From 80928805babfd97b6f1721dd942a55dd2e7813ea Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Tue, 6 Nov 2012 00:08:53 +0000 Subject: smsc95xx: set MII_BUSY bit to read/write PHY regs The device datasheet specifies the BUSY bit must be set when reading or writing phy registers. This patch ensures we do that. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 3286166415b..362cb8cfeb9 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -184,7 +184,7 @@ static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx) /* set the address, index & direction (read from PHY) */ phy_id &= dev->mii.phy_id_mask; idx &= dev->mii.reg_num_mask; - addr = (phy_id << 11) | (idx << 6) | MII_READ_; + addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_; ret = smsc95xx_write_reg(dev, MII_ADDR, addr); check_warn_goto_done(ret, "Error writing MII_ADDR"); @@ -221,7 +221,7 @@ static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx, /* set the address, index & direction (write to PHY) */ phy_id &= dev->mii.phy_id_mask; idx &= dev->mii.reg_num_mask; - addr = (phy_id << 11) | (idx << 6) | MII_WRITE_; + addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_; ret = smsc95xx_write_reg(dev, MII_ADDR, addr); check_warn_goto_done(ret, "Error writing MII_ADDR"); -- cgit v1.2.3-18-g5258