From cfae5c9bb66325cd32d5f2ee41f14749f062a53c Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 1 May 2008 14:50:11 -0700 Subject: [SCSI] scsi_dh: Use SCSI device handler in dm-multipath This patch converts dm-mpath to use scsi device handlers instead of dm's hardware handlers. This patch does not add any new functionality. Old behaviors remain and userspace tools work as is except that arguments supplied with hardware handler are ignored. One behavioral exception is: Activation of a path is synchronous in this patch, opposed to the older behavior of being asynchronous (changed in patch 07: scsi_dh: Add a single threaded workqueue for initializing a path) Note: There is no need to get a reference for the device handler module (as it was done in the dm hardware handler case) here as the reference is held when the device was first found. Instead we check and make sure that support for the specified device is present at table load time. Signed-off-by: Chandra Seetharaman Signed-off-by: Mike Christie Acked-by: Alasdair G Kergon Signed-off-by: James Bottomley --- drivers/md/Kconfig | 1 + drivers/md/dm-mpath.c | 131 ++++++++++++++++++++++++++++++-------------------- 2 files changed, 81 insertions(+), 51 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 610af916891..5303af55d2c 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -252,6 +252,7 @@ config DM_ZERO config DM_MULTIPATH tristate "Multipath target" depends on BLK_DEV_DM + select SCSI_DH ---help--- Allow volume managers to support multipath hardware. diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index e7ee59e655d..e54ff372d71 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #define DM_MSG_PREFIX "multipath" @@ -61,7 +62,7 @@ struct multipath { spinlock_t lock; - struct hw_handler hw_handler; + const char *hw_handler_name; unsigned nr_priority_groups; struct list_head priority_groups; unsigned pg_init_required; /* pg_init needs calling? */ @@ -109,6 +110,7 @@ static struct kmem_cache *_mpio_cache; static struct workqueue_struct *kmultipathd; static void process_queued_ios(struct work_struct *work); static void trigger_event(struct work_struct *work); +static void pg_init_done(struct dm_path *, int); /*----------------------------------------------- @@ -193,18 +195,13 @@ static struct multipath *alloc_multipath(struct dm_target *ti) static void free_multipath(struct multipath *m) { struct priority_group *pg, *tmp; - struct hw_handler *hwh = &m->hw_handler; list_for_each_entry_safe(pg, tmp, &m->priority_groups, list) { list_del(&pg->list); free_priority_group(pg, m->ti); } - if (hwh->type) { - hwh->type->destroy(hwh); - dm_put_hw_handler(hwh->type); - } - + kfree(m->hw_handler_name); mempool_destroy(m->mpio_pool); kfree(m); } @@ -216,12 +213,10 @@ static void free_multipath(struct multipath *m) static void __switch_pg(struct multipath *m, struct pgpath *pgpath) { - struct hw_handler *hwh = &m->hw_handler; - m->current_pg = pgpath->pg; /* Must we initialise the PG first, and queue I/O till it's ready? */ - if (hwh->type && hwh->type->pg_init) { + if (m->hw_handler_name) { m->pg_init_required = 1; m->queue_io = 1; } else { @@ -409,7 +404,6 @@ static void process_queued_ios(struct work_struct *work) { struct multipath *m = container_of(work, struct multipath, process_queued_ios); - struct hw_handler *hwh = &m->hw_handler; struct pgpath *pgpath = NULL; unsigned init_required = 0, must_queue = 1; unsigned long flags; @@ -438,8 +432,11 @@ static void process_queued_ios(struct work_struct *work) out: spin_unlock_irqrestore(&m->lock, flags); - if (init_required) - hwh->type->pg_init(hwh, pgpath->pg->bypassed, &pgpath->path); + if (init_required) { + struct dm_path *path = &pgpath->path; + int ret = scsi_dh_activate(bdev_get_queue(path->dev->bdev)); + pg_init_done(path, ret); + } if (!must_queue) dispatch_queued_ios(m); @@ -652,8 +649,6 @@ static struct priority_group *parse_priority_group(struct arg_set *as, static int parse_hw_handler(struct arg_set *as, struct multipath *m) { - int r; - struct hw_handler_type *hwht; unsigned hw_argc; struct dm_target *ti = m->ti; @@ -661,30 +656,18 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m) {0, 1024, "invalid number of hardware handler args"}, }; - r = read_param(_params, shift(as), &hw_argc, &ti->error); - if (r) + if (read_param(_params, shift(as), &hw_argc, &ti->error)) return -EINVAL; if (!hw_argc) return 0; - hwht = dm_get_hw_handler(shift(as)); - if (!hwht) { + m->hw_handler_name = kstrdup(shift(as), GFP_KERNEL); + request_module("scsi_dh_%s", m->hw_handler_name); + if (scsi_dh_handler_exist(m->hw_handler_name) == 0) { ti->error = "unknown hardware handler type"; return -EINVAL; } - - m->hw_handler.md = dm_table_get_md(ti->table); - dm_put(m->hw_handler.md); - - r = hwht->create(&m->hw_handler, hw_argc - 1, as->argv); - if (r) { - dm_put_hw_handler(hwht); - ti->error = "hardware handler constructor failed"; - return r; - } - - m->hw_handler.type = hwht; consume(as, hw_argc - 1); return 0; @@ -1063,14 +1046,74 @@ void dm_pg_init_complete(struct dm_path *path, unsigned err_flags) spin_unlock_irqrestore(&m->lock, flags); } +static void pg_init_done(struct dm_path *path, int errors) +{ + struct pgpath *pgpath = path_to_pgpath(path); + struct priority_group *pg = pgpath->pg; + struct multipath *m = pg->m; + unsigned long flags; + + /* device or driver problems */ + switch (errors) { + case SCSI_DH_OK: + break; + case SCSI_DH_NOSYS: + if (!m->hw_handler_name) { + errors = 0; + break; + } + DMERR("Cannot failover device because scsi_dh_%s was not " + "loaded.", m->hw_handler_name); + /* + * Fail path for now, so we do not ping pong + */ + fail_path(pgpath); + break; + case SCSI_DH_DEV_TEMP_BUSY: + /* + * Probably doing something like FW upgrade on the + * controller so try the other pg. + */ + bypass_pg(m, pg, 1); + break; + /* TODO: For SCSI_DH_RETRY we should wait a couple seconds */ + case SCSI_DH_RETRY: + case SCSI_DH_IMM_RETRY: + case SCSI_DH_RES_TEMP_UNAVAIL: + if (pg_init_limit_reached(m, pgpath)) + fail_path(pgpath); + errors = 0; + break; + default: + /* + * We probably do not want to fail the path for a device + * error, but this is what the old dm did. In future + * patches we can do more advanced handling. + */ + fail_path(pgpath); + } + + spin_lock_irqsave(&m->lock, flags); + if (errors) { + DMERR("Could not failover device. Error %d.", errors); + m->current_pgpath = NULL; + m->current_pg = NULL; + } else if (!m->pg_init_required) { + m->queue_io = 0; + pg->bypassed = 0; + } + + m->pg_init_in_progress = 0; + queue_work(kmultipathd, &m->process_queued_ios); + spin_unlock_irqrestore(&m->lock, flags); +} + /* * end_io handling */ static int do_end_io(struct multipath *m, struct bio *bio, int error, struct dm_mpath_io *mpio) { - struct hw_handler *hwh = &m->hw_handler; - unsigned err_flags = MP_FAIL_PATH; /* Default behavior */ unsigned long flags; if (!error) @@ -1097,19 +1140,8 @@ static int do_end_io(struct multipath *m, struct bio *bio, } spin_unlock_irqrestore(&m->lock, flags); - if (hwh->type && hwh->type->error) - err_flags = hwh->type->error(hwh, bio); - - if (mpio->pgpath) { - if (err_flags & MP_FAIL_PATH) - fail_path(mpio->pgpath); - - if (err_flags & MP_BYPASS_PG) - bypass_pg(m, mpio->pgpath->pg, 1); - } - - if (err_flags & MP_ERROR_IO) - return -EIO; + if (mpio->pgpath) + fail_path(mpio->pgpath); requeue: dm_bio_restore(&mpio->details, bio); @@ -1194,7 +1226,6 @@ static int multipath_status(struct dm_target *ti, status_type_t type, int sz = 0; unsigned long flags; struct multipath *m = (struct multipath *) ti->private; - struct hw_handler *hwh = &m->hw_handler; struct priority_group *pg; struct pgpath *p; unsigned pg_num; @@ -1214,12 +1245,10 @@ static int multipath_status(struct dm_target *ti, status_type_t type, DMEMIT("pg_init_retries %u ", m->pg_init_retries); } - if (hwh->type && hwh->type->status) - sz += hwh->type->status(hwh, type, result + sz, maxlen - sz); - else if (!hwh->type || type == STATUSTYPE_INFO) + if (!m->hw_handler_name || type == STATUSTYPE_INFO) DMEMIT("0 "); else - DMEMIT("1 %s ", hwh->type->name); + DMEMIT("1 %s ", m->hw_handler_name); DMEMIT("%u ", m->nr_priority_groups); -- cgit v1.2.3-18-g5258 From bab7cfc733f4453a502b7491b9ee37b091440ec4 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 1 May 2008 14:50:22 -0700 Subject: [SCSI] scsi_dh: Add a single threaded workqueue for initializing paths Before this patch set (SCSI hardware handlers), initialization of a path was done asynchronously. Doing that requires a workqueue in each device/hardware handler module and leads to unneccessary complication in the device handler code, making it difficult to read the code and follow the state diagram. Moving that workqueue to this level makes the device handler code simpler. Hence, the workqueue is moved to dm level. A new workqueue is added instead of adding it to the existing workqueue (kmpathd) for the following reasons: 1. Device activation has to happen faster, stacking them along with the other workqueue might lead to unnecessary delay in the activation of the path. 2. The effect could be felt the other way too. i.e the current events that are handled by the existing workqueue might get a delayed response. Signed-off-by: Chandra Seetharaman Acked-by: Alasdair G Kergon Signed-off-by: James Bottomley --- drivers/md/dm-mpath.c | 41 ++++++++++++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 7 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index e54ff372d71..9b16788118d 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -63,6 +63,7 @@ struct multipath { spinlock_t lock; const char *hw_handler_name; + struct work_struct activate_path; unsigned nr_priority_groups; struct list_head priority_groups; unsigned pg_init_required; /* pg_init needs calling? */ @@ -107,10 +108,10 @@ typedef int (*action_fn) (struct pgpath *pgpath); static struct kmem_cache *_mpio_cache; -static struct workqueue_struct *kmultipathd; +static struct workqueue_struct *kmultipathd, *kmpath_handlerd; static void process_queued_ios(struct work_struct *work); static void trigger_event(struct work_struct *work); -static void pg_init_done(struct dm_path *, int); +static void activate_path(struct work_struct *work); /*----------------------------------------------- @@ -180,6 +181,7 @@ static struct multipath *alloc_multipath(struct dm_target *ti) m->queue_io = 1; INIT_WORK(&m->process_queued_ios, process_queued_ios); INIT_WORK(&m->trigger_event, trigger_event); + INIT_WORK(&m->activate_path, activate_path); m->mpio_pool = mempool_create_slab_pool(MIN_IOS, _mpio_cache); if (!m->mpio_pool) { kfree(m); @@ -432,11 +434,8 @@ static void process_queued_ios(struct work_struct *work) out: spin_unlock_irqrestore(&m->lock, flags); - if (init_required) { - struct dm_path *path = &pgpath->path; - int ret = scsi_dh_activate(bdev_get_queue(path->dev->bdev)); - pg_init_done(path, ret); - } + if (init_required) + queue_work(kmpath_handlerd, &m->activate_path); if (!must_queue) dispatch_queued_ios(m); @@ -791,6 +790,7 @@ static void multipath_dtr(struct dm_target *ti) { struct multipath *m = (struct multipath *) ti->private; + flush_workqueue(kmpath_handlerd); flush_workqueue(kmultipathd); free_multipath(m); } @@ -1108,6 +1108,17 @@ static void pg_init_done(struct dm_path *path, int errors) spin_unlock_irqrestore(&m->lock, flags); } +static void activate_path(struct work_struct *work) +{ + int ret; + struct multipath *m = + container_of(work, struct multipath, activate_path); + struct dm_path *path = &m->current_pgpath->path; + + ret = scsi_dh_activate(bdev_get_queue(path->dev->bdev)); + pg_init_done(path, ret); +} + /* * end_io handling */ @@ -1451,6 +1462,21 @@ static int __init dm_multipath_init(void) return -ENOMEM; } + /* + * A separate workqueue is used to handle the device handlers + * to avoid overloading existing workqueue. Overloading the + * old workqueue would also create a bottleneck in the + * path of the storage hardware device activation. + */ + kmpath_handlerd = create_singlethread_workqueue("kmpath_handlerd"); + if (!kmpath_handlerd) { + DMERR("failed to create workqueue kmpath_handlerd"); + destroy_workqueue(kmultipathd); + dm_unregister_target(&multipath_target); + kmem_cache_destroy(_mpio_cache); + return -ENOMEM; + } + DMINFO("version %u.%u.%u loaded", multipath_target.version[0], multipath_target.version[1], multipath_target.version[2]); @@ -1462,6 +1488,7 @@ static void __exit dm_multipath_exit(void) { int r; + destroy_workqueue(kmpath_handlerd); destroy_workqueue(kmultipathd); r = dm_unregister_target(&multipath_target); -- cgit v1.2.3-18-g5258 From 2651f5d7d3bc5120a439e498f131e4d731f99b3e Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 1 May 2008 14:50:28 -0700 Subject: [SCSI] scsi_dh: Remove dm_pg_init_complete This patch just removes the dm layer's path initialization completion routine. This is separated from the other patch(scsi_dh: Use SCSI device handler in dm-multipath) Just to make that patch more readable. Signed-off-by: Chandra Seetharaman Acked-by: Alasdair G Kergon Signed-off-by: James Bottomley --- drivers/md/dm-mpath.c | 41 ----------------------------------------- 1 file changed, 41 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 9b16788118d..e8f704aa46f 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -7,7 +7,6 @@ #include "dm.h" #include "dm-path-selector.h" -#include "dm-hw-handler.h" #include "dm-bio-list.h" #include "dm-bio-record.h" #include "dm-uevent.h" @@ -1008,44 +1007,6 @@ static int pg_init_limit_reached(struct multipath *m, struct pgpath *pgpath) return limit_reached; } -/* - * pg_init must call this when it has completed its initialisation - */ -void dm_pg_init_complete(struct dm_path *path, unsigned err_flags) -{ - struct pgpath *pgpath = path_to_pgpath(path); - struct priority_group *pg = pgpath->pg; - struct multipath *m = pg->m; - unsigned long flags; - - /* - * If requested, retry pg_init until maximum number of retries exceeded. - * If retry not requested and PG already bypassed, always fail the path. - */ - if (err_flags & MP_RETRY) { - if (pg_init_limit_reached(m, pgpath)) - err_flags |= MP_FAIL_PATH; - } else if (err_flags && pg->bypassed) - err_flags |= MP_FAIL_PATH; - - if (err_flags & MP_FAIL_PATH) - fail_path(pgpath); - - if (err_flags & MP_BYPASS_PG) - bypass_pg(m, pg, 1); - - spin_lock_irqsave(&m->lock, flags); - if (err_flags & ~MP_RETRY) { - m->current_pgpath = NULL; - m->current_pg = NULL; - } else if (!m->pg_init_required) - m->queue_io = 0; - - m->pg_init_in_progress = 0; - queue_work(kmultipathd, &m->process_queued_ios); - spin_unlock_irqrestore(&m->lock, flags); -} - static void pg_init_done(struct dm_path *path, int errors) { struct pgpath *pgpath = path_to_pgpath(path); @@ -1497,8 +1458,6 @@ static void __exit dm_multipath_exit(void) kmem_cache_destroy(_mpio_cache); } -EXPORT_SYMBOL_GPL(dm_pg_init_complete); - module_init(dm_multipath_init); module_exit(dm_multipath_exit); -- cgit v1.2.3-18-g5258 From cb520223d7f22c5386aff27a5856a66e2c32aaac Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 1 May 2008 14:50:34 -0700 Subject: [SCSI] scsi_dh: Remove hardware handlers from dm This patch removes the 3 hardware handlers that currently exist under dm as the functionality is moved to SCSI layer in the earlier patches. [jejb: removed more makefile hunks and rejection fixes] Signed-off-by: Chandra Seetharaman Acked-by: Alasdair G Kergon Signed-off-by: James Bottomley --- drivers/md/Kconfig | 18 -- drivers/md/Makefile | 5 - drivers/md/dm-emc.c | 345 ---------------------- drivers/md/dm-mpath-hp-sw.c | 247 ---------------- drivers/md/dm-mpath-rdac.c | 700 -------------------------------------------- 5 files changed, 1315 deletions(-) delete mode 100644 drivers/md/dm-emc.c delete mode 100644 drivers/md/dm-mpath-hp-sw.c delete mode 100644 drivers/md/dm-mpath-rdac.c (limited to 'drivers/md') diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 5303af55d2c..b4a3c7d1451 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -256,24 +256,6 @@ config DM_MULTIPATH ---help--- Allow volume managers to support multipath hardware. -config DM_MULTIPATH_EMC - tristate "EMC CX/AX multipath support" - depends on DM_MULTIPATH && BLK_DEV_DM - ---help--- - Multipath support for EMC CX/AX series hardware. - -config DM_MULTIPATH_RDAC - tristate "LSI/Engenio RDAC multipath support (EXPERIMENTAL)" - depends on DM_MULTIPATH && BLK_DEV_DM && SCSI && EXPERIMENTAL - ---help--- - Multipath support for LSI/Engenio RDAC. - -config DM_MULTIPATH_HP - tristate "HP MSA multipath support (EXPERIMENTAL)" - depends on DM_MULTIPATH && BLK_DEV_DM && SCSI && EXPERIMENTAL - ---help--- - Multipath support for HP MSA (Active/Passive) series hardware. - config DM_DELAY tristate "I/O delaying target (EXPERIMENTAL)" depends on BLK_DEV_DM && EXPERIMENTAL diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 7be09eeea29..62e141e86d6 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -7,8 +7,6 @@ dm-mod-objs := dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \ dm-multipath-objs := dm-hw-handler.o dm-path-selector.o dm-mpath.o dm-snapshot-objs := dm-snap.o dm-exception-store.o dm-mirror-objs := dm-raid1.o -dm-rdac-objs := dm-mpath-rdac.o -dm-hp-sw-objs := dm-mpath-hp-sw.o md-mod-objs := md.o bitmap.o raid456-objs := raid5.o raid6algos.o raid6recov.o raid6tables.o \ raid6int1.o raid6int2.o raid6int4.o \ @@ -35,9 +33,6 @@ obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o obj-$(CONFIG_DM_CRYPT) += dm-crypt.o obj-$(CONFIG_DM_DELAY) += dm-delay.o obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o -obj-$(CONFIG_DM_MULTIPATH_EMC) += dm-emc.o -obj-$(CONFIG_DM_MULTIPATH_HP) += dm-hp-sw.o -obj-$(CONFIG_DM_MULTIPATH_RDAC) += dm-rdac.o obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o obj-$(CONFIG_DM_ZERO) += dm-zero.o diff --git a/drivers/md/dm-emc.c b/drivers/md/dm-emc.c deleted file mode 100644 index 3ea5ad4b780..00000000000 --- a/drivers/md/dm-emc.c +++ /dev/null @@ -1,345 +0,0 @@ -/* - * Copyright (C) 2004 SUSE LINUX Products GmbH. All rights reserved. - * Copyright (C) 2004 Red Hat, Inc. All rights reserved. - * - * This file is released under the GPL. - * - * Multipath support for EMC CLARiiON AX/CX-series hardware. - */ - -#include "dm.h" -#include "dm-hw-handler.h" -#include -#include - -#define DM_MSG_PREFIX "multipath emc" - -struct emc_handler { - spinlock_t lock; - - /* Whether we should send the short trespass command (FC-series) - * or the long version (default for AX/CX CLARiiON arrays). */ - unsigned short_trespass; - /* Whether or not to honor SCSI reservations when initiating a - * switch-over. Default: Don't. */ - unsigned hr; - - unsigned char sense[SCSI_SENSE_BUFFERSIZE]; -}; - -#define TRESPASS_PAGE 0x22 -#define EMC_FAILOVER_TIMEOUT (60 * HZ) - -/* Code borrowed from dm-lsi-rdac by Mike Christie */ - -static inline void free_bio(struct bio *bio) -{ - __free_page(bio->bi_io_vec[0].bv_page); - bio_put(bio); -} - -static void emc_endio(struct bio *bio, int error) -{ - struct dm_path *path = bio->bi_private; - - /* We also need to look at the sense keys here whether or not to - * switch to the next PG etc. - * - * For now simple logic: either it works or it doesn't. - */ - if (error) - dm_pg_init_complete(path, MP_FAIL_PATH); - else - dm_pg_init_complete(path, 0); - - /* request is freed in block layer */ - free_bio(bio); -} - -static struct bio *get_failover_bio(struct dm_path *path, unsigned data_size) -{ - struct bio *bio; - struct page *page; - - bio = bio_alloc(GFP_ATOMIC, 1); - if (!bio) { - DMERR("get_failover_bio: bio_alloc() failed."); - return NULL; - } - - bio->bi_rw |= (1 << BIO_RW); - bio->bi_bdev = path->dev->bdev; - bio->bi_sector = 0; - bio->bi_private = path; - bio->bi_end_io = emc_endio; - - page = alloc_page(GFP_ATOMIC); - if (!page) { - DMERR("get_failover_bio: alloc_page() failed."); - bio_put(bio); - return NULL; - } - - if (bio_add_page(bio, page, data_size, 0) != data_size) { - DMERR("get_failover_bio: bio_add_page() failed."); - __free_page(page); - bio_put(bio); - return NULL; - } - - return bio; -} - -static struct request *get_failover_req(struct emc_handler *h, - struct bio *bio, struct dm_path *path) -{ - struct request *rq; - struct block_device *bdev = bio->bi_bdev; - struct request_queue *q = bdev_get_queue(bdev); - - /* FIXME: Figure out why it fails with GFP_ATOMIC. */ - rq = blk_get_request(q, WRITE, __GFP_WAIT); - if (!rq) { - DMERR("get_failover_req: blk_get_request failed"); - return NULL; - } - - blk_rq_append_bio(q, rq, bio); - - rq->sense = h->sense; - memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); - rq->sense_len = 0; - - rq->timeout = EMC_FAILOVER_TIMEOUT; - rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; - - return rq; -} - -static struct request *emc_trespass_get(struct emc_handler *h, - struct dm_path *path) -{ - struct bio *bio; - struct request *rq; - unsigned char *page22; - unsigned char long_trespass_pg[] = { - 0, 0, 0, 0, - TRESPASS_PAGE, /* Page code */ - 0x09, /* Page length - 2 */ - h->hr ? 0x01 : 0x81, /* Trespass code + Honor reservation bit */ - 0xff, 0xff, /* Trespass target */ - 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */ - }; - unsigned char short_trespass_pg[] = { - 0, 0, 0, 0, - TRESPASS_PAGE, /* Page code */ - 0x02, /* Page length - 2 */ - h->hr ? 0x01 : 0x81, /* Trespass code + Honor reservation bit */ - 0xff, /* Trespass target */ - }; - unsigned data_size = h->short_trespass ? sizeof(short_trespass_pg) : - sizeof(long_trespass_pg); - - /* get bio backing */ - if (data_size > PAGE_SIZE) - /* this should never happen */ - return NULL; - - bio = get_failover_bio(path, data_size); - if (!bio) { - DMERR("emc_trespass_get: no bio"); - return NULL; - } - - page22 = (unsigned char *)bio_data(bio); - memset(page22, 0, data_size); - - memcpy(page22, h->short_trespass ? - short_trespass_pg : long_trespass_pg, data_size); - - /* get request for block layer packet command */ - rq = get_failover_req(h, bio, path); - if (!rq) { - DMERR("emc_trespass_get: no rq"); - free_bio(bio); - return NULL; - } - - /* Prepare the command. */ - rq->cmd[0] = MODE_SELECT; - rq->cmd[1] = 0x10; - rq->cmd[4] = data_size; - rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); - - return rq; -} - -static void emc_pg_init(struct hw_handler *hwh, unsigned bypassed, - struct dm_path *path) -{ - struct request *rq; - struct request_queue *q = bdev_get_queue(path->dev->bdev); - - /* - * We can either blindly init the pg (then look at the sense), - * or we can send some commands to get the state here (then - * possibly send the fo cmnd), or we can also have the - * initial state passed into us and then get an update here. - */ - if (!q) { - DMINFO("emc_pg_init: no queue"); - goto fail_path; - } - - /* FIXME: The request should be pre-allocated. */ - rq = emc_trespass_get(hwh->context, path); - if (!rq) { - DMERR("emc_pg_init: no rq"); - goto fail_path; - } - - DMINFO("emc_pg_init: sending switch-over command"); - elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1); - return; - -fail_path: - dm_pg_init_complete(path, MP_FAIL_PATH); -} - -static struct emc_handler *alloc_emc_handler(void) -{ - struct emc_handler *h = kzalloc(sizeof(*h), GFP_KERNEL); - - if (h) - spin_lock_init(&h->lock); - - return h; -} - -static int emc_create(struct hw_handler *hwh, unsigned argc, char **argv) -{ - struct emc_handler *h; - unsigned hr, short_trespass; - - if (argc == 0) { - /* No arguments: use defaults */ - hr = 0; - short_trespass = 0; - } else if (argc != 2) { - DMWARN("incorrect number of arguments"); - return -EINVAL; - } else { - if ((sscanf(argv[0], "%u", &short_trespass) != 1) - || (short_trespass > 1)) { - DMWARN("invalid trespass mode selected"); - return -EINVAL; - } - - if ((sscanf(argv[1], "%u", &hr) != 1) - || (hr > 1)) { - DMWARN("invalid honor reservation flag selected"); - return -EINVAL; - } - } - - h = alloc_emc_handler(); - if (!h) - return -ENOMEM; - - hwh->context = h; - - if ((h->short_trespass = short_trespass)) - DMWARN("short trespass command will be send"); - else - DMWARN("long trespass command will be send"); - - if ((h->hr = hr)) - DMWARN("honor reservation bit will be set"); - else - DMWARN("honor reservation bit will not be set (default)"); - - return 0; -} - -static void emc_destroy(struct hw_handler *hwh) -{ - struct emc_handler *h = (struct emc_handler *) hwh->context; - - kfree(h); - hwh->context = NULL; -} - -static unsigned emc_error(struct hw_handler *hwh, struct bio *bio) -{ - /* FIXME: Patch from axboe still missing */ -#if 0 - int sense; - - if (bio->bi_error & BIO_SENSE) { - sense = bio->bi_error & 0xffffff; /* sense key / asc / ascq */ - - if (sense == 0x020403) { - /* LUN Not Ready - Manual Intervention Required - * indicates this is a passive path. - * - * FIXME: However, if this is seen and EVPD C0 - * indicates that this is due to a NDU in - * progress, we should set FAIL_PATH too. - * This indicates we might have to do a SCSI - * inquiry in the end_io path. Ugh. */ - return MP_BYPASS_PG | MP_RETRY_IO; - } else if (sense == 0x052501) { - /* An array based copy is in progress. Do not - * fail the path, do not bypass to another PG, - * do not retry. Fail the IO immediately. - * (Actually this is the same conclusion as in - * the default handler, but lets make sure.) */ - return 0; - } else if (sense == 0x062900) { - /* Unit Attention Code. This is the first IO - * to the new path, so just retry. */ - return MP_RETRY_IO; - } - } -#endif - - /* Try default handler */ - return dm_scsi_err_handler(hwh, bio); -} - -static struct hw_handler_type emc_hwh = { - .name = "emc", - .module = THIS_MODULE, - .create = emc_create, - .destroy = emc_destroy, - .pg_init = emc_pg_init, - .error = emc_error, -}; - -static int __init dm_emc_init(void) -{ - int r = dm_register_hw_handler(&emc_hwh); - - if (r < 0) - DMERR("register failed %d", r); - - DMINFO("version 0.0.3 loaded"); - - return r; -} - -static void __exit dm_emc_exit(void) -{ - int r = dm_unregister_hw_handler(&emc_hwh); - - if (r < 0) - DMERR("unregister failed %d", r); -} - -module_init(dm_emc_init); -module_exit(dm_emc_exit); - -MODULE_DESCRIPTION(DM_NAME " EMC CX/AX/FC-family multipath"); -MODULE_AUTHOR("Lars Marowsky-Bree "); -MODULE_LICENSE("GPL"); diff --git a/drivers/md/dm-mpath-hp-sw.c b/drivers/md/dm-mpath-hp-sw.c deleted file mode 100644 index b63a0ab37c5..00000000000 --- a/drivers/md/dm-mpath-hp-sw.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Copyright (C) 2005 Mike Christie, All rights reserved. - * Copyright (C) 2007 Red Hat, Inc. All rights reserved. - * Authors: Mike Christie - * Dave Wysochanski - * - * This file is released under the GPL. - * - * This module implements the specific path activation code for - * HP StorageWorks and FSC FibreCat Asymmetric (Active/Passive) - * storage arrays. - * These storage arrays have controller-based failover, not - * LUN-based failover. However, LUN-based failover is the design - * of dm-multipath. Thus, this module is written for LUN-based failover. - */ -#include -#include -#include -#include -#include -#include - -#include "dm.h" -#include "dm-hw-handler.h" - -#define DM_MSG_PREFIX "multipath hp-sw" -#define DM_HP_HWH_NAME "hp-sw" -#define DM_HP_HWH_VER "1.0.0" - -struct hp_sw_context { - unsigned char sense[SCSI_SENSE_BUFFERSIZE]; -}; - -/* - * hp_sw_error_is_retryable - Is an HP-specific check condition retryable? - * @req: path activation request - * - * Examine error codes of request and determine whether the error is retryable. - * Some error codes are already retried by scsi-ml (see - * scsi_decide_disposition), but some HP specific codes are not. - * The intent of this routine is to supply the logic for the HP specific - * check conditions. - * - * Returns: - * 1 - command completed with retryable error - * 0 - command completed with non-retryable error - * - * Possible optimizations - * 1. More hardware-specific error codes - */ -static int hp_sw_error_is_retryable(struct request *req) -{ - /* - * NOT_READY is known to be retryable - * For now we just dump out the sense data and call it retryable - */ - if (status_byte(req->errors) == CHECK_CONDITION) - __scsi_print_sense(DM_HP_HWH_NAME, req->sense, req->sense_len); - - /* - * At this point we don't have complete information about all the error - * codes from this hardware, so we are just conservative and retry - * when in doubt. - */ - return 1; -} - -/* - * hp_sw_end_io - Completion handler for HP path activation. - * @req: path activation request - * @error: scsi-ml error - * - * Check sense data, free request structure, and notify dm that - * pg initialization has completed. - * - * Context: scsi-ml softirq - * - */ -static void hp_sw_end_io(struct request *req, int error) -{ - struct dm_path *path = req->end_io_data; - unsigned err_flags = 0; - - if (!error) { - DMDEBUG("%s path activation command - success", - path->dev->name); - goto out; - } - - if (hp_sw_error_is_retryable(req)) { - DMDEBUG("%s path activation command - retry", - path->dev->name); - err_flags = MP_RETRY; - goto out; - } - - DMWARN("%s path activation fail - error=0x%x", - path->dev->name, error); - err_flags = MP_FAIL_PATH; - -out: - req->end_io_data = NULL; - __blk_put_request(req->q, req); - dm_pg_init_complete(path, err_flags); -} - -/* - * hp_sw_get_request - Allocate an HP specific path activation request - * @path: path on which request will be sent (needed for request queue) - * - * The START command is used for path activation request. - * These arrays are controller-based failover, not LUN based. - * One START command issued to a single path will fail over all - * LUNs for the same controller. - * - * Possible optimizations - * 1. Make timeout configurable - * 2. Preallocate request - */ -static struct request *hp_sw_get_request(struct dm_path *path) -{ - struct request *req; - struct block_device *bdev = path->dev->bdev; - struct request_queue *q = bdev_get_queue(bdev); - struct hp_sw_context *h = path->hwhcontext; - - req = blk_get_request(q, WRITE, GFP_NOIO); - if (!req) - goto out; - - req->timeout = 60 * HZ; - - req->errors = 0; - req->cmd_type = REQ_TYPE_BLOCK_PC; - req->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; - req->end_io_data = path; - req->sense = h->sense; - memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE); - - req->cmd[0] = START_STOP; - req->cmd[4] = 1; - req->cmd_len = COMMAND_SIZE(req->cmd[0]); - -out: - return req; -} - -/* - * hp_sw_pg_init - HP path activation implementation. - * @hwh: hardware handler specific data - * @bypassed: unused; is the path group bypassed? (see dm-mpath.c) - * @path: path to send initialization command - * - * Send an HP-specific path activation command on 'path'. - * Do not try to optimize in any way, just send the activation command. - * More than one path activation command may be sent to the same controller. - * This seems to work fine for basic failover support. - * - * Possible optimizations - * 1. Detect an in-progress activation request and avoid submitting another one - * 2. Model the controller and only send a single activation request at a time - * 3. Determine the state of a path before sending an activation request - * - * Context: kmpathd (see process_queued_ios() in dm-mpath.c) - */ -static void hp_sw_pg_init(struct hw_handler *hwh, unsigned bypassed, - struct dm_path *path) -{ - struct request *req; - struct hp_sw_context *h; - - path->hwhcontext = hwh->context; - h = hwh->context; - - req = hp_sw_get_request(path); - if (!req) { - DMERR("%s path activation command - allocation fail", - path->dev->name); - goto retry; - } - - DMDEBUG("%s path activation command - sent", path->dev->name); - - blk_execute_rq_nowait(req->q, NULL, req, 1, hp_sw_end_io); - return; - -retry: - dm_pg_init_complete(path, MP_RETRY); -} - -static int hp_sw_create(struct hw_handler *hwh, unsigned argc, char **argv) -{ - struct hp_sw_context *h; - - h = kmalloc(sizeof(*h), GFP_KERNEL); - if (!h) - return -ENOMEM; - - hwh->context = h; - - return 0; -} - -static void hp_sw_destroy(struct hw_handler *hwh) -{ - struct hp_sw_context *h = hwh->context; - - kfree(h); -} - -static struct hw_handler_type hp_sw_hwh = { - .name = DM_HP_HWH_NAME, - .module = THIS_MODULE, - .create = hp_sw_create, - .destroy = hp_sw_destroy, - .pg_init = hp_sw_pg_init, -}; - -static int __init hp_sw_init(void) -{ - int r; - - r = dm_register_hw_handler(&hp_sw_hwh); - if (r < 0) - DMERR("register failed %d", r); - else - DMINFO("version " DM_HP_HWH_VER " loaded"); - - return r; -} - -static void __exit hp_sw_exit(void) -{ - int r; - - r = dm_unregister_hw_handler(&hp_sw_hwh); - if (r < 0) - DMERR("unregister failed %d", r); -} - -module_init(hp_sw_init); -module_exit(hp_sw_exit); - -MODULE_DESCRIPTION("DM Multipath HP StorageWorks / FSC FibreCat (A/P) support"); -MODULE_AUTHOR("Mike Christie, Dave Wysochanski "); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DM_HP_HWH_VER); diff --git a/drivers/md/dm-mpath-rdac.c b/drivers/md/dm-mpath-rdac.c deleted file mode 100644 index 95e77734880..00000000000 --- a/drivers/md/dm-mpath-rdac.c +++ /dev/null @@ -1,700 +0,0 @@ -/* - * Engenio/LSI RDAC DM HW handler - * - * Copyright (C) 2005 Mike Christie. All rights reserved. - * Copyright (C) Chandra Seetharaman, IBM Corp. 2007 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ -#include -#include -#include - -#define DM_MSG_PREFIX "multipath rdac" - -#include "dm.h" -#include "dm-hw-handler.h" - -#define RDAC_DM_HWH_NAME "rdac" -#define RDAC_DM_HWH_VER "0.4" - -/* - * LSI mode page stuff - * - * These struct definitions and the forming of the - * mode page were taken from the LSI RDAC 2.4 GPL'd - * driver, and then converted to Linux conventions. - */ -#define RDAC_QUIESCENCE_TIME 20; -/* - * Page Codes - */ -#define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c - -/* - * Controller modes definitions - */ -#define RDAC_MODE_TRANSFER_ALL_LUNS 0x01 -#define RDAC_MODE_TRANSFER_SPECIFIED_LUNS 0x02 - -/* - * RDAC Options field - */ -#define RDAC_FORCED_QUIESENCE 0x02 - -#define RDAC_FAILOVER_TIMEOUT (60 * HZ) - -struct rdac_mode_6_hdr { - u8 data_len; - u8 medium_type; - u8 device_params; - u8 block_desc_len; -}; - -struct rdac_mode_10_hdr { - u16 data_len; - u8 medium_type; - u8 device_params; - u16 reserved; - u16 block_desc_len; -}; - -struct rdac_mode_common { - u8 controller_serial[16]; - u8 alt_controller_serial[16]; - u8 rdac_mode[2]; - u8 alt_rdac_mode[2]; - u8 quiescence_timeout; - u8 rdac_options; -}; - -struct rdac_pg_legacy { - struct rdac_mode_6_hdr hdr; - u8 page_code; - u8 page_len; - struct rdac_mode_common common; -#define MODE6_MAX_LUN 32 - u8 lun_table[MODE6_MAX_LUN]; - u8 reserved2[32]; - u8 reserved3; - u8 reserved4; -}; - -struct rdac_pg_expanded { - struct rdac_mode_10_hdr hdr; - u8 page_code; - u8 subpage_code; - u8 page_len[2]; - struct rdac_mode_common common; - u8 lun_table[256]; - u8 reserved3; - u8 reserved4; -}; - -struct c9_inquiry { - u8 peripheral_info; - u8 page_code; /* 0xC9 */ - u8 reserved1; - u8 page_len; - u8 page_id[4]; /* "vace" */ - u8 avte_cvp; - u8 path_prio; - u8 reserved2[38]; -}; - -#define SUBSYS_ID_LEN 16 -#define SLOT_ID_LEN 2 - -struct c4_inquiry { - u8 peripheral_info; - u8 page_code; /* 0xC4 */ - u8 reserved1; - u8 page_len; - u8 page_id[4]; /* "subs" */ - u8 subsys_id[SUBSYS_ID_LEN]; - u8 revision[4]; - u8 slot_id[SLOT_ID_LEN]; - u8 reserved[2]; -}; - -struct rdac_controller { - u8 subsys_id[SUBSYS_ID_LEN]; - u8 slot_id[SLOT_ID_LEN]; - int use_10_ms; - struct kref kref; - struct list_head node; /* list of all controllers */ - spinlock_t lock; - int submitted; - struct list_head cmd_list; /* list of commands to be submitted */ - union { - struct rdac_pg_legacy legacy; - struct rdac_pg_expanded expanded; - } mode_select; -}; -struct c8_inquiry { - u8 peripheral_info; - u8 page_code; /* 0xC8 */ - u8 reserved1; - u8 page_len; - u8 page_id[4]; /* "edid" */ - u8 reserved2[3]; - u8 vol_uniq_id_len; - u8 vol_uniq_id[16]; - u8 vol_user_label_len; - u8 vol_user_label[60]; - u8 array_uniq_id_len; - u8 array_unique_id[16]; - u8 array_user_label_len; - u8 array_user_label[60]; - u8 lun[8]; -}; - -struct c2_inquiry { - u8 peripheral_info; - u8 page_code; /* 0xC2 */ - u8 reserved1; - u8 page_len; - u8 page_id[4]; /* "swr4" */ - u8 sw_version[3]; - u8 sw_date[3]; - u8 features_enabled; - u8 max_lun_supported; - u8 partitions[239]; /* Total allocation length should be 0xFF */ -}; - -struct rdac_handler { - struct list_head entry; /* list waiting to submit MODE SELECT */ - unsigned timeout; - struct rdac_controller *ctlr; -#define UNINITIALIZED_LUN (1 << 8) - unsigned lun; - unsigned char sense[SCSI_SENSE_BUFFERSIZE]; - struct dm_path *path; - struct work_struct work; -#define SEND_C2_INQUIRY 1 -#define SEND_C4_INQUIRY 2 -#define SEND_C8_INQUIRY 3 -#define SEND_C9_INQUIRY 4 -#define SEND_MODE_SELECT 5 - int cmd_to_send; - union { - struct c2_inquiry c2; - struct c4_inquiry c4; - struct c8_inquiry c8; - struct c9_inquiry c9; - } inq; -}; - -static LIST_HEAD(ctlr_list); -static DEFINE_SPINLOCK(list_lock); -static struct workqueue_struct *rdac_wkqd; - -static inline int had_failures(struct request *req, int error) -{ - return (error || host_byte(req->errors) != DID_OK || - msg_byte(req->errors) != COMMAND_COMPLETE); -} - -static void rdac_resubmit_all(struct rdac_handler *h) -{ - struct rdac_controller *ctlr = h->ctlr; - struct rdac_handler *tmp, *h1; - - spin_lock(&ctlr->lock); - list_for_each_entry_safe(h1, tmp, &ctlr->cmd_list, entry) { - h1->cmd_to_send = SEND_C9_INQUIRY; - queue_work(rdac_wkqd, &h1->work); - list_del(&h1->entry); - } - ctlr->submitted = 0; - spin_unlock(&ctlr->lock); -} - -static void mode_select_endio(struct request *req, int error) -{ - struct rdac_handler *h = req->end_io_data; - struct scsi_sense_hdr sense_hdr; - int sense = 0, fail = 0; - - if (had_failures(req, error)) { - fail = 1; - goto failed; - } - - if (status_byte(req->errors) == CHECK_CONDITION) { - scsi_normalize_sense(req->sense, SCSI_SENSE_BUFFERSIZE, - &sense_hdr); - sense = (sense_hdr.sense_key << 16) | (sense_hdr.asc << 8) | - sense_hdr.ascq; - /* If it is retryable failure, submit the c9 inquiry again */ - if (sense == 0x59136 || sense == 0x68b02 || sense == 0xb8b02 || - sense == 0x62900) { - /* 0x59136 - Command lock contention - * 0x[6b]8b02 - Quiesense in progress or achieved - * 0x62900 - Power On, Reset, or Bus Device Reset - */ - h->cmd_to_send = SEND_C9_INQUIRY; - queue_work(rdac_wkqd, &h->work); - goto done; - } - if (sense) - DMINFO("MODE_SELECT failed on %s with sense 0x%x", - h->path->dev->name, sense); - } -failed: - if (fail || sense) - dm_pg_init_complete(h->path, MP_FAIL_PATH); - else - dm_pg_init_complete(h->path, 0); - -done: - rdac_resubmit_all(h); - __blk_put_request(req->q, req); -} - -static struct request *get_rdac_req(struct rdac_handler *h, - void *buffer, unsigned buflen, int rw) -{ - struct request *rq; - struct request_queue *q = bdev_get_queue(h->path->dev->bdev); - - rq = blk_get_request(q, rw, GFP_KERNEL); - - if (!rq) { - DMINFO("get_rdac_req: blk_get_request failed"); - return NULL; - } - - if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_KERNEL)) { - blk_put_request(rq); - DMINFO("get_rdac_req: blk_rq_map_kern failed"); - return NULL; - } - - rq->sense = h->sense; - memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); - rq->sense_len = 0; - - rq->end_io_data = h; - rq->timeout = h->timeout; - rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; - return rq; -} - -static struct request *rdac_failover_get(struct rdac_handler *h) -{ - struct request *rq; - struct rdac_mode_common *common; - unsigned data_size; - - if (h->ctlr->use_10_ms) { - struct rdac_pg_expanded *rdac_pg; - - data_size = sizeof(struct rdac_pg_expanded); - rdac_pg = &h->ctlr->mode_select.expanded; - memset(rdac_pg, 0, data_size); - common = &rdac_pg->common; - rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40; - rdac_pg->subpage_code = 0x1; - rdac_pg->page_len[0] = 0x01; - rdac_pg->page_len[1] = 0x28; - rdac_pg->lun_table[h->lun] = 0x81; - } else { - struct rdac_pg_legacy *rdac_pg; - - data_size = sizeof(struct rdac_pg_legacy); - rdac_pg = &h->ctlr->mode_select.legacy; - memset(rdac_pg, 0, data_size); - common = &rdac_pg->common; - rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER; - rdac_pg->page_len = 0x68; - rdac_pg->lun_table[h->lun] = 0x81; - } - common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS; - common->quiescence_timeout = RDAC_QUIESCENCE_TIME; - common->rdac_options = RDAC_FORCED_QUIESENCE; - - /* get request for block layer packet command */ - rq = get_rdac_req(h, &h->ctlr->mode_select, data_size, WRITE); - if (!rq) { - DMERR("rdac_failover_get: no rq"); - return NULL; - } - - /* Prepare the command. */ - if (h->ctlr->use_10_ms) { - rq->cmd[0] = MODE_SELECT_10; - rq->cmd[7] = data_size >> 8; - rq->cmd[8] = data_size & 0xff; - } else { - rq->cmd[0] = MODE_SELECT; - rq->cmd[4] = data_size; - } - rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); - - return rq; -} - -/* Acquires h->ctlr->lock */ -static void submit_mode_select(struct rdac_handler *h) -{ - struct request *rq; - struct request_queue *q = bdev_get_queue(h->path->dev->bdev); - - spin_lock(&h->ctlr->lock); - if (h->ctlr->submitted) { - list_add(&h->entry, &h->ctlr->cmd_list); - goto drop_lock; - } - - if (!q) { - DMINFO("submit_mode_select: no queue"); - goto fail_path; - } - - rq = rdac_failover_get(h); - if (!rq) { - DMERR("submit_mode_select: no rq"); - goto fail_path; - } - - DMINFO("queueing MODE_SELECT command on %s", h->path->dev->name); - - blk_execute_rq_nowait(q, NULL, rq, 1, mode_select_endio); - h->ctlr->submitted = 1; - goto drop_lock; -fail_path: - dm_pg_init_complete(h->path, MP_FAIL_PATH); -drop_lock: - spin_unlock(&h->ctlr->lock); -} - -static void release_ctlr(struct kref *kref) -{ - struct rdac_controller *ctlr; - ctlr = container_of(kref, struct rdac_controller, kref); - - spin_lock(&list_lock); - list_del(&ctlr->node); - spin_unlock(&list_lock); - kfree(ctlr); -} - -static struct rdac_controller *get_controller(u8 *subsys_id, u8 *slot_id) -{ - struct rdac_controller *ctlr, *tmp; - - spin_lock(&list_lock); - - list_for_each_entry(tmp, &ctlr_list, node) { - if ((memcmp(tmp->subsys_id, subsys_id, SUBSYS_ID_LEN) == 0) && - (memcmp(tmp->slot_id, slot_id, SLOT_ID_LEN) == 0)) { - kref_get(&tmp->kref); - spin_unlock(&list_lock); - return tmp; - } - } - ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC); - if (!ctlr) - goto done; - - /* initialize fields of controller */ - memcpy(ctlr->subsys_id, subsys_id, SUBSYS_ID_LEN); - memcpy(ctlr->slot_id, slot_id, SLOT_ID_LEN); - kref_init(&ctlr->kref); - spin_lock_init(&ctlr->lock); - ctlr->submitted = 0; - ctlr->use_10_ms = -1; - INIT_LIST_HEAD(&ctlr->cmd_list); - list_add(&ctlr->node, &ctlr_list); -done: - spin_unlock(&list_lock); - return ctlr; -} - -static void c4_endio(struct request *req, int error) -{ - struct rdac_handler *h = req->end_io_data; - struct c4_inquiry *sp; - - if (had_failures(req, error)) { - dm_pg_init_complete(h->path, MP_FAIL_PATH); - goto done; - } - - sp = &h->inq.c4; - - h->ctlr = get_controller(sp->subsys_id, sp->slot_id); - - if (h->ctlr) { - h->cmd_to_send = SEND_C9_INQUIRY; - queue_work(rdac_wkqd, &h->work); - } else - dm_pg_init_complete(h->path, MP_FAIL_PATH); -done: - __blk_put_request(req->q, req); -} - -static void c2_endio(struct request *req, int error) -{ - struct rdac_handler *h = req->end_io_data; - struct c2_inquiry *sp; - - if (had_failures(req, error)) { - dm_pg_init_complete(h->path, MP_FAIL_PATH); - goto done; - } - - sp = &h->inq.c2; - - /* If more than MODE6_MAX_LUN luns are supported, use mode select 10 */ - if (sp->max_lun_supported >= MODE6_MAX_LUN) - h->ctlr->use_10_ms = 1; - else - h->ctlr->use_10_ms = 0; - - h->cmd_to_send = SEND_MODE_SELECT; - queue_work(rdac_wkqd, &h->work); -done: - __blk_put_request(req->q, req); -} - -static void c9_endio(struct request *req, int error) -{ - struct rdac_handler *h = req->end_io_data; - struct c9_inquiry *sp; - - if (had_failures(req, error)) { - dm_pg_init_complete(h->path, MP_FAIL_PATH); - goto done; - } - - /* We need to look at the sense keys here to take clear action. - * For now simple logic: If the host is in AVT mode or if controller - * owns the lun, return dm_pg_init_complete(), otherwise submit - * MODE SELECT. - */ - sp = &h->inq.c9; - - /* If in AVT mode, return success */ - if ((sp->avte_cvp >> 7) == 0x1) { - dm_pg_init_complete(h->path, 0); - goto done; - } - - /* If the controller on this path owns the LUN, return success */ - if (sp->avte_cvp & 0x1) { - dm_pg_init_complete(h->path, 0); - goto done; - } - - if (h->ctlr) { - if (h->ctlr->use_10_ms == -1) - h->cmd_to_send = SEND_C2_INQUIRY; - else - h->cmd_to_send = SEND_MODE_SELECT; - } else - h->cmd_to_send = SEND_C4_INQUIRY; - queue_work(rdac_wkqd, &h->work); -done: - __blk_put_request(req->q, req); -} - -static void c8_endio(struct request *req, int error) -{ - struct rdac_handler *h = req->end_io_data; - struct c8_inquiry *sp; - - if (had_failures(req, error)) { - dm_pg_init_complete(h->path, MP_FAIL_PATH); - goto done; - } - - /* We need to look at the sense keys here to take clear action. - * For now simple logic: Get the lun from the inquiry page. - */ - sp = &h->inq.c8; - h->lun = sp->lun[7]; /* currently it uses only one byte */ - h->cmd_to_send = SEND_C9_INQUIRY; - queue_work(rdac_wkqd, &h->work); -done: - __blk_put_request(req->q, req); -} - -static void submit_inquiry(struct rdac_handler *h, int page_code, - unsigned int len, rq_end_io_fn endio) -{ - struct request *rq; - struct request_queue *q = bdev_get_queue(h->path->dev->bdev); - - if (!q) - goto fail_path; - - rq = get_rdac_req(h, &h->inq, len, READ); - if (!rq) - goto fail_path; - - /* Prepare the command. */ - rq->cmd[0] = INQUIRY; - rq->cmd[1] = 1; - rq->cmd[2] = page_code; - rq->cmd[4] = len; - rq->cmd_len = COMMAND_SIZE(INQUIRY); - blk_execute_rq_nowait(q, NULL, rq, 1, endio); - return; - -fail_path: - dm_pg_init_complete(h->path, MP_FAIL_PATH); -} - -static void service_wkq(struct work_struct *work) -{ - struct rdac_handler *h = container_of(work, struct rdac_handler, work); - - switch (h->cmd_to_send) { - case SEND_C2_INQUIRY: - submit_inquiry(h, 0xC2, sizeof(struct c2_inquiry), c2_endio); - break; - case SEND_C4_INQUIRY: - submit_inquiry(h, 0xC4, sizeof(struct c4_inquiry), c4_endio); - break; - case SEND_C8_INQUIRY: - submit_inquiry(h, 0xC8, sizeof(struct c8_inquiry), c8_endio); - break; - case SEND_C9_INQUIRY: - submit_inquiry(h, 0xC9, sizeof(struct c9_inquiry), c9_endio); - break; - case SEND_MODE_SELECT: - submit_mode_select(h); - break; - default: - BUG(); - } -} -/* - * only support subpage2c until we confirm that this is just a matter of - * of updating firmware or not, and RDAC (basic AVT works already) for now - * but we can add these in in when we get time and testers - */ -static int rdac_create(struct hw_handler *hwh, unsigned argc, char **argv) -{ - struct rdac_handler *h; - unsigned timeout; - - if (argc == 0) { - /* No arguments: use defaults */ - timeout = RDAC_FAILOVER_TIMEOUT; - } else if (argc != 1) { - DMWARN("incorrect number of arguments"); - return -EINVAL; - } else { - if (sscanf(argv[1], "%u", &timeout) != 1) { - DMWARN("invalid timeout value"); - return -EINVAL; - } - } - - h = kzalloc(sizeof(*h), GFP_KERNEL); - if (!h) - return -ENOMEM; - - hwh->context = h; - h->timeout = timeout; - h->lun = UNINITIALIZED_LUN; - INIT_WORK(&h->work, service_wkq); - DMWARN("using RDAC command with timeout %u", h->timeout); - - return 0; -} - -static void rdac_destroy(struct hw_handler *hwh) -{ - struct rdac_handler *h = hwh->context; - - if (h->ctlr) - kref_put(&h->ctlr->kref, release_ctlr); - kfree(h); - hwh->context = NULL; -} - -static unsigned rdac_error(struct hw_handler *hwh, struct bio *bio) -{ - /* Try default handler */ - return dm_scsi_err_handler(hwh, bio); -} - -static void rdac_pg_init(struct hw_handler *hwh, unsigned bypassed, - struct dm_path *path) -{ - struct rdac_handler *h = hwh->context; - - h->path = path; - switch (h->lun) { - case UNINITIALIZED_LUN: - submit_inquiry(h, 0xC8, sizeof(struct c8_inquiry), c8_endio); - break; - default: - submit_inquiry(h, 0xC9, sizeof(struct c9_inquiry), c9_endio); - } -} - -static struct hw_handler_type rdac_handler = { - .name = RDAC_DM_HWH_NAME, - .module = THIS_MODULE, - .create = rdac_create, - .destroy = rdac_destroy, - .pg_init = rdac_pg_init, - .error = rdac_error, -}; - -static int __init rdac_init(void) -{ - int r; - - rdac_wkqd = create_singlethread_workqueue("rdac_wkqd"); - if (!rdac_wkqd) { - DMERR("Failed to create workqueue rdac_wkqd."); - return -ENOMEM; - } - - r = dm_register_hw_handler(&rdac_handler); - if (r < 0) { - DMERR("%s: register failed %d", RDAC_DM_HWH_NAME, r); - destroy_workqueue(rdac_wkqd); - return r; - } - - DMINFO("%s: version %s loaded", RDAC_DM_HWH_NAME, RDAC_DM_HWH_VER); - return 0; -} - -static void __exit rdac_exit(void) -{ - int r = dm_unregister_hw_handler(&rdac_handler); - - destroy_workqueue(rdac_wkqd); - if (r < 0) - DMERR("%s: unregister failed %d", RDAC_DM_HWH_NAME, r); -} - -module_init(rdac_init); -module_exit(rdac_exit); - -MODULE_DESCRIPTION("DM Multipath LSI/Engenio RDAC support"); -MODULE_AUTHOR("Mike Christie, Chandra Seetharaman"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(RDAC_DM_HWH_VER); -- cgit v1.2.3-18-g5258 From 688864e29869a71a8183e4e2f96ccf9f2de1375f Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 1 May 2008 14:50:40 -0700 Subject: [SCSI] scsi_dh: Remove hardware handler infrastructure from dm This patch just removes infrastructure that provided support for hardware handlers in the dm layer as it is not needed anymore. Signed-off-by: Chandra Seetharaman Acked-by: Alasdair G Kergon Signed-off-by: James Bottomley --- drivers/md/Makefile | 2 +- drivers/md/dm-hw-handler.c | 213 --------------------------------------------- drivers/md/dm-hw-handler.h | 63 -------------- drivers/md/dm-mpath.h | 1 - 4 files changed, 1 insertion(+), 278 deletions(-) delete mode 100644 drivers/md/dm-hw-handler.c delete mode 100644 drivers/md/dm-hw-handler.h (limited to 'drivers/md') diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 62e141e86d6..f1ef33dfd8c 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -4,7 +4,7 @@ dm-mod-objs := dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \ dm-ioctl.o dm-io.o dm-kcopyd.o -dm-multipath-objs := dm-hw-handler.o dm-path-selector.o dm-mpath.o +dm-multipath-objs := dm-path-selector.o dm-mpath.o dm-snapshot-objs := dm-snap.o dm-exception-store.o dm-mirror-objs := dm-raid1.o md-mod-objs := md.o bitmap.o diff --git a/drivers/md/dm-hw-handler.c b/drivers/md/dm-hw-handler.c deleted file mode 100644 index 2ee84d8aa0b..00000000000 --- a/drivers/md/dm-hw-handler.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Copyright (C) 2004 Red Hat, Inc. All rights reserved. - * - * This file is released under the GPL. - * - * Multipath hardware handler registration. - */ - -#include "dm.h" -#include "dm-hw-handler.h" - -#include - -struct hwh_internal { - struct hw_handler_type hwht; - - struct list_head list; - long use; -}; - -#define hwht_to_hwhi(__hwht) container_of((__hwht), struct hwh_internal, hwht) - -static LIST_HEAD(_hw_handlers); -static DECLARE_RWSEM(_hwh_lock); - -static struct hwh_internal *__find_hw_handler_type(const char *name) -{ - struct hwh_internal *hwhi; - - list_for_each_entry(hwhi, &_hw_handlers, list) { - if (!strcmp(name, hwhi->hwht.name)) - return hwhi; - } - - return NULL; -} - -static struct hwh_internal *get_hw_handler(const char *name) -{ - struct hwh_internal *hwhi; - - down_read(&_hwh_lock); - hwhi = __find_hw_handler_type(name); - if (hwhi) { - if ((hwhi->use == 0) && !try_module_get(hwhi->hwht.module)) - hwhi = NULL; - else - hwhi->use++; - } - up_read(&_hwh_lock); - - return hwhi; -} - -struct hw_handler_type *dm_get_hw_handler(const char *name) -{ - struct hwh_internal *hwhi; - - if (!name) - return NULL; - - hwhi = get_hw_handler(name); - if (!hwhi) { - request_module("dm-%s", name); - hwhi = get_hw_handler(name); - } - - return hwhi ? &hwhi->hwht : NULL; -} - -void dm_put_hw_handler(struct hw_handler_type *hwht) -{ - struct hwh_internal *hwhi; - - if (!hwht) - return; - - down_read(&_hwh_lock); - hwhi = __find_hw_handler_type(hwht->name); - if (!hwhi) - goto out; - - if (--hwhi->use == 0) - module_put(hwhi->hwht.module); - - BUG_ON(hwhi->use < 0); - - out: - up_read(&_hwh_lock); -} - -static struct hwh_internal *_alloc_hw_handler(struct hw_handler_type *hwht) -{ - struct hwh_internal *hwhi = kzalloc(sizeof(*hwhi), GFP_KERNEL); - - if (hwhi) - hwhi->hwht = *hwht; - - return hwhi; -} - -int dm_register_hw_handler(struct hw_handler_type *hwht) -{ - int r = 0; - struct hwh_internal *hwhi = _alloc_hw_handler(hwht); - - if (!hwhi) - return -ENOMEM; - - down_write(&_hwh_lock); - - if (__find_hw_handler_type(hwht->name)) { - kfree(hwhi); - r = -EEXIST; - } else - list_add(&hwhi->list, &_hw_handlers); - - up_write(&_hwh_lock); - - return r; -} - -int dm_unregister_hw_handler(struct hw_handler_type *hwht) -{ - struct hwh_internal *hwhi; - - down_write(&_hwh_lock); - - hwhi = __find_hw_handler_type(hwht->name); - if (!hwhi) { - up_write(&_hwh_lock); - return -EINVAL; - } - - if (hwhi->use) { - up_write(&_hwh_lock); - return -ETXTBSY; - } - - list_del(&hwhi->list); - - up_write(&_hwh_lock); - - kfree(hwhi); - - return 0; -} - -unsigned dm_scsi_err_handler(struct hw_handler *hwh, struct bio *bio) -{ -#if 0 - int sense_key, asc, ascq; - - if (bio->bi_error & BIO_SENSE) { - /* FIXME: This is just an initial guess. */ - /* key / asc / ascq */ - sense_key = (bio->bi_error >> 16) & 0xff; - asc = (bio->bi_error >> 8) & 0xff; - ascq = bio->bi_error & 0xff; - - switch (sense_key) { - /* This block as a whole comes from the device. - * So no point retrying on another path. */ - case 0x03: /* Medium error */ - case 0x05: /* Illegal request */ - case 0x07: /* Data protect */ - case 0x08: /* Blank check */ - case 0x0a: /* copy aborted */ - case 0x0c: /* obsolete - no clue ;-) */ - case 0x0d: /* volume overflow */ - case 0x0e: /* data miscompare */ - case 0x0f: /* reserved - no idea either. */ - return MP_ERROR_IO; - - /* For these errors it's unclear whether they - * come from the device or the controller. - * So just lets try a different path, and if - * it eventually succeeds, user-space will clear - * the paths again... */ - case 0x02: /* Not ready */ - case 0x04: /* Hardware error */ - case 0x09: /* vendor specific */ - case 0x0b: /* Aborted command */ - return MP_FAIL_PATH; - - case 0x06: /* Unit attention - might want to decode */ - if (asc == 0x04 && ascq == 0x01) - /* "Unit in the process of - * becoming ready" */ - return 0; - return MP_FAIL_PATH; - - /* FIXME: For Unit Not Ready we may want - * to have a generic pg activation - * feature (START_UNIT). */ - - /* Should these two ever end up in the - * error path? I don't think so. */ - case 0x00: /* No sense */ - case 0x01: /* Recovered error */ - return 0; - } - } -#endif - - /* We got no idea how to decode the other kinds of errors -> - * assume generic error condition. */ - return MP_FAIL_PATH; -} - -EXPORT_SYMBOL_GPL(dm_register_hw_handler); -EXPORT_SYMBOL_GPL(dm_unregister_hw_handler); -EXPORT_SYMBOL_GPL(dm_scsi_err_handler); diff --git a/drivers/md/dm-hw-handler.h b/drivers/md/dm-hw-handler.h deleted file mode 100644 index 46809dcb121..00000000000 --- a/drivers/md/dm-hw-handler.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2004 Red Hat, Inc. All rights reserved. - * - * This file is released under the GPL. - * - * Multipath hardware handler registration. - */ - -#ifndef DM_HW_HANDLER_H -#define DM_HW_HANDLER_H - -#include - -#include "dm-mpath.h" - -struct hw_handler_type; -struct hw_handler { - struct hw_handler_type *type; - struct mapped_device *md; - void *context; -}; - -/* - * Constructs a hardware handler object, takes custom arguments - */ -/* Information about a hardware handler type */ -struct hw_handler_type { - char *name; - struct module *module; - - int (*create) (struct hw_handler *handler, unsigned int argc, - char **argv); - void (*destroy) (struct hw_handler *hwh); - - void (*pg_init) (struct hw_handler *hwh, unsigned bypassed, - struct dm_path *path); - unsigned (*error) (struct hw_handler *hwh, struct bio *bio); - int (*status) (struct hw_handler *hwh, status_type_t type, - char *result, unsigned int maxlen); -}; - -/* Register a hardware handler */ -int dm_register_hw_handler(struct hw_handler_type *type); - -/* Unregister a hardware handler */ -int dm_unregister_hw_handler(struct hw_handler_type *type); - -/* Returns a registered hardware handler type */ -struct hw_handler_type *dm_get_hw_handler(const char *name); - -/* Releases a hardware handler */ -void dm_put_hw_handler(struct hw_handler_type *hwht); - -/* Default err function */ -unsigned dm_scsi_err_handler(struct hw_handler *hwh, struct bio *bio); - -/* Error flags for err and dm_pg_init_complete */ -#define MP_FAIL_PATH 1 -#define MP_BYPASS_PG 2 -#define MP_ERROR_IO 4 /* Don't retry this I/O */ -#define MP_RETRY 8 - -#endif diff --git a/drivers/md/dm-mpath.h b/drivers/md/dm-mpath.h index b9cdcbb3ed5..c198b856a45 100644 --- a/drivers/md/dm-mpath.h +++ b/drivers/md/dm-mpath.h @@ -16,7 +16,6 @@ struct dm_path { unsigned is_active; /* Read-only */ void *pscontext; /* For path-selector use */ - void *hwhcontext; /* For hw-handler use */ }; /* Callback for hwh_pg_init_fn to use when complete */ -- cgit v1.2.3-18-g5258 From fe9233fb6914a0eb20166c967e3020f7f0fba2c9 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Fri, 23 May 2008 18:16:40 -0700 Subject: [SCSI] scsi_dh: fix kconfig related build errors Do not automatically "select" SCSI_DH for dm-multipath. If SCSI_DH doesn't exist,just do not allow hardware handlers to be used. Handle SCSI_DH being a module also. Make sure it doesn't allow DM_MULTIPATH to be compiled in when SCSI_DH is a module. [jejb: added comment for Kconfig syntax] Signed-off-by: Chandra Seetharaman Reported-by: Randy Dunlap Reported-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/md/Kconfig | 6 +++++- drivers/md/dm-mpath.c | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/md') diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index b4a3c7d1451..07d92c11b5d 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -252,7 +252,11 @@ config DM_ZERO config DM_MULTIPATH tristate "Multipath target" depends on BLK_DEV_DM - select SCSI_DH + # nasty syntax but means make DM_MULTIPATH independent + # of SCSI_DH if the latter isn't defined but if + # it is, DM_MULTIPATH must depend on it. We get a build + # error if SCSI_DH=m and DM_MULTIPATH=y + depends on SCSI_DH || !SCSI_DH ---help--- Allow volume managers to support multipath hardware. diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index e8f704aa46f..9f7302d4878 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -664,6 +664,8 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m) request_module("scsi_dh_%s", m->hw_handler_name); if (scsi_dh_handler_exist(m->hw_handler_name) == 0) { ti->error = "unknown hardware handler type"; + kfree(m->hw_handler_name); + m->hw_handler_name = NULL; return -EINVAL; } consume(as, hw_argc - 1); -- cgit v1.2.3-18-g5258