From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/sata_via.c | 387 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 387 insertions(+) create mode 100644 drivers/scsi/sata_via.c (limited to 'drivers/scsi/sata_via.c') diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c new file mode 100644 index 00000000000..3a783066727 --- /dev/null +++ b/drivers/scsi/sata_via.c @@ -0,0 +1,387 @@ +/* + sata_via.c - VIA Serial ATA controllers + + Maintained by: Jeff Garzik + Please ALWAYS copy linux-ide@vger.kernel.org + on emails. + + Copyright 2003-2004 Red Hat, Inc. All rights reserved. + Copyright 2003-2004 Jeff Garzik + + The contents of this file are subject to the Open + Software License version 1.1 that can be found at + http://www.opensource.org/licenses/osl-1.1.txt and is included herein + by reference. + + Alternatively, the contents of this file may be used under the terms + of the GNU General Public License version 2 (the "GPL") as distributed + in the kernel source COPYING file, in which case the provisions of + the GPL are applicable instead of the above. If you wish to allow + the use of your version of this file only under the terms of the + GPL and not to allow others to use your version of this file under + the OSL, indicate your decision by deleting the provisions above and + replace them with the notice and other provisions required by the GPL. + If you do not delete the provisions above, a recipient may use your + version of this file under either the OSL or the GPL. + + ---------------------------------------------------------------------- + + To-do list: + * VT6421 PATA support + + */ + +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include +#include + +#define DRV_NAME "sata_via" +#define DRV_VERSION "1.1" + +enum board_ids_enum { + vt6420, + vt6421, +}; + +enum { + SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ + SATA_INT_GATE = 0x41, /* SATA interrupt gating */ + SATA_NATIVE_MODE = 0x42, /* Native mode enable */ + SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */ + + PORT0 = (1 << 1), + PORT1 = (1 << 0), + ALL_PORTS = PORT0 | PORT1, + N_PORTS = 2, + + NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), + + SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ + SATA_2DEV = (1 << 5), /* SATA is master/slave */ +}; + +static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); + +static struct pci_device_id svia_pci_tbl[] = { + { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, + { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 }, + + { } /* terminate list */ +}; + +static struct pci_driver svia_pci_driver = { + .name = DRV_NAME, + .id_table = svia_pci_tbl, + .probe = svia_init_one, + .remove = ata_pci_remove_one, +}; + +static Scsi_Host_Template svia_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, +}; + +static struct ata_port_operations svia_sata_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = sata_phy_reset, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .scr_read = svia_scr_read, + .scr_write = svia_scr_write, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, +}; + +static struct ata_port_info svia_port_info = { + .sht = &svia_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &svia_sata_ops, +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, svia_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + return inl(ap->ioaddr.scr_addr + (4 * sc_reg)); +} + +static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return; + outl(val, ap->ioaddr.scr_addr + (4 * sc_reg)); +} + +static const unsigned int svia_bar_sizes[] = { + 8, 4, 8, 4, 16, 256 +}; + +static const unsigned int vt6421_bar_sizes[] = { + 16, 16, 16, 16, 32, 128 +}; + +static unsigned long svia_scr_addr(unsigned long addr, unsigned int port) +{ + return addr + (port * 128); +} + +static unsigned long vt6421_scr_addr(unsigned long addr, unsigned int port) +{ + return addr + (port * 64); +} + +static void vt6421_init_addrs(struct ata_probe_ent *probe_ent, + struct pci_dev *pdev, + unsigned int port) +{ + unsigned long reg_addr = pci_resource_start(pdev, port); + unsigned long bmdma_addr = pci_resource_start(pdev, 4) + (port * 8); + unsigned long scr_addr; + + probe_ent->port[port].cmd_addr = reg_addr; + probe_ent->port[port].altstatus_addr = + probe_ent->port[port].ctl_addr = (reg_addr + 8) | ATA_PCI_CTL_OFS; + probe_ent->port[port].bmdma_addr = bmdma_addr; + + scr_addr = vt6421_scr_addr(pci_resource_start(pdev, 5), port); + probe_ent->port[port].scr_addr = scr_addr; + + ata_std_ports(&probe_ent->port[port]); +} + +static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) +{ + struct ata_probe_ent *probe_ent; + struct ata_port_info *ppi = &svia_port_info; + + probe_ent = ata_pci_init_native_mode(pdev, &ppi); + if (!probe_ent) + return NULL; + + probe_ent->port[0].scr_addr = + svia_scr_addr(pci_resource_start(pdev, 5), 0); + probe_ent->port[1].scr_addr = + svia_scr_addr(pci_resource_start(pdev, 5), 1); + + return probe_ent; +} + +static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) +{ + struct ata_probe_ent *probe_ent; + unsigned int i; + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) + return NULL; + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = &svia_sht; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | + ATA_FLAG_NO_LEGACY; + probe_ent->port_ops = &svia_sata_ops; + probe_ent->n_ports = N_PORTS; + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->pio_mask = 0x1f; + probe_ent->mwdma_mask = 0x07; + probe_ent->udma_mask = 0x7f; + + for (i = 0; i < N_PORTS; i++) + vt6421_init_addrs(probe_ent, pdev, i); + + return probe_ent; +} + +static void svia_configure(struct pci_dev *pdev) +{ + u8 tmp8; + + pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); + printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n", + pci_name(pdev), + (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); + + /* make sure SATA channels are enabled */ + pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n", + pci_name(pdev), (int) tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); + } + + /* make sure interrupts for each channel sent to us */ + pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n", + pci_name(pdev), (int) tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); + } + + /* make sure native mode is enabled */ + pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); + if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { + printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n", + pci_name(pdev), (int) tmp8); + tmp8 |= NATIVE_MODE_ALL; + pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); + } +} + +static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + unsigned int i; + int rc; + struct ata_probe_ent *probe_ent; + int board_id = (int) ent->driver_data; + const int *bar_sizes; + int pci_dev_busy = 0; + u8 tmp8; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + if (board_id == vt6420) { + pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); + if (tmp8 & SATA_2DEV) { + printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n", + pci_name(pdev), (int) tmp8); + rc = -EIO; + goto err_out_regions; + } + + bar_sizes = &svia_bar_sizes[0]; + } else { + bar_sizes = &vt6421_bar_sizes[0]; + } + + for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) + if ((pci_resource_start(pdev, i) == 0) || + (pci_resource_len(pdev, i) < bar_sizes[i])) { + printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n", + pci_name(pdev), i, + pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); + rc = -ENODEV; + goto err_out_regions; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + if (board_id == vt6420) + probe_ent = vt6420_init_probe_ent(pdev); + else + probe_ent = vt6421_init_probe_ent(pdev); + + if (!probe_ent) { + printk(KERN_ERR DRV_NAME "(%s): out of memory\n", + pci_name(pdev)); + rc = -ENOMEM; + goto err_out_regions; + } + + svia_configure(pdev); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + +static int __init svia_init(void) +{ + return pci_module_init(&svia_pci_driver); +} + +static void __exit svia_exit(void) +{ + pci_unregister_driver(&svia_pci_driver); +} + +module_init(svia_init); +module_exit(svia_exit); + -- cgit v1.2.3-18-g5258