From 51f932c4870f785d73d5fd5fed33306e63cf4efc Mon Sep 17 00:00:00 2001 From: "Choi, David" Date: Mon, 28 Jun 2010 15:23:41 +0000 Subject: micrel phy driver - updated(1) Hello all: This patch fixes what Ben mentioned, namely duplicated ids. From: David J. Choi Body of the explanation: This patch has changes as followings; -support the interrupt from phy devices from Micrel Inc. -support more phy devices, ks8737, ks8721, ks8041, ks8051 from Micrel. -remove vsc8201 because this device was used only internal test at Micrel. Signed-off-by: David J. Choi Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 167 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 148 insertions(+), 19 deletions(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 0692f750c40..8bb7db676a5 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -12,7 +12,8 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Support : ksz9021 , vsc8201, ks8001 + * Support : ksz9021 1000/100/10 phy from Micrel + * ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy */ #include @@ -20,37 +21,146 @@ #include #define PHY_ID_KSZ9021 0x00221611 -#define PHY_ID_VSC8201 0x000FC413 +#define PHY_ID_KS8737 0x00221720 +#define PHY_ID_KS8041 0x00221510 +#define PHY_ID_KS8051 0x00221550 +/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */ #define PHY_ID_KS8001 0x0022161A +/* general Interrupt control/status reg in vendor specific block. */ +#define MII_KSZPHY_INTCS 0x1B +#define KSZPHY_INTCS_JABBER (1 << 15) +#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14) +#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13) +#define KSZPHY_INTCS_PARELLEL (1 << 12) +#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11) +#define KSZPHY_INTCS_LINK_DOWN (1 << 10) +#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9) +#define KSZPHY_INTCS_LINK_UP (1 << 8) +#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\ + KSZPHY_INTCS_LINK_DOWN) + +/* general PHY control reg in vendor specific block. */ +#define MII_KSZPHY_CTRL 0x1F +/* bitmap of PHY register to set interrupt mode */ +#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9) +#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14) +#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) + +static int kszphy_ack_interrupt(struct phy_device *phydev) +{ + /* bit[7..0] int status, which is a read and clear register. */ + int rc; + + rc = phy_read(phydev, MII_KSZPHY_INTCS); + + return (rc < 0) ? rc : 0; +} + +static int kszphy_set_interrupt(struct phy_device *phydev) +{ + int temp; + temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ? + KSZPHY_INTCS_ALL : 0; + return phy_write(phydev, MII_KSZPHY_INTCS, temp); +} + +static int kszphy_config_intr(struct phy_device *phydev) +{ + int temp, rc; + + /* set the interrupt pin active low */ + temp = phy_read(phydev, MII_KSZPHY_CTRL); + temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH; + phy_write(phydev, MII_KSZPHY_CTRL, temp); + rc = kszphy_set_interrupt(phydev); + return rc < 0 ? rc : 0; +} + +static int ksz9021_config_intr(struct phy_device *phydev) +{ + int temp, rc; + + /* set the interrupt pin active low */ + temp = phy_read(phydev, MII_KSZPHY_CTRL); + temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH; + phy_write(phydev, MII_KSZPHY_CTRL, temp); + rc = kszphy_set_interrupt(phydev); + return rc < 0 ? rc : 0; +} + +static int ks8737_config_intr(struct phy_device *phydev) +{ + int temp, rc; + + /* set the interrupt pin active low */ + temp = phy_read(phydev, MII_KSZPHY_CTRL); + temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH; + phy_write(phydev, MII_KSZPHY_CTRL, temp); + rc = kszphy_set_interrupt(phydev); + return rc < 0 ? rc : 0; +} static int kszphy_config_init(struct phy_device *phydev) { return 0; } +static struct phy_driver ks8737_driver = { + .phy_id = PHY_ID_KS8737, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KS8737", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = ks8737_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ks8041_driver = { + .phy_id = PHY_ID_KS8041, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KS8041", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause + | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; -static struct phy_driver ks8001_driver = { - .phy_id = PHY_ID_KS8001, - .name = "Micrel KS8001", +static struct phy_driver ks8051_driver = { + .phy_id = PHY_ID_KS8051, .phy_id_mask = 0x00fffff0, - .features = PHY_BASIC_FEATURES, - .flags = PHY_POLL, + .name = "Micrel KS8051", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause + | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }; -static struct phy_driver vsc8201_driver = { - .phy_id = PHY_ID_VSC8201, - .name = "Micrel VSC8201", +static struct phy_driver ks8001_driver = { + .phy_id = PHY_ID_KS8001, + .name = "Micrel KS8001 or KS8721", .phy_id_mask = 0x00fffff0, - .features = PHY_BASIC_FEATURES, - .flags = PHY_POLL, + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }; @@ -58,11 +168,14 @@ static struct phy_driver ksz9021_driver = { .phy_id = PHY_ID_KSZ9021, .phy_id_mask = 0x000fff10, .name = "Micrel KSZ9021 Gigabit PHY", - .features = PHY_GBIT_FEATURES | SUPPORTED_Pause, - .flags = PHY_POLL, + .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause + | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = ksz9021_config_intr, .driver = { .owner = THIS_MODULE, }, }; @@ -73,17 +186,29 @@ static int __init ksphy_init(void) ret = phy_driver_register(&ks8001_driver); if (ret) goto err1; - ret = phy_driver_register(&vsc8201_driver); + + ret = phy_driver_register(&ksz9021_driver); if (ret) goto err2; - ret = phy_driver_register(&ksz9021_driver); + ret = phy_driver_register(&ks8737_driver); if (ret) goto err3; + ret = phy_driver_register(&ks8041_driver); + if (ret) + goto err4; + ret = phy_driver_register(&ks8051_driver); + if (ret) + goto err5; + return 0; +err5: + phy_driver_unregister(&ks8041_driver); +err4: + phy_driver_unregister(&ks8737_driver); err3: - phy_driver_unregister(&vsc8201_driver); + phy_driver_unregister(&ksz9021_driver); err2: phy_driver_unregister(&ks8001_driver); err1: @@ -93,8 +218,10 @@ err1: static void __exit ksphy_exit(void) { phy_driver_unregister(&ks8001_driver); - phy_driver_unregister(&vsc8201_driver); + phy_driver_unregister(&ks8737_driver); phy_driver_unregister(&ksz9021_driver); + phy_driver_unregister(&ks8041_driver); + phy_driver_unregister(&ks8051_driver); } module_init(ksphy_init); @@ -106,8 +233,10 @@ MODULE_LICENSE("GPL"); static struct mdio_device_id micrel_tbl[] = { { PHY_ID_KSZ9021, 0x000fff10 }, - { PHY_ID_VSC8201, 0x00fffff0 }, { PHY_ID_KS8001, 0x00fffff0 }, + { PHY_ID_KS8737, 0x00fffff0 }, + { PHY_ID_KS8041, 0x00fffff0 }, + { PHY_ID_KS8051, 0x00fffff0 }, { } }; -- cgit v1.2.3-18-g5258