From 6a918bade9dab40aaef80559bd1169c69e8d69cb Mon Sep 17 00:00:00 2001 From: Mike Dunn Date: Sun, 11 Mar 2012 14:21:11 -0700 Subject: mtd: flash drivers set ecc strength Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the maximum number of bit errors that can be corrected in one writesize region. Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl, which is the maximum number of bit errors that can be corrected in one ecc step. Nand infrastructure code translates this to 'ecc_strength'. Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE. It is set in the driver for all other modes. Signed-off-by: Mike Dunn Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/atmel_nand.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/mtd/nand/atmel_nand.c') diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 7769519a54a..662abf08061 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -554,6 +554,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) nand_chip->ecc.hwctl = atmel_nand_hwctl; nand_chip->ecc.read_page = atmel_nand_read_page; nand_chip->ecc.bytes = 4; + nand_chip->ecc.strength = 1; } nand_chip->chip_delay = 20; /* 20us command delay time */ -- cgit v1.2.3-18-g5258