From 80d3ac77a84987d5132726f3d7cef342a280f7d9 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Wed, 24 May 2006 15:07:09 -0500 Subject: [SCSI] mptfusion: move fc event/reset handling to mptfc Move fibre channel event and reset handling to mptfc. This will result in fewer changes over time that need to be applied to either mptbase.c or mptscsih.c. Signed-off-by: Michael Reed Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 187 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 184 insertions(+), 3 deletions(-) (limited to 'drivers/message/fusion/mptfc.c') diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 856487741ef..e518bc97f8c 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -596,6 +596,110 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) return err; } +/* + * mptfc_GetFcPortPage0 - Fetch FCPort config Page0. + * @ioc: Pointer to MPT_ADAPTER structure + * @portnum: IOC Port number + * + * Return: 0 for success + * -ENOMEM if no memory available + * -EPERM if not allowed due to ISR context + * -EAGAIN if no msg frames currently available + * -EFAULT for non-successful reply or no reply (timeout) + * -EINVAL portnum arg out of range (hardwired to two elements) + */ +static int +mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) +{ + ConfigPageHeader_t hdr; + CONFIGPARMS cfg; + FCPortPage0_t *ppage0_alloc; + FCPortPage0_t *pp0dest; + dma_addr_t page0_dma; + int data_sz; + int copy_sz; + int rc; + int count = 400; + + if (portnum > 1) + return -EINVAL; + + /* Get FCPort Page 0 header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT; + cfg.cfghdr.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = portnum; + cfg.timeout = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + return rc; + + if (hdr.PageLength == 0) + return 0; + + data_sz = hdr.PageLength * 4; + rc = -ENOMEM; + ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); + if (ppage0_alloc) { + + try_again: + memset((u8 *)ppage0_alloc, 0, data_sz); + cfg.physAddr = page0_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if ((rc = mpt_config(ioc, &cfg)) == 0) { + /* save the data */ + pp0dest = &ioc->fc_port_page0[portnum]; + copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz); + memcpy(pp0dest, ppage0_alloc, copy_sz); + + /* + * Normalize endianness of structure data, + * by byte-swapping all > 1 byte fields! + */ + pp0dest->Flags = le32_to_cpu(pp0dest->Flags); + pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier); + pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low); + pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High); + pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low); + pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High); + pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass); + pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds); + pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed); + pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize); + pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low); + pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High); + pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low); + pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High); + pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount); + pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators); + + /* + * if still doing discovery, + * hang loose a while until finished + */ + if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { + if (count-- > 0) { + msleep_interruptible(100); + goto try_again; + } + printk(MYIOC_s_INFO_FMT "Firmware discovery not" + " complete.\n", + ioc->name); + } + } + + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); + } + + return rc; +} + static void mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum) { @@ -651,7 +755,7 @@ mptfc_rescan_devices(void *arg) * will reregister existing rports */ for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) mptbase_GetFcPortPage0(ioc, ii); + (void) mptfc_GetFcPortPage0(ioc, ii); mptfc_init_host_attr(ioc,ii); /* refresh */ mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev); } @@ -753,6 +857,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_mptfc_probe; } + spin_lock_init(&ioc->fc_rescan_work_lock); INIT_WORK(&ioc->fc_rescan_work, mptfc_rescan_devices,(void *)ioc); spin_lock_irqsave(&ioc->FreeQlock, flags); @@ -888,6 +993,14 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (!ioc->fc_rescan_work_q) goto out_mptfc_probe; + /* + * Pre-fetch FC port WWN and stuff... + * (FCPortPage0_t stuff) + */ + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + (void) mptfc_GetFcPortPage0(ioc, ii); + } + /* * scan for rports - * by doing it via the workqueue, some locking is eliminated @@ -917,6 +1030,74 @@ static struct pci_driver mptfc_driver = { #endif }; +static int +mptfc_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) +{ + MPT_SCSI_HOST *hd; + u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; + unsigned long flags; + int rc=1; + + devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n", + ioc->name, event)); + + if (ioc->sh == NULL || + ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL)) + return 1; + + switch (event) { + case MPI_EVENT_RESCAN: + spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); + if (ioc->fc_rescan_work_q) { + if (ioc->fc_rescan_work_count++ == 0) { + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_rescan_work); + } + } + spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); + break; + default: + rc = mptscsih_event_process(ioc,pEvReply); + break; + } + return rc; +} + +static int +mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) +{ + int rc; + unsigned long flags; + + rc = mptscsih_ioc_reset(ioc,reset_phase); + if (rc == 0) + return rc; + + + dtmprintk((KERN_WARNING MYNAM + ": IOC %s_reset routed to FC host driver!\n", + reset_phase==MPT_IOC_SETUP_RESET ? "setup" : ( + reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post"))); + + if (reset_phase == MPT_IOC_SETUP_RESET) { + } + + else if (reset_phase == MPT_IOC_PRE_RESET) { + } + + else { /* MPT_IOC_POST_RESET */ + spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); + if (ioc->fc_rescan_work_q) { + if (ioc->fc_rescan_work_count++ == 0) { + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_rescan_work); + } + } + spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); + } + return 1; +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mptfc_init - Register MPT adapter(s) as SCSI host(s) with @@ -945,12 +1126,12 @@ mptfc_init(void) mptfcTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTFC_DRIVER); mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER); - if (mpt_event_register(mptfcDoneCtx, mptscsih_event_process) == 0) { + if (mpt_event_register(mptfcDoneCtx, mptfc_event_process) == 0) { devtverboseprintk((KERN_INFO MYNAM ": Registered for IOC event notifications\n")); } - if (mpt_reset_register(mptfcDoneCtx, mptscsih_ioc_reset) == 0) { + if (mpt_reset_register(mptfcDoneCtx, mptfc_ioc_reset) == 0) { dprintk((KERN_INFO MYNAM ": Registered for IOC reset notifications\n")); } -- cgit v1.2.3-18-g5258 From ca2f938efe71ca48cbc689db4df8d4f04b5d8f07 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Wed, 24 May 2006 15:07:24 -0500 Subject: [SCSI] mptfc: set fibre channel fw target missing timers to one second The fibre channel firmware provides a timer which is similar in purpose to the fibre channel transport's device loss timer. The effect of this timer is to extend the total time that a target will be missing beyond the value associated with the transport's timer. This patch changes the firmware timer to a default of one second which significantly reduces the lag between when a target goes missing and the notification of the fibre channel transport. Signed-off-by: Michael Reed Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 171 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 162 insertions(+), 9 deletions(-) (limited to 'drivers/message/fusion/mptfc.c') diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index e518bc97f8c..918aca0146f 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -169,13 +169,6 @@ static struct fc_function_template mptfc_transport_functions = { }; -/* FIXME! values controlling firmware RESCAN event - * need to be set low to allow dev_loss_tmo to - * work as expected. Currently, firmware doesn't - * notify driver of RESCAN event until some number - * of seconds elapse. This value can be set via - * lsiutil. - */ static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) { @@ -700,6 +693,153 @@ mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) return rc; } +static int +mptfc_WriteFcPortPage1(MPT_ADAPTER *ioc, int portnum) +{ + ConfigPageHeader_t hdr; + CONFIGPARMS cfg; + int rc; + + if (portnum > 1) + return -EINVAL; + + if (!(ioc->fc_data.fc_port_page1[portnum].data)) + return -EINVAL; + + /* get fcport page 1 header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 1; + hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT; + cfg.cfghdr.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = portnum; + cfg.timeout = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + return rc; + + if (hdr.PageLength == 0) + return -ENODEV; + + if (hdr.PageLength*4 != ioc->fc_data.fc_port_page1[portnum].pg_sz) + return -EINVAL; + + cfg.physAddr = ioc->fc_data.fc_port_page1[portnum].dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + cfg.dir = 1; + + rc = mpt_config(ioc, &cfg); + + return rc; +} + +static int +mptfc_GetFcPortPage1(MPT_ADAPTER *ioc, int portnum) +{ + ConfigPageHeader_t hdr; + CONFIGPARMS cfg; + FCPortPage1_t *page1_alloc; + dma_addr_t page1_dma; + int data_sz; + int rc; + + if (portnum > 1) + return -EINVAL; + + /* get fcport page 1 header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 1; + hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT; + cfg.cfghdr.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = portnum; + cfg.timeout = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + return rc; + + if (hdr.PageLength == 0) + return -ENODEV; + +start_over: + + if (ioc->fc_data.fc_port_page1[portnum].data == NULL) { + data_sz = hdr.PageLength * 4; + if (data_sz < sizeof(FCPortPage1_t)) + data_sz = sizeof(FCPortPage1_t); + + page1_alloc = (FCPortPage1_t *) pci_alloc_consistent(ioc->pcidev, + data_sz, + &page1_dma); + if (!page1_alloc) + return -ENOMEM; + } + else { + page1_alloc = ioc->fc_data.fc_port_page1[portnum].data; + page1_dma = ioc->fc_data.fc_port_page1[portnum].dma; + data_sz = ioc->fc_data.fc_port_page1[portnum].pg_sz; + if (hdr.PageLength * 4 > data_sz) { + ioc->fc_data.fc_port_page1[portnum].data = NULL; + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) + page1_alloc, page1_dma); + goto start_over; + } + } + + memset(page1_alloc,0,data_sz); + + cfg.physAddr = page1_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if ((rc = mpt_config(ioc, &cfg)) == 0) { + ioc->fc_data.fc_port_page1[portnum].data = page1_alloc; + ioc->fc_data.fc_port_page1[portnum].pg_sz = data_sz; + ioc->fc_data.fc_port_page1[portnum].dma = page1_dma; + } + else { + ioc->fc_data.fc_port_page1[portnum].data = NULL; + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) + page1_alloc, page1_dma); + } + + return rc; +} + +static void +mptfc_SetFcPortPage1_defaults(MPT_ADAPTER *ioc) +{ + int ii; + FCPortPage1_t *pp1; + + #define MPTFC_FW_DEVICE_TIMEOUT (1) + #define MPTFC_FW_IO_PEND_TIMEOUT (1) + #define ON_FLAGS (MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY) + #define OFF_FLAGS (MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS) + + for (ii=0; iifacts.NumberOfPorts; ii++) { + if (mptfc_GetFcPortPage1(ioc, ii) != 0) + continue; + pp1 = ioc->fc_data.fc_port_page1[ii].data; + if ((pp1->InitiatorDeviceTimeout == MPTFC_FW_DEVICE_TIMEOUT) + && (pp1->InitiatorIoPendTimeout == MPTFC_FW_IO_PEND_TIMEOUT) + && ((pp1->Flags & ON_FLAGS) == ON_FLAGS) + && ((pp1->Flags & OFF_FLAGS) == 0)) + continue; + pp1->InitiatorDeviceTimeout = MPTFC_FW_DEVICE_TIMEOUT; + pp1->InitiatorIoPendTimeout = MPTFC_FW_IO_PEND_TIMEOUT; + pp1->Flags &= ~OFF_FLAGS; + pp1->Flags |= ON_FLAGS; + mptfc_WriteFcPortPage1(ioc, ii); + } +} + + static void mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum) { @@ -1000,6 +1140,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { (void) mptfc_GetFcPortPage0(ioc, ii); } + mptfc_SetFcPortPage1_defaults(ioc); /* * scan for rports - @@ -1086,6 +1227,7 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) } else { /* MPT_IOC_POST_RESET */ + mptfc_SetFcPortPage1_defaults(ioc); spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); if (ioc->fc_rescan_work_q) { if (ioc->fc_rescan_work_count++ == 0) { @@ -1112,8 +1254,8 @@ mptfc_init(void) show_mptmod_ver(my_NAME, my_VERSION); - /* sanity check module parameter */ - if (mptfc_dev_loss_tmo == 0) + /* sanity check module parameters */ + if (mptfc_dev_loss_tmo <= 0) mptfc_dev_loss_tmo = MPTFC_DEV_LOSS_TMO; mptfc_transport_template = @@ -1156,6 +1298,7 @@ mptfc_remove(struct pci_dev *pdev) struct mptfc_rport_info *p, *n; struct workqueue_struct *work_q; unsigned long flags; + int ii; /* destroy workqueue */ if ((work_q=ioc->fc_rescan_work_q)) { @@ -1172,6 +1315,16 @@ mptfc_remove(struct pci_dev *pdev) kfree(p); } + for (ii=0; iifacts.NumberOfPorts; ii++) { + if (ioc->fc_data.fc_port_page1[ii].data) { + pci_free_consistent(ioc->pcidev, + ioc->fc_data.fc_port_page1[ii].pg_sz, + (u8 *) ioc->fc_data.fc_port_page1[ii].data, + ioc->fc_data.fc_port_page1[ii].dma); + ioc->fc_data.fc_port_page1[ii].data = NULL; + } + } + mptscsih_remove(pdev); } -- cgit v1.2.3-18-g5258 From 419835e285c3e39cd62c8c8426da0aebea9cd89f Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Wed, 24 May 2006 15:07:40 -0500 Subject: [SCSI] mptfc: fix fibre channel infinite request/response loop While doing board reset testing I was able to put the system in an infinite request/response loop between the scsi layer and mptscsih_qcmd() by aborting the reset. This patch installs a "SETUP RESET" handler which calls fc_remote_port_delete() for all registered rports. This blocks the target which prevents the loop. Additionally, should the reset fail to complete, the transport will now terminate i/o to the target. Signed-off-by: Michael Reed Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 36 ++++++++++++++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-) (limited to 'drivers/message/fusion/mptfc.c') diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 918aca0146f..770df553047 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -580,10 +580,10 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) #ifdef DMPT_DEBUG_FC if (unlikely(err)) { dfcprintk ((MYIOC_s_INFO_FMT - "mptfc_qcmd.%d: %d:%d, mptscsih_qcmd returns non-zero.\n", + "mptfc_qcmd.%d: %d:%d, mptscsih_qcmd returns non-zero, (%x).\n", ((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->name, ((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->sh->host_no, - SCpnt->device->id,SCpnt->device->lun)); + SCpnt->device->id,SCpnt->device->lun,err)); } #endif return err; @@ -872,6 +872,31 @@ mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum) fc_host_tgtid_bind_type(ioc->sh) = FC_TGTID_BIND_BY_WWPN; } +static void +mptfc_setup_reset(void *arg) +{ + MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; + u64 pn; + struct mptfc_rport_info *ri; + + /* reset about to happen, delete (block) all rports */ + list_for_each_entry(ri, &ioc->fc_rports, list) { + if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) { + ri->flags &= ~MPT_RPORT_INFO_FLAGS_REGISTERED; + fc_remote_port_delete(ri->rport); /* won't sleep */ + ri->rport = NULL; + + pn = (u64)ri->pg0.WWPN.High << 32 | + (u64)ri->pg0.WWPN.Low; + dfcprintk ((MYIOC_s_INFO_FMT + "mptfc_setup_reset.%d: %llx deleted\n", + ioc->name, + ioc->sh->host_no, + (unsigned long long)pn)); + } + } +} + static void mptfc_rescan_devices(void *arg) { @@ -999,6 +1024,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) spin_lock_init(&ioc->fc_rescan_work_lock); INIT_WORK(&ioc->fc_rescan_work, mptfc_rescan_devices,(void *)ioc); + INIT_WORK(&ioc->fc_setup_reset_work, mptfc_setup_reset, (void *)ioc); spin_lock_irqsave(&ioc->FreeQlock, flags); @@ -1221,6 +1247,12 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post"))); if (reset_phase == MPT_IOC_SETUP_RESET) { + spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); + if (ioc->fc_rescan_work_q) { + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_setup_reset_work); + } + spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); } else if (reset_phase == MPT_IOC_PRE_RESET) { -- cgit v1.2.3-18-g5258 From d6be06c84da9626b10443c664ee55bda96fb3514 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Wed, 24 May 2006 15:07:57 -0500 Subject: [SCSI] mptfc: abort of board reset leaves port dead requiring reboot The driver uses msleep_interruptible() in the code path responsible for resetting the card's ports via the lsiutil command. If a is received during the reset it can leave a port in such a state that the only way to regain its use is to reboot the system. Changing from msleep_interruptible() to msleep() corrects the problem. Signed-off-by: Michael Reed Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/message/fusion/mptfc.c') diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 770df553047..74714e5bcf0 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -678,7 +678,7 @@ mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) */ if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { if (count-- > 0) { - msleep_interruptible(100); + msleep(100); goto try_again; } printk(MYIOC_s_INFO_FMT "Firmware discovery not" -- cgit v1.2.3-18-g5258