From 35bb5cadc8c7b1462df57e32e08d964f1be7a75c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 14 Dec 2009 16:05:09 +0000 Subject: via-velocity: Give RX descriptors to the NIC later on open or MTU change velocity_open() calls velocity_give_many_rx_descs(), which gives RX descriptors to the NIC, before installing an interrupt handler or calling velocity_init_registers(). I think this is very unsafe and it appears to explain the bug report . On MTU change, velocity_give_many_rx_descs() is again called before velocity_init_registers(). I'm not sure whether this is unsafe but it does look wrong. Therefore, move the calls to velocity_give_many_rx_descs() after request_irq() and velocity_init_registers(). Signed-off-by: Ben Hutchings Tested-by: Jan Ceuleers Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net/via-velocity.c') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 4ceb441f268..c93f58f5c6f 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2237,8 +2237,6 @@ static int velocity_open(struct net_device *dev) /* Ensure chip is running */ pci_set_power_state(vptr->pdev, PCI_D0); - velocity_give_many_rx_descs(vptr); - velocity_init_registers(vptr, VELOCITY_INIT_COLD); ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED, @@ -2250,6 +2248,8 @@ static int velocity_open(struct net_device *dev) goto out; } + velocity_give_many_rx_descs(vptr); + mac_enable_int(vptr->mac_regs); netif_start_queue(dev); napi_enable(&vptr->napi); @@ -2339,10 +2339,10 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu) dev->mtu = new_mtu; - velocity_give_many_rx_descs(vptr); - velocity_init_registers(vptr, VELOCITY_INIT_COLD); + velocity_give_many_rx_descs(vptr); + mac_enable_int(vptr->mac_regs); netif_start_queue(dev); -- cgit v1.2.3-18-g5258