From 94b144a7799e9150ae871330b9b9d8e30401220e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 10 Jan 2013 06:58:42 +0000 Subject: net: ethernet: xilinx: Do not use axienet on PPC Axi ethernet can't be used on PPC because it is little endian IP and PPC is big endian. This system can't be designed. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet/xilinx') diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index 5778a4ae116..122d60c0481 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -27,7 +27,7 @@ config XILINX_EMACLITE config XILINX_AXI_EMAC tristate "Xilinx 10/100/1000 AXI Ethernet support" - depends on (PPC32 || MICROBLAZE) + depends on MICROBLAZE select PHYLIB ---help--- This driver supports the 10/100/1000 Ethernet from Xilinx for the -- cgit v1.2.3-18-g5258 From cb59c87dbc8be2ffa692c50bd22f89025ba7a342 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 10 Jan 2013 06:58:43 +0000 Subject: net: ethernet: xilinx: Do not use NO_IRQ in axienet This driver is used on Microblaze and will be used on Arm Zynq. Microblaze doesn't define NO_IRQ and no IRQ is 0. Arm still uses NO_IRQ as -1 and there is no option to connect IRQ to irq 0. That's why <= 0 is only one option how to find out undefined IRQ. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet/xilinx') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index d9f69b82cc4..6f47100e58d 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1590,7 +1590,7 @@ static int axienet_of_probe(struct platform_device *op) lp->rx_irq = irq_of_parse_and_map(np, 1); lp->tx_irq = irq_of_parse_and_map(np, 0); of_node_put(np); - if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) { + if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) { dev_err(&op->dev, "could not determine irqs\n"); ret = -ENOMEM; goto err_iounmap_2; -- cgit v1.2.3-18-g5258