From f02cbbe657939489347cbda598401a56913ffcbd Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Tue, 2 Nov 2010 12:05:10 -0400 Subject: pci root complex: support for tile architecture This change enables PCI root complex support for TILEPro. Unlike TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI support consists of hypervisor upcalls for PIO, DMA, etc. However, the performance is fine for the devices we have tested with so far (1Gb Ethernet, SATA, etc.). The header was tweaked to be a little bit more aggressive about disabling attempts to map/unmap IO port space. The hacky header was rolled into the header and the result was simplified. Both of the latter two headers were preliminary versions not meant for release before now - oh well. There is one quirk for our TILEmpower platform, which accidentally negotiates up to 5GT and needs to be kicked down to 2.5GT. Signed-off-by: Chris Metcalf --- drivers/pci/Makefile | 1 + drivers/pci/quirks.c | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index f01e344cf4b..98e6fdf34d3 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o obj-$(CONFIG_MICROBLAZE) += setup-bus.o +obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o # # ACPI Related PCI FW Functions diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f5c63fe9db5..6f9350cabbd 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, quirk_unhide_mch_dev6); +#ifdef CONFIG_TILE +/* + * The Tilera TILEmpower platform needs to set the link speed + * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed + * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe + * capability register of the PEX8624 PCIe switch. The switch + * supports link speed auto negotiation, but falsely sets + * the link speed to 5GT/s. + */ +static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev) +{ + if (tile_plx_gen1) { + pci_write_config_dword(dev, 0x98, 0x1); + mdelay(50); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); +#endif /* CONFIG_TILE */ #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting -- cgit v1.2.3-18-g5258