From cf35e4ad57b4c39a4c74921e20e48ec0dbeb14f4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 01:02:06 +0300 Subject: PCI: remove CVS keywords This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e4548ab2a93..15beaf48407 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1,6 +1,4 @@ /* - * $Id: pci.c,v 1.91 1999/01/21 13:34:01 davem Exp $ - * * PCI Bus Services, see include/linux/pci.h for further explanation. * * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter, -- cgit v1.2.3-18-g5258 From 8d2bdf49481b27096e242119e73abe9348c1019b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 5 Jun 2008 01:16:37 +0200 Subject: PCI ACPI: Drop the second argument of platform_pci_choose_state Since the second argument of acpi_pci_choose_state() and platform_pci_choose_state() is never used, remove it. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Len Brown --- drivers/pci/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e4548ab2a93..75c60239cad 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -508,7 +508,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } -pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); +pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); /** * pci_choose_state - Choose the power state of a PCI device @@ -528,7 +528,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) return PCI_D0; if (platform_pci_choose_state) { - ret = platform_pci_choose_state(dev, state); + ret = platform_pci_choose_state(dev); if (ret != PCI_POWER_ERROR) return ret; } -- cgit v1.2.3-18-g5258 From 80ccba1186d48fa728dc4b1456cc07ffb07da501 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 13 Jun 2008 10:52:11 -0600 Subject: PCI: use dev_printk when possible Convert printks to use dev_printk(). I converted pr_debug() to dev_dbg(). Both use KERN_DEBUG and are enabled only when DEBUG is defined. I converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(), because dev_dbg() is only enabled when DEBUG is defined. I converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info(). The DBG() name makes it sound like debug, but it's been enabled forever, so dev_info() preserves the previous behavior. I tried to make the resource assignment formats more consistent, e.g., "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\n" instead of sometimes using "start-end" and sometimes using "size@start". I'm not attached to one or the other; I'd just like them consistent. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 40 ++++++++++++++++++---------------------- 1 file changed, 18 insertions(+), 22 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 7869f8f75c9..8b755a7fb4e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -422,8 +422,8 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) * to sleep if we're already in a low power state */ if (state != PCI_D0 && dev->current_state > state) { - printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n", - __func__, pci_name(dev), state, dev->current_state); + dev_err(&dev->dev, "invalid power transition " + "(from state %d to %d)\n", dev->current_state, state); return -EINVAL; } else if (dev->current_state == state) return 0; /* we're already there */ @@ -431,9 +431,8 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc); if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { - printk(KERN_DEBUG - "PCI: %s has unsupported PM cap regs version (%u)\n", - pci_name(dev), pmc & PCI_PM_CAP_VER_MASK); + dev_printk(KERN_DEBUG, &dev->dev, "unsupported PM cap regs " + "version (%u)\n", pmc & PCI_PM_CAP_VER_MASK); return -EIO; } @@ -541,7 +540,8 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) case PM_EVENT_HIBERNATE: return PCI_D3hot; default: - printk("Unrecognized suspend event %d\n", state.event); + dev_info(&dev->dev, "unrecognized suspend event %d\n", + state.event); BUG(); } return PCI_D0; @@ -566,7 +566,7 @@ static int pci_save_pcie_state(struct pci_dev *dev) else found = 1; if (!save_state) { - dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n"); + dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n"); return -ENOMEM; } cap = (u16 *)&save_state->data[0]; @@ -617,7 +617,7 @@ static int pci_save_pcix_state(struct pci_dev *dev) else found = 1; if (!save_state) { - dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n"); + dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n"); return -ENOMEM; } cap = (u16 *)&save_state->data[0]; @@ -683,10 +683,9 @@ pci_restore_state(struct pci_dev *dev) for (i = 15; i >= 0; i--) { pci_read_config_dword(dev, i * 4, &val); if (val != dev->saved_config_space[i]) { - printk(KERN_DEBUG "PM: Writing back config space on " - "device %s at offset %x (was %x, writing %x)\n", - pci_name(dev), i, - val, (int)dev->saved_config_space[i]); + dev_printk(KERN_DEBUG, &dev->dev, "restoring config " + "space at offset %#x (was %#x, writing %#x)\n", + i, val, (int)dev->saved_config_space[i]); pci_write_config_dword(dev,i * 4, dev->saved_config_space[i]); } @@ -1114,13 +1113,11 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name) return 0; err_out: - printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%llx@%llx " - "for device %s\n", - pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", + dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n", bar + 1, /* PCI BAR # */ - (unsigned long long)pci_resource_len(pdev, bar), + pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", (unsigned long long)pci_resource_start(pdev, bar), - pci_name(pdev)); + (unsigned long long)pci_resource_end(pdev, bar)); return -EBUSY; } @@ -1212,7 +1209,7 @@ pci_set_master(struct pci_dev *dev) pci_read_config_word(dev, PCI_COMMAND, &cmd); if (! (cmd & PCI_COMMAND_MASTER)) { - pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev)); + dev_dbg(&dev->dev, "enabling bus mastering\n"); cmd |= PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, cmd); } @@ -1277,8 +1274,8 @@ pci_set_cacheline_size(struct pci_dev *dev) if (cacheline_size == pci_cache_line_size) return 0; - printk(KERN_DEBUG "PCI: cache line size of %d is not supported " - "by device %s\n", pci_cache_line_size << 2, pci_name(dev)); + dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not " + "supported\n", pci_cache_line_size << 2); return -EINVAL; } @@ -1303,8 +1300,7 @@ pci_set_mwi(struct pci_dev *dev) pci_read_config_word(dev, PCI_COMMAND, &cmd); if (! (cmd & PCI_COMMAND_INVALIDATE)) { - pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", - pci_name(dev)); + dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n"); cmd |= PCI_COMMAND_INVALIDATE; pci_write_config_word(dev, PCI_COMMAND, cmd); } -- cgit v1.2.3-18-g5258 From e4ec7a00ed30429030112e5591cf3138645727c2 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 25 Jun 2008 16:12:25 -0700 Subject: PCI: correct resource number in debug output If pci_request_region fails, make the warning include the resource number, not the resource number + 1. --- drivers/pci/pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8b755a7fb4e..8e8ecc1da93 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1114,10 +1114,10 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name) err_out: dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n", - bar + 1, /* PCI BAR # */ - pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", - (unsigned long long)pci_resource_start(pdev, bar), - (unsigned long long)pci_resource_end(pdev, bar)); + bar, + pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", + (unsigned long long)pci_resource_start(pdev, bar), + (unsigned long long)pci_resource_end(pdev, bar)); return -EBUSY; } -- cgit v1.2.3-18-g5258 From 961d9120fa6f078492a1c762dd91f2c097e56c83 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:32:02 +0200 Subject: PCI: Introduce platform_pci_power_manageable function Introduce function pointer platform_pci_power_manageable to be used by the platform-related code to point to a function allowing us to check if given device is power manageable by the platform. Introduce acpi_pci_power_manageable() playing that role for ACPI. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8e8ecc1da93..f8074525267 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -376,7 +376,32 @@ pci_restore_bars(struct pci_dev *dev) pci_update_resource(dev, &dev->resource[i], i); } -int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); +static struct pci_platform_pm_ops *pci_platform_pm; + +int pci_set_platform_pm(struct pci_platform_pm_ops *ops) +{ + if (!ops->is_manageable || !ops->set_state || !ops->choose_state) + return -EINVAL; + pci_platform_pm = ops; + return 0; +} + +static inline bool platform_pci_power_manageable(struct pci_dev *dev) +{ + return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false; +} + +static inline int platform_pci_set_power_state(struct pci_dev *dev, + pci_power_t t) +{ + return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS; +} + +static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) +{ + return pci_platform_pm ? + pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR; +} /** * pci_set_power_state - Set the power state of a PCI device @@ -479,8 +504,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) * Give firmware a chance to be called, such as ACPI _PRx, _PSx * Firmware method after native method ? */ - if (platform_pci_set_power_state) - platform_pci_set_power_state(dev, state); + platform_pci_set_power_state(dev, state); dev->current_state = state; @@ -505,8 +529,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } -pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); - /** * pci_choose_state - Choose the power state of a PCI device * @dev: PCI device to be suspended @@ -524,11 +546,9 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) if (!pci_find_capability(dev, PCI_CAP_ID_PM)) return PCI_D0; - if (platform_pci_choose_state) { - ret = platform_pci_choose_state(dev); - if (ret != PCI_POWER_ERROR) - return ret; - } + ret = platform_pci_choose_state(dev); + if (ret != PCI_POWER_ERROR) + return ret; switch (state.event) { case PM_EVENT_ON: -- cgit v1.2.3-18-g5258 From 44e4e66eeae5338b3ca0b28f8352e60bf18d5ba8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:32:52 +0200 Subject: PCI: rework pci_set_power_state function to call platform first Rework pci_set_power_state() so that the platform callback is invoked before the native mechanism, if necessary. Also, make the function check if the device is power manageable by the platform before invoking the platform callback. This may matter if the device dependent on additional power resources controlled by the platform is being put into D0, in which case those power resources must be turned on before we attempt to handle the device itself. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 150 +++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 104 insertions(+), 46 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f8074525267..20e28077b96 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -404,67 +404,56 @@ static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) } /** - * pci_set_power_state - Set the power state of a PCI device - * @dev: PCI device to be suspended - * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering + * pci_raw_set_power_state - Use PCI PM registers to set the power state of + * given PCI device + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. * - * Transition a device to a new power state, using the Power Management - * Capabilities in the device's config space. - * - * RETURN VALUE: - * -EINVAL if trying to enter a lower state than we're already in. - * 0 if we're already in the requested state. - * -EIO if device does not support PCI PM. - * 0 if we can successfully change the power state. + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if device already is in the requested state. + * 0 if device's power state has been successfully changed. */ -int -pci_set_power_state(struct pci_dev *dev, pci_power_t state) +static int +pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) { - int pm, need_restore = 0; u16 pmcsr, pmc; + bool need_restore = false; - /* bound the state we're entering */ - if (state > PCI_D3hot) - state = PCI_D3hot; - - /* - * If the device or the parent bridge can't support PCI PM, ignore - * the request if we're doing anything besides putting it into D0 - * (which would only happen on boot). - */ - if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) - return 0; - - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - - /* abort if the device doesn't support PM capabilities */ if (!pm) return -EIO; + if (state < PCI_D0 || state > PCI_D3hot) + return -EINVAL; + /* Validate current state: * Can enter D0 from any state, but if we can only go deeper * to sleep if we're already in a low power state */ - if (state != PCI_D0 && dev->current_state > state) { + if (dev->current_state == state) { + /* we're already there */ + return 0; + } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold + && dev->current_state > state) { dev_err(&dev->dev, "invalid power transition " "(from state %d to %d)\n", dev->current_state, state); return -EINVAL; - } else if (dev->current_state == state) - return 0; /* we're already there */ + } + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc); if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { - dev_printk(KERN_DEBUG, &dev->dev, "unsupported PM cap regs " - "version (%u)\n", pmc & PCI_PM_CAP_VER_MASK); + dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", + pmc & PCI_PM_CAP_VER_MASK); return -EIO; } /* check if this device supports the desired state */ - if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) - return -EIO; - else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2)) + if ((state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) + || (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))) return -EIO; pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); @@ -483,7 +472,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) - need_restore = 1; + need_restore = true; /* Fall-through: force to D0 */ default: pmcsr = 0; @@ -500,12 +489,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(200); - /* - * Give firmware a chance to be called, such as ACPI _PRx, _PSx - * Firmware method after native method ? - */ - platform_pci_set_power_state(dev, state); - dev->current_state = state; /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT @@ -529,6 +512,81 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } +/** + * pci_update_current_state - Read PCI power state of given device from its + * PCI PM registers and cache it + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + */ +static void pci_update_current_state(struct pci_dev *dev, int pm) +{ + if (pm) { + u16 pmcsr; + + pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + } +} + +/** + * pci_set_power_state - Set the power state of a PCI device + * @dev: PCI device to handle. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * + * Transition a device to a new power state, using the platform formware and/or + * the device's PCI PM registers. + * + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if device already is in the requested state. + * 0 if device's power state has been successfully changed. + */ +int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +{ + int pm, error; + + /* bound the state we're entering */ + if (state > PCI_D3hot) + state = PCI_D3hot; + else if (state < PCI_D0) + state = PCI_D0; + else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) + /* + * If the device or the parent bridge do not support PCI PM, + * ignore the request if we're doing anything other than putting + * it into D0 (which would only happen on boot). + */ + return 0; + + /* Find PCI PM capability in the list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + + if (state == PCI_D0 && platform_pci_power_manageable(dev)) { + /* + * Allow the platform to change the state, for example via ACPI + * _PR0, _PS0 and some such, but do not trust it. + */ + int ret = platform_pci_set_power_state(dev, PCI_D0); + if (!ret) + pci_update_current_state(dev, pm); + } + + error = pci_raw_set_power_state(dev, pm, state); + + if (state > PCI_D0 && platform_pci_power_manageable(dev)) { + /* Allow the platform to finalize the transition */ + int ret = platform_pci_set_power_state(dev, state); + if (!ret) { + pci_update_current_state(dev, pm); + error = 0; + } + } + + return error; +} + /** * pci_choose_state - Choose the power state of a PCI device * @dev: PCI device to be suspended -- cgit v1.2.3-18-g5258 From eb9d0fe40e313c0a74115ef456a2e43a6c8da72f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:34:48 +0200 Subject: PCI ACPI: Rework PCI handling of wake-up * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 169 +++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 124 insertions(+), 45 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 20e28077b96..a6b1b6f96ab 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -380,7 +380,8 @@ static struct pci_platform_pm_ops *pci_platform_pm; int pci_set_platform_pm(struct pci_platform_pm_ops *ops) { - if (!ops->is_manageable || !ops->set_state || !ops->choose_state) + if (!ops->is_manageable || !ops->set_state || !ops->choose_state + || !ops->sleep_wake || !ops->can_wakeup) return -EINVAL; pci_platform_pm = ops; return 0; @@ -403,6 +404,17 @@ static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR; } +static inline bool platform_pci_can_wakeup(struct pci_dev *dev) +{ + return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false; +} + +static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) +{ + return pci_platform_pm ? + pci_platform_pm->sleep_wake(dev, enable) : -ENODEV; +} + /** * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device @@ -1035,6 +1047,56 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) return pcibios_set_pcie_reset_state(dev, state); } +/** + * pci_pme_capable - check the capability of PCI device to generate PME# + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @state: PCI state from which device will issue PME#. + */ +static bool pci_pme_capable(struct pci_dev *dev, int pm, pci_power_t state) +{ + u16 pmc; + + if (!pm) + return false; + + /* Check device's ability to generate PME# from given state */ + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); + + pmc &= PCI_PM_CAP_PME_MASK; + pmc >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ + + return !!(pmc & (1 << state)); +} + +/** + * pci_pme_active - enable or disable PCI device's PME# function + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @enable: 'true' to enable PME# generation; 'false' to disable it. + * + * The caller must verify that the device is capable of generating PME# before + * calling this function with @enable equal to 'true'. + */ +static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) +{ + u16 pmcsr; + + if (!pm) + return; + + pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + /* Clear PME_Status by writing 1 to it and enable PME# */ + pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; + if (!enable) + pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; + + pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + + dev_printk(KERN_INFO, &dev->dev, "PME# %s\n", + enable ? "enabled" : "disabled"); +} + /** * pci_enable_wake - enable PCI device as wakeup event source * @dev: PCI device affected @@ -1046,66 +1108,83 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) * called automatically by this routine. * * Devices with legacy power management (no standard PCI PM capabilities) - * always require such platform hooks. Depending on the platform, devices - * supporting the standard PCI PME# signal may require such platform hooks; - * they always update bits in config space to allow PME# generation. + * always require such platform hooks. * - * -EIO is returned if the device can't ever be a wakeup event source. - * -EINVAL is returned if the device can't generate wakeup events from - * the specified PCI state. Returns zero if the operation is successful. + * RETURN VALUE: + * 0 is returned on success + * -EINVAL is returned if device is not supposed to wake up the system + * Error code depending on the platform is returned if both the platform and + * the native mechanism fail to enable the generation of wake-up events */ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { int pm; - int status; - u16 value; - - /* Note that drivers should verify device_may_wakeup(&dev->dev) - * before calling this function. Platform code should report - * errors when drivers try to enable wakeup on devices that - * can't issue wakeups, or on which wakeups were disabled by - * userspace updating the /sys/devices.../power/wakeup file. - */ + int error = 0; + bool pme_done = false; - status = call_platform_enable_wakeup(&dev->dev, enable); - - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!device_may_wakeup(&dev->dev)) + return -EINVAL; - /* If device doesn't support PM Capabilities, but caller wants to - * disable wake events, it's a NOP. Otherwise fail unless the - * platform hooks handled this legacy device already. + /* + * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don + * Anderson we should be doing PME# wake enable followed by ACPI wake + * enable. To disable wake-up we call the platform first, for symmetry. */ - if (!pm) - return enable ? status : 0; - /* Check device's ability to generate PME# */ - pci_read_config_word(dev,pm+PCI_PM_PMC,&value); + if (!enable && platform_pci_can_wakeup(dev)) + error = platform_pci_sleep_wake(dev, false); - value &= PCI_PM_CAP_PME_MASK; - value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ - - /* Check if it can generate PME# from requested state. */ - if (!value || !(value & (1 << state))) { - /* if it can't, revert what the platform hook changed, - * always reporting the base "EINVAL, can't PME#" error - */ - if (enable) - call_platform_enable_wakeup(&dev->dev, 0); - return enable ? -EINVAL : 0; + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!enable || pci_pme_capable(dev, pm, state)) { + pci_pme_active(dev, pm, enable); + pme_done = true; } - pci_read_config_word(dev, pm + PCI_PM_CTRL, &value); + if (enable && platform_pci_can_wakeup(dev)) + error = platform_pci_sleep_wake(dev, true); - /* Clear PME_Status by writing 1 to it and enable PME# */ - value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; + return pme_done ? 0 : error; +} - if (!enable) - value &= ~PCI_PM_CTRL_PME_ENABLE; +/** + * pci_pm_init - Initialize PM functions of given PCI device + * @dev: PCI device to handle. + */ +void pci_pm_init(struct pci_dev *dev) +{ + int pm; + u16 pmc; - pci_write_config_word(dev, pm + PCI_PM_CTRL, value); + /* find PCI PM capability in list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!pm) + return; + /* Check device's ability to generate PME# */ + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - return 0; + if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { + dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", + pmc & PCI_PM_CAP_VER_MASK); + return; + } + + if (pmc & PCI_PM_CAP_PME_MASK) { + dev_printk(KERN_INFO, &dev->dev, + "PME# supported from%s%s%s%s%s\n", + (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "", + (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "", + (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "", + (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "", + (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : ""); + /* + * Make device's PM flags reflect the wake-up capability, but + * let the user space enable it to wake up the system as needed. + */ + device_set_wakeup_capable(&dev->dev, true); + device_set_wakeup_enable(&dev->dev, false); + /* Disable the PME# generation functionality */ + pci_pme_active(dev, pm, false); + } } int -- cgit v1.2.3-18-g5258 From 404cc2d8ce41ed4031958fba8e633767e8a2e028 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:35:26 +0200 Subject: PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep Introduce functions pci_prepare_to_sleep() and pci_back_from_sleep(), to be used by the PCI drivers that want to place their devices into the lowest power state appropiate for them (PCI_D3hot, if the device is not supposed to wake up the system, or the deepest state from which the wake-up is possible, otherwise) while the system is being prepared to go into a sleeping state and to put them back into D0 during the subsequent transition to the working state. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a6b1b6f96ab..1b0ec45e993 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1146,6 +1146,87 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) return pme_done ? 0 : error; } +/** + * pci_prepare_to_sleep - prepare PCI device for system-wide transition into + * a sleep state + * @dev: Device to handle. + * + * Choose the power state appropriate for the device depending on whether + * it can wake up the system and/or is power manageable by the platform + * (PCI_D3hot is the default) and put the device into that state. + */ +int pci_prepare_to_sleep(struct pci_dev *dev) +{ + pci_power_t target_state = PCI_D3hot; + int pm = pci_find_capability(dev, PCI_CAP_ID_PM); + int error; + + if (platform_pci_power_manageable(dev)) { + /* + * Call the platform to choose the target state of the device + * and enable wake-up from this state if supported. + */ + pci_power_t state = platform_pci_choose_state(dev); + + switch (state) { + case PCI_POWER_ERROR: + case PCI_UNKNOWN: + break; + case PCI_D1: + case PCI_D2: + if (pci_no_d1d2(dev)) + break; + default: + target_state = state; + pci_enable_wake(dev, target_state, true); + } + } else if (device_may_wakeup(&dev->dev)) { + /* + * Find the deepest state from which the device can generate + * wake-up events, make it the target state and enable device + * to generate PME#. + */ + u16 pmc; + + if (!pm) + return -EIO; + + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); + if (pmc & PCI_PM_CAP_PME_MASK) { + if (!(pmc & PCI_PM_CAP_PME_D3)) { + /* Device cannot generate PME# from D3_hot */ + if (pmc & PCI_PM_CAP_PME_D2) + target_state = PCI_D2; + else if (pmc & PCI_PM_CAP_PME_D1) + target_state = PCI_D1; + else + target_state = PCI_D0; + } + pci_pme_active(dev, pm, true); + } + } + + error = pci_set_power_state(dev, target_state); + + if (error) + pci_enable_wake(dev, target_state, false); + + return error; +} + +/** + * pci_back_from_sleep - turn PCI device on during system-wide transition into + * the working state a sleep state + * @dev: Device to handle. + * + * Disable device's sytem wake-up capability and put it into D0. + */ +int pci_back_from_sleep(struct pci_dev *dev) +{ + pci_enable_wake(dev, PCI_D0, false); + return pci_set_power_state(dev, PCI_D0); +} + /** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. @@ -1853,5 +1934,7 @@ EXPORT_SYMBOL(pci_set_power_state); EXPORT_SYMBOL(pci_save_state); EXPORT_SYMBOL(pci_restore_state); EXPORT_SYMBOL(pci_enable_wake); +EXPORT_SYMBOL(pci_prepare_to_sleep); +EXPORT_SYMBOL(pci_back_from_sleep); EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); -- cgit v1.2.3-18-g5258 From 337001b6c42938f49a880b1b8306c3ed771a7e61 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:36:24 +0200 Subject: PCI: Simplify PCI device PM code If the offset of PCI device's PM capability in its configuration space, the mask of states that the device supports PME# from and the D1 and D2 support bits are cached in the corresponding struct pci_dev, the PCI device PM code can be simplified quite a bit. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 118 ++++++++++++++++++++++++------------------------------ 1 file changed, 52 insertions(+), 66 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1b0ec45e993..e632a58ba5d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -419,7 +419,6 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. * * RETURN VALUE: @@ -430,12 +429,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device's power state has been successfully changed. */ static int -pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) +pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) { - u16 pmcsr, pmc; + u16 pmcsr; bool need_restore = false; - if (!pm) + if (!dev->pm_cap) return -EIO; if (state < PCI_D0 || state > PCI_D3hot) @@ -455,20 +454,12 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) return -EINVAL; } - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - - if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { - dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", - pmc & PCI_PM_CAP_VER_MASK); - return -EIO; - } - /* check if this device supports the desired state */ - if ((state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) - || (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))) + if ((state == PCI_D1 && !dev->d1_support) + || (state == PCI_D2 && !dev->d2_support)) return -EIO; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); /* If we're (effectively) in D3, force entire word to 0. * This doesn't affect PME_Status, disables PME_En, and @@ -492,7 +483,7 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) } /* enter specified state */ - pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ @@ -528,14 +519,13 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) * pci_update_current_state - Read PCI power state of given device from its * PCI PM registers and cache it * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. */ -static void pci_update_current_state(struct pci_dev *dev, int pm) +static void pci_update_current_state(struct pci_dev *dev) { - if (pm) { + if (dev->pm_cap) { u16 pmcsr; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); } } @@ -557,7 +547,7 @@ static void pci_update_current_state(struct pci_dev *dev, int pm) */ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { - int pm, error; + int error; /* bound the state we're entering */ if (state > PCI_D3hot) @@ -572,9 +562,6 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ return 0; - /* Find PCI PM capability in the list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - if (state == PCI_D0 && platform_pci_power_manageable(dev)) { /* * Allow the platform to change the state, for example via ACPI @@ -582,16 +569,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ int ret = platform_pci_set_power_state(dev, PCI_D0); if (!ret) - pci_update_current_state(dev, pm); + pci_update_current_state(dev); } - error = pci_raw_set_power_state(dev, pm, state); + error = pci_raw_set_power_state(dev, state); if (state > PCI_D0 && platform_pci_power_manageable(dev)) { /* Allow the platform to finalize the transition */ int ret = platform_pci_set_power_state(dev, state); if (!ret) { - pci_update_current_state(dev, pm); + pci_update_current_state(dev); error = 0; } } @@ -1050,48 +1037,38 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) /** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @state: PCI state from which device will issue PME#. */ -static bool pci_pme_capable(struct pci_dev *dev, int pm, pci_power_t state) +static bool pci_pme_capable(struct pci_dev *dev, pci_power_t state) { - u16 pmc; - - if (!pm) + if (!dev->pm_cap) return false; - /* Check device's ability to generate PME# from given state */ - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - - pmc &= PCI_PM_CAP_PME_MASK; - pmc >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ - - return !!(pmc & (1 << state)); + return !!(dev->pme_support & (1 << state)); } /** * pci_pme_active - enable or disable PCI device's PME# function * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @enable: 'true' to enable PME# generation; 'false' to disable it. * * The caller must verify that the device is capable of generating PME# before * calling this function with @enable equal to 'true'. */ -static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) +static void pci_pme_active(struct pci_dev *dev, bool enable) { u16 pmcsr; - if (!pm) + if (!dev->pm_cap) return; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); /* Clear PME_Status by writing 1 to it and enable PME# */ pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; if (!enable) pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; - pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); dev_printk(KERN_INFO, &dev->dev, "PME# %s\n", enable ? "enabled" : "disabled"); @@ -1118,7 +1095,6 @@ static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) */ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { - int pm; int error = 0; bool pme_done = false; @@ -1134,9 +1110,8 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) if (!enable && platform_pci_can_wakeup(dev)) error = platform_pci_sleep_wake(dev, false); - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - if (!enable || pci_pme_capable(dev, pm, state)) { - pci_pme_active(dev, pm, enable); + if (!enable || pci_pme_capable(dev, state)) { + pci_pme_active(dev, enable); pme_done = true; } @@ -1158,7 +1133,6 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) int pci_prepare_to_sleep(struct pci_dev *dev) { pci_power_t target_state = PCI_D3hot; - int pm = pci_find_capability(dev, PCI_CAP_ID_PM); int error; if (platform_pci_power_manageable(dev)) { @@ -1186,23 +1160,14 @@ int pci_prepare_to_sleep(struct pci_dev *dev) * wake-up events, make it the target state and enable device * to generate PME#. */ - u16 pmc; - - if (!pm) + if (!dev->pm_cap) return -EIO; - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - if (pmc & PCI_PM_CAP_PME_MASK) { - if (!(pmc & PCI_PM_CAP_PME_D3)) { - /* Device cannot generate PME# from D3_hot */ - if (pmc & PCI_PM_CAP_PME_D2) - target_state = PCI_D2; - else if (pmc & PCI_PM_CAP_PME_D1) - target_state = PCI_D1; - else - target_state = PCI_D0; - } - pci_pme_active(dev, pm, true); + if (dev->pme_support) { + while (target_state + && !(dev->pme_support & (1 << target_state))) + target_state--; + pci_pme_active(dev, true); } } @@ -1236,6 +1201,8 @@ void pci_pm_init(struct pci_dev *dev) int pm; u16 pmc; + dev->pm_cap = 0; + /* find PCI PM capability in list */ pm = pci_find_capability(dev, PCI_CAP_ID_PM); if (!pm) @@ -1249,7 +1216,23 @@ void pci_pm_init(struct pci_dev *dev) return; } - if (pmc & PCI_PM_CAP_PME_MASK) { + dev->pm_cap = pm; + + dev->d1_support = false; + dev->d2_support = false; + if (!pci_no_d1d2(dev)) { + if (pmc & PCI_PM_CAP_D1) { + dev_printk(KERN_DEBUG, &dev->dev, "supports D1\n"); + dev->d1_support = true; + } + if (pmc & PCI_PM_CAP_D2) { + dev_printk(KERN_DEBUG, &dev->dev, "supports D2\n"); + dev->d2_support = true; + } + } + + pmc &= PCI_PM_CAP_PME_MASK; + if (pmc) { dev_printk(KERN_INFO, &dev->dev, "PME# supported from%s%s%s%s%s\n", (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "", @@ -1257,6 +1240,7 @@ void pci_pm_init(struct pci_dev *dev) (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "", (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "", (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : ""); + dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT; /* * Make device's PM flags reflect the wake-up capability, but * let the user space enable it to wake up the system as needed. @@ -1264,7 +1248,9 @@ void pci_pm_init(struct pci_dev *dev) device_set_wakeup_capable(&dev->dev, true); device_set_wakeup_enable(&dev->dev, false); /* Disable the PME# generation functionality */ - pci_pme_active(dev, pm, false); + pci_pme_active(dev, false); + } else { + dev->pme_support = 0; } } -- cgit v1.2.3-18-g5258 From c157dfa3e4aea5775389f2f4d53c040bc8813af1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 13 Jul 2008 22:45:06 +0200 Subject: PCI PM: Fix pci_prepare_to_sleep The recently introduced pci_prepare_to_sleep() needs the following fix, because there are systems which are not power manageable by ACPI (ie. ACPI doesn't provide methods to put the device into low power states and back), but require ACPI hooks to be executed for wake-up to work. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e632a58ba5d..ace518116cc 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1152,7 +1152,6 @@ int pci_prepare_to_sleep(struct pci_dev *dev) break; default: target_state = state; - pci_enable_wake(dev, target_state, true); } } else if (device_may_wakeup(&dev->dev)) { /* @@ -1167,10 +1166,11 @@ int pci_prepare_to_sleep(struct pci_dev *dev) while (target_state && !(dev->pme_support & (1 << target_state))) target_state--; - pci_pme_active(dev, true); } } + pci_enable_wake(dev, target_state, true); + error = pci_set_power_state(dev, target_state); if (error) -- cgit v1.2.3-18-g5258 From c300bd2fb583afb6d68804afd38bc90b31310d95 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 10 Jul 2008 02:16:44 +0200 Subject: PCI: include linux/pm_wakeup.h for device_set_wakeup_capable drivers/pci/pci.c needs pm_wakeup.h since it uses device_set_wakup_capable(). The latter also needs to be stubbed out for !CONFIG_PM. Signed-off-by: Stephen Rothwell Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/pci/pci.c') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ace518116cc..44a46c92b72 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -17,6 +17,7 @@ #include #include #include +#include #include /* isa_dma_bridge_buggy */ #include "pci.h" -- cgit v1.2.3-18-g5258