From b1fb1f280d0969f47d4ef19334120f5c34e36080 Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Wed, 21 May 2008 18:56:16 -0700
Subject: cxgb3 - Fix dma mapping error path

Take potential dma mapping errors in account.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/cxgb3/sge.c | 53 ++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 41 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 796eb305cdc..0741deb86ca 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -376,13 +376,16 @@ static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
  *	Add a buffer of the given length to the supplied HW and SW Rx
  *	descriptors.
  */
-static inline void add_one_rx_buf(void *va, unsigned int len,
-				  struct rx_desc *d, struct rx_sw_desc *sd,
-				  unsigned int gen, struct pci_dev *pdev)
+static inline int add_one_rx_buf(void *va, unsigned int len,
+				 struct rx_desc *d, struct rx_sw_desc *sd,
+				 unsigned int gen, struct pci_dev *pdev)
 {
 	dma_addr_t mapping;
 
 	mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
+	if (unlikely(pci_dma_mapping_error(mapping)))
+		return -ENOMEM;
+
 	pci_unmap_addr_set(sd, dma_addr, mapping);
 
 	d->addr_lo = cpu_to_be32(mapping);
@@ -390,6 +393,7 @@ static inline void add_one_rx_buf(void *va, unsigned int len,
 	wmb();
 	d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
 	d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
+	return 0;
 }
 
 static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp)
@@ -424,13 +428,16 @@ static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp)
  *	allocated with the supplied gfp flags.  The caller must assure that
  *	@n does not exceed the queue's capacity.
  */
-static void refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
+static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
 {
 	void *buf_start;
 	struct rx_sw_desc *sd = &q->sdesc[q->pidx];
 	struct rx_desc *d = &q->desc[q->pidx];
+	unsigned int count = 0;
 
 	while (n--) {
+		int err;
+
 		if (q->use_pages) {
 			if (unlikely(alloc_pg_chunk(q, sd, gfp))) {
 nomem:				q->alloc_failed++;
@@ -447,8 +454,16 @@ nomem:				q->alloc_failed++;
 			buf_start = skb->data;
 		}
 
-		add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
-			       adap->pdev);
+		err = add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
+				     adap->pdev);
+		if (unlikely(err)) {
+			if (!q->use_pages) {
+				kfree_skb(sd->skb);
+				sd->skb = NULL;
+			}
+			break;
+		}
+
 		d++;
 		sd++;
 		if (++q->pidx == q->size) {
@@ -458,9 +473,13 @@ nomem:				q->alloc_failed++;
 			d = q->desc;
 		}
 		q->credits++;
+		count++;
 	}
 	wmb();
-	t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
+	if (likely(count))
+		t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
+
+	return count;
 }
 
 static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
@@ -2618,7 +2637,7 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 		      int irq_vec_idx, const struct qset_params *p,
 		      int ntxq, struct net_device *dev)
 {
-	int i, ret = -ENOMEM;
+	int i, avail, ret = -ENOMEM;
 	struct sge_qset *q = &adapter->sge.qs[id];
 
 	init_qset_cntxt(q, id);
@@ -2741,9 +2760,19 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 	q->adap = adapter;
 	q->netdev = dev;
 	t3_update_qset_coalesce(q, p);
+	avail = refill_fl(adapter, &q->fl[0], q->fl[0].size, GFP_KERNEL);
+	if (!avail) {
+		CH_ALERT(adapter, "free list queue 0 initialization failed\n");
+		goto err;
+	}
+	if (avail < q->fl[0].size)
+		CH_WARN(adapter, "free list queue 0 enabled with %d credits\n",
+			avail);
 
-	refill_fl(adapter, &q->fl[0], q->fl[0].size, GFP_KERNEL);
-	refill_fl(adapter, &q->fl[1], q->fl[1].size, GFP_KERNEL);
+	avail = refill_fl(adapter, &q->fl[1], q->fl[1].size, GFP_KERNEL);
+	if (avail < q->fl[1].size)
+		CH_WARN(adapter, "free list queue 1 enabled with %d credits\n",
+			avail);
 	refill_rspq(adapter, &q->rspq, q->rspq.size - 1);
 
 	t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
@@ -2752,9 +2781,9 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 	mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
 	return 0;
 
-      err_unlock:
+err_unlock:
 	spin_unlock_irq(&adapter->sge.reg_lock);
-      err:
+err:
 	t3_free_qset(adapter, q);
 	return ret;
 }
-- 
cgit v1.2.3-18-g5258


From 7385ecf339c504933a98581c2056d83b69b2a82b Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Wed, 21 May 2008 18:56:21 -0700
Subject: cxgb3 - Add page support to jumbo frame Rx queue

Add page support to Jumbo frame Rx queues.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/cxgb3/adapter.h |   4 ++
 drivers/net/cxgb3/sge.c     | 115 ++++++++++++++++++++++++++++++--------------
 2 files changed, 84 insertions(+), 35 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index acebe431d06..263e4faf45e 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -92,6 +92,7 @@ struct sge_fl {                     /* SGE per free-buffer list state */
 	unsigned int gen;           /* free list generation */
 	struct fl_pg_chunk pg_chunk;/* page chunk cache */
 	unsigned int use_pages;     /* whether FL uses pages or sk_buffs */
+	unsigned int order;	    /* order of page allocations */
 	struct rx_desc *desc;       /* address of HW Rx descriptor ring */
 	struct rx_sw_desc *sdesc;   /* address of SW Rx descriptor ring */
 	dma_addr_t   phys_addr;     /* physical address of HW ring start */
@@ -116,12 +117,15 @@ struct sge_rspq {		/* state for an SGE response queue */
 	unsigned int polling;	/* is the queue serviced through NAPI? */
 	unsigned int holdoff_tmr;	/* interrupt holdoff timer in 100ns */
 	unsigned int next_holdoff;	/* holdoff time for next interrupt */
+	unsigned int rx_recycle_buf; /* whether recycling occurred
+					within current sop-eop */
 	struct rsp_desc *desc;	/* address of HW response ring */
 	dma_addr_t phys_addr;	/* physical address of the ring */
 	unsigned int cntxt_id;	/* SGE context id for the response q */
 	spinlock_t lock;	/* guards response processing */
 	struct sk_buff *rx_head;	/* offload packet receive queue head */
 	struct sk_buff *rx_tail;	/* offload packet receive queue tail */
+	struct sk_buff *pg_skb; /* used to build frag list in napi handler */
 
 	unsigned long offload_pkts;
 	unsigned long offload_bundles;
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 0741deb86ca..3e91be55e19 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -55,6 +55,9 @@
  * directly.
  */
 #define FL0_PG_CHUNK_SIZE  2048
+#define FL0_PG_ORDER 0
+#define FL1_PG_CHUNK_SIZE (PAGE_SIZE > 8192 ? 16384 : 8192)
+#define FL1_PG_ORDER (PAGE_SIZE > 8192 ? 0 : 1)
 
 #define SGE_RX_DROP_THRES 16
 
@@ -359,7 +362,7 @@ static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
 	}
 
 	if (q->pg_chunk.page) {
-		__free_page(q->pg_chunk.page);
+		__free_pages(q->pg_chunk.page, q->order);
 		q->pg_chunk.page = NULL;
 	}
 }
@@ -396,10 +399,11 @@ static inline int add_one_rx_buf(void *va, unsigned int len,
 	return 0;
 }
 
-static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp)
+static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp,
+			  unsigned int order)
 {
 	if (!q->pg_chunk.page) {
-		q->pg_chunk.page = alloc_page(gfp);
+		q->pg_chunk.page = alloc_pages(gfp, order);
 		if (unlikely(!q->pg_chunk.page))
 			return -ENOMEM;
 		q->pg_chunk.va = page_address(q->pg_chunk.page);
@@ -408,7 +412,7 @@ static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp)
 	sd->pg_chunk = q->pg_chunk;
 
 	q->pg_chunk.offset += q->buf_size;
-	if (q->pg_chunk.offset == PAGE_SIZE)
+	if (q->pg_chunk.offset == (PAGE_SIZE << order))
 		q->pg_chunk.page = NULL;
 	else {
 		q->pg_chunk.va += q->buf_size;
@@ -439,7 +443,7 @@ static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
 		int err;
 
 		if (q->use_pages) {
-			if (unlikely(alloc_pg_chunk(q, sd, gfp))) {
+			if (unlikely(alloc_pg_chunk(q, sd, gfp, q->order))) {
 nomem:				q->alloc_failed++;
 				break;
 			}
@@ -484,7 +488,8 @@ nomem:				q->alloc_failed++;
 
 static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
 {
-	refill_fl(adap, fl, min(16U, fl->size - fl->credits), GFP_ATOMIC);
+	refill_fl(adap, fl, min(16U, fl->size - fl->credits),
+		  GFP_ATOMIC | __GFP_COMP);
 }
 
 /**
@@ -759,19 +764,22 @@ use_orig_buf:
  * 	that are page chunks rather than sk_buffs.
  */
 static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
-				     unsigned int len, unsigned int drop_thres)
+				     struct sge_rspq *q, unsigned int len,
+				     unsigned int drop_thres)
 {
-	struct sk_buff *skb = NULL;
+	struct sk_buff *newskb, *skb;
 	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
 
-	if (len <= SGE_RX_COPY_THRES) {
-		skb = alloc_skb(len, GFP_ATOMIC);
-		if (likely(skb != NULL)) {
-			__skb_put(skb, len);
+	newskb = skb = q->pg_skb;
+
+	if (!skb && (len <= SGE_RX_COPY_THRES)) {
+		newskb = alloc_skb(len, GFP_ATOMIC);
+		if (likely(newskb != NULL)) {
+			__skb_put(newskb, len);
 			pci_dma_sync_single_for_cpu(adap->pdev,
 					    pci_unmap_addr(sd, dma_addr), len,
 					    PCI_DMA_FROMDEVICE);
-			memcpy(skb->data, sd->pg_chunk.va, len);
+			memcpy(newskb->data, sd->pg_chunk.va, len);
 			pci_dma_sync_single_for_device(adap->pdev,
 					    pci_unmap_addr(sd, dma_addr), len,
 					    PCI_DMA_FROMDEVICE);
@@ -780,14 +788,16 @@ static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
 recycle:
 		fl->credits--;
 		recycle_rx_buf(adap, fl, fl->cidx);
-		return skb;
+		q->rx_recycle_buf++;
+		return newskb;
 	}
 
-	if (unlikely(fl->credits <= drop_thres))
+	if (unlikely(q->rx_recycle_buf || (!skb && fl->credits <= drop_thres)))
 		goto recycle;
 
-	skb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
-	if (unlikely(!skb)) {
+	if (!skb)
+		newskb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);	
+	if (unlikely(!newskb)) {
 		if (!drop_thres)
 			return NULL;
 		goto recycle;
@@ -795,21 +805,29 @@ recycle:
 
 	pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
 			 fl->buf_size, PCI_DMA_FROMDEVICE);
-	__skb_put(skb, SGE_RX_PULL_LEN);
-	memcpy(skb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
-	skb_fill_page_desc(skb, 0, sd->pg_chunk.page,
-			   sd->pg_chunk.offset + SGE_RX_PULL_LEN,
-			   len - SGE_RX_PULL_LEN);
-	skb->len = len;
-	skb->data_len = len - SGE_RX_PULL_LEN;
-	skb->truesize += skb->data_len;
+	if (!skb) {
+		__skb_put(newskb, SGE_RX_PULL_LEN);
+		memcpy(newskb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
+		skb_fill_page_desc(newskb, 0, sd->pg_chunk.page,
+				   sd->pg_chunk.offset + SGE_RX_PULL_LEN,
+				   len - SGE_RX_PULL_LEN);
+		newskb->len = len;
+		newskb->data_len = len - SGE_RX_PULL_LEN;
+	} else {
+		skb_fill_page_desc(newskb, skb_shinfo(newskb)->nr_frags,
+				   sd->pg_chunk.page,
+				   sd->pg_chunk.offset, len);
+		newskb->len += len;
+		newskb->data_len += len;
+	}
+	newskb->truesize += newskb->data_len;
 
 	fl->credits--;
 	/*
 	 * We do not refill FLs here, we let the caller do it to overlap a
 	 * prefetch.
 	 */
-	return skb;
+	return newskb;
 }
 
 /**
@@ -1966,6 +1984,12 @@ static inline int is_new_response(const struct rsp_desc *r,
 	return (r->intr_gen & F_RSPD_GEN2) == q->gen;
 }
 
+static inline void clear_rspq_bufstate(struct sge_rspq * const q)
+{
+	q->pg_skb = NULL;
+	q->rx_recycle_buf = 0;
+}
+
 #define RSPD_GTS_MASK  (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS)
 #define RSPD_CTRL_MASK (RSPD_GTS_MASK | \
 			V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \
@@ -2003,10 +2027,11 @@ static int process_responses(struct adapter *adap, struct sge_qset *qs,
 	q->next_holdoff = q->holdoff_tmr;
 
 	while (likely(budget_left && is_new_response(r, q))) {
-		int eth, ethpad = 2;
+		int packet_complete, eth, ethpad = 2;
 		struct sk_buff *skb = NULL;
 		u32 len, flags = ntohl(r->flags);
-		__be32 rss_hi = *(const __be32 *)r, rss_lo = r->rss_hdr.rss_hash_val;
+		__be32 rss_hi = *(const __be32 *)r,
+		       rss_lo = r->rss_hdr.rss_hash_val;
 
 		eth = r->rss_hdr.opcode == CPL_RX_PKT;
 
@@ -2044,8 +2069,11 @@ no_mem:
 #endif
 				__refill_fl(adap, fl);
 
-				skb = get_packet_pg(adap, fl, G_RSPD_LEN(len),
-						 eth ? SGE_RX_DROP_THRES : 0);
+				skb = get_packet_pg(adap, fl, q,
+						    G_RSPD_LEN(len),
+						    eth ?
+						    SGE_RX_DROP_THRES : 0);
+				q->pg_skb = skb;
 			} else
 				skb = get_packet(adap, fl, G_RSPD_LEN(len),
 						 eth ? SGE_RX_DROP_THRES : 0);
@@ -2079,7 +2107,11 @@ no_mem:
 			q->credits = 0;
 		}
 
-		if (likely(skb != NULL)) {
+		packet_complete = flags &
+				  (F_RSPD_EOP | F_RSPD_IMM_DATA_VALID |
+				   F_RSPD_ASYNC_NOTIF);
+
+		if (skb != NULL && packet_complete) {
 			if (eth)
 				rx_eth(adap, q, skb, ethpad);
 			else {
@@ -2091,6 +2123,9 @@ no_mem:
 						       offload_skbs,
 						       ngathered);
 			}
+
+			if (flags & F_RSPD_EOP)
+				clear_rspq_bufstate(q);	
 		}
 		--budget_left;
 	}
@@ -2706,10 +2741,18 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 #else
 	q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data);
 #endif
-	q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
+#if FL1_PG_CHUNK_SIZE > 0
+	q->fl[1].buf_size = FL1_PG_CHUNK_SIZE;
+#else
 	q->fl[1].buf_size = is_offload(adapter) ?
 		(16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
 		MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
+#endif
+
+	q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
+	q->fl[1].use_pages = FL1_PG_CHUNK_SIZE > 0;
+	q->fl[0].order = FL0_PG_ORDER;
+	q->fl[1].order = FL1_PG_ORDER;
 
 	spin_lock_irq(&adapter->sge.reg_lock);
 
@@ -2760,7 +2803,8 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 	q->adap = adapter;
 	q->netdev = dev;
 	t3_update_qset_coalesce(q, p);
-	avail = refill_fl(adapter, &q->fl[0], q->fl[0].size, GFP_KERNEL);
+	avail = refill_fl(adapter, &q->fl[0], q->fl[0].size,
+			  GFP_KERNEL | __GFP_COMP);
 	if (!avail) {
 		CH_ALERT(adapter, "free list queue 0 initialization failed\n");
 		goto err;
@@ -2769,7 +2813,8 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 		CH_WARN(adapter, "free list queue 0 enabled with %d credits\n",
 			avail);
 
-	avail = refill_fl(adapter, &q->fl[1], q->fl[1].size, GFP_KERNEL);
+	avail = refill_fl(adapter, &q->fl[1], q->fl[1].size,
+			  GFP_KERNEL | __GFP_COMP);
 	if (avail < q->fl[1].size)
 		CH_WARN(adapter, "free list queue 1 enabled with %d credits\n",
 			avail);
@@ -2905,7 +2950,7 @@ void t3_sge_prep(struct adapter *adap, struct sge_params *p)
 		q->coalesce_usecs = 5;
 		q->rspq_size = 1024;
 		q->fl_size = 1024;
-		q->jumbo_size = 512;
+ 		q->jumbo_size = 512;
 		q->txq_size[TXQ_ETH] = 1024;
 		q->txq_size[TXQ_OFLD] = 1024;
 		q->txq_size[TXQ_CTRL] = 256;
-- 
cgit v1.2.3-18-g5258


From b47385bd4f67481a7dbfcf1b4b82e9a67ecb846c Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Wed, 21 May 2008 18:56:26 -0700
Subject: cxgb3 - Add LRO support

Add LRO support.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/Kconfig             |   1 +
 drivers/net/cxgb3/adapter.h     |  14 +++
 drivers/net/cxgb3/common.h      |   1 +
 drivers/net/cxgb3/cxgb3_ioctl.h |   1 +
 drivers/net/cxgb3/cxgb3_main.c  |  19 ++++
 drivers/net/cxgb3/sge.c         | 233 +++++++++++++++++++++++++++++++++++++---
 drivers/net/cxgb3/t3_cpl.h      |  11 ++
 7 files changed, 268 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9f6cc8a5607..daeb23d7fec 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2409,6 +2409,7 @@ config CHELSIO_T3
 	tristate "Chelsio Communications T3 10Gb Ethernet support"
 	depends on PCI
 	select FW_LOADER
+	select INET_LRO
 	help
 	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
 	  adapters.
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 263e4faf45e..271140433b0 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -42,6 +42,7 @@
 #include <linux/cache.h>
 #include <linux/mutex.h>
 #include <linux/bitops.h>
+#include <linux/inet_lro.h>
 #include "t3cdev.h"
 #include <asm/io.h>
 
@@ -173,16 +174,29 @@ enum {				/* per port SGE statistics */
 	SGE_PSTAT_TX_CSUM,	/* # of TX checksum offloads */
 	SGE_PSTAT_VLANEX,	/* # of VLAN tag extractions */
 	SGE_PSTAT_VLANINS,	/* # of VLAN tag insertions */
+	SGE_PSTAT_LRO_AGGR,	/* # of page chunks added to LRO sessions */
+	SGE_PSTAT_LRO_FLUSHED,	/* # of flushed LRO sessions */
+	SGE_PSTAT_LRO_NO_DESC,	/* # of overflown LRO sessions */
 
 	SGE_PSTAT_MAX		/* must be last */
 };
 
+#define T3_MAX_LRO_SES 8
+#define T3_MAX_LRO_MAX_PKTS 64
+
 struct sge_qset {		/* an SGE queue set */
 	struct adapter *adap;
 	struct napi_struct napi;
 	struct sge_rspq rspq;
 	struct sge_fl fl[SGE_RXQ_PER_SET];
 	struct sge_txq txq[SGE_TXQ_PER_SET];
+	struct net_lro_mgr lro_mgr;
+	struct net_lro_desc lro_desc[T3_MAX_LRO_SES];
+	struct skb_frag_struct *lro_frag_tbl;
+	int lro_nfrags;
+	int lro_enabled;
+	int lro_frag_len;
+	void *lro_va;
 	struct net_device *netdev;
 	unsigned long txq_stopped;	/* which Tx queues are stopped */
 	struct timer_list tx_reclaim_timer;	/* reclaims TX buffers */
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 579bee42a5c..d444f5881f5 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -351,6 +351,7 @@ struct tp_params {
 
 struct qset_params {		/* SGE queue set parameters */
 	unsigned int polling;	/* polling/interrupt service for rspq */
+	unsigned int lro;	/* large receive offload */
 	unsigned int coalesce_usecs;	/* irq coalescing timer */
 	unsigned int rspq_size;	/* # of entries in response queue */
 	unsigned int fl_size;	/* # of entries in regular free list */
diff --git a/drivers/net/cxgb3/cxgb3_ioctl.h b/drivers/net/cxgb3/cxgb3_ioctl.h
index 0a82fcddf2d..68200a14065 100644
--- a/drivers/net/cxgb3/cxgb3_ioctl.h
+++ b/drivers/net/cxgb3/cxgb3_ioctl.h
@@ -90,6 +90,7 @@ struct ch_qset_params {
 	int32_t fl_size[2];
 	int32_t intr_lat;
 	int32_t polling;
+	int32_t lro;
 	int32_t cong_thres;
 };
 
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 3a312721679..5447f3e60f0 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1212,6 +1212,9 @@ static char stats_strings[][ETH_GSTRING_LEN] = {
 	"VLANinsertions     ",
 	"TxCsumOffload      ",
 	"RxCsumGood         ",
+	"LroAggregated      ",
+	"LroFlushed         ",
+	"LroNoDesc          ",
 	"RxDrops            ",
 
 	"CheckTXEnToggled   ",
@@ -1340,6 +1343,9 @@ static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
 	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANINS);
 	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TX_CSUM);
 	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_RX_CSUM_GOOD);
+	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_LRO_AGGR);
+	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_LRO_FLUSHED);
+	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_LRO_NO_DESC);
 	*data++ = s->rx_cong_drops;
 
 	*data++ = s->num_toggled;
@@ -1558,6 +1564,13 @@ static int set_rx_csum(struct net_device *dev, u32 data)
 	struct port_info *p = netdev_priv(dev);
 
 	p->rx_csum_offload = data;
+	if (!data) {
+		struct adapter *adap = p->adapter;
+		int i;
+
+		for (i = p->first_qset; i < p->first_qset + p->nqsets; i++)
+			adap->sge.qs[i].lro_enabled = 0;
+	}
 	return 0;
 }
 
@@ -1830,6 +1843,11 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 				}
 			}
 		}
+		if (t.lro >= 0) {
+			struct sge_qset *qs = &adapter->sge.qs[t.qset_idx];
+			q->lro = t.lro;
+			qs->lro_enabled = t.lro;
+		}
 		break;
 	}
 	case CHELSIO_GET_QSET_PARAMS:{
@@ -1849,6 +1867,7 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 		t.fl_size[0] = q->fl_size;
 		t.fl_size[1] = q->jumbo_size;
 		t.polling = q->polling;
+		t.lro = q->lro;
 		t.intr_lat = q->coalesce_usecs;
 		t.cong_thres = q->cong_thres;
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 3e91be55e19..a96331c875e 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -584,6 +584,8 @@ static void t3_reset_qset(struct sge_qset *q)
 	memset(q->txq, 0, sizeof(struct sge_txq) * SGE_TXQ_PER_SET);
 	q->txq_stopped = 0;
 	memset(&q->tx_reclaim_timer, 0, sizeof(q->tx_reclaim_timer));
+	kfree(q->lro_frag_tbl);
+	q->lro_nfrags = q->lro_frag_len = 0;
 }
 
 
@@ -796,7 +798,7 @@ recycle:
 		goto recycle;
 
 	if (!skb)
-		newskb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);	
+		newskb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
 	if (unlikely(!newskb)) {
 		if (!drop_thres)
 			return NULL;
@@ -1868,9 +1870,10 @@ static void restart_tx(struct sge_qset *qs)
  *	if it was immediate data in a response.
  */
 static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
-		   struct sk_buff *skb, int pad)
+		   struct sk_buff *skb, int pad, int lro)
 {
 	struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad);
+	struct sge_qset *qs = rspq_to_qset(rq);
 	struct port_info *pi;
 
 	skb_pull(skb, sizeof(*p) + pad);
@@ -1887,18 +1890,202 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
 	if (unlikely(p->vlan_valid)) {
 		struct vlan_group *grp = pi->vlan_grp;
 
-		rspq_to_qset(rq)->port_stats[SGE_PSTAT_VLANEX]++;
+		qs->port_stats[SGE_PSTAT_VLANEX]++;
 		if (likely(grp))
-			__vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
-					  rq->polling);
+			if (lro)
+				lro_vlan_hwaccel_receive_skb(&qs->lro_mgr, skb,
+							     grp,
+							     ntohs(p->vlan),
+							     p);
+			else
+				__vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
+					  	  rq->polling);
 		else
 			dev_kfree_skb_any(skb);
-	} else if (rq->polling)
-		netif_receive_skb(skb);
-	else
+	} else if (rq->polling) {
+		if (lro)
+			lro_receive_skb(&qs->lro_mgr, skb, p);
+		else
+			netif_receive_skb(skb);
+	} else
 		netif_rx(skb);
 }
 
+static inline int is_eth_tcp(u32 rss)
+{
+	return G_HASHTYPE(ntohl(rss)) == RSS_HASH_4_TUPLE;
+}
+
+/**
+ *	lro_frame_ok - check if an ingress packet is eligible for LRO
+ *	@p: the CPL header of the packet
+ *
+ *	Returns true if a received packet is eligible for LRO.
+ *	The following conditions must be true:
+ *	- packet is TCP/IP Ethernet II (checked elsewhere)
+ *	- not an IP fragment
+ *	- no IP options
+ *	- TCP/IP checksums are correct
+ *	- the packet is for this host
+ */
+static inline int lro_frame_ok(const struct cpl_rx_pkt *p)
+{
+	const struct ethhdr *eh = (struct ethhdr *)(p + 1);
+	const struct iphdr *ih = (struct iphdr *)(eh + 1);
+
+	return (*((u8 *)p + 1) & 0x90) == 0x10 && p->csum == htons(0xffff) &&
+		eh->h_proto == htons(ETH_P_IP) && ih->ihl == (sizeof(*ih) >> 2);
+}
+
+#define TCP_FLAG_MASK (TCP_FLAG_CWR | TCP_FLAG_ECE | TCP_FLAG_URG |\
+                       TCP_FLAG_ACK | TCP_FLAG_PSH | TCP_FLAG_RST |\
+		                       TCP_FLAG_SYN | TCP_FLAG_FIN)
+#define TSTAMP_WORD ((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |\
+                     (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)
+
+/**
+ *	lro_segment_ok - check if a TCP segment is eligible for LRO
+ *	@tcph: the TCP header of the packet
+ *
+ *	Returns true if a TCP packet is eligible for LRO.  This requires that
+ *	the packet have only the ACK flag set and no TCP options besides
+ *	time stamps.
+ */
+static inline int lro_segment_ok(const struct tcphdr *tcph)
+{
+	int optlen;
+
+	if (unlikely((tcp_flag_word(tcph) & TCP_FLAG_MASK) != TCP_FLAG_ACK))
+		return 0;
+
+	optlen = (tcph->doff << 2) - sizeof(*tcph);
+	if (optlen) {
+		const u32 *opt = (const u32 *)(tcph + 1);
+
+		if (optlen != TCPOLEN_TSTAMP_ALIGNED ||
+		    *opt != htonl(TSTAMP_WORD) || !opt[2])
+			return 0;
+	}
+	return 1;
+}
+
+static int t3_get_lro_header(void **eh,  void **iph, void **tcph,
+			     u64 *hdr_flags, void *priv)
+{
+	const struct cpl_rx_pkt *cpl = priv;
+
+	if (!lro_frame_ok(cpl))
+		return -1;
+
+	*eh = (struct ethhdr *)(cpl + 1);
+	*iph = (struct iphdr *)((struct ethhdr *)*eh + 1);
+	*tcph = (struct tcphdr *)((struct iphdr *)*iph + 1);
+
+	 if (!lro_segment_ok(*tcph))
+		return -1;
+
+	*hdr_flags = LRO_IPV4 | LRO_TCP;
+	return 0;
+}
+
+static int t3_get_skb_header(struct sk_buff *skb,
+			      void **iph, void **tcph, u64 *hdr_flags,
+			      void *priv)
+{
+	void *eh;
+
+	return t3_get_lro_header(&eh, iph, tcph, hdr_flags, priv);
+}
+
+static int t3_get_frag_header(struct skb_frag_struct *frag, void **eh,
+			      void **iph, void **tcph, u64 *hdr_flags,
+			      void *priv)
+{
+	return t3_get_lro_header(eh, iph, tcph, hdr_flags, priv);
+}
+
+/**
+ *	lro_add_page - add a page chunk to an LRO session
+ *	@adap: the adapter
+ *	@qs: the associated queue set
+ *	@fl: the free list containing the page chunk to add
+ *	@len: packet length
+ *	@complete: Indicates the last fragment of a frame
+ *
+ *	Add a received packet contained in a page chunk to an existing LRO
+ *	session.
+ */
+static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
+			 struct sge_fl *fl, int len, int complete)
+{
+	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+	struct cpl_rx_pkt *cpl;
+	struct skb_frag_struct *rx_frag = qs->lro_frag_tbl;
+	int nr_frags = qs->lro_nfrags, frag_len = qs->lro_frag_len;
+	int offset = 0;
+
+	if (!nr_frags) {
+		offset = 2 + sizeof(struct cpl_rx_pkt);
+		qs->lro_va = cpl = sd->pg_chunk.va + 2;
+	}
+
+	fl->credits--;
+
+	len -= offset;
+	pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
+			 fl->buf_size, PCI_DMA_FROMDEVICE);
+
+	rx_frag += nr_frags;
+	rx_frag->page = sd->pg_chunk.page;
+	rx_frag->page_offset = sd->pg_chunk.offset + offset;
+	rx_frag->size = len;
+	frag_len += len;
+	qs->lro_nfrags++;
+	qs->lro_frag_len = frag_len;
+
+	if (!complete)
+		return;
+
+	qs->lro_nfrags = qs->lro_frag_len = 0;
+	cpl = qs->lro_va;
+
+	if (unlikely(cpl->vlan_valid)) {
+		struct net_device *dev = qs->netdev;
+		struct port_info *pi = netdev_priv(dev);
+		struct vlan_group *grp = pi->vlan_grp;
+
+		if (likely(grp != NULL)) {
+			lro_vlan_hwaccel_receive_frags(&qs->lro_mgr,
+						       qs->lro_frag_tbl,
+						       frag_len, frag_len,
+						       grp, ntohs(cpl->vlan),
+						       cpl, 0);
+			return;
+		}
+	}
+	lro_receive_frags(&qs->lro_mgr, qs->lro_frag_tbl,
+			  frag_len, frag_len, cpl, 0);
+}
+
+/**
+ *	init_lro_mgr - initialize a LRO manager object
+ *	@lro_mgr: the LRO manager object
+ */
+static void init_lro_mgr(struct sge_qset *qs, struct net_lro_mgr *lro_mgr)
+{
+	lro_mgr->dev = qs->netdev;
+	lro_mgr->features = LRO_F_NAPI;
+	lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
+	lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
+	lro_mgr->max_desc = T3_MAX_LRO_SES;
+	lro_mgr->lro_arr = qs->lro_desc;
+	lro_mgr->get_frag_header = t3_get_frag_header;
+	lro_mgr->get_skb_header = t3_get_skb_header;
+	lro_mgr->max_aggr = T3_MAX_LRO_MAX_PKTS;
+	if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
+		lro_mgr->max_aggr = MAX_SKB_FRAGS;
+}
+
 /**
  *	handle_rsp_cntrl_info - handles control information in a response
  *	@qs: the queue set corresponding to the response
@@ -2027,7 +2214,7 @@ static int process_responses(struct adapter *adap, struct sge_qset *qs,
 	q->next_holdoff = q->holdoff_tmr;
 
 	while (likely(budget_left && is_new_response(r, q))) {
-		int packet_complete, eth, ethpad = 2;
+		int packet_complete, eth, ethpad = 2, lro = qs->lro_enabled;
 		struct sk_buff *skb = NULL;
 		u32 len, flags = ntohl(r->flags);
 		__be32 rss_hi = *(const __be32 *)r,
@@ -2059,6 +2246,9 @@ no_mem:
 		} else if ((len = ntohl(r->len_cq)) != 0) {
 			struct sge_fl *fl;
 
+			if (eth)
+				lro = qs->lro_enabled && is_eth_tcp(rss_hi);
+
 			fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
 			if (fl->use_pages) {
 				void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
@@ -2068,6 +2258,12 @@ no_mem:
 				prefetch(addr + L1_CACHE_BYTES);
 #endif
 				__refill_fl(adap, fl);
+				if (lro > 0) {
+					lro_add_page(adap, qs, fl,
+						     G_RSPD_LEN(len),
+						     flags & F_RSPD_EOP);
+					 goto next_fl;
+				}
 
 				skb = get_packet_pg(adap, fl, q,
 						    G_RSPD_LEN(len),
@@ -2083,7 +2279,7 @@ no_mem:
 				q->rx_drops++;
 			} else if (unlikely(r->rss_hdr.opcode == CPL_TRACE_PKT))
 				__skb_pull(skb, 2);
-
+next_fl:
 			if (++fl->cidx == fl->size)
 				fl->cidx = 0;
 		} else
@@ -2113,7 +2309,7 @@ no_mem:
 
 		if (skb != NULL && packet_complete) {
 			if (eth)
-				rx_eth(adap, q, skb, ethpad);
+				rx_eth(adap, q, skb, ethpad, lro);
 			else {
 				q->offload_pkts++;
 				/* Preserve the RSS info in csum & priority */
@@ -2125,12 +2321,17 @@ no_mem:
 			}
 
 			if (flags & F_RSPD_EOP)
-				clear_rspq_bufstate(q);	
+				clear_rspq_bufstate(q);
 		}
 		--budget_left;
 	}
 
 	deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered);
+	lro_flush_all(&qs->lro_mgr);
+	qs->port_stats[SGE_PSTAT_LRO_AGGR] = qs->lro_mgr.stats.aggregated;
+	qs->port_stats[SGE_PSTAT_LRO_FLUSHED] = qs->lro_mgr.stats.flushed;
+	qs->port_stats[SGE_PSTAT_LRO_NO_DESC] = qs->lro_mgr.stats.no_desc;
+
 	if (sleeping)
 		check_ring_db(adap, qs, sleeping);
 
@@ -2674,6 +2875,7 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 {
 	int i, avail, ret = -ENOMEM;
 	struct sge_qset *q = &adapter->sge.qs[id];
+	struct net_lro_mgr *lro_mgr = &q->lro_mgr;
 
 	init_qset_cntxt(q, id);
 	init_timer(&q->tx_reclaim_timer);
@@ -2754,6 +2956,10 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 	q->fl[0].order = FL0_PG_ORDER;
 	q->fl[1].order = FL1_PG_ORDER;
 
+	q->lro_frag_tbl = kcalloc(MAX_FRAME_SIZE / FL1_PG_CHUNK_SIZE + 1,
+				  sizeof(struct skb_frag_struct),
+				  GFP_KERNEL);
+	q->lro_nfrags = q->lro_frag_len = 0;
 	spin_lock_irq(&adapter->sge.reg_lock);
 
 	/* FL threshold comparison uses < */
@@ -2803,6 +3009,9 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 	q->adap = adapter;
 	q->netdev = dev;
 	t3_update_qset_coalesce(q, p);
+
+	init_lro_mgr(q, lro_mgr);
+
 	avail = refill_fl(adapter, &q->fl[0], q->fl[0].size,
 			  GFP_KERNEL | __GFP_COMP);
 	if (!avail) {
diff --git a/drivers/net/cxgb3/t3_cpl.h b/drivers/net/cxgb3/t3_cpl.h
index b7a1a310dfd..a666c5d51cc 100644
--- a/drivers/net/cxgb3/t3_cpl.h
+++ b/drivers/net/cxgb3/t3_cpl.h
@@ -174,6 +174,13 @@ enum {				/* TCP congestion control algorithms */
 	CONG_ALG_HIGHSPEED
 };
 
+enum {			/* RSS hash type */
+	RSS_HASH_NONE = 0,
+	RSS_HASH_2_TUPLE = 1,
+	RSS_HASH_4_TUPLE = 2,
+	RSS_HASH_TCPV6 = 3
+};
+
 union opcode_tid {
 	__be32 opcode_tid;
 	__u8 opcode;
@@ -184,6 +191,10 @@ union opcode_tid {
 #define G_OPCODE(x) (((x) >> S_OPCODE) & 0xFF)
 #define G_TID(x)    ((x) & 0xFFFFFF)
 
+#define S_HASHTYPE 22
+#define M_HASHTYPE 0x3
+#define G_HASHTYPE(x) (((x) >> S_HASHTYPE) & M_HASHTYPE)
+
 /* tid is assumed to be 24-bits */
 #define MK_OPCODE_TID(opcode, tid) (V_OPCODE(opcode) | (tid))
 
-- 
cgit v1.2.3-18-g5258


From d63ddcec20f59e78212aeaf5144e9652c0097211 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ZenIV.linux.org.uk>
Date: Wed, 21 May 2008 01:34:30 +0100
Subject: misc drivers/net endianness noise

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/3c509.c                    | 15 +++++++--------
 drivers/net/atlx/atl1.c                |  2 +-
 drivers/net/usb/catc.c                 |  5 ++++-
 drivers/net/usb/rndis_host.c           |  4 ++--
 drivers/net/wireless/zd1211rw/zd_mac.c |  2 +-
 drivers/net/wireless/zd1211rw/zd_usb.c |  2 +-
 6 files changed, 16 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index e6c545fe5f5..87d8795823d 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -413,7 +413,7 @@ static int __devinit el3_pnp_probe(struct pnp_dev *pdev,
 {
 	short i;
 	int ioaddr, irq, if_port;
-	u16 phys_addr[3];
+	__be16 phys_addr[3];
 	struct net_device *dev = NULL;
 	int err;
 
@@ -605,7 +605,7 @@ static int __init el3_mca_probe(struct device *device)
 
 	short i;
 	int ioaddr, irq, if_port;
-	u16 phys_addr[3];
+	__be16 phys_addr[3];
 	struct net_device *dev = NULL;
 	u_char pos4, pos5;
 	struct mca_device *mdev = to_mca_device(device);
@@ -635,14 +635,13 @@ static int __init el3_mca_probe(struct device *device)
 			printk(KERN_DEBUG "3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);
 	}
 	EL3WINDOW(0);
-	for (i = 0; i < 3; i++) {
-			phys_addr[i] = htons(read_eeprom(ioaddr, i));
-	}
+	for (i = 0; i < 3; i++)
+		phys_addr[i] = htons(read_eeprom(ioaddr, i));
 
 	dev = alloc_etherdev(sizeof (struct el3_private));
 	if (dev == NULL) {
-			release_region(ioaddr, EL3_IO_EXTENT);
-			return -ENOMEM;
+		release_region(ioaddr, EL3_IO_EXTENT);
+		return -ENOMEM;
 	}
 
 	netdev_boot_setup_check(dev);
@@ -668,7 +667,7 @@ static int __init el3_eisa_probe (struct device *device)
 {
 	short i;
 	int ioaddr, irq, if_port;
-	u16 phys_addr[3];
+	__be16 phys_addr[3];
 	struct net_device *dev = NULL;
 	struct eisa_device *edev;
 	int err;
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 9c2394d4942..6e4c80d41b0 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2135,7 +2135,7 @@ static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
 				return -1;
 		}
 
-		if (skb->protocol == ntohs(ETH_P_IP)) {
+		if (skb->protocol == htons(ETH_P_IP)) {
 			struct iphdr *iph = ip_hdr(skb);
 
 			real_len = (((unsigned char *)iph - skb->data) +
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 76752d84a30..22c17bbacb6 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -423,7 +423,10 @@ static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 	catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
 	tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
-	*((u16*)tx_buf) = (catc->is_f5u011) ? cpu_to_be16((u16)skb->len) : cpu_to_le16((u16)skb->len);
+	if (catc->is_f5u011)
+		*(__be16 *)tx_buf = cpu_to_be16(skb->len);
+	else
+		*(__le16 *)tx_buf = cpu_to_le16(skb->len);
 	skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
 	catc->tx_ptr += skb->len + 2;
 
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 21a7785cb8b..3969b7a2b8e 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -283,8 +283,8 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
 		struct rndis_set_c	*set_c;
 		struct rndis_halt	*halt;
 	} u;
-	u32			tmp, phym_unspec;
-	__le32			*phym;
+	u32			tmp;
+	__le32			phym_unspec, *phym;
 	int			reply_len;
 	unsigned char		*bp;
 
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 0c736735e21..c99d4a4fde0 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -807,7 +807,7 @@ void zd_process_intr(struct work_struct *work)
 	u16 int_status;
 	struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
 
-	int_status = le16_to_cpu(*(u16 *)(mac->intr_buffer+4));
+	int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer+4));
 	if (int_status & INT_CFG_NEXT_BCN) {
 		if (net_ratelimit())
 			dev_dbg_f(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 12e24f04ddd..8941f5eb96c 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -342,7 +342,7 @@ static inline void handle_regs_int(struct urb *urb)
 	ZD_ASSERT(in_interrupt());
 	spin_lock(&intr->lock);
 
-	int_num = le16_to_cpu(*(u16 *)(urb->transfer_buffer+2));
+	int_num = le16_to_cpu(*(__le16 *)(urb->transfer_buffer+2));
 	if (int_num == CR_INTERRUPT) {
 		struct zd_mac *mac = zd_hw_mac(zd_usb_to_hw(urb->context));
 		memcpy(&mac->intr_buffer, urb->transfer_buffer,
-- 
cgit v1.2.3-18-g5258


From 5ce0da8f0386b62345312ec8fed31303732f4220 Mon Sep 17 00:00:00 2001
From: Jay Vosburgh <fubar@us.ibm.com>
Date: Sat, 17 May 2008 21:10:07 -0700
Subject: bonding: Use msecs_to_jiffies, eliminate panic
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

	Convert bonding to use msecs_to_jiffies instead of doing the
math.  For the ARP monitor, there was an underflow problem that could
result in an infinite loop.  The miimon already had that worked around,
but this is cleaner.

	Originally by Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Jay Vosburgh corrected a math error in the original; Nicolas' original
commit message is:

When setting arp_interval parameter to a very low value, delta_in_ticks
for next arp might become 0, causing an infinite loop.

See http://bugzilla.kernel.org/show_bug.cgi?id=10680

Same problem for miimon parameter already fixed, but fix might be
enhanced, by using msecs_to_jiffies() function.

Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/bonding/bond_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 50a40e43315..12c71582f4f 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2397,7 +2397,7 @@ void bond_mii_monitor(struct work_struct *work)
 		read_lock(&bond->lock);
 	}
 
-	delay = ((bond->params.miimon * HZ) / 1000) ? : 1;
+	delay = msecs_to_jiffies(bond->params.miimon);
 	read_unlock(&bond->lock);
 	queue_delayed_work(bond->wq, &bond->mii_work, delay);
 }
@@ -2707,7 +2707,7 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 
 	read_lock(&bond->lock);
 
-	delta_in_ticks = (bond->params.arp_interval * HZ) / 1000;
+	delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
 
 	if (bond->kill_timers) {
 		goto out;
@@ -2837,7 +2837,7 @@ void bond_activebackup_arp_mon(struct work_struct *work)
 
 	read_lock(&bond->lock);
 
-	delta_in_ticks = (bond->params.arp_interval * HZ) / 1000;
+	delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
 
 	if (bond->kill_timers) {
 		goto out;
-- 
cgit v1.2.3-18-g5258


From 4b8a9239ee708958ed72722a0e5e0cf34243ad26 Mon Sep 17 00:00:00 2001
From: Jay Vosburgh <fubar@us.ibm.com>
Date: Sat, 17 May 2008 21:10:08 -0700
Subject: bonding: remove test for IP in ARP monitor

	Remove bond_has_ip and all references to it.  With this change,
the ARP monitor will always send ARP probes if the master is up and has
at least one slave.  If the bond has an IP address, it is used in the
ARP probe; if not, the probes are sent with all zeros in the sender's
IP address (which is consistent with an RFC 2131 4.4.1 duplicate address
probe).

	This is useful for cases when bonding itself is hidden underneath
a layer of virtual devices, e.g., with Xen.

	Change suggested by Tsutomu Fujii <t-fujii@nb.jp.nec.com>, who
included a one-line patch that only affected active-backup mode.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/bonding/bond_main.c | 31 ++++---------------------------
 1 file changed, 4 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 12c71582f4f..e3da1e53b9c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2426,25 +2426,6 @@ out:
 	return addr;
 }
 
-static int bond_has_ip(struct bonding *bond)
-{
-	struct vlan_entry *vlan, *vlan_next;
-
-	if (bond->master_ip)
-		return 1;
-
-	if (list_empty(&bond->vlan_list))
-		return 0;
-
-	list_for_each_entry_safe(vlan, vlan_next, &bond->vlan_list,
-				 vlan_list) {
-		if (vlan->vlan_ip)
-			return 1;
-	}
-
-	return 0;
-}
-
 static int bond_has_this_ip(struct bonding *bond, __be32 ip)
 {
 	struct vlan_entry *vlan, *vlan_next;
@@ -2764,8 +2745,7 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 			 * if we don't know our ip yet
 			 */
 			if (time_after_eq(jiffies, slave->dev->trans_start + 2*delta_in_ticks) ||
-			    (time_after_eq(jiffies, slave->dev->last_rx + 2*delta_in_ticks) &&
-			     bond_has_ip(bond))) {
+			    (time_after_eq(jiffies, slave->dev->last_rx + 2*delta_in_ticks))) {
 
 				slave->link  = BOND_LINK_DOWN;
 				slave->state = BOND_STATE_BACKUP;
@@ -2900,8 +2880,7 @@ void bond_activebackup_arp_mon(struct work_struct *work)
 
 			if ((slave != bond->curr_active_slave) &&
 			    (!bond->current_arp_slave) &&
-			    (time_after_eq(jiffies, slave_last_rx(bond, slave) + 3*delta_in_ticks) &&
-			     bond_has_ip(bond))) {
+			    (time_after_eq(jiffies, slave_last_rx(bond, slave) + 3*delta_in_ticks))) {
 				/* a backup slave has gone down; three times
 				 * the delta allows the current slave to be
 				 * taken out before the backup slave.
@@ -2947,8 +2926,7 @@ void bond_activebackup_arp_mon(struct work_struct *work)
 		 * if it is up and needs to take over as the curr_active_slave
 		 */
 		if ((time_after_eq(jiffies, slave->dev->trans_start + 2*delta_in_ticks) ||
-			(time_after_eq(jiffies, slave_last_rx(bond, slave) + 2*delta_in_ticks) &&
-			 bond_has_ip(bond))) &&
+		     (time_after_eq(jiffies, slave_last_rx(bond, slave) + 2*delta_in_ticks))) &&
 			time_after_eq(jiffies, slave->jiffies + 2*delta_in_ticks)) {
 
 			slave->link  = BOND_LINK_DOWN;
@@ -3000,9 +2978,8 @@ void bond_activebackup_arp_mon(struct work_struct *work)
 		/* the current slave must tx an arp to ensure backup slaves
 		 * rx traffic
 		 */
-		if (slave && bond_has_ip(bond)) {
+		if (slave && IS_UP(slave->dev))
 			bond_arp_send_all(bond, slave);
-		}
 	}
 
 	/* if we don't have a curr_active_slave, search for the next available
-- 
cgit v1.2.3-18-g5258


From 0dd646fe0549251e79d6fb03e6773bcc6ccea61f Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Sat, 17 May 2008 21:10:09 -0700
Subject: bonding: Remove redundant argument from bond_create.

While we're fixing the bond_create, I hope it's OK to polish it
a bit after the fixes.

The third argument is NULL at the first caller and is ignored by
the second one, so remove it.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/bonding/bond_main.c  | 7 ++-----
 drivers/net/bonding/bond_sysfs.c | 2 +-
 drivers/net/bonding/bonding.h    | 2 +-
 3 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index e3da1e53b9c..6b1216455bc 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4848,7 +4848,7 @@ static struct lock_class_key bonding_netdev_xmit_lock_key;
  * Caller must NOT hold rtnl_lock; we need to release it here before we
  * set up our sysfs entries.
  */
-int bond_create(char *name, struct bond_params *params, struct bonding **newbond)
+int bond_create(char *name, struct bond_params *params)
 {
 	struct net_device *bond_dev;
 	struct bonding *bond, *nxt;
@@ -4902,9 +4902,6 @@ int bond_create(char *name, struct bond_params *params, struct bonding **newbond
 
 	lockdep_set_class(&bond_dev->_xmit_lock, &bonding_netdev_xmit_lock_key);
 
-	if (newbond)
-		*newbond = bond_dev->priv;
-
 	netif_carrier_off(bond_dev);
 
 	up_write(&bonding_rwsem);
@@ -4950,7 +4947,7 @@ static int __init bonding_init(void)
 	init_rwsem(&bonding_rwsem);
 
 	for (i = 0; i < max_bonds; i++) {
-		res = bond_create(NULL, &bonding_defaults, NULL);
+		res = bond_create(NULL, &bonding_defaults);
 		if (res)
 			goto err;
 	}
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 08f3d396bcd..452a789bf2e 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -122,7 +122,7 @@ static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t
 	if (command[0] == '+') {
 		printk(KERN_INFO DRV_NAME
 			": %s is being created...\n", ifname);
-		rv = bond_create(ifname, &bonding_defaults, &bond);
+		rv = bond_create(ifname, &bonding_defaults);
 		if (rv) {
 			printk(KERN_INFO DRV_NAME ": Bond creation failed.\n");
 			res = rv;
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index a3c74e20aa5..0ce7f4ae920 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -301,7 +301,7 @@ static inline void bond_unset_master_alb_flags(struct bonding *bond)
 
 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
-int bond_create(char *name, struct bond_params *params, struct bonding **newbond);
+int bond_create(char *name, struct bond_params *params);
 void bond_destroy(struct bonding *bond);
 int  bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev);
 int bond_create_sysfs(void);
-- 
cgit v1.2.3-18-g5258


From 0883beca7f39ab0c6447af35080e5caaa07418e3 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Sat, 17 May 2008 21:10:10 -0700
Subject: bonding: Relax unneeded _safe lists iterations.

Many places either do not modify the list under the list_for_each_xxx,
or break out of the loop as soon as the first element is removed.

Thus, this _safe iteration just occupies some unneeded .text space
and requires an additional variable.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/bonding/bond_main.c  | 31 ++++++++++++++-----------------
 drivers/net/bonding/bond_sysfs.c |  3 +--
 2 files changed, 15 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6b1216455bc..5e3b942fb51 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -261,14 +261,14 @@ static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
  */
 static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
 {
-	struct vlan_entry *vlan, *next;
+	struct vlan_entry *vlan;
 	int res = -ENODEV;
 
 	dprintk("bond: %s, vlan id %d\n", bond->dev->name, vlan_id);
 
 	write_lock_bh(&bond->lock);
 
-	list_for_each_entry_safe(vlan, next, &bond->vlan_list, vlan_list) {
+	list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
 		if (vlan->vlan_id == vlan_id) {
 			list_del(&vlan->vlan_list);
 
@@ -2428,7 +2428,7 @@ out:
 
 static int bond_has_this_ip(struct bonding *bond, __be32 ip)
 {
-	struct vlan_entry *vlan, *vlan_next;
+	struct vlan_entry *vlan;
 
 	if (ip == bond->master_ip)
 		return 1;
@@ -2436,8 +2436,7 @@ static int bond_has_this_ip(struct bonding *bond, __be32 ip)
 	if (list_empty(&bond->vlan_list))
 		return 0;
 
-	list_for_each_entry_safe(vlan, vlan_next, &bond->vlan_list,
-				 vlan_list) {
+	list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
 		if (ip == vlan->vlan_ip)
 			return 1;
 	}
@@ -2479,7 +2478,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 {
 	int i, vlan_id, rv;
 	__be32 *targets = bond->params.arp_targets;
-	struct vlan_entry *vlan, *vlan_next;
+	struct vlan_entry *vlan;
 	struct net_device *vlan_dev;
 	struct flowi fl;
 	struct rtable *rt;
@@ -2526,8 +2525,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		}
 
 		vlan_id = 0;
-		list_for_each_entry_safe(vlan, vlan_next, &bond->vlan_list,
-					 vlan_list) {
+		list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
 			vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
 			if (vlan_dev == rt->u.dst.dev) {
 				vlan_id = vlan->vlan_id;
@@ -3477,13 +3475,13 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event,
 {
 	struct in_ifaddr *ifa = ptr;
 	struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev;
-	struct bonding *bond, *bond_next;
-	struct vlan_entry *vlan, *vlan_next;
+	struct bonding *bond;
+	struct vlan_entry *vlan;
 
 	if (dev_net(ifa->ifa_dev->dev) != &init_net)
 		return NOTIFY_DONE;
 
-	list_for_each_entry_safe(bond, bond_next, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bond_dev_list, bond_list) {
 		if (bond->dev == event_dev) {
 			switch (event) {
 			case NETDEV_UP:
@@ -3500,8 +3498,7 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event,
 		if (list_empty(&bond->vlan_list))
 			continue;
 
-		list_for_each_entry_safe(vlan, vlan_next, &bond->vlan_list,
-					 vlan_list) {
+		list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
 			vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
 			if (vlan_dev == event_dev) {
 				switch (event) {
@@ -4851,7 +4848,7 @@ static struct lock_class_key bonding_netdev_xmit_lock_key;
 int bond_create(char *name, struct bond_params *params)
 {
 	struct net_device *bond_dev;
-	struct bonding *bond, *nxt;
+	struct bonding *bond;
 	int res;
 
 	rtnl_lock();
@@ -4859,7 +4856,7 @@ int bond_create(char *name, struct bond_params *params)
 
 	/* Check to see if the bond already exists. */
 	if (name) {
-		list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list)
+		list_for_each_entry(bond, &bond_dev_list, bond_list)
 			if (strnicmp(bond->dev->name, name, IFNAMSIZ) == 0) {
 				printk(KERN_ERR DRV_NAME
 			       ": cannot add bond %s; it already exists\n",
@@ -4931,7 +4928,7 @@ static int __init bonding_init(void)
 {
 	int i;
 	int res;
-	struct bonding *bond, *nxt;
+	struct bonding *bond;
 
 	printk(KERN_INFO "%s", version);
 
@@ -4961,7 +4958,7 @@ static int __init bonding_init(void)
 
 	goto out;
 err:
-	list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bond_dev_list, bond_list) {
 		bond_work_cancel_all(bond);
 		destroy_workqueue(bond->wq);
 	}
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 452a789bf2e..1f028579e53 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -111,7 +111,6 @@ static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t
 	char *ifname;
 	int rv, res = count;
 	struct bonding *bond;
-	struct bonding *nxt;
 
 	sscanf(buffer, "%16s", command); /* IFNAMSIZ*/
 	ifname = command + 1;
@@ -134,7 +133,7 @@ static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t
 		rtnl_lock();
 		down_write(&bonding_rwsem);
 
-		list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list)
+		list_for_each_entry(bond, &bond_dev_list, bond_list)
 			if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) {
 				/* check the ref count on the bond's kobject.
 				 * If it's > expected, then there's a file open,
-- 
cgit v1.2.3-18-g5258


From 8047637c70e4451e2ac1c17ed9a91a2f753daae7 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Sat, 17 May 2008 21:10:11 -0700
Subject: bonding: Remove unneeded list_empty checks.

Some places iterate over the checked list right after the check
itself, so even if the list is empty, the list_for_each_xxx
iterator will make everything right by himself.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/bonding/bond_main.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 5e3b942fb51..2a0039f1937 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2433,9 +2433,6 @@ static int bond_has_this_ip(struct bonding *bond, __be32 ip)
 	if (ip == bond->master_ip)
 		return 1;
 
-	if (list_empty(&bond->vlan_list))
-		return 0;
-
 	list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
 		if (ip == vlan->vlan_ip)
 			return 1;
@@ -3495,9 +3492,6 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event,
 			}
 		}
 
-		if (list_empty(&bond->vlan_list))
-			continue;
-
 		list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
 			vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
 			if (vlan_dev == event_dev) {
-- 
cgit v1.2.3-18-g5258


From 7893b2491a2d5f716540ac5643d78d37a7f6628b Mon Sep 17 00:00:00 2001
From: Moni Shoua <monis@voltaire.com>
Date: Sat, 17 May 2008 21:10:12 -0700
Subject: bonding: Send more than one gratuitous ARP when slave takes over

With IPoIB, reception of gratuitous ARP by neighboring hosts
is essential for a successful change of slaves in case of failure.
Otherwise, they won't learn about the HW address change and need
to wait a long time until the neighboring system gives up and sends
an ARP request to learn the new HW address.  This patch decreases
the chance for a lost of a gratuitous ARP packet by sending it more
than once. The number retries is configurable and can be set with a
module param.

Signed-off-by: Moni Shoua <monis@voltaire.com>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/bonding/bond_main.c  | 23 +++++++++++++++++++----
 drivers/net/bonding/bond_sysfs.c | 40 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/bonding/bonding.h    |  1 +
 3 files changed, 60 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2a0039f1937..fa3c2101fe7 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -88,6 +88,7 @@
 #define BOND_LINK_ARP_INTERV	0
 
 static int max_bonds	= BOND_DEFAULT_MAX_BONDS;
+static int num_grat_arp = 1;
 static int miimon	= BOND_LINK_MON_INTERV;
 static int updelay	= 0;
 static int downdelay	= 0;
@@ -104,6 +105,8 @@ struct bond_params bonding_defaults;
 
 module_param(max_bonds, int, 0);
 MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
+module_param(num_grat_arp, int, 0644);
+MODULE_PARM_DESC(num_grat_arp, "Number of gratuitous ARP packets to send on failover event");
 module_param(miimon, int, 0);
 MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
 module_param(updelay, int, 0);
@@ -1109,14 +1112,18 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 		if (new_active && bond->params.fail_over_mac)
 			memcpy(bond->dev->dev_addr,  new_active->dev->dev_addr,
 				new_active->dev->addr_len);
+		bond->send_grat_arp = bond->params.num_grat_arp;
 		if (bond->curr_active_slave &&
 			test_bit(__LINK_STATE_LINKWATCH_PENDING,
 					&bond->curr_active_slave->dev->state)) {
 			dprintk("delaying gratuitous arp on %s\n",
 				bond->curr_active_slave->dev->name);
-			bond->send_grat_arp = 1;
-		} else
-			bond_send_gratuitous_arp(bond);
+		} else {
+			if (bond->send_grat_arp > 0) {
+				bond_send_gratuitous_arp(bond);
+				bond->send_grat_arp--;
+			}
+		}
 	}
 }
 
@@ -2144,7 +2151,7 @@ static int __bond_mii_monitor(struct bonding *bond, int have_locks)
 			dprintk("sending delayed gratuitous arp on on %s\n",
 				bond->curr_active_slave->dev->name);
 			bond_send_gratuitous_arp(bond);
-			bond->send_grat_arp = 0;
+			bond->send_grat_arp--;
 		}
 	}
 	read_lock(&bond->curr_slave_lock);
@@ -4626,6 +4633,13 @@ static int bond_check_params(struct bond_params *params)
 		use_carrier = 1;
 	}
 
+	if (num_grat_arp < 0 || num_grat_arp > 255) {
+		printk(KERN_WARNING DRV_NAME
+		       ": Warning: num_grat_arp (%d) not in range 0-255 so it "
+		       "was reset to 1 \n", num_grat_arp);
+		num_grat_arp = 1;
+	}
+
 	/* reset values for 802.3ad */
 	if (bond_mode == BOND_MODE_8023AD) {
 		if (!miimon) {
@@ -4813,6 +4827,7 @@ static int bond_check_params(struct bond_params *params)
 	params->mode = bond_mode;
 	params->xmit_policy = xmit_hashtype;
 	params->miimon = miimon;
+	params->num_grat_arp = num_grat_arp;
 	params->arp_interval = arp_interval;
 	params->arp_validate = arp_validate_value;
 	params->updelay = updelay;
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 1f028579e53..7a61e9a1438 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -950,6 +950,45 @@ out:
 }
 static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp);
 
+/*
+ * Show and set the number of grat ARP to send after a failover event.
+ */
+static ssize_t bonding_show_n_grat_arp(struct device *d,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct bonding *bond = to_bond(d);
+
+	return sprintf(buf, "%d\n", bond->params.num_grat_arp);
+}
+
+static ssize_t bonding_store_n_grat_arp(struct device *d,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	int new_value, ret = count;
+	struct bonding *bond = to_bond(d);
+
+	if (sscanf(buf, "%d", &new_value) != 1) {
+		printk(KERN_ERR DRV_NAME
+		       ": %s: no num_grat_arp value specified.\n",
+		       bond->dev->name);
+		ret = -EINVAL;
+		goto out;
+	}
+	if (new_value < 0 || new_value > 255) {
+		printk(KERN_ERR DRV_NAME
+		       ": %s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
+		       bond->dev->name, new_value);
+		ret = -EINVAL;
+		goto out;
+	} else {
+		bond->params.num_grat_arp = new_value;
+	}
+out:
+	return ret;
+}
+static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR, bonding_show_n_grat_arp, bonding_store_n_grat_arp);
 /*
  * Show and set the MII monitor interval.  There are two tricky bits
  * here.  First, if MII monitoring is activated, then we must disable
@@ -1387,6 +1426,7 @@ static struct attribute *per_bond_attrs[] = {
 	&dev_attr_updelay.attr,
 	&dev_attr_lacp_rate.attr,
 	&dev_attr_xmit_hash_policy.attr,
+	&dev_attr_num_grat_arp.attr,
 	&dev_attr_miimon.attr,
 	&dev_attr_primary.attr,
 	&dev_attr_use_carrier.attr,
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 0ce7f4ae920..46a2ed507b3 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -125,6 +125,7 @@ struct bond_params {
 	int mode;
 	int xmit_policy;
 	int miimon;
+	int num_grat_arp;
 	int arp_interval;
 	int arp_validate;
 	int use_carrier;
-- 
cgit v1.2.3-18-g5258


From b2220cad583c9b63e085476df448fa2aff5ea906 Mon Sep 17 00:00:00 2001
From: Jay Vosburgh <fubar@us.ibm.com>
Date: Sat, 17 May 2008 21:10:13 -0700
Subject: bonding: refactor ARP active-backup monitor

	Refactor ARP monitor for active-backup mode.  The motivation for
this is to take care of locking issues in a clear manner (particularly to
correctly handle RTNL vs. the bonding locks).  Currently, the a-b ARP
monitor does not hold RTNL at all, but future changes will require RTNL
during ARP monitor failovers.

	Rather than using conditional locking, this patch instead breaks
up the ARP monitor into three discrete steps: inspection, commit changes,
and probe.  The inspection phase marks slaves that require link state
changes.  The commit phase is only called if inspection detects that
changes are needed, and is called with RTNL.  Lastly, the probe phase
issues the ARP probes that the inspection phase uses to determine link
state.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/bonding/bond_main.c | 427 +++++++++++++++++++++++-----------------
 drivers/net/bonding/bonding.h   |   6 +
 2 files changed, 248 insertions(+), 185 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index fa3c2101fe7..51e0f2de42c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1051,6 +1051,8 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 	}
 
 	if (new_active) {
+		new_active->jiffies = jiffies;
+
 		if (new_active->link == BOND_LINK_BACK) {
 			if (USES_PRIMARY(bond->params.mode)) {
 				printk(KERN_INFO DRV_NAME
@@ -1062,7 +1064,6 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 
 			new_active->delay = 0;
 			new_active->link = BOND_LINK_UP;
-			new_active->jiffies = jiffies;
 
 			if (bond->params.mode == BOND_MODE_8023AD) {
 				bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
@@ -2795,243 +2796,299 @@ out:
 }
 
 /*
- * When using arp monitoring in active-backup mode, this function is
- * called to determine if any backup slaves have went down or a new
- * current slave needs to be found.
- * The backup slaves never generate traffic, they are considered up by merely
- * receiving traffic. If the current slave goes down, each backup slave will
- * be given the opportunity to tx/rx an arp before being taken down - this
- * prevents all slaves from being taken down due to the current slave not
- * sending any traffic for the backups to receive. The arps are not necessarily
- * necessary, any tx and rx traffic will keep the current slave up. While any
- * rx traffic will keep the backup slaves up, the current slave is responsible
- * for generating traffic to keep them up regardless of any other traffic they
- * may have received.
- * see loadbalance_arp_monitor for arp monitoring in load balancing mode
+ * Called to inspect slaves for active-backup mode ARP monitor link state
+ * changes.  Sets new_link in slaves to specify what action should take
+ * place for the slave.  Returns 0 if no changes are found, >0 if changes
+ * to link states must be committed.
+ *
+ * Called with bond->lock held for read.
  */
-void bond_activebackup_arp_mon(struct work_struct *work)
+static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
 {
-	struct bonding *bond = container_of(work, struct bonding,
-					    arp_work.work);
 	struct slave *slave;
-	int delta_in_ticks;
-	int i;
+	int i, commit = 0;
 
-	read_lock(&bond->lock);
+	bond_for_each_slave(bond, slave, i) {
+		slave->new_link = BOND_LINK_NOCHANGE;
 
-	delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
+		if (slave->link != BOND_LINK_UP) {
+			if (time_before_eq(jiffies, slave_last_rx(bond, slave) +
+					   delta_in_ticks)) {
+				slave->new_link = BOND_LINK_UP;
+				commit++;
+			}
 
-	if (bond->kill_timers) {
-		goto out;
-	}
+			continue;
+		}
 
-	if (bond->slave_cnt == 0) {
-		goto re_arm;
+		/*
+		 * Give slaves 2*delta after being enslaved or made
+		 * active.  This avoids bouncing, as the last receive
+		 * times need a full ARP monitor cycle to be updated.
+		 */
+		if (!time_after_eq(jiffies, slave->jiffies +
+				   2 * delta_in_ticks))
+			continue;
+
+		/*
+		 * Backup slave is down if:
+		 * - No current_arp_slave AND
+		 * - more than 3*delta since last receive AND
+		 * - the bond has an IP address
+		 *
+		 * Note: a non-null current_arp_slave indicates
+		 * the curr_active_slave went down and we are
+		 * searching for a new one; under this condition
+		 * we only take the curr_active_slave down - this
+		 * gives each slave a chance to tx/rx traffic
+		 * before being taken out
+		 */
+		if (slave->state == BOND_STATE_BACKUP &&
+		    !bond->current_arp_slave &&
+		    time_after(jiffies, slave_last_rx(bond, slave) +
+			       3 * delta_in_ticks)) {
+			slave->new_link = BOND_LINK_DOWN;
+			commit++;
+		}
+
+		/*
+		 * Active slave is down if:
+		 * - more than 2*delta since transmitting OR
+		 * - (more than 2*delta since receive AND
+		 *    the bond has an IP address)
+		 */
+		if ((slave->state == BOND_STATE_ACTIVE) &&
+		    (time_after_eq(jiffies, slave->dev->trans_start +
+				    2 * delta_in_ticks) ||
+		      (time_after_eq(jiffies, slave_last_rx(bond, slave)
+				     + 2 * delta_in_ticks)))) {
+			slave->new_link = BOND_LINK_DOWN;
+			commit++;
+		}
 	}
 
-	/* determine if any slave has come up or any backup slave has
-	 * gone down
-	 * TODO: what about up/down delay in arp mode? it wasn't here before
-	 *       so it can wait
+	read_lock(&bond->curr_slave_lock);
+
+	/*
+	 * Trigger a commit if the primary option setting has changed.
 	 */
-	bond_for_each_slave(bond, slave, i) {
-		if (slave->link != BOND_LINK_UP) {
-			if (time_before_eq(jiffies,
-			    slave_last_rx(bond, slave) + delta_in_ticks)) {
+	if (bond->primary_slave &&
+	    (bond->primary_slave != bond->curr_active_slave) &&
+	    (bond->primary_slave->link == BOND_LINK_UP))
+		commit++;
 
-				slave->link = BOND_LINK_UP;
+	read_unlock(&bond->curr_slave_lock);
 
-				write_lock_bh(&bond->curr_slave_lock);
+	return commit;
+}
 
-				if ((!bond->curr_active_slave) &&
-				    time_before_eq(jiffies, slave->dev->trans_start + delta_in_ticks)) {
-					bond_change_active_slave(bond, slave);
-					bond->current_arp_slave = NULL;
-				} else if (bond->curr_active_slave != slave) {
-					/* this slave has just come up but we
-					 * already have a current slave; this
-					 * can also happen if bond_enslave adds
-					 * a new slave that is up while we are
-					 * searching for a new slave
-					 */
-					bond_set_slave_inactive_flags(slave);
-					bond->current_arp_slave = NULL;
-				}
+/*
+ * Called to commit link state changes noted by inspection step of
+ * active-backup mode ARP monitor.
+ *
+ * Called with RTNL and bond->lock for read.
+ */
+static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
+{
+	struct slave *slave;
+	int i;
 
-				bond_set_carrier(bond);
+	bond_for_each_slave(bond, slave, i) {
+		switch (slave->new_link) {
+		case BOND_LINK_NOCHANGE:
+			continue;
 
-				if (slave == bond->curr_active_slave) {
-					printk(KERN_INFO DRV_NAME
-					       ": %s: %s is up and now the "
-					       "active interface\n",
-					       bond->dev->name,
-					       slave->dev->name);
-					netif_carrier_on(bond->dev);
-				} else {
-					printk(KERN_INFO DRV_NAME
-					       ": %s: backup interface %s is "
-					       "now up\n",
-					       bond->dev->name,
-					       slave->dev->name);
-				}
+		case BOND_LINK_UP:
+			write_lock_bh(&bond->curr_slave_lock);
 
-				write_unlock_bh(&bond->curr_slave_lock);
-			}
-		} else {
-			read_lock(&bond->curr_slave_lock);
+			if (!bond->curr_active_slave &&
+			    time_before_eq(jiffies, slave->dev->trans_start +
+					   delta_in_ticks)) {
+				slave->link = BOND_LINK_UP;
+				bond_change_active_slave(bond, slave);
+				bond->current_arp_slave = NULL;
 
-			if ((slave != bond->curr_active_slave) &&
-			    (!bond->current_arp_slave) &&
-			    (time_after_eq(jiffies, slave_last_rx(bond, slave) + 3*delta_in_ticks))) {
-				/* a backup slave has gone down; three times
-				 * the delta allows the current slave to be
-				 * taken out before the backup slave.
-				 * note: a non-null current_arp_slave indicates
-				 * the curr_active_slave went down and we are
-				 * searching for a new one; under this
-				 * condition we only take the curr_active_slave
-				 * down - this gives each slave a chance to
-				 * tx/rx traffic before being taken out
+				printk(KERN_INFO DRV_NAME
+				       ": %s: %s is up and now the "
+				       "active interface\n",
+				       bond->dev->name, slave->dev->name);
+
+			} else if (bond->curr_active_slave != slave) {
+				/* this slave has just come up but we
+				 * already have a current slave; this can
+				 * also happen if bond_enslave adds a new
+				 * slave that is up while we are searching
+				 * for a new slave
 				 */
+				slave->link = BOND_LINK_UP;
+				bond_set_slave_inactive_flags(slave);
+				bond->current_arp_slave = NULL;
+
+				printk(KERN_INFO DRV_NAME
+				       ": %s: backup interface %s is now up\n",
+				       bond->dev->name, slave->dev->name);
+			}
 
-				read_unlock(&bond->curr_slave_lock);
+			write_unlock_bh(&bond->curr_slave_lock);
 
-				slave->link  = BOND_LINK_DOWN;
+			break;
 
-				if (slave->link_failure_count < UINT_MAX) {
-					slave->link_failure_count++;
-				}
+		case BOND_LINK_DOWN:
+			if (slave->link_failure_count < UINT_MAX)
+				slave->link_failure_count++;
+
+			slave->link = BOND_LINK_DOWN;
+
+			if (slave == bond->curr_active_slave) {
+				printk(KERN_INFO DRV_NAME
+				       ": %s: link status down for active "
+				       "interface %s, disabling it\n",
+				       bond->dev->name, slave->dev->name);
 
 				bond_set_slave_inactive_flags(slave);
 
+				write_lock_bh(&bond->curr_slave_lock);
+
+				bond_select_active_slave(bond);
+				if (bond->curr_active_slave)
+					bond->curr_active_slave->jiffies =
+						jiffies;
+
+				write_unlock_bh(&bond->curr_slave_lock);
+
+				bond->current_arp_slave = NULL;
+
+			} else if (slave->state == BOND_STATE_BACKUP) {
 				printk(KERN_INFO DRV_NAME
 				       ": %s: backup interface %s is now down\n",
-				       bond->dev->name,
-				       slave->dev->name);
-			} else {
-				read_unlock(&bond->curr_slave_lock);
+				       bond->dev->name, slave->dev->name);
+
+				bond_set_slave_inactive_flags(slave);
 			}
+			break;
+
+		default:
+			printk(KERN_ERR DRV_NAME
+			       ": %s: impossible: new_link %d on slave %s\n",
+			       bond->dev->name, slave->new_link,
+			       slave->dev->name);
 		}
 	}
 
-	read_lock(&bond->curr_slave_lock);
-	slave = bond->curr_active_slave;
-	read_unlock(&bond->curr_slave_lock);
-
-	if (slave) {
-		/* if we have sent traffic in the past 2*arp_intervals but
-		 * haven't xmit and rx traffic in that time interval, select
-		 * a different slave. slave->jiffies is only updated when
-		 * a slave first becomes the curr_active_slave - not necessarily
-		 * after every arp; this ensures the slave has a full 2*delta
-		 * before being taken out. if a primary is being used, check
-		 * if it is up and needs to take over as the curr_active_slave
-		 */
-		if ((time_after_eq(jiffies, slave->dev->trans_start + 2*delta_in_ticks) ||
-		     (time_after_eq(jiffies, slave_last_rx(bond, slave) + 2*delta_in_ticks))) &&
-			time_after_eq(jiffies, slave->jiffies + 2*delta_in_ticks)) {
+	/*
+	 * No race with changes to primary via sysfs, as we hold rtnl.
+	 */
+	if (bond->primary_slave &&
+	    (bond->primary_slave != bond->curr_active_slave) &&
+	    (bond->primary_slave->link == BOND_LINK_UP)) {
+		write_lock_bh(&bond->curr_slave_lock);
+		bond_change_active_slave(bond, bond->primary_slave);
+		write_unlock_bh(&bond->curr_slave_lock);
+	}
 
-			slave->link  = BOND_LINK_DOWN;
+	bond_set_carrier(bond);
+}
 
-			if (slave->link_failure_count < UINT_MAX) {
-				slave->link_failure_count++;
-			}
+/*
+ * Send ARP probes for active-backup mode ARP monitor.
+ *
+ * Called with bond->lock held for read.
+ */
+static void bond_ab_arp_probe(struct bonding *bond)
+{
+	struct slave *slave;
+	int i;
 
-			printk(KERN_INFO DRV_NAME
-			       ": %s: link status down for active interface "
-			       "%s, disabling it\n",
-			       bond->dev->name,
-			       slave->dev->name);
+	read_lock(&bond->curr_slave_lock);
 
-			write_lock_bh(&bond->curr_slave_lock);
+	if (bond->current_arp_slave && bond->curr_active_slave)
+		printk("PROBE: c_arp %s && cas %s BAD\n",
+		       bond->current_arp_slave->dev->name,
+		       bond->curr_active_slave->dev->name);
 
-			bond_select_active_slave(bond);
-			slave = bond->curr_active_slave;
+	if (bond->curr_active_slave) {
+		bond_arp_send_all(bond, bond->curr_active_slave);
+		read_unlock(&bond->curr_slave_lock);
+		return;
+	}
 
-			write_unlock_bh(&bond->curr_slave_lock);
+	read_unlock(&bond->curr_slave_lock);
 
-			bond->current_arp_slave = slave;
+	/* if we don't have a curr_active_slave, search for the next available
+	 * backup slave from the current_arp_slave and make it the candidate
+	 * for becoming the curr_active_slave
+	 */
 
-			if (slave) {
-				slave->jiffies = jiffies;
-			}
-		} else if ((bond->primary_slave) &&
-			   (bond->primary_slave != slave) &&
-			   (bond->primary_slave->link == BOND_LINK_UP)) {
-			/* at this point, slave is the curr_active_slave */
-			printk(KERN_INFO DRV_NAME
-			       ": %s: changing from interface %s to primary "
-			       "interface %s\n",
-			       bond->dev->name,
-			       slave->dev->name,
-			       bond->primary_slave->dev->name);
+	if (!bond->current_arp_slave) {
+		bond->current_arp_slave = bond->first_slave;
+		if (!bond->current_arp_slave)
+			return;
+	}
 
-			/* primary is up so switch to it */
-			write_lock_bh(&bond->curr_slave_lock);
-			bond_change_active_slave(bond, bond->primary_slave);
-			write_unlock_bh(&bond->curr_slave_lock);
+	bond_set_slave_inactive_flags(bond->current_arp_slave);
 
-			slave = bond->primary_slave;
+	/* search for next candidate */
+	bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) {
+		if (IS_UP(slave->dev)) {
+			slave->link = BOND_LINK_BACK;
+			bond_set_slave_active_flags(slave);
+			bond_arp_send_all(bond, slave);
 			slave->jiffies = jiffies;
-		} else {
-			bond->current_arp_slave = NULL;
+			bond->current_arp_slave = slave;
+			break;
 		}
 
-		/* the current slave must tx an arp to ensure backup slaves
-		 * rx traffic
+		/* if the link state is up at this point, we
+		 * mark it down - this can happen if we have
+		 * simultaneous link failures and
+		 * reselect_active_interface doesn't make this
+		 * one the current slave so it is still marked
+		 * up when it is actually down
 		 */
-		if (slave && IS_UP(slave->dev))
-			bond_arp_send_all(bond, slave);
-	}
+		if (slave->link == BOND_LINK_UP) {
+			slave->link = BOND_LINK_DOWN;
+			if (slave->link_failure_count < UINT_MAX)
+				slave->link_failure_count++;
 
-	/* if we don't have a curr_active_slave, search for the next available
-	 * backup slave from the current_arp_slave and make it the candidate
-	 * for becoming the curr_active_slave
-	 */
-	if (!slave) {
-		if (!bond->current_arp_slave) {
-			bond->current_arp_slave = bond->first_slave;
+			bond_set_slave_inactive_flags(slave);
+
+			printk(KERN_INFO DRV_NAME
+			       ": %s: backup interface %s is now down.\n",
+			       bond->dev->name, slave->dev->name);
 		}
+	}
+}
 
-		if (bond->current_arp_slave) {
-			bond_set_slave_inactive_flags(bond->current_arp_slave);
+void bond_activebackup_arp_mon(struct work_struct *work)
+{
+	struct bonding *bond = container_of(work, struct bonding,
+					    arp_work.work);
+	int delta_in_ticks;
 
-			/* search for next candidate */
-			bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) {
-				if (IS_UP(slave->dev)) {
-					slave->link = BOND_LINK_BACK;
-					bond_set_slave_active_flags(slave);
-					bond_arp_send_all(bond, slave);
-					slave->jiffies = jiffies;
-					bond->current_arp_slave = slave;
-					break;
-				}
+	read_lock(&bond->lock);
 
-				/* if the link state is up at this point, we
-				 * mark it down - this can happen if we have
-				 * simultaneous link failures and
-				 * reselect_active_interface doesn't make this
-				 * one the current slave so it is still marked
-				 * up when it is actually down
-				 */
-				if (slave->link == BOND_LINK_UP) {
-					slave->link  = BOND_LINK_DOWN;
-					if (slave->link_failure_count < UINT_MAX) {
-						slave->link_failure_count++;
-					}
+	if (bond->kill_timers)
+		goto out;
 
-					bond_set_slave_inactive_flags(slave);
+	delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
 
-					printk(KERN_INFO DRV_NAME
-					       ": %s: backup interface %s is "
-					       "now down.\n",
-					       bond->dev->name,
-					       slave->dev->name);
-				}
-			}
-		}
+	if (bond->slave_cnt == 0)
+		goto re_arm;
+
+	if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
+		read_unlock(&bond->lock);
+		rtnl_lock();
+		read_lock(&bond->lock);
+
+		bond_ab_arp_commit(bond, delta_in_ticks);
+
+		read_unlock(&bond->lock);
+		rtnl_unlock();
+		read_lock(&bond->lock);
 	}
 
+	bond_ab_arp_probe(bond);
+
 re_arm:
 	if (bond->params.arp_interval) {
 		queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 46a2ed507b3..8766b121369 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -158,6 +158,7 @@ struct slave {
 	unsigned long jiffies;
 	unsigned long last_arp_rx;
 	s8     link;    /* one of BOND_LINK_XXXX */
+	s8     new_link;
 	s8     state;   /* one of BOND_STATE_XXXX */
 	u32    original_flags;
 	u32    original_mtu;
@@ -169,6 +170,11 @@ struct slave {
 	struct tlb_slave_info tlb_info;
 };
 
+/*
+ * Link pseudo-state only used internally by monitors
+ */
+#define BOND_LINK_NOCHANGE -1
+
 /*
  * Here are the locking policies for the two bonding locks:
  *
-- 
cgit v1.2.3-18-g5258


From 3915c1e8634a321d9680e5cd80a53053b642dc0c Mon Sep 17 00:00:00 2001
From: Jay Vosburgh <fubar@us.ibm.com>
Date: Sat, 17 May 2008 21:10:14 -0700
Subject: bonding: Add "follow" option to fail_over_mac

	Add a "follow" selection for fail_over_mac.  This option
causes the MAC address to move from slave to slave as the active
slave changes.  This is in addition to the existing fail_over_mac option
that causes the bond's MAC address to change during failover.

	This new option is useful for devices that cannot tolerate
multiple ports using the same MAC address simultaneously, either
because it confuses them or incurs a performance penalty (as is the
case with some LPAR-aware multiport devices).  Because the MAC of the
bond itself does not change, the "follow" option is slightly more
reliable during failover and doesn't change the MAC of the bond during
operation.

	This patch requires a previous ARP monitor change to properly
handle RTNL during failovers.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/bonding/bond_main.c  | 185 ++++++++++++++++++++++++++++++---------
 drivers/net/bonding/bond_sysfs.c |  36 ++++----
 drivers/net/bonding/bonding.h    |   4 +
 3 files changed, 165 insertions(+), 60 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 51e0f2de42c..5b4af3cc2a4 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -100,7 +100,7 @@ static char *xmit_hash_policy = NULL;
 static int arp_interval = BOND_LINK_ARP_INTERV;
 static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, };
 static char *arp_validate = NULL;
-static int fail_over_mac = 0;
+static char *fail_over_mac = NULL;
 struct bond_params bonding_defaults;
 
 module_param(max_bonds, int, 0);
@@ -136,8 +136,8 @@ module_param_array(arp_ip_target, charp, NULL, 0);
 MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
 module_param(arp_validate, charp, 0);
 MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all");
-module_param(fail_over_mac, int, 0);
-MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC.  0 of off (default), 1 for on.");
+module_param(fail_over_mac, charp, 0);
+MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC.  none (default), active or follow");
 
 /*----------------------------- Global variables ----------------------------*/
 
@@ -190,6 +190,13 @@ struct bond_parm_tbl arp_validate_tbl[] = {
 {	NULL,			-1},
 };
 
+struct bond_parm_tbl fail_over_mac_tbl[] = {
+{	"none",			BOND_FOM_NONE},
+{	"active",		BOND_FOM_ACTIVE},
+{	"follow",		BOND_FOM_FOLLOW},
+{	NULL,			-1},
+};
+
 /*-------------------------- Forward declarations ---------------------------*/
 
 static void bond_send_gratuitous_arp(struct bonding *bond);
@@ -973,6 +980,82 @@ static void bond_mc_swap(struct bonding *bond, struct slave *new_active, struct
 	}
 }
 
+/*
+ * bond_do_fail_over_mac
+ *
+ * Perform special MAC address swapping for fail_over_mac settings
+ *
+ * Called with RTNL, bond->lock for read, curr_slave_lock for write_bh.
+ */
+static void bond_do_fail_over_mac(struct bonding *bond,
+				  struct slave *new_active,
+				  struct slave *old_active)
+{
+	u8 tmp_mac[ETH_ALEN];
+	struct sockaddr saddr;
+	int rv;
+
+	switch (bond->params.fail_over_mac) {
+	case BOND_FOM_ACTIVE:
+		if (new_active)
+			memcpy(bond->dev->dev_addr,  new_active->dev->dev_addr,
+			       new_active->dev->addr_len);
+		break;
+	case BOND_FOM_FOLLOW:
+		/*
+		 * if new_active && old_active, swap them
+		 * if just old_active, do nothing (going to no active slave)
+		 * if just new_active, set new_active to bond's MAC
+		 */
+		if (!new_active)
+			return;
+
+		write_unlock_bh(&bond->curr_slave_lock);
+		read_unlock(&bond->lock);
+
+		if (old_active) {
+			memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
+			memcpy(saddr.sa_data, old_active->dev->dev_addr,
+			       ETH_ALEN);
+			saddr.sa_family = new_active->dev->type;
+		} else {
+			memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN);
+			saddr.sa_family = bond->dev->type;
+		}
+
+		rv = dev_set_mac_address(new_active->dev, &saddr);
+		if (rv) {
+			printk(KERN_ERR DRV_NAME
+			       ": %s: Error %d setting MAC of slave %s\n",
+			       bond->dev->name, -rv, new_active->dev->name);
+			goto out;
+		}
+
+		if (!old_active)
+			goto out;
+
+		memcpy(saddr.sa_data, tmp_mac, ETH_ALEN);
+		saddr.sa_family = old_active->dev->type;
+
+		rv = dev_set_mac_address(old_active->dev, &saddr);
+		if (rv)
+			printk(KERN_ERR DRV_NAME
+			       ": %s: Error %d setting MAC of slave %s\n",
+			       bond->dev->name, -rv, new_active->dev->name);
+out:
+		read_lock(&bond->lock);
+		write_lock_bh(&bond->curr_slave_lock);
+		break;
+	default:
+		printk(KERN_ERR DRV_NAME
+		       ": %s: bond_do_fail_over_mac impossible: bad policy %d\n",
+		       bond->dev->name, bond->params.fail_over_mac);
+		break;
+	}
+
+}
+
+
 /**
  * find_best_interface - select the best available slave to be the active one
  * @bond: our bonding struct
@@ -1040,7 +1123,8 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
  * because it is apparently the best available slave we have, even though its
  * updelay hasn't timed out yet.
  *
- * Warning: Caller must hold curr_slave_lock for writing.
+ * If new_active is not NULL, caller must hold bond->lock for read and
+ * curr_slave_lock for write_bh.
  */
 void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 {
@@ -1107,12 +1191,9 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 			bond_set_slave_active_flags(new_active);
 		}
 
-		/* when bonding does not set the slave MAC address, the bond MAC
-		 * address is the one of the active slave.
-		 */
 		if (new_active && bond->params.fail_over_mac)
-			memcpy(bond->dev->dev_addr,  new_active->dev->dev_addr,
-				new_active->dev->addr_len);
+			bond_do_fail_over_mac(bond, new_active, old_active);
+
 		bond->send_grat_arp = bond->params.num_grat_arp;
 		if (bond->curr_active_slave &&
 			test_bit(__LINK_STATE_LINKWATCH_PENDING,
@@ -1137,7 +1218,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
  * - The primary_slave has got its link back.
  * - A slave has got its link back and there's no old curr_active_slave.
  *
- * Warning: Caller must hold curr_slave_lock for writing.
+ * Caller must hold bond->lock for read and curr_slave_lock for write_bh.
  */
 void bond_select_active_slave(struct bonding *bond)
 {
@@ -1384,14 +1465,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 			printk(KERN_WARNING DRV_NAME
 			       ": %s: Warning: The first slave device "
 			       "specified does not support setting the MAC "
-			       "address. Enabling the fail_over_mac option.",
+			       "address. Setting fail_over_mac to active.",
 			       bond_dev->name);
-			bond->params.fail_over_mac = 1;
-		} else if (!bond->params.fail_over_mac) {
+			bond->params.fail_over_mac = BOND_FOM_ACTIVE;
+		} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
 			printk(KERN_ERR DRV_NAME
 				": %s: Error: The slave device specified "
 				"does not support setting the MAC address, "
-				"but fail_over_mac is not enabled.\n"
+				"but fail_over_mac is not set to active.\n"
 				, bond_dev->name);
 			res = -EOPNOTSUPP;
 			goto err_undo_flags;
@@ -1498,6 +1579,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	bond_compute_features(bond);
 
+	write_unlock_bh(&bond->lock);
+
+	read_lock(&bond->lock);
+
 	new_slave->last_arp_rx = jiffies;
 
 	if (bond->params.miimon && !bond->params.use_carrier) {
@@ -1574,6 +1659,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		}
 	}
 
+	write_lock_bh(&bond->curr_slave_lock);
+
 	switch (bond->params.mode) {
 	case BOND_MODE_ACTIVEBACKUP:
 		bond_set_slave_inactive_flags(new_slave);
@@ -1621,9 +1708,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		break;
 	} /* switch(bond_mode) */
 
+	write_unlock_bh(&bond->curr_slave_lock);
+
 	bond_set_carrier(bond);
 
-	write_unlock_bh(&bond->lock);
+	read_unlock(&bond->lock);
 
 	res = bond_create_slave_symlinks(bond_dev, slave_dev);
 	if (res)
@@ -1647,6 +1736,10 @@ err_unset_master:
 
 err_restore_mac:
 	if (!bond->params.fail_over_mac) {
+		/* XXX TODO - fom follow mode needs to change master's
+		 * MAC if this slave's MAC is in use by the bond, or at
+		 * least print a warning.
+		 */
 		memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
 		addr.sa_family = slave_dev->type;
 		dev_set_mac_address(slave_dev, &addr);
@@ -1701,20 +1794,18 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		return -EINVAL;
 	}
 
-	mac_addr_differ = memcmp(bond_dev->dev_addr,
-				 slave->perm_hwaddr,
-				 ETH_ALEN);
-	if (!mac_addr_differ && (bond->slave_cnt > 1)) {
-		printk(KERN_WARNING DRV_NAME
-		       ": %s: Warning: the permanent HWaddr of %s - "
-		       "%s - is still in use by %s. "
-		       "Set the HWaddr of %s to a different address "
-		       "to avoid conflicts.\n",
-		       bond_dev->name,
-		       slave_dev->name,
-		       print_mac(mac, slave->perm_hwaddr),
-		       bond_dev->name,
-		       slave_dev->name);
+	if (!bond->params.fail_over_mac) {
+		mac_addr_differ = memcmp(bond_dev->dev_addr, slave->perm_hwaddr,
+					 ETH_ALEN);
+		if (!mac_addr_differ && (bond->slave_cnt > 1))
+			printk(KERN_WARNING DRV_NAME
+			       ": %s: Warning: the permanent HWaddr of %s - "
+			       "%s - is still in use by %s. "
+			       "Set the HWaddr of %s to a different address "
+			       "to avoid conflicts.\n",
+			       bond_dev->name, slave_dev->name,
+			       print_mac(mac, slave->perm_hwaddr),
+			       bond_dev->name, slave_dev->name);
 	}
 
 	/* Inform AD package of unbinding of slave. */
@@ -1841,7 +1932,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	/* close slave before restoring its mac address */
 	dev_close(slave_dev);
 
-	if (!bond->params.fail_over_mac) {
+	if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
 		/* restore original ("permanent") mac address */
 		memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
 		addr.sa_family = slave_dev->type;
@@ -3164,7 +3255,8 @@ static void bond_info_show_master(struct seq_file *seq)
 
 	if (bond->params.mode == BOND_MODE_ACTIVEBACKUP &&
 	    bond->params.fail_over_mac)
-		seq_printf(seq, " (fail_over_mac)");
+		seq_printf(seq, " (fail_over_mac %s)",
+		   fail_over_mac_tbl[bond->params.fail_over_mac].modename);
 
 	seq_printf(seq, "\n");
 
@@ -4092,10 +4184,10 @@ static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
 	dprintk("bond=%p, name=%s\n", bond, (bond_dev ? bond_dev->name : "None"));
 
 	/*
-	 * If fail_over_mac is enabled, do nothing and return success.
-	 * Returning an error causes ifenslave to fail.
+	 * If fail_over_mac is set to active, do nothing and return
+	 * success.  Returning an error causes ifenslave to fail.
 	 */
-	if (bond->params.fail_over_mac)
+	if (bond->params.fail_over_mac == BOND_FOM_ACTIVE)
 		return 0;
 
 	if (!is_valid_ether_addr(sa->sa_data)) {
@@ -4600,7 +4692,7 @@ int bond_parse_parm(const char *buf, struct bond_parm_tbl *tbl)
 
 static int bond_check_params(struct bond_params *params)
 {
-	int arp_validate_value;
+	int arp_validate_value, fail_over_mac_value;
 
 	/*
 	 * Convert string parameters.
@@ -4875,10 +4967,23 @@ static int bond_check_params(struct bond_params *params)
 		primary = NULL;
 	}
 
-	if (fail_over_mac && (bond_mode != BOND_MODE_ACTIVEBACKUP))
-		printk(KERN_WARNING DRV_NAME
-		       ": Warning: fail_over_mac only affects "
-		       "active-backup mode.\n");
+	if (fail_over_mac) {
+		fail_over_mac_value = bond_parse_parm(fail_over_mac,
+						      fail_over_mac_tbl);
+		if (fail_over_mac_value == -1) {
+			printk(KERN_ERR DRV_NAME
+			       ": Error: invalid fail_over_mac \"%s\"\n",
+			       arp_validate == NULL ? "NULL" : arp_validate);
+			return -EINVAL;
+		}
+
+		if (bond_mode != BOND_MODE_ACTIVEBACKUP)
+			printk(KERN_WARNING DRV_NAME
+			       ": Warning: fail_over_mac only affects "
+			       "active-backup mode.\n");
+	} else {
+		fail_over_mac_value = BOND_FOM_NONE;
+	}
 
 	/* fill params struct with the proper values */
 	params->mode = bond_mode;
@@ -4892,7 +4997,7 @@ static int bond_check_params(struct bond_params *params)
 	params->use_carrier = use_carrier;
 	params->lacp_fast = lacp_fast;
 	params->primary[0] = 0;
-	params->fail_over_mac = fail_over_mac;
+	params->fail_over_mac = fail_over_mac_value;
 
 	if (primary) {
 		strncpy(params->primary, primary, IFNAMSIZ);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 7a61e9a1438..dd265c69b0d 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -50,6 +50,7 @@ extern struct bond_parm_tbl bond_mode_tbl[];
 extern struct bond_parm_tbl bond_lacp_tbl[];
 extern struct bond_parm_tbl xmit_hashtype_tbl[];
 extern struct bond_parm_tbl arp_validate_tbl[];
+extern struct bond_parm_tbl fail_over_mac_tbl[];
 
 static int expected_refcount = -1;
 static struct class *netdev_class;
@@ -547,42 +548,37 @@ static ssize_t bonding_show_fail_over_mac(struct device *d, struct device_attrib
 {
 	struct bonding *bond = to_bond(d);
 
-	return sprintf(buf, "%d\n", bond->params.fail_over_mac) + 1;
+	return sprintf(buf, "%s %d\n",
+		       fail_over_mac_tbl[bond->params.fail_over_mac].modename,
+		       bond->params.fail_over_mac);
 }
 
 static ssize_t bonding_store_fail_over_mac(struct device *d, struct device_attribute *attr, const char *buf, size_t count)
 {
 	int new_value;
-	int ret = count;
 	struct bonding *bond = to_bond(d);
 
 	if (bond->slave_cnt != 0) {
 		printk(KERN_ERR DRV_NAME
 		       ": %s: Can't alter fail_over_mac with slaves in bond.\n",
 		       bond->dev->name);
-		ret = -EPERM;
-		goto out;
+		return -EPERM;
 	}
 
-	if (sscanf(buf, "%d", &new_value) != 1) {
+	new_value = bond_parse_parm(buf, fail_over_mac_tbl);
+	if (new_value < 0) {
 		printk(KERN_ERR DRV_NAME
-		       ": %s: no fail_over_mac value specified.\n",
-		       bond->dev->name);
-		ret = -EINVAL;
-		goto out;
+		       ": %s: Ignoring invalid fail_over_mac value %s.\n",
+		       bond->dev->name, buf);
+		return -EINVAL;
 	}
 
-	if ((new_value == 0) || (new_value == 1)) {
-		bond->params.fail_over_mac = new_value;
-		printk(KERN_INFO DRV_NAME ": %s: Setting fail_over_mac to %d.\n",
-		       bond->dev->name, new_value);
-	} else {
-		printk(KERN_INFO DRV_NAME
-		       ": %s: Ignoring invalid fail_over_mac value %d.\n",
-		       bond->dev->name, new_value);
-	}
-out:
-	return ret;
+	bond->params.fail_over_mac = new_value;
+	printk(KERN_INFO DRV_NAME ": %s: Setting fail_over_mac to %s (%d).\n",
+	       bond->dev->name, fail_over_mac_tbl[new_value].modename,
+	       new_value);
+
+	return count;
 }
 
 static DEVICE_ATTR(fail_over_mac, S_IRUGO | S_IWUSR, bonding_show_fail_over_mac, bonding_store_fail_over_mac);
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 8766b121369..89fd9963db7 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -248,6 +248,10 @@ static inline struct bonding *bond_get_bond_by_slave(struct slave *slave)
 	return (struct bonding *)slave->dev->master->priv;
 }
 
+#define BOND_FOM_NONE			0
+#define BOND_FOM_ACTIVE			1
+#define BOND_FOM_FOLLOW			2
+
 #define BOND_ARP_VALIDATE_NONE		0
 #define BOND_ARP_VALIDATE_ACTIVE	(1 << BOND_STATE_ACTIVE)
 #define BOND_ARP_VALIDATE_BACKUP	(1 << BOND_STATE_BACKUP)
-- 
cgit v1.2.3-18-g5258


From cd9af3dac6d1ad001b2d5d912dbd49e184d23b9d Mon Sep 17 00:00:00 2001
From: Nate Case <ncase@xes-inc.com>
Date: Sat, 17 May 2008 06:40:39 +0100
Subject: PHYLIB: Add 1000Base-X support for Broadcom bcm5482

Configure the BCM5482S secondary SerDes for 1000Base-X mode when the
appropriate dev_flags are passed in to phy_connect().  This is
needed when the PHY is used for fiber and backplane connections.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/phy/broadcom.c | 201 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 199 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 60c5cfe9691..4b4dc98ad16 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -24,6 +24,12 @@
 #define MII_BCM54XX_ESR		0x11	/* BCM54xx extended status register */
 #define MII_BCM54XX_ESR_IS	0x1000	/* Interrupt status */
 
+#define MII_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
+#define MII_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
+#define MII_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
+#define MII_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
+
+#define MII_BCM54XX_AUX_CTL	0x18	/* Auxiliary control register */
 #define MII_BCM54XX_ISR		0x1a	/* BCM54xx interrupt status register */
 #define MII_BCM54XX_IMR		0x1b	/* BCM54xx interrupt mask register */
 #define MII_BCM54XX_INT_CRCERR	0x0001	/* CRC error */
@@ -42,10 +48,120 @@
 #define MII_BCM54XX_INT_MDIX	0x2000	/* MDIX status change */
 #define MII_BCM54XX_INT_PSERR	0x4000	/* Pair swap error */
 
+#define MII_BCM54XX_SHD		0x1c	/* 0x1c shadow registers */
+#define MII_BCM54XX_SHD_WRITE	0x8000
+#define MII_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
+#define MII_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
+
+/*
+ * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
+ * BCM5482, and possibly some others.
+ */
+#define BCM_LED_SRC_LINKSPD1	0x0
+#define BCM_LED_SRC_LINKSPD2	0x1
+#define BCM_LED_SRC_XMITLED	0x2
+#define BCM_LED_SRC_ACTIVITYLED	0x3
+#define BCM_LED_SRC_FDXLED	0x4
+#define BCM_LED_SRC_SLAVE	0x5
+#define BCM_LED_SRC_INTR	0x6
+#define BCM_LED_SRC_QUALITY	0x7
+#define BCM_LED_SRC_RCVLED	0x8
+#define BCM_LED_SRC_MULTICOLOR1	0xa
+#define BCM_LED_SRC_OPENSHORT	0xb
+#define BCM_LED_SRC_OFF		0xe	/* Tied high */
+#define BCM_LED_SRC_ON		0xf	/* Tied low */
+
+/*
+ * BCM5482: Shadow registers
+ * Shadow values go into bits [14:10] of register 0x1c to select a shadow
+ * register to access.
+ */
+#define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
+					/* LED3 / ~LINKSPD[2] selector */
+#define BCM5482_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
+					/* LED1 / ~LINKSPD[1] selector */
+#define BCM5482_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
+#define BCM5482_SHD_SSD		0x14	/* 10100: Secondary SerDes control */
+#define BCM5482_SHD_SSD_LEDM	0x0008	/* SSD LED Mode enable */
+#define BCM5482_SHD_SSD_EN	0x0001	/* SSD enable */
+#define BCM5482_SHD_MODE	0x1f	/* 11111: Mode Control Register */
+#define BCM5482_SHD_MODE_1000BX	0x0001	/* Enable 1000BASE-X registers */
+
+/*
+ * BCM5482: Secondary SerDes registers
+ */
+#define BCM5482_SSD_1000BX_CTL		0x00	/* 1000BASE-X Control */
+#define BCM5482_SSD_1000BX_CTL_PWRDOWN	0x0800	/* Power-down SSD */
+#define BCM5482_SSD_SGMII_SLAVE		0x15	/* SGMII Slave Register */
+#define BCM5482_SSD_SGMII_SLAVE_EN	0x0002	/* Slave mode enable */
+#define BCM5482_SSD_SGMII_SLAVE_AD	0x0001	/* Slave auto-detection */
+
+/*
+ * Device flags for PHYs that can be configured for different operating
+ * modes.
+ */
+#define PHY_BCM_FLAGS_VALID		0x80000000
+#define PHY_BCM_FLAGS_INTF_XAUI		0x00000020
+#define PHY_BCM_FLAGS_INTF_SGMII	0x00000010
+#define PHY_BCM_FLAGS_MODE_1000BX	0x00000002
+#define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
+
 MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
+/*
+ * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
+ * 0x1c shadow registers.
+ */
+static int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
+{
+	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
+	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
+}
+
+static int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, u16 val)
+{
+	return phy_write(phydev, MII_BCM54XX_SHD,
+			 MII_BCM54XX_SHD_WRITE |
+			 MII_BCM54XX_SHD_VAL(shadow) |
+			 MII_BCM54XX_SHD_DATA(val));
+}
+
+/*
+ * Indirect register access functions for the Expansion Registers
+ * and Secondary SerDes registers (when sec_serdes=1).
+ */
+static int bcm54xx_exp_read(struct phy_device *phydev,
+			    int sec_serdes, u8 regnum)
+{
+	int val;
+
+	phy_write(phydev, MII_BCM54XX_EXP_SEL,
+		  (sec_serdes ? MII_BCM54XX_EXP_SEL_SSD :
+				MII_BCM54XX_EXP_SEL_ER) |
+		  regnum);
+	val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
+	phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
+
+	return val;
+}
+
+static int bcm54xx_exp_write(struct phy_device *phydev,
+			     int sec_serdes, u8 regnum, u16 val)
+{
+	int ret;
+
+	phy_write(phydev, MII_BCM54XX_EXP_SEL,
+		  (sec_serdes ? MII_BCM54XX_EXP_SEL_SSD :
+				MII_BCM54XX_EXP_SEL_ER) |
+		  regnum);
+	ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+	phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
+
+	return ret;
+}
+
 static int bcm54xx_config_init(struct phy_device *phydev)
 {
 	int reg, err;
@@ -70,6 +186,87 @@ static int bcm54xx_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int bcm5482_config_init(struct phy_device *phydev)
+{
+	int err, reg;
+
+	err = bcm54xx_config_init(phydev);
+
+	if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
+		/*
+		 * Enable secondary SerDes and its use as an LED source
+		 */
+		reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD);
+		bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD,
+				     reg |
+				     BCM5482_SHD_SSD_LEDM |
+				     BCM5482_SHD_SSD_EN);
+
+		/*
+		 * Enable SGMII slave mode and auto-detection
+		 */
+		reg = bcm54xx_exp_read(phydev, 1, BCM5482_SSD_SGMII_SLAVE);
+		bcm54xx_exp_write(phydev, 1, BCM5482_SSD_SGMII_SLAVE,
+				  reg |
+				  BCM5482_SSD_SGMII_SLAVE_EN |
+				  BCM5482_SSD_SGMII_SLAVE_AD);
+
+		/*
+		 * Disable secondary SerDes powerdown
+		 */
+		reg = bcm54xx_exp_read(phydev, 1, BCM5482_SSD_1000BX_CTL);
+		bcm54xx_exp_write(phydev, 1, BCM5482_SSD_1000BX_CTL,
+				  reg & ~BCM5482_SSD_1000BX_CTL_PWRDOWN);
+
+		/*
+		 * Select 1000BASE-X register set (primary SerDes)
+		 */
+		reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE);
+		bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE,
+				     reg | BCM5482_SHD_MODE_1000BX);
+
+		/*
+		 * LED1=ACTIVITYLED, LED3=LINKSPD[2]
+		 * (Use LED1 as secondary SerDes ACTIVITY LED)
+		 */
+		bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1,
+			BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
+			BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2));
+
+		/*
+		 * Auto-negotiation doesn't seem to work quite right
+		 * in this mode, so we disable it and force it to the
+		 * right speed/duplex setting.  Only 'link status'
+		 * is important.
+		 */
+		phydev->autoneg = AUTONEG_DISABLE;
+		phydev->speed = SPEED_1000;
+		phydev->duplex = DUPLEX_FULL;
+	}
+
+	return err;
+}
+
+static int bcm5482_read_status(struct phy_device *phydev)
+{
+	int err;
+
+	err = genphy_read_status(phydev);
+
+	if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
+		/*
+		 * Only link status matters for 1000Base-X mode, so force
+		 * 1000 Mbit/s full-duplex status
+		 */
+		if (phydev->link) {
+			phydev->speed = SPEED_1000;
+			phydev->duplex = DUPLEX_FULL;
+		}
+	}
+
+	return err;
+}
+
 static int bcm54xx_ack_interrupt(struct phy_device *phydev)
 {
 	int reg;
@@ -210,9 +407,9 @@ static struct phy_driver bcm5482_driver = {
 	.name		= "Broadcom BCM5482",
 	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-	.config_init	= bcm54xx_config_init,
+	.config_init	= bcm5482_config_init,
 	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
+	.read_status	= bcm5482_read_status,
 	.ack_interrupt	= bcm54xx_ack_interrupt,
 	.config_intr	= bcm54xx_config_intr,
 	.driver 	= { .owner = THIS_MODULE },
-- 
cgit v1.2.3-18-g5258


From 1b0771ab3ea102ce77e9ca83abc500e542402e54 Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Sat, 17 May 2008 06:46:19 +0100
Subject: PHYLIB: Kconfig: Complete the list of Broadcom PHYs supported

 Add Broadcom PHYs supported missing from the description.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/phy/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6bf9e76b0a0..35b431991cc 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -53,7 +53,8 @@ config SMSC_PHY
 config BROADCOM_PHY
 	tristate "Drivers for Broadcom PHYs"
 	---help---
-	  Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
+	  Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
+	  and BCM5482 PHYs.
 
 config ICPLUS_PHY
 	tristate "Drivers for ICPlus PHYs"
-- 
cgit v1.2.3-18-g5258


From 92fbc1c146d1d358c1ecc4e38361089ff929a02c Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Fri, 16 May 2008 10:35:24 -0700
Subject: 3c515: fix using pnp_get_resource when CONFIG_ISAPNP=n

3c515.c uses pnp_irq(), which calls pnp_get_resource(),
which is not defined when CONFIG_PNP=n, so in that case,
get the IRQ from a hardware register.

3c515.c:(.text+0x3adc0): undefined reference to `pnp_get_resource'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/3c515.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 105a8c7ca7e..e4e3241628d 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -572,12 +572,16 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 	int irq;
 	DECLARE_MAC_BUF(mac);
 
+#ifdef __ISAPNP__
 	if (idev) {
 		irq = pnp_irq(idev, 0);
 		vp->dev = &idev->dev;
 	} else {
 		irq = inw(ioaddr + 0x2002) & 15;
 	}
+#else
+	irq = inw(ioaddr + 0x2002) & 15;
+#endif
 
 	dev->base_addr = ioaddr;
 	dev->irq = irq;
-- 
cgit v1.2.3-18-g5258


From 855e1111f3806905b410b745e696fec4f5dac724 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 16 Apr 2008 16:37:28 -0700
Subject: tg3: remove unneeded semicolons

Remove extraneous semicolons after switch and conditional statements.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/tg3.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 07b3f77e762..ae11c672476 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1480,7 +1480,7 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		       "requested.\n",
 		       tp->dev->name, state);
 		return -EINVAL;
-	};
+	}
 
 	power_control |= PCI_PM_CTRL_PME_ENABLE;
 
@@ -1906,7 +1906,7 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8
 		*speed = SPEED_INVALID;
 		*duplex = DUPLEX_INVALID;
 		break;
-	};
+	}
 }
 
 static void tg3_phy_copper_begin(struct tg3 *tp)
@@ -2018,7 +2018,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
 		case SPEED_1000:
 			bmcr |= TG3_BMCR_SPEED1000;
 			break;
-		};
+		}
 
 		if (tp->link_config.duplex == DUPLEX_FULL)
 			bmcr |= BMCR_FULLDPLX;
@@ -2716,7 +2716,7 @@ static int tg3_fiber_aneg_smachine(struct tg3 *tp,
 	default:
 		ret = ANEG_FAILED;
 		break;
-	};
+	}
 
 	return ret;
 }
@@ -3558,7 +3558,7 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key,
 
 	default:
 		return -EINVAL;
-	};
+	}
 
 	/* Do not overwrite any of the map or rp information
 	 * until we are sure we can commit to a new buffer.
@@ -3618,7 +3618,7 @@ static void tg3_recycle_rx(struct tg3 *tp, u32 opaque_key,
 
 	default:
 		return;
-	};
+	}
 
 	dest_map->skb = src_map->skb;
 	pci_unmap_addr_set(dest_map, mapping,
@@ -4961,7 +4961,7 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, int
 
 		default:
 			break;
-		};
+		}
 	}
 
 	val = tr32(ofs);
@@ -5203,7 +5203,7 @@ static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind)
 
 		default:
 			break;
-		};
+		}
 	}
 
 	if (kind == RESET_KIND_INIT ||
@@ -5228,7 +5228,7 @@ static void tg3_write_sig_post_reset(struct tg3 *tp, int kind)
 
 		default:
 			break;
-		};
+		}
 	}
 
 	if (kind == RESET_KIND_SHUTDOWN)
@@ -5257,7 +5257,7 @@ static void tg3_write_sig_legacy(struct tg3 *tp, int kind)
 
 		default:
 			break;
-		};
+		}
 	}
 }
 
@@ -7282,7 +7282,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 
 	default:
 		break;
-	};
+	}
 
 	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
 		/* Write our heartbeat update interval to APE. */
@@ -10879,7 +10879,7 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 						 LED_CTRL_MODE_PHY_2);
 			break;
 
-		};
+		}
 
 		if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
 		     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) &&
@@ -12178,7 +12178,7 @@ static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
 			val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX |
 				DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
 			break;
-		};
+		}
 	} else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
 		switch (cacheline_size) {
 		case 16:
@@ -12195,7 +12195,7 @@ static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
 			val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE;
 			val |= DMA_RWCTRL_WRITE_BNDRY_128_PCIE;
 			break;
-		};
+		}
 	} else {
 		switch (cacheline_size) {
 		case 16:
@@ -12239,7 +12239,7 @@ static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
 			val |= (DMA_RWCTRL_READ_BNDRY_1024 |
 				DMA_RWCTRL_WRITE_BNDRY_1024);
 			break;
-		};
+		}
 	}
 
 out:
@@ -12599,7 +12599,7 @@ static char * __devinit tg3_phy_string(struct tg3 *tp)
 	case PHY_ID_BCM8002:	return "8002/serdes";
 	case 0:			return "serdes";
 	default:		return "unknown";
-	};
+	}
 }
 
 static char * __devinit tg3_bus_string(struct tg3 *tp, char *str)
-- 
cgit v1.2.3-18-g5258


From b102df14d75753bae216f43579eebf3f9d10cd27 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 16 Apr 2008 16:37:29 -0700
Subject: atl1: use netdev_alloc_skb

Use netdev_alloc_skb for rx buffer allocation. This sets skb->dev
and can be overriden for NUMA machines.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/atlx/atl1.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 6e4c80d41b0..db04bfb3460 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -1876,7 +1876,8 @@ static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
 
 		rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
 
-		skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN);
+		skb = netdev_alloc_skb(adapter->netdev,
+				       adapter->rx_buffer_len + NET_IP_ALIGN);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->net_stats.rx_dropped++;
-- 
cgit v1.2.3-18-g5258


From 3f7a3535a6805870f265f39c92c24b136cb967f4 Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Mon, 5 May 2008 13:34:31 +0100
Subject: sb1250: use netdev_alloc_skb

 Use netdev_alloc_skb.  This sets skb->dev and allows arch specific
allocation.  Also simplify and cleanup the alignment code.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/sb1250-mac.c | 67 ++++++++++++++++++++++--------------------------
 1 file changed, 31 insertions(+), 36 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 29519902517..fe41e4ec21e 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -179,8 +179,7 @@ enum sbmac_state {
 #define SBMAC_MAX_TXDESCR	256
 #define SBMAC_MAX_RXDESCR	256
 
-#define ETHER_ALIGN	2
-#define ETHER_ADDR_LEN	6
+#define ETHER_ADDR_LEN		6
 #define ENET_PACKET_SIZE	1518
 /*#define ENET_PACKET_SIZE	9216 */
 
@@ -262,8 +261,6 @@ struct sbmac_softc {
 	spinlock_t		sbm_lock;	/* spin lock */
 	int			sbm_devflags;	/* current device flags */
 
-	int			sbm_buffersize;
-
 	/*
 	 * Controller-specific things
 	 */
@@ -305,10 +302,11 @@ struct sbmac_softc {
 static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan,
 			  int txrx, int maxdescr);
 static void sbdma_channel_start(struct sbmacdma *d, int rxtx);
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *m);
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+			       struct sk_buff *m);
 static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m);
 static void sbdma_emptyring(struct sbmacdma *d);
-static void sbdma_fillring(struct sbmacdma *d);
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d);
 static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d,
 			    int work_to_do, int poll);
 static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d,
@@ -777,16 +775,13 @@ static void sbdma_channel_stop(struct sbmacdma *d)
 	d->sbdma_remptr = NULL;
 }
 
-static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
+static inline void sbdma_align_skb(struct sk_buff *skb,
+				   unsigned int power2, unsigned int offset)
 {
-	unsigned long addr;
-	unsigned long newaddr;
-
-	addr = (unsigned long) skb->data;
-
-	newaddr = (addr + power2 - 1) & ~(power2 - 1);
+	unsigned char *addr = skb->data;
+	unsigned char *newaddr = PTR_ALIGN(addr, power2);
 
-	skb_reserve(skb,newaddr-addr+offset);
+	skb_reserve(skb, newaddr - addr + offset);
 }
 
 
@@ -797,7 +792,8 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
  *  this queues a buffer for inbound packets.
  *
  *  Input parameters:
- *  	   d - DMA channel descriptor
+ *	   sc - softc structure
+ *  	    d - DMA channel descriptor
  * 	   sb - sk_buff to add, or NULL if we should allocate one
  *
  *  Return value:
@@ -806,8 +802,10 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
  ********************************************************************* */
 
 
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb)
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+			       struct sk_buff *sb)
 {
+	struct net_device *dev = sc->sbm_dev;
 	struct sbdmadscr *dsc;
 	struct sbdmadscr *nextdsc;
 	struct sk_buff *sb_new = NULL;
@@ -848,14 +846,16 @@ static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb)
 	 */
 
 	if (sb == NULL) {
-		sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
+		sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE +
+					       SMP_CACHE_BYTES * 2 +
+					       NET_IP_ALIGN);
 		if (sb_new == NULL) {
 			pr_info("%s: sk_buff allocation failed\n",
 			       d->sbdma_eth->sbm_dev->name);
 			return -ENOBUFS;
 		}
 
-		sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN);
+		sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN);
 	}
 	else {
 		sb_new = sb;
@@ -874,10 +874,10 @@ static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb)
 	 * Do not interrupt per DMA transfer.
 	 */
 	dsc->dscr_a = virt_to_phys(sb_new->data) |
-		V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0;
+		V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0;
 #else
 	dsc->dscr_a = virt_to_phys(sb_new->data) |
-		V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
+		V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) |
 		M_DMA_DSCRA_INTERRUPT;
 #endif
 
@@ -1032,18 +1032,19 @@ static void sbdma_emptyring(struct sbmacdma *d)
  *  with sk_buffs
  *
  *  Input parameters:
- *  	   d - DMA channel
+ *	   sc - softc structure
+ *  	    d - DMA channel
  *
  *  Return value:
  *  	   nothing
  ********************************************************************* */
 
-static void sbdma_fillring(struct sbmacdma *d)
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d)
 {
 	int idx;
 
-	for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
-		if (sbdma_add_rcvbuffer(d,NULL) != 0)
+	for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) {
+		if (sbdma_add_rcvbuffer(sc, d, NULL) != 0)
 			break;
 	}
 }
@@ -1159,10 +1160,11 @@ again:
 			 * packet and put it right back on the receive ring.
 			 */
 
-			if (unlikely (sbdma_add_rcvbuffer(d,NULL) ==
-				      -ENOBUFS)) {
+			if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) ==
+				     -ENOBUFS)) {
 				dev->stats.rx_dropped++;
-				sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
+				/* Re-add old buffer */
+				sbdma_add_rcvbuffer(sc, d, sb);
 				/* No point in continuing at the moment */
 				printk(KERN_ERR "dropped packet (1)\n");
 				d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
@@ -1212,7 +1214,7 @@ again:
 			 * put it back on the receive ring.
 			 */
 			dev->stats.rx_errors++;
-			sbdma_add_rcvbuffer(d,sb);
+			sbdma_add_rcvbuffer(sc, d, sb);
 		}
 
 
@@ -1570,7 +1572,7 @@ static void sbmac_channel_start(struct sbmac_softc *s)
 	 * Fill the receive ring
 	 */
 
-	sbdma_fillring(&(s->sbm_rxdma));
+	sbdma_fillring(s, &(s->sbm_rxdma));
 
 	/*
 	 * Turn on the rest of the bits in the enable register
@@ -2312,13 +2314,6 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 		dev->dev_addr[i] = eaddr[i];
 	}
 
-
-	/*
-	 * Init packet size
-	 */
-
-	sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
-
 	/*
 	 * Initialize context (get pointers to registers and stuff), then
 	 * allocate the memory for the descriptor tables.
-- 
cgit v1.2.3-18-g5258


From d27e7c3f6c82297611d1e1ee9476a2f31b3e89df Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 16 Apr 2008 16:37:37 -0700
Subject: ixp2000: use netdev_alloc_skb

Use netdev_alloc_skb. This sets skb->dev and allows arch specific
allocation.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/ixp2000/ixpdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 484cb2ba717..7111c65f0b3 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -108,14 +108,14 @@ static int ixpdev_rx(struct net_device *dev, int processed, int budget)
 		if (unlikely(!netif_running(nds[desc->channel])))
 			goto err;
 
-		skb = dev_alloc_skb(desc->pkt_length + 2);
+		skb = netdev_alloc_skb(dev, desc->pkt_length + 2);
 		if (likely(skb != NULL)) {
 			skb_reserve(skb, 2);
 			skb_copy_to_linear_data(skb, buf, desc->pkt_length);
 			skb_put(skb, desc->pkt_length);
 			skb->protocol = eth_type_trans(skb, nds[desc->channel]);
 
-			skb->dev->last_rx = jiffies;
+			dev->last_rx = jiffies;
 
 			netif_receive_skb(skb);
 		}
-- 
cgit v1.2.3-18-g5258


From 8eb6013189e03aa21aa53fd72c092713fdb30e44 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 16 Apr 2008 16:37:38 -0700
Subject: hamachi: use netdev_alloc_skb

Use netdev_alloc_skb. This sets skb->dev and allows arch specific
allocation.

Remove dead code and dead comments.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/hamachi.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index e5c2380f50c..3199526bcec 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -1140,11 +1140,11 @@ static void hamachi_tx_timeout(struct net_device *dev)
 	}
 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz);
+		struct sk_buff *skb = netdev_alloc_skb(dev, hmp->rx_buf_sz);
 		hmp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
-		skb->dev = dev;         /* Mark as being used by this device. */
+
 		skb_reserve(skb, 2); /* 16 byte align the IP header. */
                 hmp->rx_ring[i].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
 			skb->data, hmp->rx_buf_sz, PCI_DMA_FROMDEVICE));
@@ -1178,14 +1178,6 @@ static void hamachi_init_ring(struct net_device *dev)
 	hmp->cur_rx = hmp->cur_tx = 0;
 	hmp->dirty_rx = hmp->dirty_tx = 0;
 
-#if 0
-	/* This is wrong.  I'm not sure what the original plan was, but this
-	 * is wrong.  An MTU of 1 gets you a buffer of 1536, while an MTU
-	 * of 1501 gets a buffer of 1533? -KDU
-	 */
-	hmp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
-#endif
-	/* My attempt at a reasonable correction */
 	/* +26 gets the maximum ethernet encapsulation, +7 & ~7 because the
 	 * card needs room to do 8 byte alignment, +2 so we can reserve
 	 * the first 2 bytes, and +16 gets room for the status word from the
-- 
cgit v1.2.3-18-g5258


From 47f98c7d4bfc08e5efffd4fe22296044ab4db21e Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 16 Apr 2008 16:37:39 -0700
Subject: dl2k: use netdev_alloc_skb

Use netdev_alloc_skb. This sets skb->dev and allows arch specific
allocation.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/dl2k.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index e233d04a213..8277e89e552 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -499,7 +499,7 @@ rio_timer (unsigned long data)
 			entry = np->old_rx % RX_RING_SIZE;
 			/* Dropped packets don't need to re-allocate */
 			if (np->rx_skbuff[entry] == NULL) {
-				skb = dev_alloc_skb (np->rx_buf_sz);
+				skb = netdev_alloc_skb (dev, np->rx_buf_sz);
 				if (skb == NULL) {
 					np->rx_ring[entry].fraginfo = 0;
 					printk (KERN_INFO
@@ -570,7 +570,7 @@ alloc_list (struct net_device *dev)
 	/* Allocate the rx buffers */
 	for (i = 0; i < RX_RING_SIZE; i++) {
 		/* Allocated fixed size of skbuff */
-		struct sk_buff *skb = dev_alloc_skb (np->rx_buf_sz);
+		struct sk_buff *skb = netdev_alloc_skb (dev, np->rx_buf_sz);
 		np->rx_skbuff[i] = skb;
 		if (skb == NULL) {
 			printk (KERN_ERR
@@ -867,7 +867,7 @@ receive_packet (struct net_device *dev)
 						  PCI_DMA_FROMDEVICE);
 				skb_put (skb = np->rx_skbuff[entry], pkt_len);
 				np->rx_skbuff[entry] = NULL;
-			} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
+			} else if ((skb = netdev_alloc_skb(dev, pkt_len + 2))) {
 				pci_dma_sync_single_for_cpu(np->pdev,
 							    desc_to_dma(desc),
 							    np->rx_buf_sz,
@@ -904,7 +904,7 @@ receive_packet (struct net_device *dev)
 		struct sk_buff *skb;
 		/* Dropped packets don't need to re-allocate */
 		if (np->rx_skbuff[entry] == NULL) {
-			skb = dev_alloc_skb (np->rx_buf_sz);
+			skb = netdev_alloc_skb(dev, np->rx_buf_sz);
 			if (skb == NULL) {
 				np->rx_ring[entry].fraginfo = 0;
 				printk (KERN_INFO
-- 
cgit v1.2.3-18-g5258


From c73d2589b784098b2bb6e986c1a7b04e9555fbd3 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 16 Apr 2008 16:37:31 -0700
Subject: via-velocity: use netdev_alloc_skb

Use netdev_alloc_skb for rx buffer allocation. This sets skb->dev
and can be overriden for NUMA machines.

Change code to return new buffer rather than call by reference.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/via-velocity.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 6b8d882d197..3e94c8fff9e 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1495,24 +1495,18 @@ static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
  *	enough. This function returns a negative value if the received
  *	packet is too big or if memory is exhausted.
  */
-static inline int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
-				   struct velocity_info *vptr)
+static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
+			    struct velocity_info *vptr)
 {
 	int ret = -1;
-
 	if (pkt_size < rx_copybreak) {
 		struct sk_buff *new_skb;
 
-		new_skb = dev_alloc_skb(pkt_size + 2);
+		new_skb = netdev_alloc_skb(vptr->dev, pkt_size + 2);
 		if (new_skb) {
-			new_skb->dev = vptr->dev;
 			new_skb->ip_summed = rx_skb[0]->ip_summed;
-
-			if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN)
-				skb_reserve(new_skb, 2);
-
-			skb_copy_from_linear_data(rx_skb[0], new_skb->data,
-						  pkt_size);
+			skb_reserve(new_skb, 2);
+			skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
 			*rx_skb = new_skb;
 			ret = 0;
 		}
@@ -1629,7 +1623,7 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
 	struct rx_desc *rd = &(vptr->rd_ring[idx]);
 	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
 
-	rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64);
+	rd_info->skb = netdev_alloc_skb(vptr->dev, vptr->rx_buf_sz + 64);
 	if (rd_info->skb == NULL)
 		return -ENOMEM;
 
@@ -1638,7 +1632,6 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
 	 *	64byte alignment.
 	 */
 	skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
-	rd_info->skb->dev = vptr->dev;
 	rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
 
 	/*
-- 
cgit v1.2.3-18-g5258


From c03571a3e22b821e5be7bda7b166c4554770f489 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 16 Apr 2008 16:37:32 -0700
Subject: via-velocity: use memmove

Use memmove to handle overlapping copy of data.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/via-velocity.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 3e94c8fff9e..bcbf2fa9b94 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1527,12 +1527,8 @@ static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
 static inline void velocity_iph_realign(struct velocity_info *vptr,
 					struct sk_buff *skb, int pkt_size)
 {
-	/* FIXME - memmove ? */
 	if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
-		int i;
-
-		for (i = pkt_size; i >= 0; i--)
-			*(skb->data + i + 2) = *(skb->data + i);
+		memmove(skb->data + 2, skb->data, pkt_size);
 		skb_reserve(skb, 2);
 	}
 }
-- 
cgit v1.2.3-18-g5258