From 6551ab5d30d6bf0cea0c6cb294686ce3c7fc6042 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 16 Mar 2012 11:42:11 +0100 Subject: mtd: add device-tree support to spear_smi This patch adds support to configure the SPEAr SMI driver via device-tree instead of platform_data. Signed-off-by: Stefan Roese Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/spear_smi.c | 111 +++++++++++++++++++++++++++++++++++----- 1 file changed, 99 insertions(+), 12 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index f7f34fd1a3e..797d43cd355 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -33,9 +33,8 @@ #include #include #include - -/* max possible slots for serial-nor flash chip in the SMI controller */ -#define MAX_NUM_FLASH_CHIP 4 +#include +#include /* SMI clock rate */ #define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */ @@ -748,9 +747,63 @@ err_probe: return ret; } -static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank) + +#ifdef CONFIG_OF +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *pp = NULL; + const __be32 *addr; + u32 val; + int len; + int i = 0; + + if (!np) + return -ENODEV; + + of_property_read_u32(np, "clock-rate", &val); + pdata->clk_rate = val; + + pdata->board_flash_info = devm_kzalloc(&pdev->dev, + sizeof(*pdata->board_flash_info), + GFP_KERNEL); + + /* Fill structs for each subnode (flash device) */ + while ((pp = of_get_next_child(np, pp))) { + struct spear_smi_flash_info *flash_info; + + flash_info = &pdata->board_flash_info[i]; + pdata->np[i] = pp; + + /* Read base-addr and size from DT */ + addr = of_get_property(pp, "reg", &len); + pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]); + pdata->board_flash_info->size = be32_to_cpup(&addr[1]); + + if (of_get_property(pp, "st,smi-fast-mode", NULL)) + pdata->board_flash_info->fast_mode = 1; + + i++; + } + + pdata->num_flashes = i; + + return 0; +} +#else +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + return -ENOSYS; +} +#endif + +static int spear_smi_setup_banks(struct platform_device *pdev, + u32 bank, struct device_node *np) { struct spear_smi *dev = platform_get_drvdata(pdev); + struct mtd_part_parser_data ppdata = {}; struct spear_smi_flash_info *flash_info; struct spear_smi_plat_data *pdata; struct spear_snor_flash *flash; @@ -816,11 +869,16 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank) dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n", flash->mtd.erasesize, flash->mtd.erasesize / 1024); +#ifndef CONFIG_OF if (flash_info->partitions) { parts = flash_info->partitions; count = flash_info->nr_partitions; } - ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, parts, count); +#endif + ppdata.of_node = np; + + ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts, + count); if (ret) { dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret); goto err_map; @@ -847,17 +905,34 @@ err_probe: */ static int __devinit spear_smi_probe(struct platform_device *pdev) { - struct spear_smi_plat_data *pdata; + struct device_node *np = pdev->dev.of_node; + struct spear_smi_plat_data *pdata = NULL; struct spear_smi *dev; struct resource *smi_base; int irq, ret = 0; int i; - pdata = dev_get_platdata(&pdev->dev); - if (pdata < 0) { - ret = -ENODEV; - dev_err(&pdev->dev, "no platform data\n"); - goto err; + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: ERROR: no memory", __func__); + ret = -ENOMEM; + goto err; + } + pdev->dev.platform_data = pdata; + ret = spear_smi_probe_config_dt(pdev, np); + if (ret) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + } else { + pdata = dev_get_platdata(&pdev->dev); + if (pdata < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } } smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -932,7 +1007,7 @@ static int __devinit spear_smi_probe(struct platform_device *pdev) /* loop for each serial nor-flash which is connected to smi */ for (i = 0; i < dev->num_flashes; i++) { - ret = spear_smi_setup_banks(pdev, i); + ret = spear_smi_setup_banks(pdev, i, pdata->np[i]); if (ret) { dev_err(&dev->pdev->dev, "bank setup failed\n"); goto err_bank_setup; @@ -967,6 +1042,7 @@ err: static int __devexit spear_smi_remove(struct platform_device *pdev) { struct spear_smi *dev; + struct spear_smi_plat_data *pdata; struct spear_snor_flash *flash; struct resource *smi_base; int ret; @@ -978,6 +1054,8 @@ static int __devexit spear_smi_remove(struct platform_device *pdev) return -ENODEV; } + pdata = dev_get_platdata(&pdev->dev); + /* clean up for all nor flash */ for (i = 0; i < dev->num_flashes; i++) { flash = dev->flash[i]; @@ -1031,11 +1109,20 @@ int spear_smi_resume(struct platform_device *pdev) return ret; } +#ifdef CONFIG_OF +static const struct of_device_id spear_smi_id_table[] = { + { .compatible = "st,spear600-smi" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_smi_id_table); +#endif + static struct platform_driver spear_smi_driver = { .driver = { .name = "smi", .bus = &platform_bus_type, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear_smi_id_table), }, .probe = spear_smi_probe, .remove = __devexit_p(spear_smi_remove), -- cgit v1.2.3-18-g5258