From 6f07d31e46639e4b1b23de6ee88c9e079a7bf32d Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 15 Nov 2010 13:33:25 -0800 Subject: Input: aiptek - tighten up permissions on sysfs attributes Sysfs attributes affecting device behavior should not be, by default, world-writeable. If distributions want to allow console users access these attributes they need to employ udev and friends to adjust permissions as needed. Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/aiptek.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index 57b25b84d1f..0a619c558bf 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -1097,7 +1097,7 @@ store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const } static DEVICE_ATTR(pointer_mode, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletPointerMode, store_tabletPointerMode); /*********************************************************************** @@ -1134,7 +1134,7 @@ store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, co } static DEVICE_ATTR(coordinate_mode, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletCoordinateMode, store_tabletCoordinateMode); /*********************************************************************** @@ -1176,7 +1176,7 @@ store_tabletToolMode(struct device *dev, struct device_attribute *attr, const ch } static DEVICE_ATTR(tool_mode, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletToolMode, store_tabletToolMode); /*********************************************************************** @@ -1219,7 +1219,7 @@ store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char } static DEVICE_ATTR(xtilt, - S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt); + S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt); /*********************************************************************** * support routines for the 'ytilt' file. Note that this file @@ -1261,7 +1261,7 @@ store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char } static DEVICE_ATTR(ytilt, - S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt); + S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt); /*********************************************************************** * support routines for the 'jitter' file. Note that this file @@ -1288,7 +1288,7 @@ store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const } static DEVICE_ATTR(jitter, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletJitterDelay, store_tabletJitterDelay); /*********************************************************************** @@ -1317,7 +1317,7 @@ store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(delay, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletProgrammableDelay, store_tabletProgrammableDelay); /*********************************************************************** @@ -1406,7 +1406,7 @@ store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const } static DEVICE_ATTR(stylus_upper, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletStylusUpper, store_tabletStylusUpper); /*********************************************************************** @@ -1437,7 +1437,7 @@ store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const } static DEVICE_ATTR(stylus_lower, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletStylusLower, store_tabletStylusLower); /*********************************************************************** @@ -1475,7 +1475,7 @@ store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const c } static DEVICE_ATTR(mouse_left, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletMouseLeft, store_tabletMouseLeft); /*********************************************************************** @@ -1505,7 +1505,7 @@ store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const } static DEVICE_ATTR(mouse_middle, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletMouseMiddle, store_tabletMouseMiddle); /*********************************************************************** @@ -1535,7 +1535,7 @@ store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const } static DEVICE_ATTR(mouse_right, - S_IRUGO | S_IWUGO, + S_IRUGO | S_IWUSR, show_tabletMouseRight, store_tabletMouseRight); /*********************************************************************** @@ -1567,7 +1567,7 @@ store_tabletWheel(struct device *dev, struct device_attribute *attr, const char } static DEVICE_ATTR(wheel, - S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel); + S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel); /*********************************************************************** * support routines for the 'execute' file. Note that this file @@ -1600,7 +1600,7 @@ store_tabletExecute(struct device *dev, struct device_attribute *attr, const cha } static DEVICE_ATTR(execute, - S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute); + S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute); /*********************************************************************** * support routines for the 'odm_code' file. Note that this file -- cgit v1.2.3-70-g09d2 From de391d12500ede13faa7ecadbe900a8de1f76cfa Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Thu, 18 Nov 2010 09:06:43 -0800 Subject: Input: fix typo in keycode validation supporting large scancodes Check the input_keymap_entry keycode size (u32) instead of the device's (void*) when validating that keycode value can be stored in the keymap. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=22722 Signed-off-by: Mattia Dongili Tested-by: Norbert Preining Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/input.c b/drivers/input/input.c index 7f26ca6ecf7..5edc41aa08f 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -753,7 +753,7 @@ static int input_default_setkeycode(struct input_dev *dev, if (index >= dev->keycodemax) return -EINVAL; - if (dev->keycodesize < sizeof(dev->keycode) && + if (dev->keycodesize < sizeof(ke->keycode) && (ke->keycode >> (dev->keycodesize * 8))) return -EINVAL; -- cgit v1.2.3-70-g09d2 From 09910509ebc74643e94fe6f3feb4c23b019aeb34 Mon Sep 17 00:00:00 2001 From: Glenn Sommer Date: Mon, 22 Nov 2010 12:00:05 -0800 Subject: Input: usbtouchscreen - add support for LG Flatron T1710B I've recently got my hands on a LG Flatron T1710B touchscreen. As other LG products, this seems to use the ITM panel. Signed-off-by: Glenn Sommer Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/usbtouchscreen.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index f45f80f6d33..73fd6642b68 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -178,6 +178,7 @@ static const struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_TOUCHSCREEN_USB_ITM {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, + {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM}, #endif #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO -- cgit v1.2.3-70-g09d2 From a318e6b1a04c9d8882712508eb9c8a061796c06b Mon Sep 17 00:00:00 2001 From: David Foley Date: Tue, 30 Nov 2010 23:45:46 -0800 Subject: Input: wacom - add IDs for two new Bamboo PTs Add two new Bamboo Pen & Touch models: Bamboo Comic Medium (CTH661/S1; Product ID = 0xd8) Bamboo P & T Special Edition Small (CTH461/L; Product ID = 0xdA) Tested-by: IRIE Shinsuke Tested-by: Andrea Cadeddu Signed-off-by: David Foley Reviewed-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index b3252ef1e27..db747e4c4c4 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1436,6 +1436,10 @@ static struct wacom_features wacom_features_0xD2 = { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xD3 = { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xD8 = + { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xDA = + { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; #define USB_DEVICE_WACOM(prod) \ USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ @@ -1504,6 +1508,8 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xD1) }, { USB_DEVICE_WACOM(0xD2) }, { USB_DEVICE_WACOM(0xD3) }, + { USB_DEVICE_WACOM(0xD8) }, + { USB_DEVICE_WACOM(0xDA) }, { USB_DEVICE_WACOM(0xF0) }, { USB_DEVICE_WACOM(0xCC) }, { USB_DEVICE_WACOM(0x90) }, -- cgit v1.2.3-70-g09d2 From 3bfa321e662edf90fb8123a02c987c2965fa50bb Mon Sep 17 00:00:00 2001 From: Yan Li Date: Tue, 30 Nov 2010 23:51:03 -0800 Subject: Input: synaptics - fix handling of 2-button ClickPads Lenovo S10-3t's ClickPad is a 2-button ClickPad that reports BTN_LEFT and BTN_RIGHT as normal touchpad, unlike the 1-button ClickPad used in HP mini 210 that reports solely BTN_MIDDLE. In 0xc0-cap response, the 1-button ClickPad has the 20-bit set while 2-button ClickPad has the 8-bit set. This patch makes the kernel only handle 1-button ClickPad specially, and treat 2-button ClickPad in the same fashion as regular touchpads. This fixes kernel bug #18122 and MeeGo bug #4807. Signed-off-by: Yan Li Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 613a3652f98..0aefaa88587 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -51,7 +51,8 @@ #define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) #define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) -#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100) +#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */ +#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */ #define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000) /* synaptics modes query bits */ -- cgit v1.2.3-70-g09d2 From 8ed9e0e1b602a0bcdc3bef52ec05fdab5b484341 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Wed, 1 Dec 2010 09:19:45 -0800 Subject: Input: turbografx - fix reference counting The ref-count of parport gained from parport_find_number() was not released in normal path. Signed-off-by: Namhyung Kim Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/turbografx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/input') diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index d53b9e90023..27b6a3ce18c 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -245,6 +245,7 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs) goto err_free_tgfx; } + parport_put_port(pp); return tgfx; err_free_dev: -- cgit v1.2.3-70-g09d2 From 7bfbeae9c78fb9404ccbd62a25c82f5860432ac9 Mon Sep 17 00:00:00 2001 From: Guy Martin Date: Tue, 2 Nov 2010 15:23:08 +0000 Subject: parisc: Fix GSC PS/2 driver name for keyboard and mouse Fix kernel warnings caused by the driver name of GSC PS/2 containing '/'. The following warnings are observed on a K410 system : [ 10.700000] name 'GSC PS/2 keyboard' [ 10.732000] ------------[ cut here ]------------ [ 10.772000] WARNING: at fs/proc/generic.c:323 [ 10.828000] Modules linked in: [ 10.916000] [ 10.916000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 10.936000] PSW: 00000000000001000000000000001111 Not tainted [ 10.992000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 11.060000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 11.124000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 11.184000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 11.248000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 11.308000] r20-23 00000000 00000028 104cd858 00000000 [ 11.372000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 11.436000] r28-31 0000002b 00000078 4fc40800 0000000d [ 11.496000] sr00-03 00000000 00000000 00000000 00000000 [ 11.560000] sr04-07 00000000 00000000 00000000 00000000 [ 11.624000] [ 11.688000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 11.704000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 11.772000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 11.836000] ORIG_R28: 4fc40940 [ 11.904000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 11.940000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 11.996000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 12.052000] Backtrace: [ 12.108000] [<10257790>] vsnprintf+0x290/0x4f4 [ 12.136000] [ 12.188000] ---[ end trace 91bf6ece17e322dd ]--- [ 12.208000] serio: GSC PS/2 keyboard port at 0x0001c000 irq 19 @ 10:12:7 [ 12.264000] name 'GSC PS/2 mouse' [ 12.344000] ------------[ cut here ]------------ [ 12.384000] WARNING: at fs/proc/generic.c:323 [ 12.436000] Modules linked in: [ 12.524000] [ 12.528000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 12.544000] PSW: 00000000000001000000000000001111 Tainted: G W [ 12.600000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 12.680000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 12.740000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 12.804000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 12.868000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 12.928000] r20-23 00000000 00000025 104cd858 00000000 [ 12.992000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 13.056000] r28-31 00000028 00000078 4fc40800 0000000d [ 13.116000] sr00-03 00000000 00000000 00000000 00000000 [ 13.180000] sr04-07 00000000 00000000 00000000 00000000 [ 13.244000] [ 13.308000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 13.324000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 13.392000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 13.456000] ORIG_R28: 4fc40940 [ 13.524000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 13.560000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 13.616000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 13.672000] Backtrace: [ 13.728000] [<10257790>] vsnprintf+0x290/0x4f4 [ 13.756000] [ 13.808000] ---[ end trace 91bf6ece17e322de ]--- [ 13.828000] serio: GSC PS/2 mouse port at 0x00020100 irq 19 @ 10:12:8 Signed-off-by: Guy Martin Acked-by: Helge Deller Signed-off-by: Kyle McMartin --- drivers/input/serio/gscps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 3c287dd879d..4225f5d6b15 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -358,7 +358,7 @@ static int __devinit gscps2_probe(struct parisc_device *dev) gscps2_reset(ps2port); ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f; - snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s", + snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s", (ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse"); strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys)); serio->id.type = SERIO_8042; -- cgit v1.2.3-70-g09d2 From 0e7d0c860a0dee49dacb7bbb248d1eba637075ad Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 6 Dec 2010 17:14:47 -0800 Subject: Input: add input driver for polled GPIO buttons The existing gpio-keys driver can be usable only for GPIO lines with interrupt support. Several devices have buttons connected to a GPIO line which is not capable to generate interrupts. This patch adds a new input driver using the generic GPIO layer and the input-polldev to support such buttons. [Ben Gardiner Signed-off-by: Ben Gardiner Tested-by: Ben Gardiner Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 16 ++ drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/gpio_keys_polled.c | 261 ++++++++++++++++++++++++++++++ include/linux/gpio_keys.h | 2 + 4 files changed, 280 insertions(+) create mode 100644 drivers/input/keyboard/gpio_keys_polled.c (limited to 'drivers/input') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b8c51b9781d..3a87f3ba5f7 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -179,6 +179,22 @@ config KEYBOARD_GPIO To compile this driver as a module, choose M here: the module will be called gpio_keys. +config KEYBOARD_GPIO_POLLED + tristate "Polled GPIO buttons" + depends on GENERIC_GPIO + select INPUT_POLLDEV + help + This driver implements support for buttons connected + to GPIO pins that are not capable of generating interrupts. + + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. + + To compile this driver as a module, choose M here: the + module will be called gpio_keys_polled. + config KEYBOARD_TCA6416 tristate "TCA6416 Keypad Support" depends on I2C diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a34452e8ebe..622de73a445 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o +obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c new file mode 100644 index 00000000000..4c17aff2065 --- /dev/null +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -0,0 +1,261 @@ +/* + * Driver for buttons on GPIO lines not capable of generating interrupts + * + * Copyright (C) 2007-2010 Gabor Juhos + * Copyright (C) 2010 Nuno Goncalves + * + * This file was based on: /drivers/input/misc/cobalt_btns.c + * Copyright (C) 2007 Yoichi Yuasa + * + * also was based on: /drivers/input/keyboard/gpio_keys.c + * Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "gpio-keys-polled" + +struct gpio_keys_button_data { + int last_state; + int count; + int threshold; + int can_sleep; +}; + +struct gpio_keys_polled_dev { + struct input_polled_dev *poll_dev; + struct device *dev; + struct gpio_keys_platform_data *pdata; + struct gpio_keys_button_data data[0]; +}; + +static void gpio_keys_polled_check_state(struct input_dev *input, + struct gpio_keys_button *button, + struct gpio_keys_button_data *bdata) +{ + int state; + + if (bdata->can_sleep) + state = !!gpio_get_value_cansleep(button->gpio); + else + state = !!gpio_get_value(button->gpio); + + if (state != bdata->last_state) { + unsigned int type = button->type ?: EV_KEY; + + input_event(input, type, button->code, + !!(state ^ button->active_low)); + input_sync(input); + bdata->count = 0; + bdata->last_state = state; + } +} + +static void gpio_keys_polled_poll(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + struct input_dev *input = dev->input; + int i; + + for (i = 0; i < bdev->pdata->nbuttons; i++) { + struct gpio_keys_button_data *bdata = &bdev->data[i]; + + if (bdata->count < bdata->threshold) + bdata->count++; + else + gpio_keys_polled_check_state(input, &pdata->buttons[i], + bdata); + } +} + +static void gpio_keys_polled_open(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + + if (pdata->enable) + pdata->enable(bdev->dev); +} + +static void gpio_keys_polled_close(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + + if (pdata->disable) + pdata->disable(bdev->dev); +} + +static int __devinit gpio_keys_polled_probe(struct platform_device *pdev) +{ + struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct gpio_keys_polled_dev *bdev; + struct input_polled_dev *poll_dev; + struct input_dev *input; + int error; + int i; + + if (!pdata || !pdata->poll_interval) + return -EINVAL; + + bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) + + pdata->nbuttons * sizeof(struct gpio_keys_button_data), + GFP_KERNEL); + if (!bdev) { + dev_err(dev, "no memory for private data\n"); + return -ENOMEM; + } + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + dev_err(dev, "no memory for polled device\n"); + error = -ENOMEM; + goto err_free_bdev; + } + + poll_dev->private = bdev; + poll_dev->poll = gpio_keys_polled_poll; + poll_dev->poll_interval = pdata->poll_interval; + poll_dev->open = gpio_keys_polled_open; + poll_dev->close = gpio_keys_polled_close; + + input = poll_dev->input; + + input->evbit[0] = BIT(EV_KEY); + input->name = pdev->name; + input->phys = DRV_NAME"/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_keys_button *button = &pdata->buttons[i]; + struct gpio_keys_button_data *bdata = &bdev->data[i]; + unsigned int gpio = button->gpio; + unsigned int type = button->type ?: EV_KEY; + + if (button->wakeup) { + dev_err(dev, DRV_NAME " does not support wakeup\n"); + error = -EINVAL; + goto err_free_gpio; + } + + error = gpio_request(gpio, + button->desc ? button->desc : DRV_NAME); + if (error) { + dev_err(dev, "unable to claim gpio %u, err=%d\n", + gpio, error); + goto err_free_gpio; + } + + error = gpio_direction_input(gpio); + if (error) { + dev_err(dev, + "unable to set direction on gpio %u, err=%d\n", + gpio, error); + goto err_free_gpio; + } + + bdata->can_sleep = gpio_cansleep(gpio); + bdata->last_state = -1; + bdata->threshold = DIV_ROUND_UP(button->debounce_interval, + pdata->poll_interval); + + input_set_capability(input, type, button->code); + } + + bdev->poll_dev = poll_dev; + bdev->dev = dev; + bdev->pdata = pdata; + platform_set_drvdata(pdev, bdev); + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(dev, "unable to register polled device, err=%d\n", + error); + goto err_free_gpio; + } + + /* report initial state of the buttons */ + for (i = 0; i < pdata->nbuttons; i++) + gpio_keys_polled_check_state(input, &pdata->buttons[i], + &bdev->data[i]); + + return 0; + +err_free_gpio: + while (--i >= 0) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(poll_dev); + +err_free_bdev: + kfree(bdev); + + platform_set_drvdata(pdev, NULL); + return error; +} + +static int __devexit gpio_keys_polled_remove(struct platform_device *pdev) +{ + struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev); + struct gpio_keys_platform_data *pdata = bdev->pdata; + int i; + + input_unregister_polled_device(bdev->poll_dev); + + for (i = 0; i < pdata->nbuttons; i++) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(bdev->poll_dev); + + kfree(bdev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver gpio_keys_polled_driver = { + .probe = gpio_keys_polled_probe, + .remove = __devexit_p(gpio_keys_polled_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init gpio_keys_polled_init(void) +{ + return platform_driver_register(&gpio_keys_polled_driver); +} + +static void __exit gpio_keys_polled_exit(void) +{ + platform_driver_unregister(&gpio_keys_polled_driver); +} + +module_init(gpio_keys_polled_init); +module_exit(gpio_keys_polled_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION("Polled GPIO Buttons driver"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index ce73a30113b..dd1a56fbe92 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -16,6 +16,8 @@ struct gpio_keys_button { struct gpio_keys_platform_data { struct gpio_keys_button *buttons; int nbuttons; + unsigned int poll_interval; /* polling interval in msecs - + for polling driver only */ unsigned int rep:1; /* enable input subsystem auto repeat */ int (*enable)(struct device *dev); void (*disable)(struct device *dev); -- cgit v1.2.3-70-g09d2 From 47d092352c132a2d0ee4156b5dca263eaad2c17f Mon Sep 17 00:00:00 2001 From: David Foley Date: Tue, 7 Dec 2010 21:05:59 -0800 Subject: Input: wacom - add new Bamboo PT (0xdb) Adds new Bamboo Pen & Touch model - Bamboo P & T Special Edition Medium (CTH661/L; Product ID = 0xdb). Tested-by: Tobias Verbeke Signed-off-by: David Foley Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index db747e4c4c4..4852b440960 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1440,6 +1440,8 @@ static struct wacom_features wacom_features_0xD8 = { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xDA = { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xDB = + { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; #define USB_DEVICE_WACOM(prod) \ USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ @@ -1510,6 +1512,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xD3) }, { USB_DEVICE_WACOM(0xD8) }, { USB_DEVICE_WACOM(0xDA) }, + { USB_DEVICE_WACOM(0xDB) }, { USB_DEVICE_WACOM(0xF0) }, { USB_DEVICE_WACOM(0xCC) }, { USB_DEVICE_WACOM(0x90) }, -- cgit v1.2.3-70-g09d2 From 57a7872fa0f03e90be0fa224b9ea533f5b03ee4f Mon Sep 17 00:00:00 2001 From: Kevin Granade Date: Fri, 10 Dec 2010 23:04:02 -0800 Subject: Input: wacom - add another Bamboo Pen ID (0xd4) Add the features struct and device table entry to enable yet another version of Wacom Bamboo Pen (CTL460, Product ID 0xD4). Signed-off-by: Kevin Granade Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 4852b440960..435b0af401e 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1436,6 +1436,8 @@ static struct wacom_features wacom_features_0xD2 = { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xD3 = { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; +static const struct wacom_features wacom_features_0xD4 = + { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xD8 = { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xDA = @@ -1510,6 +1512,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xD1) }, { USB_DEVICE_WACOM(0xD2) }, { USB_DEVICE_WACOM(0xD3) }, + { USB_DEVICE_WACOM(0xD4) }, { USB_DEVICE_WACOM(0xD8) }, { USB_DEVICE_WACOM(0xDA) }, { USB_DEVICE_WACOM(0xDB) }, -- cgit v1.2.3-70-g09d2 From ab4e0192196b8d4e43a3945742d4996da934a86f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 14 Dec 2010 23:53:21 -0800 Subject: Input: define separate EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2 The desire to keep old names for the EVIOCGKEYCODE/EVIOCSKEYCODE while extending them to support large scancodes was a mistake. While we tried to keep ABI intact (and we succeeded in doing that, programs compiled on older kernels will work on newer ones) there is still a problem with recompiling existing software with newer kernel headers. New kernel headers will supply updated ioctl numbers and kernel will expect that userspace will use struct input_keymap_entry to set and retrieve keymap data. But since the names of ioctls are still the same userspace will happily compile even if not adjusted to make use of the new structure and will start miraculously fail in the field. To avoid this issue let's revert EVIOCGKEYCODE/EVIOCSKEYCODE definitions and add EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2 so that userspace can explicitly select the style of ioctls it wants to employ. Reviewed-by: Henrik Rydberg Acked-by: Jarod Wilson Acked-by: Mauro Carvalho Chehab Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 113 ++++++++++++++++++++++++++------------------------ include/linux/input.h | 6 ++- 2 files changed, 62 insertions(+), 57 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index e3f7fc6f956..68f09a86843 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -534,76 +534,73 @@ static int handle_eviocgbit(struct input_dev *dev, } #undef OLD_KEY_MAX -static int evdev_handle_get_keycode(struct input_dev *dev, - void __user *p, size_t size) +static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p) { - struct input_keymap_entry ke; + struct input_keymap_entry ke = { + .len = sizeof(unsigned int), + .flags = 0, + }; + int __user *ip = (int __user *)p; int error; - memset(&ke, 0, sizeof(ke)); - - if (size == sizeof(unsigned int[2])) { - /* legacy case */ - int __user *ip = (int __user *)p; + /* legacy case */ + if (copy_from_user(ke.scancode, p, sizeof(unsigned int))) + return -EFAULT; - if (copy_from_user(ke.scancode, p, sizeof(unsigned int))) - return -EFAULT; + error = input_get_keycode(dev, &ke); + if (error) + return error; - ke.len = sizeof(unsigned int); - ke.flags = 0; + if (put_user(ke.keycode, ip + 1)) + return -EFAULT; - error = input_get_keycode(dev, &ke); - if (error) - return error; + return 0; +} - if (put_user(ke.keycode, ip + 1)) - return -EFAULT; +static int evdev_handle_get_keycode_v2(struct input_dev *dev, void __user *p) +{ + struct input_keymap_entry ke; + int error; - } else { - size = min(size, sizeof(ke)); + if (copy_from_user(&ke, p, sizeof(ke))) + return -EFAULT; - if (copy_from_user(&ke, p, size)) - return -EFAULT; + error = input_get_keycode(dev, &ke); + if (error) + return error; - error = input_get_keycode(dev, &ke); - if (error) - return error; + if (copy_to_user(p, &ke, sizeof(ke))) + return -EFAULT; - if (copy_to_user(p, &ke, size)) - return -EFAULT; - } return 0; } -static int evdev_handle_set_keycode(struct input_dev *dev, - void __user *p, size_t size) +static int evdev_handle_set_keycode(struct input_dev *dev, void __user *p) { - struct input_keymap_entry ke; - - memset(&ke, 0, sizeof(ke)); + struct input_keymap_entry ke = { + .len = sizeof(unsigned int), + .flags = 0, + }; + int __user *ip = (int __user *)p; - if (size == sizeof(unsigned int[2])) { - /* legacy case */ - int __user *ip = (int __user *)p; + if (copy_from_user(ke.scancode, p, sizeof(unsigned int))) + return -EFAULT; - if (copy_from_user(ke.scancode, p, sizeof(unsigned int))) - return -EFAULT; + if (get_user(ke.keycode, ip + 1)) + return -EFAULT; - if (get_user(ke.keycode, ip + 1)) - return -EFAULT; + return input_set_keycode(dev, &ke); +} - ke.len = sizeof(unsigned int); - ke.flags = 0; +static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p) +{ + struct input_keymap_entry ke; - } else { - size = min(size, sizeof(ke)); + if (copy_from_user(&ke, p, sizeof(ke))) + return -EFAULT; - if (copy_from_user(&ke, p, size)) - return -EFAULT; - - if (ke.len > sizeof(ke.scancode)) - return -EINVAL; - } + if (ke.len > sizeof(ke.scancode)) + return -EINVAL; return input_set_keycode(dev, &ke); } @@ -669,6 +666,18 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, return evdev_grab(evdev, client); else return evdev_ungrab(evdev, client); + + case EVIOCGKEYCODE: + return evdev_handle_get_keycode(dev, p); + + case EVIOCSKEYCODE: + return evdev_handle_set_keycode(dev, p); + + case EVIOCGKEYCODE_V2: + return evdev_handle_get_keycode_v2(dev, p); + + case EVIOCSKEYCODE_V2: + return evdev_handle_set_keycode_v2(dev, p); } size = _IOC_SIZE(cmd); @@ -708,12 +717,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, return -EFAULT; return error; - - case EVIOC_MASK_SIZE(EVIOCGKEYCODE): - return evdev_handle_get_keycode(dev, p, size); - - case EVIOC_MASK_SIZE(EVIOCSKEYCODE): - return evdev_handle_set_keycode(dev, p, size); } /* Multi-number variable-length handlers */ diff --git a/include/linux/input.h b/include/linux/input.h index a8af21d42bc..9777668883b 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -104,8 +104,10 @@ struct input_keymap_entry { #define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ #define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ -#define EVIOCGKEYCODE _IOR('E', 0x04, struct input_keymap_entry) /* get keycode */ -#define EVIOCSKEYCODE _IOW('E', 0x04, struct input_keymap_entry) /* set keycode */ +#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ +#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) +#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ +#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ -- cgit v1.2.3-70-g09d2