From f7e9e230f41f991a6e3e7cb6096424fdfb626081 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 10 Jan 2013 22:52:54 +0000 Subject: qlge: remove NETIF_F_TSO6 flag It is werid that qlge driver supports NETIF_F_TSO6 but not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1] when VLAN device setups on a qlge interface. I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM, so we have to just remove the NETIF_F_TSO6 flag. After this patch, the TCP/IPv6 traffic becomes normal again, no kernel warnings any more. NOTE: I only tested it on 2.6.32 kernel, even if the upstream kernel could fix this automatically (it is hard to track NETIF* flags), removing it is also safe. 1. https://bugzilla.redhat.com/show_bug.cgi?id=891839 Cc: Jitendra Kalsaria Cc: Ron Mercer Cc: linux-driver@qlogic.com Cc: David S. Miller Signed-off-by: Cong Wang Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index f80cd975dae..3e73742024b 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4678,7 +4678,7 @@ static int qlge_probe(struct pci_dev *pdev, qdev = netdev_priv(ndev); SET_NETDEV_DEV(ndev, &pdev->dev); ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM; ndev->features = ndev->hw_features | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; -- cgit v1.2.3-18-g5258