From 8db98440facad7e3a194f21ce6069e04bff336c6 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 19 Jul 2012 15:10:31 +0800 Subject: regulator: mc13892: Simplify implementation of mc13892_sw_regulator_set_voltage_sel() Use mc13xxx_reg_rmw rather than a mc13xxx_reg_read and a mc13xxx_reg_write calls. This logic to set MC13892_SWITCHERS0_SWxHI bit is pretty simple: if (volt > 1375000) set MC13892_SWITCHERS0_SWxHI bit else if (volt < 1100000) clear MC13892_SWITCHERS0_SWxHI bit else leave MC13892_SWITCHERS0_SWxHI bit untouched We already know the selector, so we don't need to calculate the selector again. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/mc13892-regulator.c | 42 +++++++++++++---------------------- 1 file changed, 15 insertions(+), 27 deletions(-) (limited to 'drivers/regulator/mc13892-regulator.c') diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index 9d4296b96ad..5d1d487c47a 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -426,37 +426,25 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); - int hi, value, mask, id = rdev_get_id(rdev); - u32 valread; + int volt, mask, id = rdev_get_id(rdev); + u32 reg_value; int ret; - value = rdev->desc->volt_table[selector]; + volt = rdev->desc->volt_table[selector]; + mask = mc13892_regulators[id].vsel_mask; + reg_value = selector << mc13892_regulators[id].vsel_shift; - mc13xxx_lock(priv->mc13xxx); - ret = mc13xxx_reg_read(priv->mc13xxx, - mc13892_regulators[id].vsel_reg, &valread); - if (ret) - goto err; + if (volt > 1375000) { + mask |= MC13892_SWITCHERS0_SWxHI; + reg_value |= MC13892_SWITCHERS0_SWxHI; + } else if (volt < 1100000) { + mask |= MC13892_SWITCHERS0_SWxHI; + reg_value &= ~MC13892_SWITCHERS0_SWxHI; + } - if (value > 1375000) - hi = 1; - else if (value < 1100000) - hi = 0; - else - hi = valread & MC13892_SWITCHERS0_SWxHI; - - if (hi) { - value = (value - 1100000) / 25000; - value |= MC13892_SWITCHERS0_SWxHI; - } else - value = (value - 600000) / 25000; - - mask = mc13892_regulators[id].vsel_mask | MC13892_SWITCHERS0_SWxHI; - valread = (valread & ~mask) | - (value << mc13892_regulators[id].vsel_shift); - ret = mc13xxx_reg_write(priv->mc13xxx, mc13892_regulators[id].vsel_reg, - valread); -err: + mc13xxx_lock(priv->mc13xxx); + ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask, + reg_value); mc13xxx_unlock(priv->mc13xxx); return ret; -- cgit v1.2.3-18-g5258