From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:04:11 +0900 Subject: include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- drivers/net/wan/lapbether.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wan/lapbether.c') diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index d1e3c673e9b..98e2f99903d 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 4d99503e0b28edf654ca1918229a317a3f738f08 Mon Sep 17 00:00:00 2001 From: andrew hendry Date: Mon, 19 Apr 2010 13:30:02 +0000 Subject: X25: Use identifiers for lapbether device to x25 interface Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry Signed-off-by: David S. Miller --- drivers/net/wan/lapbether.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net/wan/lapbether.c') diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 98e2f99903d..4d4dc38c729 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -139,7 +139,7 @@ static int lapbeth_data_indication(struct net_device *dev, struct sk_buff *skb) return NET_RX_DROP; ptr = skb->data; - *ptr = 0x00; + *ptr = X25_IFACE_DATA; skb->protocol = x25_type_trans(skb, dev); return netif_rx(skb); @@ -161,14 +161,14 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb, goto drop; switch (skb->data[0]) { - case 0x00: + case X25_IFACE_DATA: break; - case 0x01: + case X25_IFACE_CONNECT: if ((err = lapb_connect_request(dev)) != LAPB_OK) printk(KERN_ERR "lapbeth: lapb_connect_request " "error: %d\n", err); goto drop; - case 0x02: + case X25_IFACE_DISCONNECT: if ((err = lapb_disconnect_request(dev)) != LAPB_OK) printk(KERN_ERR "lapbeth: lapb_disconnect_request " "err: %d\n", err); @@ -225,7 +225,7 @@ static void lapbeth_connected(struct net_device *dev, int reason) } ptr = skb_put(skb, 1); - *ptr = 0x01; + *ptr = X25_IFACE_CONNECT; skb->protocol = x25_type_trans(skb, dev); netif_rx(skb); @@ -242,7 +242,7 @@ static void lapbeth_disconnected(struct net_device *dev, int reason) } ptr = skb_put(skb, 1); - *ptr = 0x02; + *ptr = X25_IFACE_DISCONNECT; skb->protocol = x25_type_trans(skb, dev); netif_rx(skb); -- cgit v1.2.3-70-g09d2 From dcfc5d787a24b9a20be3e18e3dbbab5280d35e38 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 2 Sep 2010 14:29:35 +0000 Subject: wan: make read-only data const Change several wan drivers to make strings and other initialize only parameters const. Compile tested only (with no new warnings) Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/wan/cycx_drv.c | 14 +++++++------- drivers/net/wan/cycx_main.c | 6 +++--- drivers/net/wan/lapbether.c | 2 +- drivers/net/wan/pc300_drv.c | 2 +- drivers/net/wan/z85230.c | 4 ++-- 5 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers/net/wan/lapbether.c') diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c index a5ddc6c8963..164c3624ba8 100644 --- a/drivers/net/wan/cycx_drv.c +++ b/drivers/net/wan/cycx_drv.c @@ -73,7 +73,7 @@ static int reset_cyc2x(void __iomem *addr); static int detect_cyc2x(void __iomem *addr); /* Miscellaneous functions */ -static int get_option_index(long *optlist, long optval); +static int get_option_index(const long *optlist, long optval); static u16 checksum(u8 *buf, u32 len); #define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET) @@ -81,23 +81,23 @@ static u16 checksum(u8 *buf, u32 len); /* Global Data */ /* private data */ -static char modname[] = "cycx_drv"; -static char fullname[] = "Cyclom 2X Support Module"; -static char copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " +static const char modname[] = "cycx_drv"; +static const char fullname[] = "Cyclom 2X Support Module"; +static const char copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " ""; /* Hardware configuration options. * These are arrays of configuration options used by verification routines. * The first element of each array is its size (i.e. number of options). */ -static long cyc2x_dpmbase_options[] = { +static const long cyc2x_dpmbase_options[] = { 20, 0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000, 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000, 0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000 }; -static long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; +static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; /* Kernel Loadable Module Entry Points */ /* Module 'insert' entry point. @@ -529,7 +529,7 @@ static int detect_cyc2x(void __iomem *addr) /* Miscellaneous */ /* Get option's index into the options list. * Return option's index (1 .. N) or zero if option is invalid. */ -static int get_option_index(long *optlist, long optval) +static int get_option_index(const long *optlist, long optval) { int i = 1; diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c index a0e8611ad8e..859dba9b972 100644 --- a/drivers/net/wan/cycx_main.c +++ b/drivers/net/wan/cycx_main.c @@ -81,9 +81,9 @@ static irqreturn_t cycx_isr(int irq, void *dev_id); */ /* private data */ -static char cycx_drvname[] = "cyclomx"; -static char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver"; -static char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " +static const char cycx_drvname[] = "cyclomx"; +static const char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver"; +static const char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " ""; static int cycx_ncards = CONFIG_CYCX_CARDS; static struct cycx_device *cycx_card_array; /* adapter data space */ diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 4d4dc38c729..7f5bb913c8b 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -46,7 +46,7 @@ #include -static char bcast_addr[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; +static const u8 bcast_addr[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; /* If this number is made larger, check that the temporary string buffer * in lapbeth_new_device is large enough to store the probe device name.*/ diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index c6aa66e5b52..fbf1175a07f 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -1,5 +1,5 @@ #define USE_PCI_CLOCK -static char rcsid[] = +static const char rcsid[] = "Revision: 3.4.5 Date: 2002/03/07 "; /* diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index fbf5e843d48..93956861ea2 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -766,7 +766,7 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id) EXPORT_SYMBOL(z8530_interrupt); -static char reg_init[16]= +static const u8 reg_init[16]= { 0,0,0,0, 0,0,0,0, @@ -1206,7 +1206,7 @@ EXPORT_SYMBOL(z8530_sync_txdma_close); * it exists... */ -static char *z8530_type_name[]={ +static const char *z8530_type_name[]={ "Z8530", "Z85C30", "Z85230" -- cgit v1.2.3-70-g09d2