From bd0e1b1d380efe713a612c91417b948e7ebea58d Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 27 May 2014 12:56:22 +0200 Subject: brcmfmac: use asynchronous firmware request in SDIO This patch adds use of asynchronous firmware request to the driver SDIO layer. Reviewed-by: Hante Meuleman Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Daniel (Deognyoun) Kim Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 271 ++++++++++----------- 1 file changed, 124 insertions(+), 147 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index efb8c4febe6..506ef0d4a52 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -632,43 +632,28 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = { { BCM4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) } }; - -static const struct firmware *brcmf_sdio_get_fw(struct brcmf_sdio *bus, - enum brcmf_firmware_type type) +static const char *brcmf_sdio_get_fwname(struct brcmf_chip *ci, + enum brcmf_firmware_type type) { - const struct firmware *fw; - const char *name; - int err, i; + int i; for (i = 0; i < ARRAY_SIZE(brcmf_fwname_data); i++) { - if (brcmf_fwname_data[i].chipid == bus->ci->chip && - brcmf_fwname_data[i].revmsk & BIT(bus->ci->chiprev)) { + if (brcmf_fwname_data[i].chipid == ci->chip && + brcmf_fwname_data[i].revmsk & BIT(ci->chiprev)) { switch (type) { case BRCMF_FIRMWARE_BIN: - name = brcmf_fwname_data[i].bin; - break; + return brcmf_fwname_data[i].bin; case BRCMF_FIRMWARE_NVRAM: - name = brcmf_fwname_data[i].nv; - break; + return brcmf_fwname_data[i].nv; default: brcmf_err("invalid firmware type (%d)\n", type); return NULL; } - goto found; } } brcmf_err("Unknown chipid %d [%d]\n", - bus->ci->chip, bus->ci->chiprev); + ci->chip, ci->chiprev); return NULL; - -found: - err = request_firmware(&fw, name, &bus->sdiodev->func[2]->dev); - if ((err) || (!fw)) { - brcmf_err("fail to request firmware %s (%d)\n", name, err); - return NULL; - } - - return fw; } static void pkt_align(struct sk_buff *p, int len, int align) @@ -3278,20 +3263,13 @@ static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus, } static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus, - const struct firmware *nv) + void *vars, u32 varsz) { - void *vars; - u32 varsz; int address; int err; brcmf_dbg(TRACE, "Enter\n"); - vars = brcmf_fw_nvram_strip(nv, &varsz); - - if (vars == NULL) - return -EINVAL; - address = bus->ci->ramsize - varsz + bus->ci->rambase; err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, vars, varsz); if (err) @@ -3300,15 +3278,14 @@ static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus, else if (!brcmf_sdio_verifymemory(bus->sdiodev, address, vars, varsz)) err = -EIO; - brcmf_fw_nvram_free(vars); - return err; } -static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) +static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus, + const struct firmware *fw, + void *nvram, u32 nvlen) { int bcmerror = -EFAULT; - const struct firmware *fw; u32 rstvec; sdio_claim_host(bus->sdiodev->func[1]); @@ -3317,12 +3294,6 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) /* Keep arm in reset */ brcmf_chip_enter_download(bus->ci); - fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN); - if (fw == NULL) { - bcmerror = -ENOENT; - goto err; - } - rstvec = get_unaligned_le32(fw->data); brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec); @@ -3330,17 +3301,12 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) release_firmware(fw); if (bcmerror) { brcmf_err("dongle image file download failed\n"); + brcmf_fw_nvram_free(nvram); goto err; } - fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_NVRAM); - if (fw == NULL) { - bcmerror = -ENOENT; - goto err; - } - - bcmerror = brcmf_sdio_download_nvram(bus, fw); - release_firmware(fw); + bcmerror = brcmf_sdio_download_nvram(bus, nvram, nvlen); + brcmf_fw_nvram_free(nvram); if (bcmerror) { brcmf_err("dongle nvram file download failed\n"); goto err; @@ -3490,97 +3456,6 @@ done: return err; } -static int brcmf_sdio_bus_init(struct device *dev) -{ - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; - struct brcmf_sdio *bus = sdiodev->bus; - int err, ret = 0; - u8 saveclk; - - brcmf_dbg(TRACE, "Enter\n"); - - /* try to download image and nvram to the dongle */ - if (bus_if->state == BRCMF_BUS_DOWN) { - bus->alp_only = true; - err = brcmf_sdio_download_firmware(bus); - if (err) - return err; - bus->alp_only = false; - } - - if (!bus->sdiodev->bus_if->drvr) - return 0; - - /* Start the watchdog timer */ - bus->sdcnt.tickcnt = 0; - brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); - - sdio_claim_host(bus->sdiodev->func[1]); - - /* Make sure backplane clock is on, needed to generate F2 interrupt */ - brcmf_sdio_clkctl(bus, CLK_AVAIL, false); - if (bus->clkstate != CLK_AVAIL) - goto exit; - - /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); - if (!err) { - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); - } - if (err) { - brcmf_err("Failed to force clock for F2: err %d\n", err); - goto exit; - } - - /* Enable function 2 (frame transfers) */ - w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, - offsetof(struct sdpcmd_regs, tosbmailboxdata)); - err = sdio_enable_func(bus->sdiodev->func[SDIO_FUNC_2]); - - - brcmf_dbg(INFO, "enable F2: err=%d\n", err); - - /* If F2 successfully enabled, set core and enable interrupts */ - if (!err) { - /* Set up the interrupt mask and enable interrupts */ - bus->hostintmask = HOSTINTMASK; - w_sdreg32(bus, bus->hostintmask, - offsetof(struct sdpcmd_regs, hostintmask)); - - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err); - } else { - /* Disable F2 again */ - sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); - ret = -ENODEV; - } - - if (brcmf_chip_sr_capable(bus->ci)) { - brcmf_sdio_sr_init(bus); - } else { - /* Restore previous clock setting */ - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - saveclk, &err); - } - - if (ret == 0) { - ret = brcmf_sdiod_intr_register(bus->sdiodev); - if (ret != 0) - brcmf_err("intr register failed:%d\n", ret); - } - - /* If we didn't come up, turn off backplane clock */ - if (ret != 0) - brcmf_sdio_clkctl(bus, CLK_NONE, false); - -exit: - sdio_release_host(bus->sdiodev->func[1]); - - return ret; -} - void brcmf_sdio_isr(struct brcmf_sdio *bus) { brcmf_dbg(TRACE, "Enter\n"); @@ -4026,6 +3901,108 @@ static struct brcmf_bus_ops brcmf_sdio_bus_ops = { .gettxq = brcmf_sdio_bus_gettxq, }; +static void brcmf_sdio_firmware_callback(struct device *dev, + const struct firmware *code, + void *nvram, u32 nvram_len) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + int err = 0; + u8 saveclk; + + brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev)); + + /* try to download image and nvram to the dongle */ + if (bus_if->state == BRCMF_BUS_DOWN) { + bus->alp_only = true; + err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len); + if (err) + goto fail; + bus->alp_only = false; + } + + if (!bus_if->drvr) + return; + + /* Start the watchdog timer */ + bus->sdcnt.tickcnt = 0; + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); + + sdio_claim_host(sdiodev->func[1]); + + /* Make sure backplane clock is on, needed to generate F2 interrupt */ + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); + if (bus->clkstate != CLK_AVAIL) + goto release; + + /* Force clocks on backplane to be sure F2 interrupt propagates */ + saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (!err) { + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); + } + if (err) { + brcmf_err("Failed to force clock for F2: err %d\n", err); + goto release; + } + + /* Enable function 2 (frame transfers) */ + w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, + offsetof(struct sdpcmd_regs, tosbmailboxdata)); + err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]); + + + brcmf_dbg(INFO, "enable F2: err=%d\n", err); + + /* If F2 successfully enabled, set core and enable interrupts */ + if (!err) { + /* Set up the interrupt mask and enable interrupts */ + bus->hostintmask = HOSTINTMASK; + w_sdreg32(bus, bus->hostintmask, + offsetof(struct sdpcmd_regs, hostintmask)); + + brcmf_sdiod_regwb(sdiodev, SBSDIO_WATERMARK, 8, &err); + } else { + /* Disable F2 again */ + sdio_disable_func(sdiodev->func[SDIO_FUNC_2]); + goto release; + } + + if (brcmf_chip_sr_capable(bus->ci)) { + brcmf_sdio_sr_init(bus); + } else { + /* Restore previous clock setting */ + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + saveclk, &err); + } + + if (err == 0) { + err = brcmf_sdiod_intr_register(sdiodev); + if (err != 0) + brcmf_err("intr register failed:%d\n", err); + } + + /* If we didn't come up, turn off backplane clock */ + if (err != 0) + brcmf_sdio_clkctl(bus, CLK_NONE, false); + + sdio_release_host(sdiodev->func[1]); + + err = brcmf_bus_start(dev); + if (err != 0) { + brcmf_err("dongle is not responding\n"); + goto fail; + } + return; + +release: + sdio_release_host(sdiodev->func[1]); +fail: + brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err); + device_release_driver(dev); +} + struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) { int ret; @@ -4149,14 +4126,14 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) brcmf_sdio_debugfs_create(bus); brcmf_dbg(INFO, "completed!!\n"); - ret = brcmf_sdio_bus_init(sdiodev->dev); - if (ret) - goto fail; - - /* if firmware path present try to download and bring up bus */ - ret = brcmf_bus_start(bus->sdiodev->dev); + ret = brcmf_fw_get_firmwares(sdiodev->dev, BRCMF_FW_REQUEST_NVRAM, + brcmf_sdio_get_fwname(bus->ci, + BRCMF_FIRMWARE_BIN), + brcmf_sdio_get_fwname(bus->ci, + BRCMF_FIRMWARE_NVRAM), + brcmf_sdio_firmware_callback); if (ret != 0) { - brcmf_err("dongle is not responding\n"); + brcmf_err("async firmware request failed: %d\n", ret); goto fail; } -- cgit v1.2.3-18-g5258