From 5b27a1a566c5a4cce81d75107a0f130e43c6a5f8 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 5 Mar 2010 13:43:44 -0800 Subject: mmc: at91_mci: introduce per-mci-revision conditional code We used to manage features and differences on a per-cpu basis. As several cpus share the same mci revision, this patch aggregates cpus that have the same IP revision in one defined constant. We use the at91mci_is_mci1rev2xx() funtion name not to mess with newer Atmel sd/mmc IP called "MCI2". _rev2 naming could have been confusing... Signed-off-by: Nicolas Ferre Cc: Wolfgang Muees Cc: Andrew Victor Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/at91_mci.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 8327daebb39..55507dacb78 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -78,6 +78,17 @@ #define DRIVER_NAME "at91_mci" +static inline int at91mci_is_mci1rev2xx(void) +{ + return ( cpu_is_at91sam9260() + || cpu_is_at91sam9263() + || cpu_is_at91cap9() + || cpu_is_at91sam9rl() + || cpu_is_at91sam9g10() + || cpu_is_at91sam9g20() + ); +} + #define FL_SENT_COMMAND (1 << 0) #define FL_SENT_STOP (1 << 1) @@ -204,8 +215,8 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data size = data->blksz * data->blocks; len = data->sg_len; - /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + /* MCI1 rev2xx Data Write Operation and number of bytes erratum */ + if (at91mci_is_mci1rev2xx()) if (host->total_length == 12) memset(dmabuf, 0, 12); @@ -398,7 +409,7 @@ static void at91_mci_enable(struct at91mci_host *host) at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); mr = AT91_MCI_PDCMODE | 0x34a; - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + if (at91mci_is_mci1rev2xx()) mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; at91_mci_write(host, AT91_MCI_MR, mr); @@ -555,10 +566,10 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command */ host->total_length = block_length * blocks; /* - * AT91SAM926[0/3] Data Write Operation and + * MCI1 rev2xx Data Write Operation and * number of bytes erratum */ - if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) + if (at91mci_is_mci1rev2xx()) if (host->total_length < 12) host->total_length = 12; @@ -943,7 +954,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) host->bus_mode = 0; host->board = pdev->dev.platform_data; if (host->board->wire4) { - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + if (at91mci_is_mci1rev2xx()) mmc->caps |= MMC_CAP_4_BIT_DATA; else dev_warn(&pdev->dev, "4 wire bus mode not supported" @@ -959,8 +970,8 @@ static int __init at91_mci_probe(struct platform_device *pdev) } /* Add SDIO capability when available */ - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) { - /* AT91SAM9260/9263 erratum */ + if (at91mci_is_mci1rev2xx()) { + /* at91mci MCI1 rev2xx sdio interrupt erratum */ if (host->board->wire4 || !host->board->slot_b) mmc->caps |= MMC_CAP_SDIO_IRQ; } -- cgit v1.2.3-18-g5258