From fa0b9a4c41490d550ebd3bd418f4551c989fec5d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 28 Jan 2010 20:59:23 +0000 Subject: tulip/media.c: Use dev_ and pr_ Convert printks to dev_ where a dev is available Convert printks to pr_ where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- drivers/net/tulip/media.c | 74 +++++++++++++++++++++++------------------------ 1 file changed, 36 insertions(+), 38 deletions(-) (limited to 'drivers/net/tulip') diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index d8fda83705b..68b170ae4d1 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -182,9 +182,8 @@ void tulip_select_media(struct net_device *dev, int startup) switch (mleaf->type) { case 0: /* 21140 non-MII xcvr. */ if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver" - " with control setting %2.2x.\n", - dev->name, p[1]); + printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver with control setting %02x\n", + dev->name, p[1]); dev->if_port = p[0]; if (startup) iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12); @@ -205,15 +204,15 @@ void tulip_select_media(struct net_device *dev, int startup) struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset]; unsigned char *rst = rleaf->leafdata; if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Resetting the transceiver.\n", - dev->name); + printk(KERN_DEBUG "%s: Resetting the transceiver\n", + dev->name); for (i = 0; i < rst[0]; i++) iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15); } if (tulip_debug > 1) - printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control " - "%4.4x/%4.4x.\n", - dev->name, medianame[dev->if_port], setup[0], setup[1]); + printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control %04x/%04x\n", + dev->name, medianame[dev->if_port], + setup[0], setup[1]); if (p[0] & 0x40) { /* SIA (CSR13-15) setup values are provided. */ csr13val = setup[0]; csr14val = setup[1]; @@ -240,8 +239,8 @@ void tulip_select_media(struct net_device *dev, int startup) if (startup) iowrite32(csr13val, ioaddr + CSR13); } if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Setting CSR15 to %8.8x/%8.8x.\n", - dev->name, csr15dir, csr15val); + printk(KERN_DEBUG "%s: Setting CSR15 to %08x/%08x\n", + dev->name, csr15dir, csr15val); if (mleaf->type == 4) new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18); else @@ -317,8 +316,9 @@ void tulip_select_media(struct net_device *dev, int startup) if (tp->mii_advertise == 0) tp->mii_advertise = tp->advertising[phy_num]; if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Advertising %4.4x on MII %d.\n", - dev->name, tp->mii_advertise, tp->phys[phy_num]); + printk(KERN_DEBUG "%s: Advertising %04x on MII %d\n", + dev->name, tp->mii_advertise, + tp->phys[phy_num]); tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise); } break; @@ -335,8 +335,8 @@ void tulip_select_media(struct net_device *dev, int startup) struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset]; unsigned char *rst = rleaf->leafdata; if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Resetting the transceiver.\n", - dev->name); + printk(KERN_DEBUG "%s: Resetting the transceiver\n", + dev->name); for (i = 0; i < rst[0]; i++) iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15); } @@ -344,20 +344,20 @@ void tulip_select_media(struct net_device *dev, int startup) break; } default: - printk(KERN_DEBUG "%s: Invalid media table selection %d.\n", - dev->name, mleaf->type); + printk(KERN_DEBUG "%s: Invalid media table selection %d\n", + dev->name, mleaf->type); new_csr6 = 0x020E0000; } if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %2.2x.\n", - dev->name, medianame[dev->if_port], + printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %02x\n", + dev->name, medianame[dev->if_port], ioread32(ioaddr + CSR12) & 0xff); } else if (tp->chip_id == LC82C168) { if (startup && ! tp->medialock) dev->if_port = tp->mii_cnt ? 11 : 0; if (tulip_debug > 1) - printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s.\n", - dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]); + printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s\n", + dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]); if (tp->mii_cnt) { new_csr6 = 0x810C0000; iowrite32(0x0001, ioaddr + CSR15); @@ -388,10 +388,9 @@ void tulip_select_media(struct net_device *dev, int startup) } else new_csr6 = 0x03860000; if (tulip_debug > 1) - printk(KERN_DEBUG "%s: No media description table, assuming " - "%s transceiver, CSR12 %2.2x.\n", - dev->name, medianame[dev->if_port], - ioread32(ioaddr + CSR12)); + printk(KERN_DEBUG "%s: No media description table, assuming %s transceiver, CSR12 %02x\n", + dev->name, medianame[dev->if_port], + ioread32(ioaddr + CSR12)); } tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0); @@ -415,16 +414,17 @@ int tulip_check_duplex(struct net_device *dev) bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR); lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA); if (tulip_debug > 1) - printk(KERN_INFO "%s: MII status %4.4x, Link partner report " - "%4.4x.\n", dev->name, bmsr, lpa); + dev_info(&dev->dev, "MII status %04x, Link partner report %04x\n", + bmsr, lpa); if (bmsr == 0xffff) return -2; if ((bmsr & BMSR_LSTATUS) == 0) { int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR); if ((new_bmsr & BMSR_LSTATUS) == 0) { if (tulip_debug > 1) - printk(KERN_INFO "%s: No link beat on the MII interface," - " status %4.4x.\n", dev->name, new_bmsr); + dev_info(&dev->dev, + "No link beat on the MII interface, status %04x\n", + new_bmsr); return -1; } } @@ -443,10 +443,10 @@ int tulip_check_duplex(struct net_device *dev) tulip_restart_rxtx(tp); if (tulip_debug > 0) - printk(KERN_INFO "%s: Setting %s-duplex based on MII" - "#%d link partner capability of %4.4x.\n", - dev->name, tp->full_duplex ? "full" : "half", - tp->phys[0], lpa); + dev_info(&dev->dev, + "Setting %s-duplex based on MII#%d link partner capability of %04x\n", + tp->full_duplex ? "full" : "half", + tp->phys[0], lpa); return 1; } @@ -501,15 +501,13 @@ void __devinit tulip_find_mii (struct net_device *dev, int board_idx) tp->phys[phy_idx++] = phy; - printk (KERN_INFO "tulip%d: MII transceiver #%d " - "config %4.4x status %4.4x advertising %4.4x.\n", + pr_info("tulip%d: MII transceiver #%d config %04x status %04x advertising %04x\n", board_idx, phy, mii_reg0, mii_status, mii_advert); /* Fixup for DLink with miswired PHY. */ if (mii_advert != to_advert) { - printk (KERN_DEBUG "tulip%d: Advertising %4.4x on PHY %d," - " previously advertising %4.4x.\n", - board_idx, to_advert, phy, mii_advert); + printk(KERN_DEBUG "tulip%d: Advertising %04x on PHY %d, previously advertising %04x\n", + board_idx, to_advert, phy, mii_advert); tulip_mdio_write (dev, phy, 4, to_advert); } @@ -554,7 +552,7 @@ void __devinit tulip_find_mii (struct net_device *dev, int board_idx) } tp->mii_cnt = phy_idx; if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) { - printk (KERN_INFO "tulip%d: ***WARNING***: No MII transceiver found!\n", + pr_info("tulip%d: ***WARNING***: No MII transceiver found!\n", board_idx); tp->phys[0] = 1; } -- cgit v1.2.3-18-g5258