From e21d98651ae42dc7c50e539296e88a73c1e78fd8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 30 Sep 2011 05:31:24 -0300 Subject: [media] V4L menu: reorganize the radio menu Move all USB radio devices to the top of the list and move all ISA devices to a separate menu. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Kconfig | 298 +++++++++++++++++++++++--------------------- 1 file changed, 157 insertions(+), 141 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 52798a111e1..e954781c90b 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -11,6 +11,162 @@ menuconfig RADIO_ADAPTERS if RADIO_ADAPTERS && VIDEO_V4L2 +config RADIO_SI470X + bool "Silicon Labs Si470x FM Radio Receiver support" + depends on VIDEO_V4L2 + +source "drivers/media/radio/si470x/Kconfig" + +config USB_MR800 + tristate "AverMedia MR 800 USB FM radio support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + To compile this driver as a module, choose M here: the + module will be called radio-mr800. + +config USB_DSBR + tristate "D-Link/GemTek USB FM radio support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + To compile this driver as a module, choose M here: the + module will be called dsbr100. + +config RADIO_MAXIRADIO + tristate "Guillemot MAXI Radio FM 2000 radio" + depends on VIDEO_V4L2 && PCI + ---help--- + Choose Y here if you have this radio card. This card may also be + found as Gemtek PCI FM. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-maxiradio. + + +config I2C_SI4713 + tristate "I2C driver for Silicon Labs Si4713 device" + depends on I2C && VIDEO_V4L2 + ---help--- + Say Y here if you want support to Si4713 I2C device. + This device driver supports only i2c bus. + + To compile this driver as a module, choose M here: the + module will be called si4713. + +config RADIO_SI4713 + tristate "Silicon Labs Si4713 FM Radio Transmitter support" + depends on I2C && VIDEO_V4L2 + select I2C_SI4713 + ---help--- + Say Y here if you want support to Si4713 FM Radio Transmitter. + This device can transmit audio through FM. It can transmit + RDS and RBDS signals as well. This module is the v4l2 radio + interface for the i2c driver of this device. + + To compile this driver as a module, choose M here: the + module will be called radio-si4713. + +config RADIO_TEA5764 + tristate "TEA5764 I2C FM radio support" + depends on I2C && VIDEO_V4L2 + ---help--- + Say Y here if you want to use the TEA5764 FM chip found in + EZX phones. This FM chip is present in EZX phones from Motorola, + connected to internal pxa I2C bus. + + To compile this driver as a module, choose M here: the + module will be called radio-tea5764. + +config RADIO_TEA5764_XTAL + bool "TEA5764 crystal reference" + depends on RADIO_TEA5764=y + default y + help + Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N + here if TEA5764 reference frequency is connected in FREQIN. + +config RADIO_SAA7706H + tristate "SAA7706H Car Radio DSP" + depends on I2C && VIDEO_V4L2 + ---help--- + Say Y here if you want to use the SAA7706H Car radio Digital + Signal Processor, found for instance on the Russellville development + board. On the russellville the device is connected to internal + timberdale I2C bus. + + To compile this driver as a module, choose M here: the + module will be called SAA7706H. + +config RADIO_TEF6862 + tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" + depends on I2C && VIDEO_V4L2 + ---help--- + Say Y here if you want to use the TEF6862 Car Radio Enhanced + Selectivity Tuner, found for instance on the Russellville development + board. On the russellville the device is connected to internal + timberdale I2C bus. + + To compile this driver as a module, choose M here: the + module will be called TEF6862. + +config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE && VIDEO_V4L2 + depends on I2C # for RADIO_SAA7706H + select RADIO_TEF6862 + select RADIO_SAA7706H + ---help--- + This is a kind of umbrella driver for the Radio Tuner and DSP + found behind the Timberdale FPGA on the Russellville board. + Enabling this driver will automatically select the DSP and tuner. + +config RADIO_WL1273 + tristate "Texas Instruments WL1273 I2C FM Radio" + depends on I2C && VIDEO_V4L2 + select MFD_CORE + select MFD_WL1273_CORE + select FW_LOADER + ---help--- + Choose Y here if you have this FM radio chip. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux 2 API. Information on + this API and pointers to "v4l2" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-wl1273. + +# TI's ST based wl128x FM radio +source "drivers/media/radio/wl128x/Kconfig" + +# +# ISA drivers configuration +# + +menuconfig V4L_RADIO_ISA_DRIVERS + bool "ISA radio devices" + depends on ISA + default n + ---help--- + Say Y here to enable support for these ISA drivers. + +if V4L_RADIO_ISA_DRIVERS + config RADIO_CADET tristate "ADS Cadet AM/FM Tuner" depends on ISA && VIDEO_V4L2 @@ -151,21 +307,6 @@ config RADIO_GEMTEK_PROBE following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 0x28c. -config RADIO_MAXIRADIO - tristate "Guillemot MAXI Radio FM 2000 radio" - depends on VIDEO_V4L2 && PCI - ---help--- - Choose Y here if you have this radio card. This card may also be - found as Gemtek PCI FM. - - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - . - - To compile this driver as a module, choose M here: the - module will be called radio-maxiradio. - config RADIO_MIROPCM20 tristate "miroSOUND PCM20 radio" depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND @@ -316,131 +457,6 @@ config RADIO_ZOLTRIX_PORT help Enter the I/O port of your Zoltrix radio card. -config I2C_SI4713 - tristate "I2C driver for Silicon Labs Si4713 device" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want support to Si4713 I2C device. - This device driver supports only i2c bus. - - To compile this driver as a module, choose M here: the - module will be called si4713. - -config RADIO_SI4713 - tristate "Silicon Labs Si4713 FM Radio Transmitter support" - depends on I2C && VIDEO_V4L2 - select I2C_SI4713 - ---help--- - Say Y here if you want support to Si4713 FM Radio Transmitter. - This device can transmit audio through FM. It can transmit - RDS and RBDS signals as well. This module is the v4l2 radio - interface for the i2c driver of this device. - - To compile this driver as a module, choose M here: the - module will be called radio-si4713. - -config USB_DSBR - tristate "D-Link/GemTek USB FM radio support" - depends on USB && VIDEO_V4L2 - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - To compile this driver as a module, choose M here: the - module will be called dsbr100. - -config RADIO_SI470X - bool "Silicon Labs Si470x FM Radio Receiver support" - depends on VIDEO_V4L2 - -source "drivers/media/radio/si470x/Kconfig" - -config USB_MR800 - tristate "AverMedia MR 800 USB FM radio support" - depends on USB && VIDEO_V4L2 - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - To compile this driver as a module, choose M here: the - module will be called radio-mr800. - -config RADIO_TEA5764 - tristate "TEA5764 I2C FM radio support" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want to use the TEA5764 FM chip found in - EZX phones. This FM chip is present in EZX phones from Motorola, - connected to internal pxa I2C bus. - - To compile this driver as a module, choose M here: the - module will be called radio-tea5764. - -config RADIO_TEA5764_XTAL - bool "TEA5764 crystal reference" - depends on RADIO_TEA5764=y - default y - help - Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N - here if TEA5764 reference frequency is connected in FREQIN. - -config RADIO_SAA7706H - tristate "SAA7706H Car Radio DSP" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want to use the SAA7706H Car radio Digital - Signal Processor, found for instance on the Russellville development - board. On the russellville the device is connected to internal - timberdale I2C bus. - - To compile this driver as a module, choose M here: the - module will be called SAA7706H. - -config RADIO_TEF6862 - tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want to use the TEF6862 Car Radio Enhanced - Selectivity Tuner, found for instance on the Russellville development - board. On the russellville the device is connected to internal - timberdale I2C bus. - - To compile this driver as a module, choose M here: the - module will be called TEF6862. - -config RADIO_TIMBERDALE - tristate "Enable the Timberdale radio driver" - depends on MFD_TIMBERDALE && VIDEO_V4L2 - depends on I2C # for RADIO_SAA7706H - select RADIO_TEF6862 - select RADIO_SAA7706H - ---help--- - This is a kind of umbrella driver for the Radio Tuner and DSP - found behind the Timberdale FPGA on the Russellville board. - Enabling this driver will automatically select the DSP and tuner. - -config RADIO_WL1273 - tristate "Texas Instruments WL1273 I2C FM Radio" - depends on I2C && VIDEO_V4L2 - select MFD_CORE - select MFD_WL1273_CORE - select FW_LOADER - ---help--- - Choose Y here if you have this FM radio chip. - - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux 2 API. Information on - this API and pointers to "v4l2" programs may be found at - . - - To compile this driver as a module, choose M here: the - module will be called radio-wl1273. - -# TI's ST based wl128x FM radio -source "drivers/media/radio/wl128x/Kconfig" +endif # V4L_RADIO_ISA_DRIVERS endif # RADIO_ADAPTERS -- cgit v1.2.3-18-g5258