hba->lock);
 	mutex_init(&hba->net_dev_lock);
+	init_waitqueue_head(&hba->eh_wait);
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		hba->hba_shutdown_tmo = 240 * HZ;
+	else	/* 5706/5708/5709 */
+		hba->hba_shutdown_tmo = 30 * HZ;
 
 	if (iscsi_host_add(shost, &hba->pcidev->dev))
 		goto free_dump_mem;
@@ -1658,8 +1663,8 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 		 */
 		hba = bnx2i_check_route(dst_addr);
 
-	if (!hba) {
-		rc = -ENOMEM;
+	if (!hba || test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state)) {
+		rc = -EINVAL;
 		goto check_busy;
 	}
 
@@ -1804,7 +1809,7 @@ static int bnx2i_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
 					       (bnx2i_ep->state ==
 						EP_STATE_CONNECT_COMPL)),
 					      msecs_to_jiffies(timeout_ms));
-	if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+	if (bnx2i_ep->state == EP_STATE_OFLD_FAILED)
 		rc = -1;
 
 	if (rc > 0)
@@ -1957,6 +1962,8 @@ return_bnx2i_ep:
 
 	if (!hba->ofld_conns_active)
 		bnx2i_unreg_dev_all();
+
+	wake_up_interruptible(&hba->eh_wait);
 }
 
 
-- 
cgit v1.2.3-18-g5258


From 1482338f6242dbaea46039c5f1b4604a472b364b Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 22 Apr 2010 11:02:14 -0700
Subject: scsi: fix operator precedence warning

Fix operator precedence warning (from sparse), which results in the
data value always being 0:

drivers/scsi/qla4xxx/ql4_mbx.c:470:66: warning: right shift by bigger than source value

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Ravi Anand <ravi.anand@qlogic.com>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Cc: Karen Higgins <karen.higgins@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/scsi/qla4xxx/ql4_mbx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 09d6d4b76f3..caeb7d10ae0 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -467,7 +467,7 @@ int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
 	if (conn_err_detail)
 		*conn_err_detail = mbox_sts[5];
 	if (tcp_source_port_num)
-		*tcp_source_port_num = (uint16_t) mbox_sts[6] >> 16;
+		*tcp_source_port_num = (uint16_t) (mbox_sts[6] >> 16);
 	if (connection_id)
 		*connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
 	status = QLA_SUCCESS;
-- 
cgit v1.2.3-18-g5258