From 1dc329180fe22ff8651e0ef550ba17ca1cc7bf22 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 11 Jul 2008 15:17:08 -0700 Subject: e1000: Use hw, er32, and ew32 Use struct e1000_hw *hw = adapter->hw; where necessary Change macros E1000_READ_REG and E1000_WRITE_REG to er32 and ew32 Signed-off-by: Auke Kok Signed-off-by: Joe Perches Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 313 +++++++------ drivers/net/e1000/e1000_hw.c | 762 +++++++++++++++---------------- drivers/net/e1000/e1000_main.c | 910 ++++++++++++++++++++------------------ drivers/net/e1000/e1000_osdep.h | 14 +- 4 files changed, 1029 insertions(+), 970 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 4bcfa374f4d..966d52a529e 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -162,7 +162,7 @@ static int e1000_get_settings(struct net_device *netdev, ecmd->transceiver = XCVR_EXTERNAL; } - if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU) { + if (er32(STATUS) & E1000_STATUS_LU) { e1000_get_speed_and_duplex(hw, &adapter->link_speed, &adapter->link_duplex); @@ -313,8 +313,9 @@ static u32 e1000_get_tx_csum(struct net_device *netdev) static int e1000_set_tx_csum(struct net_device *netdev, u32 data) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; - if (adapter->hw.mac_type < e1000_82543) { + if (hw->mac_type < e1000_82543) { if (!data) return -EINVAL; return 0; @@ -331,8 +332,10 @@ static int e1000_set_tx_csum(struct net_device *netdev, u32 data) static int e1000_set_tso(struct net_device *netdev, u32 data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if ((adapter->hw.mac_type < e1000_82544) || - (adapter->hw.mac_type == e1000_82547)) + struct e1000_hw *hw = &adapter->hw; + + if ((hw->mac_type < e1000_82544) || + (hw->mac_type == e1000_82547)) return data ? -EINVAL : 0; if (data) @@ -380,22 +383,22 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs, regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; - regs_buff[0] = E1000_READ_REG(hw, CTRL); - regs_buff[1] = E1000_READ_REG(hw, STATUS); + regs_buff[0] = er32(CTRL); + regs_buff[1] = er32(STATUS); - regs_buff[2] = E1000_READ_REG(hw, RCTL); - regs_buff[3] = E1000_READ_REG(hw, RDLEN); - regs_buff[4] = E1000_READ_REG(hw, RDH); - regs_buff[5] = E1000_READ_REG(hw, RDT); - regs_buff[6] = E1000_READ_REG(hw, RDTR); + regs_buff[2] = er32(RCTL); + regs_buff[3] = er32(RDLEN); + regs_buff[4] = er32(RDH); + regs_buff[5] = er32(RDT); + regs_buff[6] = er32(RDTR); - regs_buff[7] = E1000_READ_REG(hw, TCTL); - regs_buff[8] = E1000_READ_REG(hw, TDLEN); - regs_buff[9] = E1000_READ_REG(hw, TDH); - regs_buff[10] = E1000_READ_REG(hw, TDT); - regs_buff[11] = E1000_READ_REG(hw, TIDV); + regs_buff[7] = er32(TCTL); + regs_buff[8] = er32(TDLEN); + regs_buff[9] = er32(TDH); + regs_buff[10] = er32(TDT); + regs_buff[11] = er32(TIDV); - regs_buff[12] = adapter->hw.phy_type; /* PHY type (IGP=1, M88=0) */ + regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */ if (hw->phy_type == e1000_phy_igp) { e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, IGP01E1000_PHY_AGC_A); @@ -453,14 +456,16 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs, if (hw->mac_type >= e1000_82540 && hw->mac_type < e1000_82571 && hw->media_type == e1000_media_type_copper) { - regs_buff[26] = E1000_READ_REG(hw, MANC); + regs_buff[26] = er32(MANC); } } static int e1000_get_eeprom_len(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); - return adapter->hw.eeprom.word_size * 2; + struct e1000_hw *hw = &adapter->hw; + + return hw->eeprom.word_size * 2; } static int e1000_get_eeprom(struct net_device *netdev, @@ -574,6 +579,7 @@ static void e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; char firmware_version[32]; u16 eeprom_data; @@ -582,8 +588,8 @@ static void e1000_get_drvinfo(struct net_device *netdev, /* EEPROM image version # is reported as firmware version # for * 8257{1|2|3} controllers */ - e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data); - switch (adapter->hw.mac_type) { + e1000_read_eeprom(hw, 5, 1, &eeprom_data); + switch (hw->mac_type) { case e1000_82571: case e1000_82572: case e1000_82573: @@ -608,7 +614,8 @@ static void e1000_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { struct e1000_adapter *adapter = netdev_priv(netdev); - e1000_mac_type mac_type = adapter->hw.mac_type; + struct e1000_hw *hw = &adapter->hw; + e1000_mac_type mac_type = hw->mac_type; struct e1000_tx_ring *txdr = adapter->tx_ring; struct e1000_rx_ring *rxdr = adapter->rx_ring; @@ -628,7 +635,8 @@ static int e1000_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { struct e1000_adapter *adapter = netdev_priv(netdev); - e1000_mac_type mac_type = adapter->hw.mac_type; + struct e1000_hw *hw = &adapter->hw; + e1000_mac_type mac_type = hw->mac_type; struct e1000_tx_ring *txdr, *tx_old; struct e1000_rx_ring *rxdr, *rx_old; int i, err; @@ -714,9 +722,10 @@ err_setup: static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg, u32 mask, u32 write) { + struct e1000_hw *hw = &adapter->hw; static const u32 test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; - u8 __iomem *address = adapter->hw.hw_addr + reg; + u8 __iomem *address = hw->hw_addr + reg; u32 read; int i; @@ -737,7 +746,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg, static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg, u32 mask, u32 write) { - u8 __iomem *address = adapter->hw.hw_addr + reg; + struct e1000_hw *hw = &adapter->hw; + u8 __iomem *address = hw->hw_addr + reg; u32 read; writel(write & mask, address); @@ -755,7 +765,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg, #define REG_PATTERN_TEST(reg, mask, write) \ do { \ if (reg_pattern_test(adapter, data, \ - (adapter->hw.mac_type >= e1000_82543) \ + (hw->mac_type >= e1000_82543) \ ? E1000_##reg : E1000_82542_##reg, \ mask, write)) \ return 1; \ @@ -764,7 +774,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg, #define REG_SET_AND_CHECK(reg, mask, write) \ do { \ if (reg_set_and_check(adapter, data, \ - (adapter->hw.mac_type >= e1000_82543) \ + (hw->mac_type >= e1000_82543) \ ? E1000_##reg : E1000_82542_##reg, \ mask, write)) \ return 1; \ @@ -774,11 +784,12 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) { u32 value, before, after; u32 i, toggle; + struct e1000_hw *hw = &adapter->hw; /* The status register is Read Only, so a write should fail. * Some bits that get toggled are ignored. */ - switch (adapter->hw.mac_type) { + switch (hw->mac_type) { /* there are several bits on newer hardware that are r/w */ case e1000_82571: case e1000_82572: @@ -794,10 +805,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) break; } - before = E1000_READ_REG(&adapter->hw, STATUS); - value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle); - E1000_WRITE_REG(&adapter->hw, STATUS, toggle); - after = E1000_READ_REG(&adapter->hw, STATUS) & toggle; + before = er32(STATUS); + value = (er32(STATUS) & toggle); + ew32(STATUS, toggle); + after = er32(STATUS) & toggle; if (value != after) { DPRINTK(DRV, ERR, "failed STATUS register test got: " "0x%08X expected: 0x%08X\n", after, value); @@ -805,9 +816,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) return 1; } /* restore previous status */ - E1000_WRITE_REG(&adapter->hw, STATUS, before); + ew32(STATUS, before); - if (adapter->hw.mac_type != e1000_ich8lan) { + if (hw->mac_type != e1000_ich8lan) { REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); @@ -827,20 +838,20 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); - before = (adapter->hw.mac_type == e1000_ich8lan ? + before = (hw->mac_type == e1000_ich8lan ? 0x06C3B33E : 0x06DFB3FE); REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); - if (adapter->hw.mac_type >= e1000_82543) { + if (hw->mac_type >= e1000_82543) { REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); - if (adapter->hw.mac_type != e1000_ich8lan) + if (hw->mac_type != e1000_ich8lan) REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); - value = (adapter->hw.mac_type == e1000_ich8lan ? + value = (hw->mac_type == e1000_ich8lan ? E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); for (i = 0; i < value; i++) { REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, @@ -856,7 +867,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) } - value = (adapter->hw.mac_type == e1000_ich8lan ? + value = (hw->mac_type == e1000_ich8lan ? E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE); for (i = 0; i < value; i++) REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); @@ -867,6 +878,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) { + struct e1000_hw *hw = &adapter->hw; u16 temp; u16 checksum = 0; u16 i; @@ -874,7 +886,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) *data = 0; /* Read and add up the contents of the EEPROM */ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { - if ((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) { + if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) { *data = 1; break; } @@ -892,8 +904,9 @@ static irqreturn_t e1000_test_intr(int irq, void *data) { struct net_device *netdev = (struct net_device *) data; struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; - adapter->test_icr |= E1000_READ_REG(&adapter->hw, ICR); + adapter->test_icr |= er32(ICR); return IRQ_HANDLED; } @@ -904,6 +917,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) u32 mask, i = 0; bool shared_int = true; u32 irq = adapter->pdev->irq; + struct e1000_hw *hw = &adapter->hw; *data = 0; @@ -921,13 +935,13 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) (shared_int ? "shared" : "unshared")); /* Disable all the interrupts */ - E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF); + ew32(IMC, 0xFFFFFFFF); msleep(10); /* Test each interrupt */ for (; i < 10; i++) { - if (adapter->hw.mac_type == e1000_ich8lan && i == 8) + if (hw->mac_type == e1000_ich8lan && i == 8) continue; /* Interrupt to test */ @@ -941,8 +955,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) * test failed. */ adapter->test_icr = 0; - E1000_WRITE_REG(&adapter->hw, IMC, mask); - E1000_WRITE_REG(&adapter->hw, ICS, mask); + ew32(IMC, mask); + ew32(ICS, mask); msleep(10); if (adapter->test_icr & mask) { @@ -958,8 +972,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) * test failed. */ adapter->test_icr = 0; - E1000_WRITE_REG(&adapter->hw, IMS, mask); - E1000_WRITE_REG(&adapter->hw, ICS, mask); + ew32(IMS, mask); + ew32(ICS, mask); msleep(10); if (!(adapter->test_icr & mask)) { @@ -975,8 +989,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) * test failed. */ adapter->test_icr = 0; - E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF); - E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF); + ew32(IMC, ~mask & 0x00007FFF); + ew32(ICS, ~mask & 0x00007FFF); msleep(10); if (adapter->test_icr) { @@ -987,7 +1001,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) } /* Disable all the interrupts */ - E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF); + ew32(IMC, 0xFFFFFFFF); msleep(10); /* Unhook test interrupt handler */ @@ -1044,6 +1058,7 @@ static void e1000_free_desc_rings(struct e1000_adapter *adapter) static int e1000_setup_desc_rings(struct e1000_adapter *adapter) { + struct e1000_hw *hw = &adapter->hw; struct e1000_tx_ring *txdr = &adapter->test_tx_ring; struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; @@ -1072,17 +1087,14 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) memset(txdr->desc, 0, txdr->size); txdr->next_to_use = txdr->next_to_clean = 0; - E1000_WRITE_REG(&adapter->hw, TDBAL, - ((u64) txdr->dma & 0x00000000FFFFFFFF)); - E1000_WRITE_REG(&adapter->hw, TDBAH, ((u64) txdr->dma >> 32)); - E1000_WRITE_REG(&adapter->hw, TDLEN, - txdr->count * sizeof(struct e1000_tx_desc)); - E1000_WRITE_REG(&adapter->hw, TDH, 0); - E1000_WRITE_REG(&adapter->hw, TDT, 0); - E1000_WRITE_REG(&adapter->hw, TCTL, - E1000_TCTL_PSP | E1000_TCTL_EN | - E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | - E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT); + ew32(TDBAL, ((u64) txdr->dma & 0x00000000FFFFFFFF)); + ew32(TDBAH, ((u64) txdr->dma >> 32)); + ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc)); + ew32(TDH, 0); + ew32(TDT, 0); + ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | + E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | + E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT); for (i = 0; i < txdr->count; i++) { struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i); @@ -1127,18 +1139,17 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) memset(rxdr->desc, 0, rxdr->size); rxdr->next_to_use = rxdr->next_to_clean = 0; - rctl = E1000_READ_REG(&adapter->hw, RCTL); - E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN); - E1000_WRITE_REG(&adapter->hw, RDBAL, - ((u64) rxdr->dma & 0xFFFFFFFF)); - E1000_WRITE_REG(&adapter->hw, RDBAH, ((u64) rxdr->dma >> 32)); - E1000_WRITE_REG(&adapter->hw, RDLEN, rxdr->size); - E1000_WRITE_REG(&adapter->hw, RDH, 0); - E1000_WRITE_REG(&adapter->hw, RDT, 0); + rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + ew32(RDBAL, ((u64) rxdr->dma & 0xFFFFFFFF)); + ew32(RDBAH, ((u64) rxdr->dma >> 32)); + ew32(RDLEN, rxdr->size); + ew32(RDH, 0); + ew32(RDT, 0); rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 | E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | - (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT); - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + (hw->mc_filter_type << E1000_RCTL_MO_SHIFT); + ew32(RCTL, rctl); for (i = 0; i < rxdr->count; i++) { struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i); @@ -1168,68 +1179,72 @@ err_nomem: static void e1000_phy_disable_receiver(struct e1000_adapter *adapter) { + struct e1000_hw *hw = &adapter->hw; + /* Write out to PHY registers 29 and 30 to disable the Receiver. */ - e1000_write_phy_reg(&adapter->hw, 29, 0x001F); - e1000_write_phy_reg(&adapter->hw, 30, 0x8FFC); - e1000_write_phy_reg(&adapter->hw, 29, 0x001A); - e1000_write_phy_reg(&adapter->hw, 30, 0x8FF0); + e1000_write_phy_reg(hw, 29, 0x001F); + e1000_write_phy_reg(hw, 30, 0x8FFC); + e1000_write_phy_reg(hw, 29, 0x001A); + e1000_write_phy_reg(hw, 30, 0x8FF0); } static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter) { + struct e1000_hw *hw = &adapter->hw; u16 phy_reg; /* Because we reset the PHY above, we need to re-force TX_CLK in the * Extended PHY Specific Control Register to 25MHz clock. This * value defaults back to a 2.5MHz clock when the PHY is reset. */ - e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); + e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); phy_reg |= M88E1000_EPSCR_TX_CLK_25; - e1000_write_phy_reg(&adapter->hw, + e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_reg); /* In addition, because of the s/w reset above, we need to enable * CRS on TX. This must be set for both full and half duplex * operation. */ - e1000_read_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, &phy_reg); + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg); phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - e1000_write_phy_reg(&adapter->hw, + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg); } static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter) { + struct e1000_hw *hw = &adapter->hw; u32 ctrl_reg; u16 phy_reg; /* Setup the Device Control Register for PHY loopback test. */ - ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL); + ctrl_reg = er32(CTRL); ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */ E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */ E1000_CTRL_FD); /* Force Duplex to FULL */ - E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg); + ew32(CTRL, ctrl_reg); /* Read the PHY Specific Control Register (0x10) */ - e1000_read_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, &phy_reg); + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg); /* Clear Auto-Crossover bits in PHY Specific Control Register * (bits 6:5). */ phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE; - e1000_write_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, phy_reg); + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg); /* Perform software reset on the PHY */ - e1000_phy_reset(&adapter->hw); + e1000_phy_reset(hw); /* Have to setup TX_CLK and TX_CRS after software reset */ e1000_phy_reset_clk_and_crs(adapter); - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8100); + e1000_write_phy_reg(hw, PHY_CTRL, 0x8100); /* Wait for reset to complete. */ udelay(500); @@ -1241,23 +1256,23 @@ static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter) e1000_phy_disable_receiver(adapter); /* Set the loopback bit in the PHY control register. */ - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); phy_reg |= MII_CR_LOOPBACK; - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg); + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); /* Setup TX_CLK and TX_CRS one more time. */ e1000_phy_reset_clk_and_crs(adapter); /* Check Phy Configuration */ - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); if (phy_reg != 0x4100) return 9; - e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); + e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); if (phy_reg != 0x0070) return 10; - e1000_read_phy_reg(&adapter->hw, 29, &phy_reg); + e1000_read_phy_reg(hw, 29, &phy_reg); if (phy_reg != 0x001A) return 11; @@ -1266,29 +1281,30 @@ static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter) static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) { + struct e1000_hw *hw = &adapter->hw; u32 ctrl_reg = 0; u32 stat_reg = 0; - adapter->hw.autoneg = false; + hw->autoneg = false; - if (adapter->hw.phy_type == e1000_phy_m88) { + if (hw->phy_type == e1000_phy_m88) { /* Auto-MDI/MDIX Off */ - e1000_write_phy_reg(&adapter->hw, + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); /* reset to update Auto-MDI/MDIX */ - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140); + e1000_write_phy_reg(hw, PHY_CTRL, 0x9140); /* autoneg off */ - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140); - } else if (adapter->hw.phy_type == e1000_phy_gg82563) - e1000_write_phy_reg(&adapter->hw, + e1000_write_phy_reg(hw, PHY_CTRL, 0x8140); + } else if (hw->phy_type == e1000_phy_gg82563) + e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); - ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL); + ctrl_reg = er32(CTRL); - if (adapter->hw.phy_type == e1000_phy_ife) { + if (hw->phy_type == e1000_phy_ife) { /* force 100, set loopback */ - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x6100); + e1000_write_phy_reg(hw, PHY_CTRL, 0x6100); /* Now set up the MAC to the same speed/duplex as the PHY. */ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ @@ -1298,10 +1314,10 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) E1000_CTRL_FD); /* Force Duplex to FULL */ } else { /* force 1000, set loopback */ - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140); + e1000_write_phy_reg(hw, PHY_CTRL, 0x4140); /* Now set up the MAC to the same speed/duplex as the PHY. */ - ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL); + ctrl_reg = er32(CTRL); ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ @@ -1309,23 +1325,23 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) E1000_CTRL_FD); /* Force Duplex to FULL */ } - if (adapter->hw.media_type == e1000_media_type_copper && - adapter->hw.phy_type == e1000_phy_m88) + if (hw->media_type == e1000_media_type_copper && + hw->phy_type == e1000_phy_m88) ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ else { /* Set the ILOS bit on the fiber Nic is half * duplex link is detected. */ - stat_reg = E1000_READ_REG(&adapter->hw, STATUS); + stat_reg = er32(STATUS); if ((stat_reg & E1000_STATUS_FD) == 0) ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); } - E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg); + ew32(CTRL, ctrl_reg); /* Disable the receiver on the PHY so when a cable is plugged in, the * PHY does not begin to autoneg when a cable is reconnected to the NIC. */ - if (adapter->hw.phy_type == e1000_phy_m88) + if (hw->phy_type == e1000_phy_m88) e1000_phy_disable_receiver(adapter); udelay(500); @@ -1335,12 +1351,13 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) static int e1000_set_phy_loopback(struct e1000_adapter *adapter) { + struct e1000_hw *hw = &adapter->hw; u16 phy_reg = 0; u16 count = 0; - switch (adapter->hw.mac_type) { + switch (hw->mac_type) { case e1000_82543: - if (adapter->hw.media_type == e1000_media_type_copper) { + if (hw->media_type == e1000_media_type_copper) { /* Attempt to setup Loopback mode on Non-integrated PHY. * Some PHY registers get corrupted at random, so * attempt this 10 times. @@ -1374,9 +1391,9 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter) /* Default PHY loopback work is to read the MII * control register and assert bit 14 (loopback mode). */ - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); phy_reg |= MII_CR_LOOPBACK; - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg); + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); return 0; break; } @@ -1402,14 +1419,14 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) case e1000_82572: #define E1000_SERDES_LB_ON 0x410 e1000_set_phy_loopback(adapter); - E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON); + ew32(SCTL, E1000_SERDES_LB_ON); msleep(10); return 0; break; default: - rctl = E1000_READ_REG(hw, RCTL); + rctl = er32(RCTL); rctl |= E1000_RCTL_LBM_TCVR; - E1000_WRITE_REG(hw, RCTL, rctl); + ew32(RCTL, rctl); return 0; } } else if (hw->media_type == e1000_media_type_copper) @@ -1424,9 +1441,9 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) u32 rctl; u16 phy_reg; - rctl = E1000_READ_REG(hw, RCTL); + rctl = er32(RCTL); rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); - E1000_WRITE_REG(hw, RCTL, rctl); + ew32(RCTL, rctl); switch (hw->mac_type) { case e1000_82571: @@ -1434,7 +1451,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) if (hw->media_type == e1000_media_type_fiber || hw->media_type == e1000_media_type_internal_serdes) { #define E1000_SERDES_LB_OFF 0x400 - E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF); + ew32(SCTL, E1000_SERDES_LB_OFF); msleep(10); break; } @@ -1484,13 +1501,14 @@ static int e1000_check_lbtest_frame(struct sk_buff *skb, static int e1000_run_loopback_test(struct e1000_adapter *adapter) { + struct e1000_hw *hw = &adapter->hw; struct e1000_tx_ring *txdr = &adapter->test_tx_ring; struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; int i, j, k, l, lc, good_cnt, ret_val=0; unsigned long time; - E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1); + ew32(RDT, rxdr->count - 1); /* Calculate the loop count based on the largest descriptor ring * The idea is to wrap the largest ring a number of times using 64 @@ -1513,7 +1531,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) PCI_DMA_TODEVICE); if (unlikely(++k == txdr->count)) k = 0; } - E1000_WRITE_REG(&adapter->hw, TDT, k); + ew32(TDT, k); msleep(200); time = jiffies; /* set the start time for the receive */ good_cnt = 0; @@ -1548,9 +1566,11 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) { + struct e1000_hw *hw = &adapter->hw; + /* PHY loopback cannot be performed if SoL/IDER * sessions are active */ - if (e1000_check_phy_reset_block(&adapter->hw)) { + if (e1000_check_phy_reset_block(hw)) { DPRINTK(DRV, ERR, "Cannot do PHY loopback test " "when SoL/IDER is active.\n"); *data = 0; @@ -1572,27 +1592,28 @@ out: static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) { + struct e1000_hw *hw = &adapter->hw; *data = 0; - if (adapter->hw.media_type == e1000_media_type_internal_serdes) { + if (hw->media_type == e1000_media_type_internal_serdes) { int i = 0; - adapter->hw.serdes_link_down = true; + hw->serdes_link_down = true; /* On some blade server designs, link establishment * could take as long as 2-3 minutes */ do { - e1000_check_for_link(&adapter->hw); - if (!adapter->hw.serdes_link_down) + e1000_check_for_link(hw); + if (!hw->serdes_link_down) return *data; msleep(20); } while (i++ < 3750); *data = 1; } else { - e1000_check_for_link(&adapter->hw); - if (adapter->hw.autoneg) /* if auto_neg is set wait for it */ + e1000_check_for_link(hw); + if (hw->autoneg) /* if auto_neg is set wait for it */ msleep(4000); - if (!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { + if (!(er32(STATUS) & E1000_STATUS_LU)) { *data = 1; } } @@ -1615,6 +1636,7 @@ static void e1000_diag_test(struct net_device *netdev, struct ethtool_test *eth_test, u64 *data) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; bool if_running = netif_running(netdev); set_bit(__E1000_TESTING, &adapter->flags); @@ -1622,9 +1644,9 @@ static void e1000_diag_test(struct net_device *netdev, /* Offline tests */ /* save speed, duplex, autoneg settings */ - u16 autoneg_advertised = adapter->hw.autoneg_advertised; - u8 forced_speed_duplex = adapter->hw.forced_speed_duplex; - u8 autoneg = adapter->hw.autoneg; + u16 autoneg_advertised = hw->autoneg_advertised; + u8 forced_speed_duplex = hw->forced_speed_duplex; + u8 autoneg = hw->autoneg; DPRINTK(HW, INFO, "offline testing starting\n"); @@ -1657,9 +1679,9 @@ static void e1000_diag_test(struct net_device *netdev, eth_test->flags |= ETH_TEST_FL_FAILED; /* restore speed, duplex, autoneg settings */ - adapter->hw.autoneg_advertised = autoneg_advertised; - adapter->hw.forced_speed_duplex = forced_speed_duplex; - adapter->hw.autoneg = autoneg; + hw->autoneg_advertised = autoneg_advertised; + hw->forced_speed_duplex = forced_speed_duplex; + hw->autoneg = autoneg; e1000_reset(adapter); clear_bit(__E1000_TESTING, &adapter->flags); @@ -1708,7 +1730,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, case E1000_DEV_ID_82571EB_SERDES: case E1000_DEV_ID_82571EB_COPPER: /* Wake events not supported on port B */ - if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) { + if (er32(STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; break; } @@ -1732,7 +1754,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, /* dual port cards only support WoL on port A from now on * unless it was enabled in the eeprom for port B * so exclude FUNC_1 ports from having WoL enabled */ - if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1 && + if (er32(STATUS) & E1000_STATUS_FUNC_1 && !adapter->eeprom_wol) { wol->supported = 0; break; @@ -1748,6 +1770,7 @@ static void e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; @@ -1759,7 +1782,7 @@ static void e1000_get_wol(struct net_device *netdev, return; /* apply any specific unsupported masks here */ - switch (adapter->hw.device_id) { + switch (hw->device_id) { case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: /* KSP3 does not suppport UCAST wake-ups */ wol->supported &= ~WAKE_UCAST; @@ -1831,11 +1854,12 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) static void e1000_led_blink_callback(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; + struct e1000_hw *hw = &adapter->hw; if (test_and_change_bit(E1000_LED_ON, &adapter->led_status)) - e1000_led_off(&adapter->hw); + e1000_led_off(hw); else - e1000_led_on(&adapter->hw); + e1000_led_on(hw); mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL); } @@ -1843,21 +1867,22 @@ static void e1000_led_blink_callback(unsigned long data) static int e1000_phys_id(struct net_device *netdev, u32 data) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; if (!data) data = INT_MAX; - if (adapter->hw.mac_type < e1000_82571) { + if (hw->mac_type < e1000_82571) { if (!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); adapter->blink_timer.function = e1000_led_blink_callback; adapter->blink_timer.data = (unsigned long) adapter; } - e1000_setup_led(&adapter->hw); + e1000_setup_led(hw); mod_timer(&adapter->blink_timer, jiffies); msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); - } else if (adapter->hw.phy_type == e1000_phy_ife) { + } else if (hw->phy_type == e1000_phy_ife) { if (!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); adapter->blink_timer.function = e1000_led_blink_callback; @@ -1868,13 +1893,13 @@ static int e1000_phys_id(struct net_device *netdev, u32 data) del_timer_sync(&adapter->blink_timer); e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0); } else { - e1000_blink_led_start(&adapter->hw); + e1000_blink_led_start(hw); msleep_interruptible(data * 1000); } - e1000_led_off(&adapter->hw); + e1000_led_off(hw); clear_bit(E1000_LED_ON, &adapter->led_status); - e1000_cleanup_led(&adapter->hw); + e1000_cleanup_led(hw); return 0; } diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index d6c272ae437..5d3c2bd7b61 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -520,7 +520,7 @@ void e1000_set_media_type(struct e1000_hw *hw) hw->media_type = e1000_media_type_copper; break; default: - status = E1000_READ_REG(hw, STATUS); + status = er32(STATUS); if (status & E1000_STATUS_TBIMODE) { hw->media_type = e1000_media_type_fiber; /* tbi_compatibility not valid on fiber */ @@ -568,15 +568,15 @@ s32 e1000_reset_hw(struct e1000_hw *hw) /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, IMC, 0xffffffff); + ew32(IMC, 0xffffffff); /* Disable the Transmit and Receive units. Then delay to allow * any pending transactions to complete before we hit the MAC with * the global reset. */ - E1000_WRITE_REG(hw, RCTL, 0); - E1000_WRITE_REG(hw, TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(hw); + ew32(RCTL, 0); + ew32(TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(); /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ hw->tbi_compatibility_on = false; @@ -586,11 +586,11 @@ s32 e1000_reset_hw(struct e1000_hw *hw) */ msleep(10); - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Must reset the PHY before resetting the MAC */ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); + ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); msleep(5); } @@ -599,12 +599,12 @@ s32 e1000_reset_hw(struct e1000_hw *hw) if (hw->mac_type == e1000_82573) { timeout = 10; - extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; do { - E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); - extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + ew32(EXTCNF_CTRL, extcnf_ctrl); + extcnf_ctrl = er32(EXTCNF_CTRL); if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) break; @@ -619,9 +619,9 @@ s32 e1000_reset_hw(struct e1000_hw *hw) /* Workaround for ICH8 bit corruption issue in FIFO memory */ if (hw->mac_type == e1000_ich8lan) { /* Set Tx and Rx buffer allocation to 8k apiece. */ - E1000_WRITE_REG(hw, PBA, E1000_PBA_8K); + ew32(PBA, E1000_PBA_8K); /* Set Packet Buffer Size to 16k. */ - E1000_WRITE_REG(hw, PBS, E1000_PBS_16K); + ew32(PBS, E1000_PBS_16K); } /* Issue a global reset to the MAC. This will reset the chip's @@ -645,7 +645,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw) case e1000_82545_rev_3: case e1000_82546_rev_3: /* Reset is performed on a shadow of the control register */ - E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST)); + ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST)); break; case e1000_ich8lan: if (!hw->phy_reset_disable && @@ -658,11 +658,11 @@ s32 e1000_reset_hw(struct e1000_hw *hw) } e1000_get_software_flag(hw); - E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); + ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(5); break; default: - E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); + ew32(CTRL, (ctrl | E1000_CTRL_RST)); break; } @@ -677,10 +677,10 @@ s32 e1000_reset_hw(struct e1000_hw *hw) case e1000_82544: /* Wait for reset to complete */ udelay(10); - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); /* Wait for EEPROM reload */ msleep(2); break; @@ -694,10 +694,10 @@ s32 e1000_reset_hw(struct e1000_hw *hw) case e1000_82573: if (!e1000_is_onboard_nvm_eeprom(hw)) { udelay(10); - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); } /* fall through */ default: @@ -710,27 +710,27 @@ s32 e1000_reset_hw(struct e1000_hw *hw) /* Disable HW ARPs on ASF enabled adapters */ if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { - manc = E1000_READ_REG(hw, MANC); + manc = er32(MANC); manc &= ~(E1000_MANC_ARP_EN); - E1000_WRITE_REG(hw, MANC, manc); + ew32(MANC, manc); } if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { e1000_phy_init_script(hw); /* Configure activity LED after PHY reset */ - led_ctrl = E1000_READ_REG(hw, LEDCTL); + led_ctrl = er32(LEDCTL); led_ctrl &= IGP_ACTIVITY_LED_MASK; led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - E1000_WRITE_REG(hw, LEDCTL, led_ctrl); + ew32(LEDCTL, led_ctrl); } /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, IMC, 0xffffffff); + ew32(IMC, 0xffffffff); /* Clear any pending interrupt events. */ - icr = E1000_READ_REG(hw, ICR); + icr = er32(ICR); /* If MWI was previously enabled, reenable it. */ if (hw->mac_type == e1000_82542_rev2_0) { @@ -739,9 +739,9 @@ s32 e1000_reset_hw(struct e1000_hw *hw) } if (hw->mac_type == e1000_ich8lan) { - u32 kab = E1000_READ_REG(hw, KABGTXD); + u32 kab = er32(KABGTXD); kab |= E1000_KABGTXD_BGSQLBIAS; - E1000_WRITE_REG(hw, KABGTXD, kab); + ew32(KABGTXD, kab); } return E1000_SUCCESS; @@ -766,22 +766,22 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw) u32 reg_txdctl, reg_txdctl1; /* link autonegotiation/sync workarounds */ - reg_tarc0 = E1000_READ_REG(hw, TARC0); + reg_tarc0 = er32(TARC0); reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); /* Enable not-done TX descriptor counting */ - reg_txdctl = E1000_READ_REG(hw, TXDCTL); + reg_txdctl = er32(TXDCTL); reg_txdctl |= E1000_TXDCTL_COUNT_DESC; - E1000_WRITE_REG(hw, TXDCTL, reg_txdctl); - reg_txdctl1 = E1000_READ_REG(hw, TXDCTL1); + ew32(TXDCTL, reg_txdctl); + reg_txdctl1 = er32(TXDCTL1); reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC; - E1000_WRITE_REG(hw, TXDCTL1, reg_txdctl1); + ew32(TXDCTL1, reg_txdctl1); switch (hw->mac_type) { case e1000_82571: case e1000_82572: /* Clear PHY TX compatible mode bits */ - reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tarc1 = er32(TARC1); reg_tarc1 &= ~((1 << 30)|(1 << 29)); /* link autonegotiation/sync workarounds */ @@ -791,25 +791,25 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw) reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24)); /* Multiple read bit is reversed polarity */ - reg_tctl = E1000_READ_REG(hw, TCTL); + reg_tctl = er32(TCTL); if (reg_tctl & E1000_TCTL_MULR) reg_tarc1 &= ~(1 << 28); else reg_tarc1 |= (1 << 28); - E1000_WRITE_REG(hw, TARC1, reg_tarc1); + ew32(TARC1, reg_tarc1); break; case e1000_82573: - reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext = er32(CTRL_EXT); reg_ctrl_ext &= ~(1 << 23); reg_ctrl_ext |= (1 << 22); /* TX byte count fix */ - reg_ctrl = E1000_READ_REG(hw, CTRL); + reg_ctrl = er32(CTRL); reg_ctrl &= ~(1 << 29); - E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); - E1000_WRITE_REG(hw, CTRL, reg_ctrl); + ew32(CTRL_EXT, reg_ctrl_ext); + ew32(CTRL, reg_ctrl); break; case e1000_80003es2lan: /* improve small packet performace for fiber/serdes */ @@ -819,14 +819,14 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw) } /* Multiple read bit is reversed polarity */ - reg_tctl = E1000_READ_REG(hw, TCTL); - reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tctl = er32(TCTL); + reg_tarc1 = er32(TARC1); if (reg_tctl & E1000_TCTL_MULR) reg_tarc1 &= ~(1 << 28); else reg_tarc1 |= (1 << 28); - E1000_WRITE_REG(hw, TARC1, reg_tarc1); + ew32(TARC1, reg_tarc1); break; case e1000_ich8lan: /* Reduce concurrent DMA requests to 3 from 4 */ @@ -835,16 +835,16 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw) (hw->device_id != E1000_DEV_ID_ICH8_IGP_M))) reg_tarc0 |= ((1 << 29)|(1 << 28)); - reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext = er32(CTRL_EXT); reg_ctrl_ext |= (1 << 22); - E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); + ew32(CTRL_EXT, reg_ctrl_ext); /* workaround TX hang with TSO=on */ reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)); /* Multiple read bit is reversed polarity */ - reg_tctl = E1000_READ_REG(hw, TCTL); - reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tctl = er32(TCTL); + reg_tarc1 = er32(TARC1); if (reg_tctl & E1000_TCTL_MULR) reg_tarc1 &= ~(1 << 28); else @@ -853,13 +853,13 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw) /* workaround TX hang with TSO=on */ reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24)); - E1000_WRITE_REG(hw, TARC1, reg_tarc1); + ew32(TARC1, reg_tarc1); break; default: break; } - E1000_WRITE_REG(hw, TARC0, reg_tarc0); + ew32(TARC0, reg_tarc0); } } @@ -890,9 +890,9 @@ s32 e1000_init_hw(struct e1000_hw *hw) ((hw->revision_id < 3) || ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) { - reg_data = E1000_READ_REG(hw, STATUS); + reg_data = er32(STATUS); reg_data &= ~0x80000000; - E1000_WRITE_REG(hw, STATUS, reg_data); + ew32(STATUS, reg_data); } /* Initialize Identification LED */ @@ -913,7 +913,7 @@ s32 e1000_init_hw(struct e1000_hw *hw) /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */ if (hw->mac_type != e1000_ich8lan) { if (hw->mac_type < e1000_82545_rev_3) - E1000_WRITE_REG(hw, VET, 0); + ew32(VET, 0); e1000_clear_vfta(hw); } @@ -921,8 +921,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) if (hw->mac_type == e1000_82542_rev2_0) { DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); e1000_pci_clear_mwi(hw); - E1000_WRITE_REG(hw, RCTL, E1000_RCTL_RST); - E1000_WRITE_FLUSH(hw); + ew32(RCTL, E1000_RCTL_RST); + E1000_WRITE_FLUSH(); msleep(5); } @@ -933,8 +933,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */ if (hw->mac_type == e1000_82542_rev2_0) { - E1000_WRITE_REG(hw, RCTL, 0); - E1000_WRITE_FLUSH(hw); + ew32(RCTL, 0); + E1000_WRITE_FLUSH(); msleep(1); if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) e1000_pci_set_mwi(hw); @@ -949,7 +949,7 @@ s32 e1000_init_hw(struct e1000_hw *hw) E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* use write flush to prevent Memory Write Block (MWB) from * occuring when accessing our register space */ - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } /* Set the PCI priority bit correctly in the CTRL register. This @@ -958,8 +958,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) * 82542 and 82543 silicon. */ if (hw->dma_fairness && hw->mac_type <= e1000_82543) { - ctrl = E1000_READ_REG(hw, CTRL); - E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR); + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_PRIOR); } switch (hw->mac_type) { @@ -982,9 +982,9 @@ s32 e1000_init_hw(struct e1000_hw *hw) /* Set the transmit descriptor write-back policy */ if (hw->mac_type > e1000_82544) { - ctrl = E1000_READ_REG(hw, TXDCTL); + ctrl = er32(TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - E1000_WRITE_REG(hw, TXDCTL, ctrl); + ew32(TXDCTL, ctrl); } if (hw->mac_type == e1000_82573) { @@ -996,21 +996,21 @@ s32 e1000_init_hw(struct e1000_hw *hw) break; case e1000_80003es2lan: /* Enable retransmit on late collisions */ - reg_data = E1000_READ_REG(hw, TCTL); + reg_data = er32(TCTL); reg_data |= E1000_TCTL_RTLC; - E1000_WRITE_REG(hw, TCTL, reg_data); + ew32(TCTL, reg_data); /* Configure Gigabit Carry Extend Padding */ - reg_data = E1000_READ_REG(hw, TCTL_EXT); + reg_data = er32(TCTL_EXT); reg_data &= ~E1000_TCTL_EXT_GCEX_MASK; reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX; - E1000_WRITE_REG(hw, TCTL_EXT, reg_data); + ew32(TCTL_EXT, reg_data); /* Configure Transmit Inter-Packet Gap */ - reg_data = E1000_READ_REG(hw, TIPG); + reg_data = er32(TIPG); reg_data &= ~E1000_TIPG_IPGT_MASK; reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; - E1000_WRITE_REG(hw, TIPG, reg_data); + ew32(TIPG, reg_data); reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001); reg_data &= ~0x00100000; @@ -1019,17 +1019,17 @@ s32 e1000_init_hw(struct e1000_hw *hw) case e1000_82571: case e1000_82572: case e1000_ich8lan: - ctrl = E1000_READ_REG(hw, TXDCTL1); + ctrl = er32(TXDCTL1); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - E1000_WRITE_REG(hw, TXDCTL1, ctrl); + ew32(TXDCTL1, ctrl); break; } if (hw->mac_type == e1000_82573) { - u32 gcr = E1000_READ_REG(hw, GCR); + u32 gcr = er32(GCR); gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; - E1000_WRITE_REG(hw, GCR, gcr); + ew32(GCR, gcr); } /* Clear all of the statistics registers (clear on read). It is @@ -1046,11 +1046,11 @@ s32 e1000_init_hw(struct e1000_hw *hw) if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER || hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); /* Relaxed ordering must be disabled to avoid a parity * error crash in a PCI slot. */ ctrl_ext |= E1000_CTRL_EXT_RO_DIS; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + ew32(CTRL_EXT, ctrl_ext); } return ret_val; @@ -1181,7 +1181,7 @@ s32 e1000_setup_link(struct e1000_hw *hw) } ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) << SWDPIO__EXT_SHIFT); - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + ew32(CTRL_EXT, ctrl_ext); } /* Call the necessary subroutine to configure the link. */ @@ -1198,12 +1198,12 @@ s32 e1000_setup_link(struct e1000_hw *hw) /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */ if (hw->mac_type != e1000_ich8lan) { - E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE); - E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH); - E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW); + ew32(FCT, FLOW_CONTROL_TYPE); + ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); + ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); } - E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time); + ew32(FCTTV, hw->fc_pause_time); /* Set the flow control receive threshold registers. Normally, * these registers will be set to a default threshold that may be @@ -1212,18 +1212,18 @@ s32 e1000_setup_link(struct e1000_hw *hw) * registers will be set to 0. */ if (!(hw->fc & E1000_FC_TX_PAUSE)) { - E1000_WRITE_REG(hw, FCRTL, 0); - E1000_WRITE_REG(hw, FCRTH, 0); + ew32(FCRTL, 0); + ew32(FCRTH, 0); } else { /* We need to set up the Receive Threshold high and low water marks * as well as (optionally) enabling the transmission of XON frames. */ if (hw->fc_send_xon) { - E1000_WRITE_REG(hw, FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); - E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water); + ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); + ew32(FCRTH, hw->fc_high_water); } else { - E1000_WRITE_REG(hw, FCRTL, hw->fc_low_water); - E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water); + ew32(FCRTL, hw->fc_low_water); + ew32(FCRTH, hw->fc_high_water); } } return ret_val; @@ -1255,7 +1255,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * loopback mode is disabled during initialization. */ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) - E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); + ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK); /* On adapters with a MAC newer than 82544, SWDP 1 will be * set when the optics detect a signal. On older adapters, it will be @@ -1263,7 +1263,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * If we're on serdes media, adjust the output amplitude to value * set in the EEPROM. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); if (hw->media_type == e1000_media_type_fiber) signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; @@ -1334,9 +1334,9 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) */ DEBUGOUT("Auto-negotiation enabled\n"); - E1000_WRITE_REG(hw, TXCW, txcw); - E1000_WRITE_REG(hw, CTRL, ctrl); - E1000_WRITE_FLUSH(hw); + ew32(TXCW, txcw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); hw->txcw = txcw; msleep(1); @@ -1348,11 +1348,11 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * For internal serdes, we just assume a signal is present, then poll. */ if (hw->media_type == e1000_media_type_internal_serdes || - (E1000_READ_REG(hw, CTRL) & E1000_CTRL_SWDPIN1) == signal) { + (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { DEBUGOUT("Looking for Link\n"); for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { msleep(10); - status = E1000_READ_REG(hw, STATUS); + status = er32(STATUS); if (status & E1000_STATUS_LU) break; } if (i == (LINK_UP_TIMEOUT / 10)) { @@ -1392,7 +1392,7 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_preconfig"); - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* With 82543, we need to force speed and duplex on the MAC equal to what * the PHY speed and duplex configuration is. In addition, we need to * perform a hardware reset on the PHY to take it out of reset. @@ -1400,10 +1400,10 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) if (hw->mac_type > e1000_82543) { ctrl |= E1000_CTRL_SLU; ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); } else { ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); ret_val = e1000_phy_hw_reset(hw); if (ret_val) return ret_val; @@ -1464,10 +1464,10 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) msleep(15); if (hw->mac_type != e1000_ich8lan) { /* Configure activity LED after PHY reset */ - led_ctrl = E1000_READ_REG(hw, LEDCTL); + led_ctrl = er32(LEDCTL); led_ctrl &= IGP_ACTIVITY_LED_MASK; led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - E1000_WRITE_REG(hw, LEDCTL, led_ctrl); + ew32(LEDCTL, led_ctrl); } /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ @@ -1680,9 +1680,9 @@ static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw) if (ret_val) return ret_val; - reg_data = E1000_READ_REG(hw, CTRL_EXT); + reg_data = er32(CTRL_EXT); reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK); - E1000_WRITE_REG(hw, CTRL_EXT, reg_data); + ew32(CTRL_EXT, reg_data); ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, &phy_data); @@ -2074,10 +2074,10 @@ static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex) return ret_val; /* Configure Transmit Inter-Packet Gap */ - tipg = E1000_READ_REG(hw, TIPG); + tipg = er32(TIPG); tipg &= ~E1000_TIPG_IPGT_MASK; tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100; - E1000_WRITE_REG(hw, TIPG, tipg); + ew32(TIPG, tipg); ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); @@ -2109,10 +2109,10 @@ static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw) return ret_val; /* Configure Transmit Inter-Packet Gap */ - tipg = E1000_READ_REG(hw, TIPG); + tipg = er32(TIPG); tipg &= ~E1000_TIPG_IPGT_MASK; tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; - E1000_WRITE_REG(hw, TIPG, tipg); + ew32(TIPG, tipg); ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); @@ -2295,7 +2295,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) DEBUGOUT1("hw->fc = %d\n", hw->fc); /* Read the Device Control Register. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); @@ -2350,7 +2350,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) e1000_config_collision_dist(hw); /* Write the configured values back to the Device Control Reg. */ - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); if ((hw->phy_type == e1000_phy_m88) || (hw->phy_type == e1000_phy_gg82563)) { @@ -2539,13 +2539,13 @@ void e1000_config_collision_dist(struct e1000_hw *hw) else coll_dist = E1000_COLLISION_DISTANCE; - tctl = E1000_READ_REG(hw, TCTL); + tctl = er32(TCTL); tctl &= ~E1000_TCTL_COLD; tctl |= coll_dist << E1000_COLD_SHIFT; - E1000_WRITE_REG(hw, TCTL, tctl); - E1000_WRITE_FLUSH(hw); + ew32(TCTL, tctl); + E1000_WRITE_FLUSH(); } /****************************************************************************** @@ -2573,7 +2573,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) /* Read the Device Control Register and set the bits to Force Speed * and Duplex. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS); @@ -2600,7 +2600,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) ctrl |= E1000_CTRL_SPD_100; /* Write the configured values back to the Device Control Reg. */ - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); return E1000_SUCCESS; } @@ -2622,7 +2622,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw) DEBUGFUNC("e1000_force_mac_fc"); /* Get the current configuration of the Device Control Register */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Because we didn't get link via the internal auto-negotiation * mechanism (we either forced link or we got link via PHY @@ -2666,7 +2666,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw) if (hw->mac_type == e1000_82542_rev2_0) ctrl &= (~E1000_CTRL_TFCE); - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); return E1000_SUCCESS; } @@ -2898,8 +2898,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw) DEBUGFUNC("e1000_check_for_link"); - ctrl = E1000_READ_REG(hw, CTRL); - status = E1000_READ_REG(hw, STATUS); + ctrl = er32(CTRL); + status = er32(STATUS); /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be * set when the optics detect a signal. On older adapters, it will be @@ -2907,7 +2907,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw) */ if ((hw->media_type == e1000_media_type_fiber) || (hw->media_type == e1000_media_type_internal_serdes)) { - rxcw = E1000_READ_REG(hw, RXCW); + rxcw = er32(RXCW); if (hw->media_type == e1000_media_type_fiber) { signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; @@ -2953,11 +2953,11 @@ s32 e1000_check_for_link(struct e1000_hw *hw) (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full || hw->forced_speed_duplex == e1000_10_half)) { - E1000_WRITE_REG(hw, IMC, 0xffffffff); + ew32(IMC, 0xffffffff); ret_val = e1000_polarity_reversal_workaround(hw); - icr = E1000_READ_REG(hw, ICR); - E1000_WRITE_REG(hw, ICS, (icr & ~E1000_ICS_LSC)); - E1000_WRITE_REG(hw, IMS, IMS_ENABLE_MASK); + icr = er32(ICR); + ew32(ICS, (icr & ~E1000_ICS_LSC)); + ew32(IMS, IMS_ENABLE_MASK); } } else { @@ -3022,9 +3022,9 @@ s32 e1000_check_for_link(struct e1000_hw *hw) */ if (hw->tbi_compatibility_on) { /* If we previously were in the mode, turn it off. */ - rctl = E1000_READ_REG(hw, RCTL); + rctl = er32(RCTL); rctl &= ~E1000_RCTL_SBP; - E1000_WRITE_REG(hw, RCTL, rctl); + ew32(RCTL, rctl); hw->tbi_compatibility_on = false; } } else { @@ -3035,9 +3035,9 @@ s32 e1000_check_for_link(struct e1000_hw *hw) */ if (!hw->tbi_compatibility_on) { hw->tbi_compatibility_on = true; - rctl = E1000_READ_REG(hw, RCTL); + rctl = er32(RCTL); rctl |= E1000_RCTL_SBP; - E1000_WRITE_REG(hw, RCTL, rctl); + ew32(RCTL, rctl); } } } @@ -3061,12 +3061,12 @@ s32 e1000_check_for_link(struct e1000_hw *hw) DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ - E1000_WRITE_REG(hw, TXCW, (hw->txcw & ~E1000_TXCW_ANE)); + ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE)); /* Force link-up and also force full-duplex. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); /* Configure Flow Control after forcing link up. */ ret_val = e1000_config_fc_after_link_up(hw); @@ -3084,8 +3084,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw) (hw->media_type == e1000_media_type_internal_serdes)) && (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n"); - E1000_WRITE_REG(hw, TXCW, hw->txcw); - E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU)); + ew32(TXCW, hw->txcw); + ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); hw->serdes_link_down = false; } @@ -3093,10 +3093,10 @@ s32 e1000_check_for_link(struct e1000_hw *hw) * based on MAC synchronization for internal serdes media type. */ else if ((hw->media_type == e1000_media_type_internal_serdes) && - !(E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) { + !(E1000_TXCW_ANE & er32(TXCW))) { /* SYNCH bit and IV bit are sticky. */ udelay(10); - if (E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) { + if (E1000_RXCW_SYNCH & er32(RXCW)) { if (!(rxcw & E1000_RXCW_IV)) { hw->serdes_link_down = false; DEBUGOUT("SERDES: Link is up.\n"); @@ -3107,8 +3107,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw) } } if ((hw->media_type == e1000_media_type_internal_serdes) && - (E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) { - hw->serdes_link_down = !(E1000_STATUS_LU & E1000_READ_REG(hw, STATUS)); + (E1000_TXCW_ANE & er32(TXCW))) { + hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS)); } return E1000_SUCCESS; } @@ -3129,7 +3129,7 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) DEBUGFUNC("e1000_get_speed_and_duplex"); if (hw->mac_type >= e1000_82543) { - status = E1000_READ_REG(hw, STATUS); + status = er32(STATUS); if (status & E1000_STATUS_SPEED_1000) { *speed = SPEED_1000; DEBUGOUT("1000 Mbs, "); @@ -3238,8 +3238,8 @@ static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl) /* Raise the clock input to the Management Data Clock (by setting the MDC * bit), and then delay 10 microseconds. */ - E1000_WRITE_REG(hw, CTRL, (*ctrl | E1000_CTRL_MDC)); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, (*ctrl | E1000_CTRL_MDC)); + E1000_WRITE_FLUSH(); udelay(10); } @@ -3254,8 +3254,8 @@ static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl) /* Lower the clock input to the Management Data Clock (by clearing the MDC * bit), and then delay 10 microseconds. */ - E1000_WRITE_REG(hw, CTRL, (*ctrl & ~E1000_CTRL_MDC)); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC)); + E1000_WRITE_FLUSH(); udelay(10); } @@ -3280,7 +3280,7 @@ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count) mask = 0x01; mask <<= (count - 1); - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); @@ -3296,8 +3296,8 @@ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count) else ctrl &= ~E1000_CTRL_MDIO; - E1000_WRITE_REG(hw, CTRL, ctrl); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); udelay(10); @@ -3328,14 +3328,14 @@ static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) * by raising the input to the Management Data Clock (setting the MDC bit), * and then reading the value of the MDIO bit. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */ ctrl &= ~E1000_CTRL_MDIO_DIR; ctrl &= ~E1000_CTRL_MDIO; - E1000_WRITE_REG(hw, CTRL, ctrl); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); /* Raise and Lower the clock before