From 1f948b43f7b5cf721cf0d03f507843efc1a9bfad Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 7 Nov 2005 11:15:37 +0000 Subject: [MTD] chips: Clean up trailing white spaces Signed-off-by: Thomas Gleixner --- drivers/mtd/chips/jedec_probe.c | 48 ++++++++++++++++++++--------------------- 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'drivers/mtd/chips/jedec_probe.c') diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 30da428eb7b..edb306c03c0 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1,7 +1,7 @@ -/* +/* Common Flash Interface probe code. (C) 2000 Red Hat. GPL'd. - $Id: jedec_probe.c,v 1.63 2005/02/14 16:30:32 bjd Exp $ + $Id: jedec_probe.c,v 1.66 2005/11/07 11:14:23 gleixner Exp $ See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5) for the standard this probe goes back to. @@ -1719,7 +1719,7 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, static struct mtd_info *jedec_probe(struct map_info *map); -static inline u32 jedec_read_mfr(struct map_info *map, __u32 base, +static inline u32 jedec_read_mfr(struct map_info *map, __u32 base, struct cfi_private *cfi) { map_word result; @@ -1730,7 +1730,7 @@ static inline u32 jedec_read_mfr(struct map_info *map, __u32 base, return result.x[0] & mask; } -static inline u32 jedec_read_id(struct map_info *map, __u32 base, +static inline u32 jedec_read_id(struct map_info *map, __u32 base, struct cfi_private *cfi) { map_word result; @@ -1741,7 +1741,7 @@ static inline u32 jedec_read_id(struct map_info *map, __u32 base, return result.x[0] & mask; } -static inline void jedec_reset(u32 base, struct map_info *map, +static inline void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi) { /* Reset */ @@ -1765,7 +1765,7 @@ static inline void jedec_reset(u32 base, struct map_info *map, * so ensure we're in read mode. Send both the Intel and the AMD command * for this. Intel uses 0xff for this, AMD uses 0xff for NOP, so * this should be safe. - */ + */ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); /* FIXME - should have reset delay before continuing */ } @@ -1807,14 +1807,14 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index) printk("Found: %s\n",jedec_table[index].name); num_erase_regions = jedec_table[index].NumEraseRegions; - + p_cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL); if (!p_cfi->cfiq) { //xx printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name); return 0; } - memset(p_cfi->cfiq,0,sizeof(struct cfi_ident)); + memset(p_cfi->cfiq,0,sizeof(struct cfi_ident)); p_cfi->cfiq->P_ID = jedec_table[index].CmdSet; p_cfi->cfiq->NumEraseRegions = jedec_table[index].NumEraseRegions; @@ -1969,7 +1969,7 @@ static inline int jedec_match( __u32 base, cfi_send_gen_cmd(0x90, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); /* FIXME - should have a delay before continuing */ - match_done: + match_done: return rc; } @@ -1998,23 +1998,23 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, "Probe at base(0x%08x) past the end of the map(0x%08lx)\n", base, map->size -1); return 0; - + } /* Ensure the unlock addresses we try stay inside the map */ probe_offset1 = cfi_build_cmd_addr( - cfi->addr_unlock1, - cfi_interleave(cfi), + cfi->addr_unlock1, + cfi_interleave(cfi), cfi->device_type); probe_offset2 = cfi_build_cmd_addr( - cfi->addr_unlock1, - cfi_interleave(cfi), + cfi->addr_unlock1, + cfi_interleave(cfi), cfi->device_type); if ( ((base + probe_offset1 + map_bankwidth(map)) >= map->size) || ((base + probe_offset2 + map_bankwidth(map)) >= map->size)) { goto retry; } - + /* Reset */ jedec_reset(base, map, cfi); @@ -2027,13 +2027,13 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, /* FIXME - should have a delay before continuing */ if (!cfi->numchips) { - /* This is the first time we're called. Set up the CFI + /* This is the first time we're called. Set up the CFI stuff accordingly and return */ - + cfi->mfr = jedec_read_mfr(map, base, cfi); cfi->id = jedec_read_id(map, base, cfi); DEBUG(MTD_DEBUG_LEVEL3, - "Search for id:(%02x %02x) interleave(%d) type(%d)\n", + "Search for id:(%02x %02x) interleave(%d) type(%d)\n", cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type); for (i=0; i> cfi->chipshift); i++) { unsigned long start; @@ -2083,7 +2083,7 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, map->name, base, start); return 0; } - + /* Yes, it's actually got the device IDs as data. Most * unfortunate. Stick the new chip in read mode * too and if it's the same, assume it's an alias. */ @@ -2097,20 +2097,20 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, } } } - + /* OK, if we got to here, then none of the previous chips appear to be aliases for the current one. */ set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */ cfi->numchips++; - + ok_out: /* Put it back into Read Mode */ jedec_reset(base, map, cfi); printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", - map->name, cfi_interleave(cfi), cfi->device_type*8, base, + map->name, cfi_interleave(cfi), cfi->device_type*8, base, map->bankwidth*8); - + return 1; } -- cgit v1.2.3-18-g5258