From 16a74744231e57e354253567490ab9e4ccd2d605 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Apr 2006 08:47:00 -0400 Subject: PCI: quirk to disable e100 interrupt if RESET failed to Without this quirk, e100 can be pulling on a shared interrupt line when another device (eg. USB) loads, causing the interrupt to scream and get disabled. http://bugzilla.kernel.org/show_bug.cgi?id=5918 Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/pci/quirks.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e3c78c39b7e..5ca1e94887b 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1511,6 +1511,63 @@ static void __devinit quirk_netmos(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); +static void __devinit quirk_e100_interrupt(struct pci_dev *dev) +{ + u16 command; + u32 bar; + u8 __iomem *csr; + u8 cmd_hi; + + switch (dev->device) { + /* PCI IDs taken from drivers/net/e100.c */ + case 0x1029: + case 0x1030 ... 0x1034: + case 0x1038 ... 0x103E: + case 0x1050 ... 0x1057: + case 0x1059: + case 0x1064 ... 0x106B: + case 0x1091 ... 0x1095: + case 0x1209: + case 0x1229: + case 0x2449: + case 0x2459: + case 0x245D: + case 0x27DC: + break; + default: + return; + } + + /* + * Some firmware hands off the e100 with interrupts enabled, + * which can cause a flood of interrupts if packets are + * received before the driver attaches to the device. So + * disable all e100 interrupts here. The driver will + * re-enable them when it's ready. + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar); + + if (!(command & PCI_COMMAND_MEMORY) || !bar) + return; + + csr = ioremap(bar, 8); + if (!csr) { + printk(KERN_WARNING "PCI: Can't map %s e100 registers\n", + pci_name(dev)); + return; + } + + cmd_hi = readb(csr + 3); + if (cmd_hi == 0) { + printk(KERN_WARNING "PCI: Firmware left %s e100 interrupts " + "enabled, disabling\n", pci_name(dev)); + writeb(1, csr + 3); + } + + iounmap(csr); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); static void __devinit fixup_rev1_53c810(struct pci_dev* dev) { -- cgit v1.2.3-18-g5258 From b5240b32b9b2b75917c478d768191862a2b190cc Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Wed, 26 Jul 2006 13:32:00 -0400 Subject: ACPIPHP: allow acpiphp to build without ACPI_DOCK Change the build options for acpiphp so that it may build without being dependent on the ACPI_DOCK option, but yet does not allow the option of acpiphp being built-in when dock is built as a module. This does not change the previous patch for ACPI_IBM_DOCK Kconfig. For the following matrix of config options, I built an i386 kernel. Dock acpiphp should it build? confirmed y y y y y n y y y m y y m y no - acpiphp should acpiphp was convert to m converted to m m n y y m m y y n y y y n n y y n m y y Signed-off-by: Anil S Keshavamurthy Signed-off-by: Kristen Carlson Accardi Signed-off-by: Len Brown --- drivers/pci/hotplug/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 3fae77ffb2f..1c363d81427 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -76,7 +76,7 @@ config HOTPLUG_PCI_IBM config HOTPLUG_PCI_ACPI tristate "ACPI PCI Hotplug driver" - depends on ACPI_DOCK && HOTPLUG_PCI + depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI) help Say Y here if you have a system that supports PCI Hotplug using ACPI. -- cgit v1.2.3-18-g5258