From 0e875f4905817c03ba49447b49af093552e66e95 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Sun, 10 Jan 2010 20:49:26 +0100 Subject: asus-laptop: add wireless and bluetooth status parameter These to parameter allow to set the status of wlan and bluetooth device when the module load. On some models, the device will always be down on boot, so the default behavior is to always enable these devices. Signed-off-by: Corentin Chary --- drivers/platform/x86/asus-laptop.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers/platform/x86/asus-laptop.c') diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 61a1c750365..1d799b3fc4e 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -113,6 +113,19 @@ static uint wapf = 1; module_param(wapf, uint, 0644); MODULE_PARM_DESC(wapf, "WAPF value"); +static uint wireless_status = 1; +static uint bluetooth_status = 1; + +module_param(wireless_status, uint, 0644); +MODULE_PARM_DESC(wireless_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is 1"); + +module_param(bluetooth_status, uint, 0644); +MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is 1"); + #define ASUS_HANDLE(object, paths...) \ static acpi_handle object##_handle = NULL; \ static char *object##_paths[] = { paths } @@ -1272,8 +1285,10 @@ static int asus_hotk_add(struct acpi_device *device) asus_hotk_found = 1; /* WLED and BLED are on by default */ - write_status(bt_switch_handle, 1, BT_ON); - write_status(wl_switch_handle, 1, WL_ON); + if (bluetooth_status != -1) + write_status(bt_switch_handle, !!bluetooth_status, BT_ON); + if (wireless_status != -1) + write_status(wl_switch_handle, !!wireless_status, WL_ON); /* If the h/w switch is off, we need to check the real status */ write_status(NULL, read_status(BT_ON), BT_ON); -- cgit v1.2.3-18-g5258