From d56410e0a594150c5ca06319da7bc8901c4d455e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 25 Mar 2006 09:19:53 -0300 Subject: V4L/DVB (3599b): Whitespace cleanups under drivers/media Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ov511.c | 92 ++++++++++++++++++++++----------------------- 1 file changed, 46 insertions(+), 46 deletions(-) (limited to 'drivers/media/video/ov511.c') diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index da44579d6f2..fdc8e3f1393 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -15,7 +15,7 @@ * * Based on the Linux CPiA driver written by Peter Pregler, * Scott J. Bertin and Johannes Erdfelt. - * + * * Please see the file: Documentation/usb/ov511.txt * and the website at: http://alpha.dyndns.org/ov511 * for more info. @@ -433,7 +433,7 @@ reg_w_mask(struct usb_ov511 *ov, return (reg_w(ov, reg, newval)); } -/* +/* * Writes multiple (n) byte value to a single register. Only valid with certain * registers (0x30 and 0xc4 - 0xce). */ @@ -629,7 +629,7 @@ ov511_i2c_write_internal(struct usb_ov511 *ov, /* Retry until idle */ do rc = reg_r(ov, R511_I2C_CTL); - while (rc > 0 && ((rc&1) == 0)); + while (rc > 0 && ((rc&1) == 0)); if (rc < 0) break; @@ -1752,7 +1752,7 @@ sensor_set_picture(struct usb_ov511 *ov, struct video_picture *p) ov->whiteness = p->whiteness; /* Don't return error if a setting is unsupported, or rest of settings - * will not be performed */ + * will not be performed */ rc = sensor_set_contrast(ov, p->contrast); if (FATAL_ERROR(rc)) @@ -1781,7 +1781,7 @@ sensor_get_picture(struct usb_ov511 *ov, struct video_picture *p) PDEBUG(4, "sensor_get_picture"); /* Don't return error if a setting is unsupported, or rest of settings - * will not be performed */ + * will not be performed */ rc = sensor_get_contrast(ov, &(p->contrast)); if (FATAL_ERROR(rc)) @@ -2251,7 +2251,7 @@ mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height, /******** Clock programming ********/ - /* The OV6620 needs special handling. This prevents the + /* The OV6620 needs special handling. This prevents the * severe banding that normally occurs */ if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) { @@ -2326,7 +2326,7 @@ set_ov_sensor_window(struct usb_ov511 *ov, int width, int height, int mode, int sub_flag) { int ret; - int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize; + int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize; int hoffset, voffset, hwscale = 0, vwscale = 0; /* The different sensor ICs handle setting up of window differently. @@ -2575,7 +2575,7 @@ ov518_mode_init_regs(struct usb_ov511 *ov, /* OV518 needs U and V swapped */ i2c_w_mask(ov, 0x15, 0x00, 0x01); - if (mode == VIDEO_PALETTE_GREY) { + if (mode == VIDEO_PALETTE_GREY) { /* Set 16-bit input format (UV data are ignored) */ reg_w_mask(ov, 0x20, 0x00, 0x08); @@ -2894,7 +2894,7 @@ make_8x8(unsigned char *pIn, unsigned char *pOut, int w) * ... ... ... * 56 57 ... 63 120 121 ... 127 248 249 ... 255 * - */ + */ static void yuv400raw_to_yuv400p(struct ov511_frame *frame, unsigned char *pIn0, unsigned char *pOut0) @@ -2923,7 +2923,7 @@ yuv400raw_to_yuv400p(struct ov511_frame *frame, * * 0 1 ... 7 * 8 9 ... 15 - * ... + * ... * 56 57 ... 63 * * U and V are shipped at half resolution (1 U,V sample -> one 2x2 block). @@ -3034,7 +3034,7 @@ decompress(struct usb_ov511 *ov, struct ov511_frame *frame, */ static void deinterlace(struct ov511_frame *frame, int rawformat, - unsigned char *pIn0, unsigned char *pOut0) + unsigned char *pIn0, unsigned char *pOut0) { const int fieldheight = frame->rawheight / 2; const int fieldpix = fieldheight * frame->rawwidth; @@ -3112,7 +3112,7 @@ ov51x_postprocess_grey(struct usb_ov511 *ov, struct ov511_frame *frame) frame->tempdata); deinterlace(frame, RAWFMT_YUV400, frame->tempdata, - frame->data); + frame->data); } else { if (frame->compressed) decompress(ov, frame, frame->rawdata, @@ -3136,7 +3136,7 @@ ov51x_postprocess_yuv420(struct usb_ov511 *ov, struct ov511_frame *frame) frame->tempdata); deinterlace(frame, RAWFMT_YUV420, frame->tempdata, - frame->data); + frame->data); } else { if (frame->compressed) decompress(ov, frame, frame->rawdata, frame->data); @@ -3226,7 +3226,7 @@ ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n) frame->rawwidth = ((int)(in[9]) + 1) * 8; frame->rawheight = ((int)(in[10]) + 1) * 8; - PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d", + PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d", ov->curframe, pnum, frame->rawwidth, frame->rawheight, frame->bytes_recvd); @@ -3527,10 +3527,10 @@ ov51x_isoc_irq(struct urb *urb, struct pt_regs *regs) return; } - if (urb->status == -ENOENT || urb->status == -ECONNRESET) { - PDEBUG(4, "URB unlinked"); - return; - } + if (urb->status == -ENOENT || urb->status == -ECONNRESET) { + PDEBUG(4, "URB unlinked"); + return; + } if (urb->status != -EINPROGRESS && urb->status != 0) { err("ERROR: urb->status=%d: %s", urb->status, @@ -4627,8 +4627,8 @@ ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma) PDEBUG(4, "mmap: %ld (%lX) bytes", size, size); if (size > (((OV511_NUMFRAMES - * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight) - + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))) + * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight) + + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))) return -EINVAL; if (mutex_lock_interruptible(&ov->lock)) @@ -5062,7 +5062,7 @@ ov6xx0_configure(struct usb_ov511 *ov) } /* This initializes the KS0127 and KS0127B video decoders. */ -static int +static int ks0127_configure(struct usb_ov511 *ov) { int rc; @@ -5193,7 +5193,7 @@ saa7111a_configure(struct usb_ov511 *ov) return -1; /* Detect version of decoder. This must be done after writing the - * initial regs or the decoder will lock up. */ + * initial regs or the decoder will lock up. */ rc = i2c_r(ov, 0x00); if (rc < 0) { @@ -5216,13 +5216,13 @@ saa7111a_configure(struct usb_ov511 *ov) } /* This initializes the OV511/OV511+ and the sensor */ -static int +static int ov511_configure(struct usb_ov511 *ov) { static struct ov511_regvals aRegvalsInit511[] = { { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, - { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, - { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, + { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, { OV511_REG_BUS, R51x_SYS_RESET, 0x3f }, { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, @@ -5269,7 +5269,7 @@ ov511_configure(struct usb_ov511 *ov) err("Please notify " EMAIL " of the name,"); err("manufacturer, model, and this number of your camera."); err("Also include the output of the detection process."); - } + } if (ov->customid == 70) /* USB Life TV (PAL/SECAM) */ ov->pal = 1; @@ -5336,17 +5336,17 @@ ov511_configure(struct usb_ov511 *ov) if (i2c_w(ov, 0x10, 0x00) < 0) { err("Can't determine sensor slave IDs"); - goto error; + goto error; } else { if (ks0127_configure(ov) < 0) { err("Failed to configure KS0127"); - goto error; + goto error; } } } else { if (saa7111a_configure(ov) < 0) { err("Failed to configure SAA7111A"); - goto error; + goto error; } } } else { @@ -5356,13 +5356,13 @@ ov511_configure(struct usb_ov511 *ov) } else { if (ov6xx0_configure(ov) < 0) { err("Failed to configure OV6xx0"); - goto error; + goto error; } } } else { if (ov7xx0_configure(ov) < 0) { err("Failed to configure OV7xx0"); - goto error; + goto error; } } @@ -5381,12 +5381,12 @@ ov518_configure(struct usb_ov511 *ov) /* For 518 and 518+ */ static struct ov511_regvals aRegvalsInit518[] = { { OV511_REG_BUS, R51x_SYS_RESET, 0x40 }, - { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, - { OV511_REG_BUS, R51x_SYS_RESET, 0x3e }, + { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x3e }, { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, { OV511_REG_BUS, R51x_SYS_RESET, 0x00 }, { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, - { OV511_REG_BUS, 0x46, 0x00 }, + { OV511_REG_BUS, 0x46, 0x00 }, { OV511_REG_BUS, 0x5d, 0x03 }, { OV511_DONE_BUS, 0x0, 0x00}, }; @@ -5517,7 +5517,7 @@ ov518_configure(struct usb_ov511 *ov) if (init_ov_sensor(ov) < 0) { err("Can't determine sensor slave IDs"); - goto error; + goto error; } else { err("Detected unsupported OV8xx0 sensor"); goto error; @@ -5525,13 +5525,13 @@ ov518_configure(struct usb_ov511 *ov) } else { if (ov6xx0_configure(ov) < 0) { err("Failed to configure OV6xx0"); - goto error; + goto error; } } } else { if (ov7xx0_configure(ov) < 0) { err("Failed to configure OV7xx0"); - goto error; + goto error; } } @@ -5564,28 +5564,28 @@ static ssize_t show_custom_id(struct class_device *cd, char *buf) { struct usb_ov511 *ov = cd_to_ov(cd); return sprintf(buf, "%d\n", ov->customid); -} +} static CLASS_DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL); static ssize_t show_model(struct class_device *cd, char *buf) { struct usb_ov511 *ov = cd_to_ov(cd); return sprintf(buf, "%s\n", ov->desc); -} +} static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL); static ssize_t show_bridge(struct class_device *cd, char *buf) { struct usb_ov511 *ov = cd_to_ov(cd); return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge)); -} +} static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL); static ssize_t show_sensor(struct class_device *cd, char *buf) { struct usb_ov511 *ov = cd_to_ov(cd); return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor)); -} +} static CLASS_DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL); static ssize_t show_brightness(struct class_device *cd, char *buf) @@ -5597,7 +5597,7 @@ static ssize_t show_brightness(struct class_device *cd, char *buf) return -ENODEV; sensor_get_brightness(ov, &x); return sprintf(buf, "%d\n", x >> 8); -} +} static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL); static ssize_t show_saturation(struct class_device *cd, char *buf) @@ -5609,7 +5609,7 @@ static ssize_t show_saturation(struct class_device *cd, char *buf) return -ENODEV; sensor_get_saturation(ov, &x); return sprintf(buf, "%d\n", x >> 8); -} +} static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL); static ssize_t show_contrast(struct class_device *cd, char *buf) @@ -5621,7 +5621,7 @@ static ssize_t show_contrast(struct class_device *cd, char *buf) return -ENODEV; sensor_get_contrast(ov, &x); return sprintf(buf, "%d\n", x >> 8); -} +} static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL); static ssize_t show_hue(struct class_device *cd, char *buf) @@ -5633,7 +5633,7 @@ static ssize_t show_hue(struct class_device *cd, char *buf) return -ENODEV; sensor_get_hue(ov, &x); return sprintf(buf, "%d\n", x >> 8); -} +} static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL); static ssize_t show_exposure(struct class_device *cd, char *buf) @@ -5645,7 +5645,7 @@ static ssize_t show_exposure(struct class_device *cd, char *buf) return -ENODEV; sensor_get_exposure(ov, &exp); return sprintf(buf, "%d\n", exp >> 8); -} +} static CLASS_DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL); static void ov_create_sysfs(struct video_device *vdev) -- cgit v1.2.3-18-g5258