From bec9d4e5939987053169a9bb48fc58b6a2d3e237 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 17 Sep 2012 16:45:10 +0800 Subject: mmc: sdhci: Test cd-gpio instead of SDHCI presence when probing Previously to this patch, an SDHCI platform that uses a GPIO for card detection instead of the internal SDHCI_CARD_PRESENT bit on the presence register would fail to detect a new card. Some drivers worked around this in various ways: esdhc-imx defines an IO accessor to fake the presence bit being true, s3c turns on polling (which stops the SDHCI driver from checking the bit) after a card's inserted. But none of this should be necessary; the real fix is to check whether we're using a GPIO and avoid relying on the presence bit if so, as this patch implements. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/mmc/host/sdhci.c') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index d98b1992d77..0e15c79014f 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "sdhci.h" @@ -1293,6 +1294,13 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) present = sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT; + /* If we're using a cd-gpio, testing the presence bit might fail. */ + if (!present) { + int ret = mmc_gpio_get_cd(host->mmc); + if (ret > 0) + present = true; + } + if (!present || host->flags & SDHCI_DEVICE_DEAD) { host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); -- cgit v1.2.3-18-g5258