From 0de57fb93b1daaeaecb658a98b3299ae460c02e9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-tape: remove back-to-back REQUEST_SENSE detection Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cb942a9b580..3a53e0834cf 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, { idetape_tape_t *tape = drive->driver_data; - if (drive->pc->c[0] == REQUEST_SENSE && - pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " - "Two request sense in serial were issued\n"); - } - if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) drive->failed_pc = pc; -- cgit v1.2.3-18-g5258 From 220d06b5531e7b8a6226b2fdfb21198c3ccc4f76 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide: use blk_run_queue() instead of blk_start_queueing() blk_start_queueing() is being phased out in favor of [__]blk_run_queue(). Switch. Signed-off-by: Tejun Heo --- drivers/ide/ide-park.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index 310d03f2b5b..a914023d6d0 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -24,11 +24,8 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) start_queue = 1; spin_unlock_irq(&hwif->lock); - if (start_queue) { - spin_lock_irq(q->queue_lock); - blk_start_queueing(q); - spin_unlock_irq(q->queue_lock); - } + if (start_queue) + blk_run_queue(q); return; } spin_unlock_irq(&hwif->lock); -- cgit v1.2.3-18-g5258 From b2963ac1738542d30305d7e12c8c078a383a425c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide: don't set REQ_SOFTBARRIER ide doesn't have to worry about REQ_SOFTBARRIER. Don't set it. Signed-off-by: Tejun Heo --- drivers/ide/ide-disk.c | 1 - drivers/ide/ide-ioctls.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index a9fbe2c3121..c2438804d3c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -411,7 +411,6 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) cmd->protocol = ATA_PROT_NODATA; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->cmd_flags |= REQ_SOFTBARRIER; rq->special = cmd; } diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index c1c25ebbaa1..5991b23793f 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -231,7 +231,6 @@ static int generic_drive_reset(ide_drive_t *drive) rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_len = 1; rq->cmd[0] = REQ_DRIVE_RESET; - rq->cmd_flags |= REQ_SOFTBARRIER; if (blk_execute_rq(drive->queue, NULL, rq, 1)) ret = rq->errors; blk_put_request(rq); -- cgit v1.2.3-18-g5258 From 59a4f6f355fc718581ddcf1bb45a469d4756c035 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-cd: clear sense buffer before issuing request sense Impact: code simplification ide_cd_request_sense_fixup() clears the tail of the sense buffer if the device didn't completely fill it. This patch makes cdrom_queue_request_sense() clear the sense buffer before issuing the command instead of clearing it afterwards. This simplifies code and eases future changes. Signed-off-by: Tejun Heo --- drivers/ide/ide-cd.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3d4e0996976..b6a0d126b57 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -217,6 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, if (sense == NULL) sense = &info->sense_data; + memset(sense, 0, 18); + /* stuff the sense request in front of our current request */ blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_ATA_PC; @@ -504,14 +506,8 @@ static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd) * and some drives don't send them. Sigh. */ if (rq->cmd[0] == GPCMD_REQUEST_SENSE && - cmd->nleft > 0 && cmd->nleft <= 5) { - unsigned int ofs = cmd->nbytes - cmd->nleft; - - while (cmd->nleft > 0) { - *((u8 *)rq->data + ofs++) = 0; - cmd->nleft--; - } - } + cmd->nleft > 0 && cmd->nleft <= 5) + cmd->nleft = 0; } int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, -- cgit v1.2.3-18-g5258 From 8968932e54db35cf9d69cfbbd50c26dfaaa586c7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-floppy: block pc always uses bio Impact: remove unnecessary code path Block pc requests always use bio and rq->data is always NULL. No need to worry about !rq->bio cases in idefloppy_block_pc_cmd(). Note that ide-atapi uses ide_pio_bytes() for bio PIO transfer which handle sg fine. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-floppy.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 2b4868d95f8..3b22e066287 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -216,15 +216,13 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - if (rq->data_len && rq_data_dir(rq) == WRITE) - pc->flags |= PC_FLAG_WRITING; - pc->buf = rq->data; - if (rq->bio) + if (rq->data_len) { pc->flags |= PC_FLAG_DMA_OK; - /* - * possibly problematic, doesn't look like ide-floppy correctly - * handled scattered requests if dma fails... - */ + if (rq_data_dir(rq) == WRITE) + pc->flags |= PC_FLAG_WRITING; + } + /* pio will be performed by ide_pio_bytes() which handles sg fine */ + pc->buf = NULL; pc->req_xfer = pc->buf_size = rq->data_len; } -- cgit v1.2.3-18-g5258 From d868ca24302e99a0e8a86071ca2c66273edf97d9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-taskfile: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide_raw_taskfile() directly uses rq->buffer to carry pointer to the data buffer. This complicates both block interface and ide backend request handling. Use blk_rq_map_kern() instead and drop special handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg(). Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it to initialize bio rw flag. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 5 +---- drivers/ide/ide-taskfile.c | 18 +++++++++++------- 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d3b2c..9b9e8b1aae5 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -248,10 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) struct scatterlist *sg = hwif->sg_table; struct request *rq = cmd->rq; - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE); - cmd->sg_nents = 1; - } else if (!rq->bio) { + if (!rq->bio) { sg_init_one(sg, rq->data, rq->data_len); cmd->sg_nents = 1; } else diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 4aa6223c11b..f400eb4d4af 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -424,7 +424,9 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->buffer = buf; + + if (cmd->tf_flags & IDE_TFLAG_WRITE) + rq->cmd_flags |= REQ_RW; /* * (ks) We transfer currently only whole sectors. @@ -432,18 +434,20 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - rq->hard_nr_sectors = rq->nr_sectors = nsect; - rq->hard_cur_sectors = rq->current_nr_sectors = nsect; - - if (cmd->tf_flags & IDE_TFLAG_WRITE) - rq->cmd_flags |= REQ_RW; + if (nsect) { + error = blk_rq_map_kern(drive->queue, rq, buf, + nsect * SECTOR_SIZE, __GFP_WAIT); + if (error) + goto put_req; + } rq->special = cmd; cmd->rq = rq; error = blk_execute_rq(drive->queue, NULL, rq, 0); - blk_put_request(rq); +put_req: + blk_put_request(rq); return error; } -- cgit v1.2.3-18-g5258 From ac0b0113ddbab3ed2388132d368c97292f9f3c84 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-atapi: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide-atapi uses rq->buffer as private opaque value for internal special requests. rq->special isn't used for these cases (the only case where rq->special is used is for ide-tape rw requests). Use rq->special instead. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 4 ++-- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-tape.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 7201b176d75..2894577237b 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -90,7 +90,7 @@ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; - rq->buffer = (char *)pc; + rq->special = (char *)pc; rq->rq_disk = disk; if (pc->req_xfer) { @@ -119,7 +119,7 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; - rq->buffer = (char *)pc; + rq->special = (char *)pc; if (pc->req_xfer) { rq->data = pc->buf; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3b22e066287..94600331a27 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -264,7 +264,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); } else if (blk_special_request(rq)) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; } else if (blk_pc_request(rq)) { pc = &floppy->queued_pc; idefloppy_blockpc_cmd(floppy, pc, rq); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3a53e0834cf..aadf53cfac6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -828,7 +828,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, goto out; } if (rq->cmd[13] & REQ_IDETAPE_PC1) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; rq->cmd[13] &= ~(REQ_IDETAPE_PC1); rq->cmd[13] |= REQ_IDETAPE_PC2; goto out; -- cgit v1.2.3-18-g5258 From 1f181d2b1569dfb88a584a6e1847e9e1c7645951 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide-cd uses rq->buffer to carry pointer to the original request when issuing REQUEST_SENSE. Use rq->special instead. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-cd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index b6a0d126b57..bb77c79c101 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -232,8 +232,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->cmd_type = REQ_TYPE_SENSE; rq->cmd_flags |= REQ_PREEMPT; - /* NOTE! Save the failed command in "rq->buffer" */ - rq->buffer = (void *) failed_command; + /* NOTE! Save the failed command in "rq->special" */ + rq->special = (void *)failed_command; if (failed_command) ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x", @@ -247,10 +247,10 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* - * For REQ_TYPE_SENSE, "rq->buffer" points to the original + * For REQ_TYPE_SENSE, "rq->special" points to the original * failed request */ - struct request *failed = (struct request *)rq->buffer; + struct request *failed = (struct request *)rq->special; struct cdrom_info *info = drive->driver_data; void *sense = &info->sense_data; -- cgit v1.2.3-18-g5258 From e69d800f7e8797a8e3423380ee9d8ca1cb90c388 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide: add helpers for preparing sense requests This is in preparation of removing the queueing of a sense request out of the IRQ handler path. Use struct request_sense as a general sense buffer for all ATAPI devices ide-{floppy,tape,cd}. tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as it can cause deadlock. Converted to use inline struct request and blk_rq_init(). * Added xfer / cdb len selection depending on device type. * All sense prep logics folded into ide_prep_sense() which never fails. * hwif->rq clearing and sense_rq used handling moved into ide_queue_sense_rq(). * blk_rq_map_kern() conversion is moved to later patch. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 2894577237b..c6e03485a63 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -191,6 +191,67 @@ void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); +void ide_prep_sense(ide_drive_t *drive, struct request *rq) +{ + struct request_sense *sense = &drive->sense_data; + struct request *sense_rq = &drive->sense_rq; + unsigned int cmd_len, sense_len; + + debug_log("%s: enter\n", __func__); + + switch (drive->media) { + case ide_floppy: + cmd_len = 255; + sense_len = 18; + break; + case ide_tape: + cmd_len = 20; + sense_len = 20; + break; + default: + cmd_len = 18; + sense_len = 18; + } + + BUG_ON(sense_len > sizeof(*sense)); + + if (blk_sense_request(rq) || drive->sense_rq_armed) + return; + + memset(sense, 0, sizeof(*sense)); + + blk_rq_init(rq->q, sense_rq); + sense_rq->rq_disk = rq->rq_disk; + + sense_rq->data = sense; + sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; + sense_rq->cmd[4] = cmd_len; + sense_rq->data_len = sense_len; + + sense_rq->cmd_type = REQ_TYPE_SENSE; + sense_rq->cmd_flags |= REQ_PREEMPT; + + if (drive->media == ide_tape) + sense_rq->cmd[13] = REQ_IDETAPE_PC1; + + drive->sense_rq_armed = true; +} +EXPORT_SYMBOL_GPL(ide_prep_sense); + +void ide_queue_sense_rq(ide_drive_t *drive, void *special) +{ + BUG_ON(!drive->sense_rq_armed); + + drive->sense_rq.special = special; + drive->sense_rq_armed = false; + + drive->hwif->rq = NULL; + + elv_add_request(drive->queue, &drive->sense_rq, + ELEVATOR_INSERT_FRONT, 0); +} +EXPORT_SYMBOL_GPL(ide_queue_sense_rq); + /* * Called when an error was detected during the last packet command. * We queue a request sense packet command in the head of the request list. -- cgit v1.2.3-18-g5258 From c457ce874a0f3dfa3d5e9f2309789f6f34e24325 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd: convert to using generic sense request Preallocate a sense request in the ->do_request method and reinitialize it only on demand, in case it's been consumed in the IRQ handler path. The reason for this is that we don't want to be mapping rq to bio in the IRQ path and introduce all kinds of unnecessary hacks to the block layer. tj: * Both user and kernel PC requests expect sense data to be stored in separate storage other than drive->sense_data. Copy sense data to rq->sense on completion if rq->sense is not NULL. This fixes bogus sense data on PC requests. As a result, remove cdrom_queue_request_sense. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-cd.c | 54 ++++++++++++---------------------------------------- drivers/ide/ide-cd.h | 4 ---- 2 files changed, 12 insertions(+), 46 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index bb77c79c101..061d7bbcd34 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -206,44 +206,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, ide_cd_log_error(drive->name, failed_command, sense); } -static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, - struct request *failed_command) -{ - struct cdrom_info *info = drive->driver_data; - struct request *rq = &drive->request_sense_rq; - - ide_debug_log(IDE_DBG_SENSE, "enter"); - - if (sense == NULL) - sense = &info->sense_data; - - memset(sense, 0, 18); - - /* stuff the sense request in front of our current request */ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_ATA_PC; - rq->rq_disk = info->disk; - - rq->data = sense; - rq->cmd[0] = GPCMD_REQUEST_SENSE; - rq->cmd[4] = 18; - rq->data_len = 18; - - rq->cmd_type = REQ_TYPE_SENSE; - rq->cmd_flags |= REQ_PREEMPT; - - /* NOTE! Save the failed command in "rq->special" */ - rq->special = (void *)failed_command; - - if (failed_command) - ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x", - failed_command->cmd[0]); - - drive->hwif->rq = NULL; - - elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); -} - static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* @@ -251,11 +213,16 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) * failed request */ struct request *failed = (struct request *)rq->special; - struct cdrom_info *info = drive->driver_data; - void *sense = &info->sense_data; + struct request_sense *sense = &drive->sense_data; if (failed) { if (failed->sense) { + /* + * Sense is always read into drive->sense_data. + * Copy back if the failed request has its + * sense pointer set. + */ + memcpy(failed->sense, sense, 18); sense = failed->sense; failed->sense_len = rq->sense_len; } @@ -431,7 +398,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* if we got a CHECK_CONDITION status, queue a request sense command */ if (stat & ATA_ERR) - cdrom_queue_request_sense(drive, NULL, NULL); + ide_queue_sense_rq(drive, NULL); return 1; end_request: @@ -445,7 +412,7 @@ end_request: hwif->rq = NULL; - cdrom_queue_request_sense(drive, rq->sense, rq); + ide_queue_sense_rq(drive, rq); return 1; } else return 2; @@ -893,6 +860,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, goto out_end; } + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 1d97101099c..93a3cf1b0f3 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -87,10 +87,6 @@ struct cdrom_info { struct atapi_toc *toc; - /* The result of the last successful request sense command - on this device. */ - struct request_sense sense_data; - u8 max_speed; /* Max speed of the drive. */ u8 current_speed; /* Current speed of the drive. */ -- cgit v1.2.3-18-g5258 From 068753203e6cd085664a62e0fc0636e19b148a12 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer Since we're issuing REQ_TYPE_SENSE now we need to allow those types of rqs in the ->do_request callbacks. As a future improvement, sense_len assignment might be unified across all ATAPI devices. Borislav to check with specs and test. As a result, get rid of ide_queue_pc_head() and drive->request_sense_rq. tj: * Init request sense ide_atapi_pc from sense request. In the longer timer, it would probably better to fold ide_create_request_sense_cmd() into its only current user - ide_floppy_get_format_progress(). * ide_retry_pc() no longer takes @disk. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 48 ++++++++++++++---------------------------------- drivers/ide/ide-floppy.c | 4 +++- drivers/ide/ide-tape.c | 7 +++++-- 3 files changed, 22 insertions(+), 37 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index c6e03485a63..972c522516f 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -79,34 +79,6 @@ void ide_init_pc(struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_init_pc); -/* - * Generate a new packet command request in front of the request queue, before - * the current request, so that it will be processed immediately, on the next - * pass through the driver. - */ -static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, - struct ide_atapi_pc *pc, struct request *rq) -{ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_flags |= REQ_PREEMPT; - rq->special = (char *)pc; - rq->rq_disk = disk; - - if (pc->req_xfer) { - rq->data = pc->buf; - rq->data_len = pc->req_xfer; - } - - memcpy(rq->cmd, pc->c, 12); - if (drive->media == ide_tape) - rq->cmd[13] = REQ_IDETAPE_PC1; - - drive->hwif->rq = NULL; - - elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); -} - /* * Add a special packet command request to the tail of the request queue, * and wait for it to be serviced. @@ -254,18 +226,26 @@ EXPORT_SYMBOL_GPL(ide_queue_sense_rq); /* * Called when an error was detected during the last packet command. - * We queue a request sense packet command in the head of the request list. + * We queue a request sense packet command at the head of the request + * queue. */ -void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk) +void ide_retry_pc(ide_drive_t *drive) { - struct request *rq = &drive->request_sense_rq; + struct request *sense_rq = &drive->sense_rq; struct ide_atapi_pc *pc = &drive->request_sense_pc; (void)ide_read_error(drive); - ide_create_request_sense_cmd(drive, pc); + + /* init pc from sense_rq */ + ide_init_pc(pc); + memcpy(pc->c, sense_rq->cmd, 12); + pc->buf = sense_rq->data; + pc->req_xfer = sense_rq->data_len; + if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_pc_head(drive, disk, pc, rq); + + ide_queue_sense_rq(drive, pc); } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -404,7 +384,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) debug_log("[cmd %x]: check condition\n", rq->cmd[0]); /* Retry operation */ - ide_retry_pc(drive, rq->rq_disk); + ide_retry_pc(drive); /* queued, but not started */ return ide_stopped; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 94600331a27..d3302cc891e 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -263,7 +263,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, } pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); - } else if (blk_special_request(rq)) { + } else if (blk_special_request(rq) || blk_sense_request(rq)) { pc = (struct ide_atapi_pc *)rq->special; } else if (blk_pc_request(rq)) { pc = &floppy->queued_pc; @@ -273,6 +273,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, goto out_end; } + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index aadf53cfac6..8324dfa78a3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -695,7 +695,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ - ide_retry_pc(drive, tape->disk); + ide_retry_pc(drive); return ide_stopped; } pc->error = 0; @@ -752,7 +752,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, (unsigned long long)rq->sector, rq->nr_sectors, rq->current_nr_sectors); - if (!blk_special_request(rq)) { + if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ printk(KERN_NOTICE "ide-tape: %s: Unsupported request in " "request queue (%d)\n", drive->name, rq->cmd_type); @@ -840,6 +840,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, BUG(); out: + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) -- cgit v1.2.3-18-g5258 From 02e7cf8f848841ca21864ccd019e480b73c323b7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd,atapi: use bio for internal commands Impact: unify request data buffer handling rq->data is used mostly to pass kernel buffer through request queue without using bio. There are only a couple of places which still do this in kernel and converting to bio isn't difficult. This patch converts ide-cd and atapi to use bio instead of rq->data for request sense and internal pc commands. With previous change to unify sense request handling, this is relatively easily achieved by adding blk_rq_map_kern() during sense_rq prep and PC issue. If blk_rq_map_kern() fails for sense, the error is deferred till sense issue and aborts the failed command which triggered the sense. Note that this is a slim possibility as sense prep is done on each command issue, so for the above condition to actually trigger, all preps since the last sense issue till the issue of the request which would require a sense should fail. * do_request functions might sleep now. This should be okay as ide request_fn - do_ide_request() - is invoked only from make_request and plug work. Make sure this is the case by adding might_sleep() to do_ide_request(). * Functions which access the read sense data before the sense request is complete now should access bio_data(sense_rq->bio) as the sense buffer might have been copied during blk_rq_map_kern(). * ide-tape updated to map sg. * cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC special case. Simplified. * tp_ops->output/input_data path dropped from ide_pc_intr(). Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 52 +++++++++++++++++++++++++++++-------------------- drivers/ide/ide-cd.c | 28 +++++++++++++------------- drivers/ide/ide-io.c | 3 +++ drivers/ide/ide-tape.c | 3 +++ 4 files changed, 51 insertions(+), 35 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 972c522516f..5cefe12f562 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -94,16 +94,18 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq->special = (char *)pc; if (pc->req_xfer) { - rq->data = pc->buf; - rq->data_len = pc->req_xfer; + error = blk_rq_map_kern(drive->queue, rq, pc->buf, pc->req_xfer, + GFP_NOIO); + if (error) + goto put_req; } memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; error = blk_execute_rq(drive->queue, disk, rq, 0); +put_req: blk_put_request(rq); - return error; } EXPORT_SYMBOL_GPL(ide_queue_pc_tail); @@ -168,6 +170,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) struct request_sense *sense = &drive->sense_data; struct request *sense_rq = &drive->sense_rq; unsigned int cmd_len, sense_len; + int err; debug_log("%s: enter\n", __func__); @@ -193,13 +196,19 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) memset(sense, 0, sizeof(*sense)); blk_rq_init(rq->q, sense_rq); - sense_rq->rq_disk = rq->rq_disk; - sense_rq->data = sense; + err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len, + GFP_NOIO); + if (unlikely(err)) { + if (printk_ratelimit()) + printk(KERN_WARNING "%s: failed to map sense buffer\n", + drive->name); + return; + } + + sense_rq->rq_disk = rq->rq_disk; sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; sense_rq->cmd[4] = cmd_len; - sense_rq->data_len = sense_len; - sense_rq->cmd_type = REQ_TYPE_SENSE; sense_rq->cmd_flags |= REQ_PREEMPT; @@ -210,9 +219,14 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) } EXPORT_SYMBOL_GPL(ide_prep_sense); -void ide_queue_sense_rq(ide_drive_t *drive, void *special) +int ide_queue_sense_rq(ide_drive_t *drive, void *special) { - BUG_ON(!drive->sense_rq_armed); + /* deferred failure from ide_prep_sense() */ + if (!drive->sense_rq_armed) { + printk(KERN_WARNING "%s: failed queue sense request\n", + drive->name); + return -ENOMEM; + } drive->sense_rq.special = special; drive->sense_rq_armed = false; @@ -221,6 +235,7 @@ void ide_queue_sense_rq(ide_drive_t *drive, void *special) elv_add_request(drive->queue, &drive->sense_rq, ELEVATOR_INSERT_FRONT, 0); + return 0; } EXPORT_SYMBOL_GPL(ide_queue_sense_rq); @@ -239,13 +254,14 @@ void ide_retry_pc(ide_drive_t *drive) /* init pc from sense_rq */ ide_init_pc(pc); memcpy(pc->c, sense_rq->cmd, 12); - pc->buf = sense_rq->data; + pc->buf = bio_data(sense_rq->bio); /* pointer to mapped address */ pc->req_xfer = sense_rq->data_len; if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_sense_rq(drive, pc); + if (ide_queue_sense_rq(drive, pc)) + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -317,7 +333,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) struct ide_cmd *cmd = &hwif->cmd; struct request *rq = hwif->rq; const struct ide_tp_ops *tp_ops = hwif->tp_ops; - xfer_func_t *xferfunc; unsigned int timeout, done; u16 bcount; u8 stat, ireason, dsc = 0; @@ -411,7 +426,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) rq->errors = -EIO; } - if (drive->media == ide_tape) + if (drive->media == ide_tape && !rq->bio) done = ide_rq_bytes(rq); /* FIXME */ else done = blk_rq_bytes(rq); @@ -448,16 +463,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } - xferfunc = write ? tp_ops->output_data : tp_ops->input_data; - - if (drive->media == ide_floppy && pc->buf == NULL) { + if (drive->media == ide_tape && pc->bh) + done = drive->pc_io_buffers(drive, pc, bcount, write); + else { done = min_t(unsigned int, bcount, cmd->nleft); ide_pio_bytes(drive, cmd, write, done); - } else if (drive->media == ide_tape && pc->bh) { - done = drive->pc_io_buffers(drive, pc, bcount, write); - } else { - done = min_t(unsigned int, bcount, pc->req_xfer - pc->xferred); - xferfunc(drive, NULL, pc->cur_pos, done); } /* Update the current position */ diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 061d7bbcd34..673628790f1 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -210,10 +210,12 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* * For REQ_TYPE_SENSE, "rq->special" points to the original - * failed request + * failed request. Also, the sense data should be read + * directly from rq which might be different from the original + * sense buffer if it got copied during mapping. */ struct request *failed = (struct request *)rq->special; - struct request_sense *sense = &drive->sense_data; + void *sense = bio_data(rq->bio); if (failed) { if (failed->sense) { @@ -398,7 +400,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* if we got a CHECK_CONDITION status, queue a request sense command */ if (stat & ATA_ERR) - ide_queue_sense_rq(drive, NULL); + return ide_queue_sense_rq(drive, NULL) ? 2 : 1; return 1; end_request: @@ -412,8 +414,7 @@ end_request: hwif->rq = NULL; - ide_queue_sense_rq(drive, rq); - return 1; + return ide_queue_sense_rq(drive, rq) ? 2 : 1; } else return 2; } @@ -507,8 +508,12 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, rq->cmd_flags |= cmd_flags; rq->timeout = timeout; if (buffer) { - rq->data = buffer; - rq->data_len = *bufflen; + error = blk_rq_map_kern(drive->queue, rq, buffer, + *bufflen, GFP_NOIO); + if (error) { + blk_put_request(rq); + return error; + } } error = blk_execute_rq(drive->queue, info->disk, rq, 0); @@ -802,15 +807,10 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) drive->dma = 0; /* sg request */ - if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { + if (rq->bio) { struct request_queue *q = drive->queue; + char *buf = bio_data(rq->bio); unsigned int alignment; - char *buf; - - if (rq->bio) - buf = bio_data(rq->bio); - else - buf = rq->data; drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9b9e8b1aae5..3245c2dbda3 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -481,6 +481,9 @@ void do_ide_request(struct request_queue *q) spin_unlock_irq(q->queue_lock); + /* HLD do_request() callback might sleep, make sure it's okay */ + might_sleep(); + if (ide_lock_host(host, hwif)) goto plug_device_2; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8324dfa78a3..9b762a2d5d9 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -850,6 +850,9 @@ out: cmd.rq = rq; + ide_init_sg_cmd(&cmd, pc->req_xfer); + ide_map_sg(drive, &cmd); + return ide_tape_issue_pc(drive, &cmd, pc); } -- cgit v1.2.3-18-g5258 From 765139ef5f1a4b1d5cb1f1a7a12de7ee61f6500f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:43 +0900 Subject: ide-pm: don't abuse rq->data Impact: cleanup rq->data usage ide-pm uses rq->data to carry pointer to struct request_pm_state through request queue and rq->special is used to carray pointer to local struct ide_cmd, which isn't necessary. Use rq->special for request_pm_state instead and use local ide_cmd in ide_start_power_step(). Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 2 +- drivers/ide/ide-pm.c | 38 +++++++++++++++----------------------- 2 files changed, 16 insertions(+), 24 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 3245c2dbda3..6e3094e2277 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -368,7 +368,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) return execute_drive_cmd(drive, rq); else if (blk_pm_request(rq)) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", drive->name, pm->pm_step); diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 0d8a151c0a0..ba1488bd843 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -7,7 +7,6 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - struct ide_cmd cmd; int ret; /* call ACPI _GTM only once */ @@ -15,11 +14,9 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_acpi_get_timing(hwif); memset(&rqpm, 0, sizeof(rqpm)); - memset(&cmd, 0, sizeof(cmd)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_SUSPEND; - rq->special = &cmd; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_SUSPEND; if (mesg.event == PM_EVENT_PRETHAW) mesg.event = PM_EVENT_FREEZE; @@ -41,7 +38,6 @@ int generic_ide_resume(struct device *dev) ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - struct ide_cmd cmd; int err; /* call ACPI _PS0 / _STM only once */ @@ -53,12 +49,10 @@ int generic_ide_resume(struct device *dev) ide_acpi_exec_tfs(drive); memset(&rqpm, 0, sizeof(rqpm)); - memset(&cmd, 0, sizeof(cmd)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_RESUME; rq->cmd_flags |= REQ_PREEMPT; - rq->special = &cmd; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_RESUME; rqpm.pm_state = PM_EVENT_ON; @@ -77,7 +71,7 @@ int generic_ide_resume(struct device *dev) void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk(KERN_INFO "%s: complete_power_step(step: %d)\n", @@ -107,10 +101,8 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq) ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; - struct ide_cmd *cmd = rq->special; - - memset(cmd, 0, sizeof(*cmd)); + struct request_pm_state *pm = rq->special; + struct ide_cmd cmd = { }; switch (pm->pm_step) { case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ @@ -123,12 +115,12 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) - cmd->tf.command = ATA_CMD_FLUSH_EXT; + cmd.tf.command = ATA_CMD_FLUSH_EXT; else - cmd->tf.command = ATA_CMD_FLUSH; + cmd.tf.command = ATA_CMD_FLUSH; goto out_do_tf; case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - cmd->tf.command = ATA_CMD_STANDBYNOW1; + cmd.tf.command = ATA_CMD_STANDBYNOW1; goto out_do_tf; case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ ide_set_max_pio(drive); @@ -141,7 +133,7 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ - cmd->tf.command = ATA_CMD_IDLEIMMEDIATE; + cmd.tf.command = ATA_CMD_IDLEIMMEDIATE; goto out_do_tf; case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ /* @@ -163,11 +155,11 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; out_do_tf: - cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; - cmd->valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; - cmd->protocol = ATA_PROT_NODATA; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.protocol = ATA_PROT_NODATA; - return do_rw_taskfile(drive, cmd); + return do_rw_taskfile(drive, &cmd); } /** @@ -181,7 +173,7 @@ out_do_tf: void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) { struct request_queue *q = drive->queue; - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; unsigned long flags; ide_complete_power_step(drive, rq); @@ -207,7 +199,7 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; if (blk_pm_suspend_request(rq) && pm->pm_step == IDE_PM_START_SUSPEND) -- cgit v1.2.3-18-g5258 From 08f370f0a2fb223bf48d0bfa2a173be0393c19dc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape,floppy: fix failed command completion after request sense Impact: fix infinite retry loop After a command failed, ide-tape and floppy inserts REQUEST_SENSE in front of the failed command and according to the result, sets pc->retries, flags and errors. After REQUEST_SENSE is complete, the failed command is again at the front of the queue and if the verdict was to terminate the request, the issue functions tries to complete it directly by calling drive->pc_callback() and returning ide_stopped. However, drive->pc_callback() doesn't complete a request. It only prepares for completion of the request. As a result, this creates an infinite loop where the failed request is retried perpetually. Fix it by actually ending the request by calling ide_complete_rq(). Signed-off-by: Tejun Heo --- drivers/ide/ide-floppy.c | 1 + drivers/ide/ide-tape.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d3302cc891e..d20704ac318 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -141,6 +141,7 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 9b762a2d5d9..2b9a13671c5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -643,6 +643,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, } drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); -- cgit v1.2.3-18-g5258 From eb6a61bb9543aa54d62595e27206b3d3c0293bcc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len Impact: allow residual count implementation in ->pc_callback() rq->data_len has two duties - carrying the number of input bytes on issue and carrying residual count back to the issuer on completion. ide-atapi completion callback ->pc_callback() is the right place to do this but currently ide-atapi depends on rq->data_len carrying the original request size after calling ->pc_callback() to complete the pc request. This patch makes ide_pc_intr(), ide_tape_issue_pc() and ide_floppy_issue_pc() cache length to complete before calling ->pc_callback() so that it can modify rq->data_len as necessary. Note: As using rq->data_len for two purposes can make cases like this incorrect in subtle ways, future changes will introduce separate field for residual count. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 16 ++++++++++------ drivers/ide/ide-floppy.c | 5 ++++- drivers/ide/ide-tape.c | 5 ++++- 3 files changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 5cefe12f562..3df5442de71 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -409,6 +409,16 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) dsc = 1; + /* + * ->pc_callback() might change rq->data_len for + * residual count, cache total length. + */ + if (!blk_special_request(rq) && + (drive->media == ide_tape && !rq->bio)) + done = ide_rq_bytes(rq); /* FIXME */ + else + done = blk_rq_bytes(rq); + /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); @@ -417,7 +427,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if (blk_special_request(rq)) { rq->errors = 0; - done = blk_rq_bytes(rq); error = 0; } else { @@ -426,11 +435,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) rq->errors = -EIO; } - if (drive->media == ide_tape && !rq->bio) - done = ide_rq_bytes(rq); /* FIXME */ - else - done = blk_rq_bytes(rq); - error = uptodate ? 0 : -EIO; } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d20704ac318..537b7c55803 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -134,14 +134,17 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, drive->pc = pc; if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) ide_floppy_report_error(floppy, pc); + /* Giving up */ pc->error = IDE_DRV_ERROR_GENERAL; drive->failed_pc = NULL; drive->pc_callback(drive, 0); - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2b9a13671c5..8226d52504d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -622,6 +622,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FLAG_ABORT)) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + /* * We will "abort" retrying a packet command in case legitimate * error code was received (crossing a filemark, or end of the @@ -641,9 +643,10 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, /* Giving up */ pc->error = IDE_DRV_ERROR_GENERAL; } + drive->failed_pc = NULL; drive->pc_callback(drive, 0); - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); -- cgit v1.2.3-18-g5258 From 7b13354eeaabaf6283b8c669a7d67d104ce7c638 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: use single continuous buffer Impact: simpler buffer allocation and handling, kills OOM, fix DMA transfers ide-tape has its own multiple buffer mechanism using struct idetape_bh. It allocates buffer with decreasing order-of-two allocations so that it results in minimum number of segments. However, the implementation is quite complex and works in a way that no other block or ide driver works necessitating a lot of special case handling. The benefit this complex allocation scheme brings is questionable as PIO or DMA the number of segments (16 maximum) doesn't make any noticeable difference and it also doesn't negate the need for multiple order allocation which can fail under memory pressure or high fragmentation although it does lower the highest order necessary by one when the buffer size isn't power of two. As the first step to remove the custom buffer management, this patch makes ide-tape allocate single continous buffer. The maximum order is four. I doubt the change would cause any trouble but if it ever matters, it should be converted to regular sg mechanism like everyone else and even in that case dropping custom buffer handling and moving to standard mechanism first make sense as an intermediate step. This patch makes the first bh to contain the whole buffer and drops multi bh handling code. Following patches will make further changes. This patch has the side effect of killing OOM triggered by allocation path and fixing DMA transfers. Previously, bug in alloc path triggered OOM on command issue and commands were passed to DMA engine without DMA-mapping all the segments. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 256 +++++++++++-------------------------------------- 1 file changed, 58 insertions(+), 198 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8226d52504d..b2afbc7bcb6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -134,7 +134,6 @@ enum { struct idetape_bh { u32 b_size; atomic_t b_count; - struct idetape_bh *b_reqnext; char *b_data; }; @@ -228,10 +227,6 @@ typedef struct ide_tape_obj { char *b_data; int b_count; - int pages_per_buffer; - /* Wasted space in each stage */ - int excess_bh_size; - /* Measures average tape speed */ unsigned long avg_time; int avg_size; @@ -303,9 +298,7 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, struct idetape_bh *bh = pc->bh; int count; - while (bcount) { - if (bh == NULL) - break; + if (bcount && bh) { count = min( (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); @@ -313,15 +306,10 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, atomic_read(&bh->b_count), count); bcount -= count; atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } + if (atomic_read(&bh->b_count) == bh->b_size) + pc->bh = NULL; } - pc->bh = bh; - return bcount; } @@ -331,22 +319,14 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, struct idetape_bh *bh = pc->bh; int count; - while (bcount) { - if (bh == NULL) - break; + if (bcount && bh) { count = min((unsigned int)pc->b_count, (unsigned int)bcount); drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); bcount -= count; pc->b_data += count; pc->b_count -= count; - if (!pc->b_count) { - bh = bh->b_reqnext; - pc->bh = bh; - if (bh) { - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); - } - } + if (!pc->b_count) + pc->bh = NULL; } return bcount; @@ -355,24 +335,20 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct idetape_bh *bh = pc->bh; - int count; unsigned int bcount = pc->xferred; if (pc->flags & PC_FLAG_WRITING) return; - while (bcount) { - if (bh == NULL) { + if (bcount) { + if (bh == NULL || bcount > bh->b_size) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return; } - count = min((unsigned int)bh->b_size, (unsigned int)bcount); - atomic_set(&bh->b_count, count); + atomic_set(&bh->b_count, bcount); if (atomic_read(&bh->b_count) == bh->b_size) - bh = bh->b_reqnext; - bcount -= count; + pc->bh = NULL; } - pc->bh = bh; } /* @@ -439,24 +415,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) /* Free data buffers completely. */ static void ide_tape_kfree_buffer(idetape_tape_t *tape) { - struct idetape_bh *prev_bh, *bh = tape->merge_bh; - - while (bh) { - u32 size = bh->b_size; - - while (size) { - unsigned int order = fls(size >> PAGE_SHIFT)-1; - - if (bh->b_data) - free_pages((unsigned long)bh->b_data, order); + struct idetape_bh *bh = tape->merge_bh; - size &= (order-1); - bh->b_data += (1 << order) * PAGE_SIZE; - } - prev_bh = bh; - bh = bh->b_reqnext; - kfree(prev_bh); - } + kfree(bh->b_data); + kfree(bh); } static void ide_tape_handle_dsc(ide_drive_t *); @@ -861,117 +823,50 @@ out: } /* - * The function below uses __get_free_pages to allocate a data buffer of size - * tape->buffer_size (or a bit more). We attempt to combine sequential pages as - * much as possible. - * - * It returns a pointer to the newly allocated buffer, or NULL in case of - * failure. + * It returns a pointer to the newly allocated buffer, or NULL in case + * of failure. */ static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full, int clear) -{ - struct idetape_bh *prev_bh, *bh, *merge_bh; - int pages = tape->pages_per_buffer; - unsigned int order, b_allocd; - char *b_data = NULL; - - merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - bh = merge_bh; - if (bh == NULL) - goto abort; - - order = fls(pages) - 1; - bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!bh->b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - pages &= (order-1); - - if (clear) - memset(bh->b_data, 0, b_allocd); - bh->b_reqnext = NULL; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); + int full) +{ + struct idetape_bh *bh; - while (pages) { - order = fls(pages) - 1; - b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - - if (clear) - memset(b_data, 0, b_allocd); - - /* newly allocated page frames below buffer header or ...*/ - if (bh->b_data == b_data + b_allocd) { - bh->b_size += b_allocd; - bh->b_data -= b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - /* they are above the header */ - if (b_data == bh->b_data + bh->b_size) { - bh->b_size += b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - prev_bh = bh; - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) { - free_pages((unsigned long) b_data, order); - goto abort; - } - bh->b_reqnext = NULL; - bh->b_data = b_data; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - prev_bh->b_reqnext = bh; + bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + if (!bh) + return NULL; - pages &= (order-1); + bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!bh->b_data) { + kfree(bh); + return NULL; } - bh->b_size -= tape->excess_bh_size; - if (full) - atomic_sub(tape->excess_bh_size, &bh->b_count); - return merge_bh; -abort: - ide_tape_kfree_buffer(tape); - return NULL; + bh->b_size = tape->buffer_size; + atomic_set(&bh->b_count, full ? bh->b_size : 0); + + return bh; } static int idetape_copy_stage_from_user(idetape_tape_t *tape, const char __user *buf, int n) { struct idetape_bh *bh = tape->bh; - int count; int ret = 0; - while (n) { - if (bh == NULL) { + if (n) { + if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return 1; } - count = min((unsigned int) - (bh->b_size - atomic_read(&bh->b_count)), - (unsigned int)n); if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - count)) + n)) ret = 1; - n -= count; - atomic_add(count, &bh->b_count); - buf += count; - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } + atomic_add(n, &bh->b_count); + if (atomic_read(&bh->b_count) == bh->b_size) + tape->bh = NULL; } - tape->bh = bh; + return ret; } @@ -979,30 +874,20 @@ static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, int n) { struct idetape_bh *bh = tape->bh; - int count; int ret = 0; - while (n) { - if (bh == NULL) { + if (n) { + if (bh == NULL || n > tape->b_count) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return 1; } - count = min(tape->b_count, n); - if (copy_to_user(buf, tape->b_data, count)) + if (copy_to_user(buf, tape->b_data, n)) ret = 1; - n -= count; - tape->b_data += count; - tape->b_count -= count; - buf += count; - if (!tape->b_count) { - bh = bh->b_reqnext; - tape->bh = bh; - if (bh) { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } - } + tape->b_data += n; + tape->b_count -= n; + if (!tape->b_count) + tape->bh = NULL; } return ret; } @@ -1254,7 +1139,7 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks, min; + int blocks; struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { @@ -1269,31 +1154,16 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) if (tape->merge_bh_size) { blocks = tape->merge_bh_size / tape->blk_size; if (tape->merge_bh_size % tape->blk_size) { - unsigned int i; - + unsigned int i = tape->blk_size - + tape->merge_bh_size % tape->blk_size; blocks++; - i = tape->blk_size - tape->merge_bh_size % - tape->blk_size; - bh = tape->bh->b_reqnext; - while (bh) { - atomic_set(&bh->b_count, 0); - bh = bh->b_reqnext; - } bh = tape->bh; - while (i) { - if (bh == NULL) { - printk(KERN_INFO "ide-tape: bug," - " bh NULL\n"); - break; - } - min = min(i, (unsigned int)(bh->b_size - - atomic_read(&bh->b_count))); + if (bh) { memset(bh->b_data + atomic_read(&bh->b_count), - 0, min); - atomic_add(min, &bh->b_count); - i -= min; - bh = bh->b_reqnext; - } + 0, i); + atomic_add(i, &bh->b_count); + } else + printk(KERN_INFO "ide-tape: bug, bh NULL\n"); } (void) idetape_add_chrdev_write_request(drive, blocks); tape->merge_bh_size = 0; @@ -1321,7 +1191,7 @@ static int idetape_init_read(ide_drive_t *drive) " 0 now\n"); tape->merge_bh_size = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; @@ -1368,23 +1238,18 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh; + struct idetape_bh *bh = tape->merge_bh; int blocks; while (bcount) { unsigned int count; - bh = tape->merge_bh; count = min(tape->buffer_size, bcount); bcount -= count; blocks = count / tape->blk_size; - while (count) { - atomic_set(&bh->b_count, - min(count, (unsigned int)bh->b_size)); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - count -= atomic_read(&bh->b_count); - bh = bh->b_reqnext; - } + atomic_set(&bh->b_count, count); + memset(bh->b_data, 0, atomic_read(&bh->b_count)); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_bh); } @@ -1596,7 +1461,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, "should be 0 now\n"); tape->merge_bh_size = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; @@ -1970,7 +1835,7 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1); if (tape->merge_bh != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); @@ -2201,11 +2066,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->buffer_size = *ctl * tape->blk_size; } buffer_size = tape->buffer_size; - tape->pages_per_buffer = buffer_size / PAGE_SIZE; - if (buffer_size % PAGE_SIZE) { - tape->pages_per_buffer++; - tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE; - } /* select the "best" DSC read/write polling freq */ speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); -- cgit v1.2.3-18-g5258 From e998f30b45efb99a3c3ce7b5483f76317a17abed Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: use standard data transfer mechanism Impact: use standard way to transfer data ide-tape uses rq in an interesting way. For r/w requests, rq->special is used to carry a private buffer management structure idetape_bh and rq->nr_sectors and current_nr_sectors are initialized to the number of idetape blocks which isn't necessary 512 bytes. Also, rq->current_nr_sectors is used to report back the residual count in units of idetape blocks. This peculiarity taxes both block layer and ide. ide-atapi has different paths and hooks to accomodate it and what a rq means becomes quite confusing and making changes at the block layer becomes quite difficult and error-prone. This patch makes ide-tape use bio instead. With the previous patch, ide-tape currently is using single contiguos buffer so replacing it isn't difficult. Data buffer is mapped into bio using blk_rq_map_kern() in idetape_queue_rw_tail(). idetape_io_buffers() and idetape_update_buffers() are dropped and pc->bh is set to null to tell ide-atapi to use standard data transfer mechanism and idetape_bh byte counts are updated by the issuer on completion using the residual count. This change also nicely removes the FIXME in ide_pc_intr() where ide-tape rqs need to be completed using ide_rq_bytes() instead of blk_rq_bytes() (although this didn't really matter as the request didn't have bio). Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 6 +-- drivers/ide/ide-tape.c | 112 ++++++++++-------------------------------------- 2 files changed, 24 insertions(+), 94 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 3df5442de71..b9dd4503cbc 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -413,11 +413,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) * ->pc_callback() might change rq->data_len for * residual count, cache total length. */ - if (!blk_special_request(rq) && - (drive->media == ide_tape && !rq->bio)) - done = ide_rq_bytes(rq); /* FIXME */ - else - done = blk_rq_bytes(rq); + done = blk_rq_bytes(rq); /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b2afbc7bcb6..b373ac87635 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -292,65 +292,6 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) return tape; } -static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - if (bcount && bh) { - count = min( - (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), - bcount); - drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data + - atomic_read(&bh->b_count), count); - bcount -= count; - atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) - pc->bh = NULL; - } - - return bcount; -} - -static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - if (bcount && bh) { - count = min((unsigned int)pc->b_count, (unsigned int)bcount); - drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); - bcount -= count; - pc->b_data += count; - pc->b_count -= count; - if (!pc->b_count) - pc->bh = NULL; - } - - return bcount; -} - -static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - struct idetape_bh *bh = pc->bh; - unsigned int bcount = pc->xferred; - - if (pc->flags & PC_FLAG_WRITING) - return; - if (bcount) { - if (bh == NULL || bcount > bh->b_size) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return; - } - atomic_set(&bh->b_count, bcount); - if (atomic_read(&bh->b_count) == bh->b_size) - pc->bh = NULL; - } -} - /* * called on each failed packet command retry to analyze the request sense. We * currently do not utilize this information. @@ -368,12 +309,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) pc->c[0], tape->sense_key, tape->asc, tape->ascq); /* Correct pc->xferred by asking the tape. */ - if (pc->flags & PC_FLAG_DMA_ERROR) { + if (pc->flags & PC_FLAG_DMA_ERROR) pc->xferred = pc->req_xfer - tape->blk_size * get_unaligned_be32(&sense[3]); - idetape_update_buffers(drive, pc); - } /* * If error was the result of a zero-length read or write command, @@ -458,7 +397,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->current_nr_sectors -= blocks; + rq->data_len -= blocks * tape->blk_size; if (pc->error) { uptodate = 0; @@ -520,19 +459,6 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) idetape_postpone_request(drive); } -static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int write) -{ - unsigned int bleft; - - if (write) - bleft = idetape_output_buffers(drive, pc, bcount); - else - bleft = idetape_input_buffers(drive, pc, bcount); - - return bcount - bleft; -} - /* * Packet Command Interface * @@ -683,7 +609,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = bh; + pc->bh = NULL; pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; @@ -1063,10 +989,12 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) { idetape_tape_t *tape = drive->driver_data; + size_t size = blocks * tape->blk_size; struct request *rq; - int ret, errors; + int ret; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); + BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; @@ -1074,21 +1002,29 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, rq->rq_disk = tape->disk; rq->special = (void *)bh; rq->sector = tape->first_frame; - rq->nr_sectors = blocks; - rq->current_nr_sectors = blocks; + + if (size) { + ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size, + __GFP_WAIT); + if (ret) + goto out_put; + } + blk_execute_rq(drive->queue, tape->disk, rq, 0); - errors = rq->errors; - ret = tape->blk_size * (blocks - rq->current_nr_sectors); - blk_put_request(rq); + /* calculate the number of transferred bytes and update bh */ + size -= rq->data_len; + if (cmd == REQ_IDETAPE_READ) + atomic_add(size, &bh->b_count); - if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) - return 0; + ret = size; + if (rq->errors == IDE_DRV_ERROR_GENERAL) + ret = -EIO; if (tape->merge_bh) idetape_init_merge_buffer(tape); - if (errors == IDE_DRV_ERROR_GENERAL) - return -EIO; +out_put: + blk_put_request(rq); return ret; } @@ -2034,8 +1970,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) u16 *ctl = (u16 *)&tape->caps[12]; drive->pc_callback = ide_tape_callback; - drive->pc_update_buffers = idetape_update_buffers; - drive->pc_io_buffers = ide_tape_io_buffers; drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; -- cgit v1.2.3-18-g5258 From 6cf3d545f7d71b183e5b89960d4cc850a42c410d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: kill idetape_bh Impact: kill now unnecessary idetape_bh With everything using standard mechanisms, there is no need for idetape_bh anymore. Kill it and use tape->buf, cur and valid to describe data buffer instead. Changes worth mentioning are... * idetape_queue_rq_tail() now always queue tape->buf and and adjusts buffer state properly before completion. * idetape_pad_zeros() clears the buffer only once. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 305 ++++++++++++++----------------------------------- 1 file changed, 84 insertions(+), 221 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b373ac87635..d2e9c09b521 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -131,12 +131,6 @@ enum { IDETAPE_DIR_WRITE = (1 << 2), }; -struct idetape_bh { - u32 b_size; - atomic_t b_count; - char *b_data; -}; - /* Tape door status */ #define DOOR_UNLOCKED 0 #define DOOR_LOCKED 1 @@ -218,14 +212,12 @@ typedef struct ide_tape_obj { /* Data buffer size chosen based on the tape's recommendation */ int buffer_size; - /* merge buffer */ - struct idetape_bh *merge_bh; - /* size of the merge buffer */ - int merge_bh_size; - /* pointer to current buffer head within the merge buffer */ - struct idetape_bh *bh; - char *b_data; - int b_count; + /* Staging buffer of buffer_size bytes */ + void *buf; + /* The read/write cursor */ + void *cur; + /* The number of valid bytes in buf */ + size_t valid; /* Measures average tape speed */ unsigned long avg_time; @@ -351,15 +343,6 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) } } -/* Free data buffers completely. */ -static void ide_tape_kfree_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - - kfree(bh->b_data); - kfree(bh); -} - static void ide_tape_handle_dsc(ide_drive_t *); static int ide_tape_callback(ide_drive_t *drive, int dsc) @@ -603,8 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, struct request *rq, u8 opcode) { - struct idetape_bh *bh = (struct idetape_bh *)rq->special; - unsigned int length = rq->current_nr_sectors; + unsigned int length = rq->nr_sectors; ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); @@ -616,14 +598,11 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, if (pc->req_xfer == tape->buffer_size) pc->flags |= PC_FLAG_DMA_OK; - if (opcode == READ_6) { + if (opcode == READ_6) pc->c[0] = READ_6; - atomic_set(&bh->b_count, 0); - } else if (opcode == WRITE_6) { + else if (opcode == WRITE_6) { pc->c[0] = WRITE_6; pc->flags |= PC_FLAG_WRITING; - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); } memcpy(rq->cmd, pc->c, 12); @@ -639,10 +618,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu," - " current_nr_sectors: %u\n", - (unsigned long long)rq->sector, rq->nr_sectors, - rq->current_nr_sectors); + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n" + (unsigned long long)rq->sector, rq->nr_sectors); if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ @@ -748,89 +725,6 @@ out: return ide_tape_issue_pc(drive, &cmd, pc); } -/* - * It returns a pointer to the newly allocated buffer, or NULL in case - * of failure. - */ -static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full) -{ - struct idetape_bh *bh; - - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) - return NULL; - - bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!bh->b_data) { - kfree(bh); - return NULL; - } - - bh->b_size = tape->buffer_size; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - - return bh; -} - -static int idetape_copy_stage_from_user(idetape_tape_t *tape, - const char __user *buf, int n) -{ - struct idetape_bh *bh = tape->bh; - int ret = 0; - - if (n) { - if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - n)) - ret = 1; - atomic_add(n, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) - tape->bh = NULL; - } - - return ret; -} - -static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, - int n) -{ - struct idetape_bh *bh = tape->bh; - int ret = 0; - - if (n) { - if (bh == NULL || n > tape->b_count) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - if (copy_to_user(buf, tape->b_data, n)) - ret = 1; - tape->b_data += n; - tape->b_count -= n; - if (!tape->b_count) - tape->bh = NULL; - } - return ret; -} - -static void idetape_init_merge_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - tape->bh = tape->merge_bh; - - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) - atomic_set(&bh->b_count, 0); - else { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } -} - /* * Write a filemark if write_filemark=1. Flush the device buffers without * writing a filemark otherwise. @@ -928,10 +822,10 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive) return; clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags); - tape->merge_bh_size = 0; - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + tape->valid = 0; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; @@ -985,8 +879,7 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, - struct idetape_bh *bh) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks) { idetape_tape_t *tape = drive->driver_data; size_t size = blocks * tape->blk_size; @@ -1000,11 +893,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd[13] = cmd; rq->rq_disk = tape->disk; - rq->special = (void *)bh; rq->sector = tape->first_frame; if (size) { - ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size, + ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size, __GFP_WAIT); if (ret) goto out_put; @@ -1012,17 +904,17 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, blk_execute_rq(drive->queue, tape->disk, rq, 0); - /* calculate the number of transferred bytes and update bh */ + /* calculate the number of transferred bytes and update buffer state */ size -= rq->data_len; + tape->cur = tape->buf; if (cmd == REQ_IDETAPE_READ) - atomic_add(size, &bh->b_count); + tape->valid = size; + else + tape->valid = 0; ret = size; if (rq->errors == IDE_DRV_ERROR_GENERAL) ret = -EIO; - - if (tape->merge_bh) - idetape_init_merge_buffer(tape); out_put: blk_put_request(rq); return ret; @@ -1064,49 +956,33 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) /* Queue up a character device originated write request. */ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) { - idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - blocks, tape->merge_bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks); } static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; int blocks; - struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" " but we are not writing.\n"); return; } - if (tape->merge_bh_size > tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n"); - tape->merge_bh_size = tape->buffer_size; - } - if (tape->merge_bh_size) { - blocks = tape->merge_bh_size / tape->blk_size; - if (tape->merge_bh_size % tape->blk_size) { - unsigned int i = tape->blk_size - - tape->merge_bh_size % tape->blk_size; + if (tape->buf) { + blocks = tape->valid / tape->blk_size; + if (tape->valid % tape->blk_size) { blocks++; - bh = tape->bh; - if (bh) { - memset(bh->b_data + atomic_read(&bh->b_count), - 0, i); - atomic_add(i, &bh->b_count); - } else - printk(KERN_INFO "ide-tape: bug, bh NULL\n"); + memset(tape->buf + tape->valid, 0, + tape->blk_size - tape->valid % tape->blk_size); } (void) idetape_add_chrdev_write_request(drive, blocks); - tape->merge_bh_size = 0; } - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; } @@ -1122,15 +998,15 @@ static int idetape_init_read(ide_drive_t *drive) ide_tape_flush_merge_buffer(drive); idetape_flush_tape_buffers(drive); } - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size should be" - " 0 now\n"); - tape->merge_bh_size = 0; + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); - if (!tape->merge_bh) + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; + tape->cur = tape->buf; /* * Issue a read 0 command to ensure that DSC handshake is @@ -1140,11 +1016,10 @@ static int idetape_init_read(ide_drive_t *drive) */ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0, - tape->merge_bh); + REQ_IDETAPE_READ, 0); if (bytes_read < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return bytes_read; } @@ -1157,8 +1032,6 @@ static int idetape_init_read(ide_drive_t *drive) /* called from idetape_chrdev_read() to service a chrdev read request. */ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) { - idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); /* If we are at a filemark, return a read length of 0 */ @@ -1167,27 +1040,21 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) idetape_init_read(drive); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, - tape->merge_bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh = tape->merge_bh; - int blocks; + + memset(tape->buf, 0, tape->buffer_size); while (bcount) { - unsigned int count; + unsigned int count = min(tape->buffer_size, bcount); - count = min(tape->buffer_size, bcount); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + count / tape->blk_size); bcount -= count; - blocks = count / tape->blk_size; - atomic_set(&bh->b_count, count); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, - tape->merge_bh); } } @@ -1267,7 +1134,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, } if (tape->chrdev_dir == IDETAPE_DIR_READ) { - tape->merge_bh_size = 0; + tape->valid = 0; if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) ++count; ide_tape_discard_merge_buffer(drive, 0); @@ -1333,20 +1200,20 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, return rc; if (count == 0) return (0); - if (tape->merge_bh_size) { - actually_read = min((unsigned int)(tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, actually_read)) + if (tape->valid) { + actually_read = min_t(unsigned int, tape->valid, count); + if (copy_to_user(buf, tape->cur, actually_read)) ret = -EFAULT; buf += actually_read; - tape->merge_bh_size -= actually_read; count -= actually_read; + tape->cur += actually_read; + tape->valid -= actually_read; } while (count >= tape->buffer_size) { bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; - if (idetape_copy_stage_to_user(tape, buf, bytes_read)) + if (copy_to_user(buf, tape->cur, bytes_read)) ret = -EFAULT; buf += bytes_read; count -= bytes_read; @@ -1357,10 +1224,11 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, temp)) + if (copy_to_user(buf, tape->cur, temp)) ret = -EFAULT; actually_read += temp; - tape->merge_bh_size = bytes_read-temp; + tape->cur += temp; + tape->valid -= temp; } finish: if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { @@ -1392,16 +1260,15 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { if (tape->chrdev_dir == IDETAPE_DIR_READ) ide_tape_discard_merge_buffer(drive, 1); - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size " - "should be 0 now\n"); - tape->merge_bh_size = 0; + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); - if (!tape->merge_bh) + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; - idetape_init_merge_buffer(tape); + tape->cur = tape->buf; /* * Issue a write 0 command to ensure that DSC handshake is @@ -1411,11 +1278,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, */ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0, - tape->merge_bh); + REQ_IDETAPE_WRITE, 0); if (retval < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return retval; } @@ -1423,23 +1289,19 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count == 0) return (0); - if (tape->merge_bh_size) { - if (tape->merge_bh_size >= tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); - tape->merge_bh_size = 0; - } - actually_written = min((unsigned int) - (tape->buffer_size - tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_from_user(tape, buf, actually_written)) - ret = -EFAULT; + if (tape->valid < tape->buffer_size) { + actually_written = min_t(unsigned int, + tape->buffer_size - tape->valid, + count); + if (copy_from_user(tape->cur, buf, actually_written)) + ret = -EFAULT; buf += actually_written; - tape->merge_bh_size += actually_written; count -= actually_written; + tape->cur += actually_written; + tape->valid += actually_written; - if (tape->merge_bh_size == tape->buffer_size) { + if (tape->valid == tape->buffer_size) { ssize_t retval; - tape->merge_bh_size = 0; retval = idetape_add_chrdev_write_request(drive, ctl); if (retval <= 0) return (retval); @@ -1447,7 +1309,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } while (count >= tape->buffer_size) { ssize_t retval; - if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size)) + if (copy_from_user(tape->cur, buf, tape->buffer_size)) ret = -EFAULT; buf += tape->buffer_size; count -= tape->buffer_size; @@ -1458,9 +1320,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count) { actually_written += count; - if (idetape_copy_stage_from_user(tape, buf, count)) + if (copy_from_user(tape->cur, buf, count)) ret = -EFAULT; - tape->merge_bh_size += count; + tape->cur += count; + tape->valid += count; } return ret ? ret : actually_written; } @@ -1623,7 +1486,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = tape->merge_bh_size / + block_offset = tape->valid / (tape->blk_size * tape->user_bs_factor); position = idetape_read_position(drive); if (position < 0) @@ -1771,12 +1634,12 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1); - if (tape->merge_bh != NULL) { + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (tape->buf != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; } idetape_write_filemark(drive); idetape_flush_tape_buffers(drive); @@ -2042,7 +1905,7 @@ static void ide_tape_release(struct device *dev) ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; - BUG_ON(tape->merge_bh_size); + BUG_ON(tape->valid); drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; drive->driver_data = NULL; -- cgit v1.2.3-18-g5258 From 3596b66452491a3cff26256a5e6e6061a66c4142 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: unify r/w init paths Impact: cleanup Read and write init paths are almost identical. Unify them into idetape_init_rw(). Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 110 +++++++++++++++++++++---------------------------- 1 file changed, 46 insertions(+), 64 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d2e9c09b521..4da7fa9bca1 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -987,42 +987,50 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) tape->chrdev_dir = IDETAPE_DIR_NONE; } -static int idetape_init_read(ide_drive_t *drive) +static int idetape_init_rw(ide_drive_t *drive, int dir) { idetape_tape_t *tape = drive->driver_data; - int bytes_read; + int rc; - /* Initialize read operation */ - if (tape->chrdev_dir != IDETAPE_DIR_READ) { - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { - ide_tape_flush_merge_buffer(drive); - idetape_flush_tape_buffers(drive); - } - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_READ; - tape->cur = tape->buf; + BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE); - /* - * Issue a read 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. - * No point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0); - if (bytes_read < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return bytes_read; - } + if (tape->chrdev_dir == dir) + return 0; + + if (tape->chrdev_dir == IDETAPE_DIR_READ) + ide_tape_discard_merge_buffer(drive, 1); + else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { + ide_tape_flush_merge_buffer(drive); + idetape_flush_tape_buffers(drive); + } + + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; + } + + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) + return -ENOMEM; + tape->chrdev_dir = dir; + tape->cur = tape->buf; + + /* + * Issue a 0 rw command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. No + * point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. + */ + if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { + int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ + : REQ_IDETAPE_WRITE; + + rc = idetape_queue_rw_tail(drive, cmd, 0); + if (rc < 0) { + kfree(tape->buf); + tape->buf = NULL; + tape->chrdev_dir = IDETAPE_DIR_NONE; + return rc; } } @@ -1038,7 +1046,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) return 0; - idetape_init_read(drive); + idetape_init_rw(drive, IDETAPE_DIR_READ); return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } @@ -1195,7 +1203,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - rc = idetape_init_read(drive); + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; if (count == 0) @@ -1249,6 +1257,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ssize_t actually_written = 0; ssize_t ret = 0; u16 ctl = *(u16 *)&tape->caps[12]; + int rc; /* The drive is write protected. */ if (tape->write_prot) @@ -1257,36 +1266,9 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); /* Initialize write operation */ - if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { - if (tape->chrdev_dir == IDETAPE_DIR_READ) - ide_tape_discard_merge_buffer(drive, 1); - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_WRITE; - tape->cur = tape->buf; - - /* - * Issue a write 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. No - * point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0); - if (retval < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return retval; - } - } - } + rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); + if (rc < 0) + return rc; if (count == 0) return (0); if (tape->valid < tape->buffer_size) { -- cgit v1.2.3-18-g5258 From 71294cf93d22ceaa75448cc6ebee2c65897be8c2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-tape: use byte size instead of sectors on rw issue functions Impact: cleanup Byte size is what most issue functions deal with, make idetape_queue_rw_tail() and its wrappers take byte size instead of sector counts. idetape_chrdev_read() and write() functions are converted to use tape->buffer_size instead of ctl from tape->cap. This cleans up code a little bit and will ease the next r/w reimplementation. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 45 ++++++++++++++++++++------------------------- 1 file changed, 20 insertions(+), 25 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 4da7fa9bca1..d5e9bb286e3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -879,15 +879,15 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) { idetape_tape_t *tape = drive->driver_data; - size_t size = blocks * tape->blk_size; struct request *rq; int ret; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); + BUG_ON(size < 0 || size % tape->blk_size); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; @@ -954,17 +954,16 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) } /* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size) { debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size); } static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" @@ -972,15 +971,10 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) return; } if (tape->buf) { - blocks = tape->valid / tape->blk_size; - if (tape->valid % tape->blk_size) { - blocks++; - memset(tape->buf + tape->valid, 0, - tape->blk_size - tape->valid % tape->blk_size); - } - (void) idetape_add_chrdev_write_request(drive, blocks); - } - if (tape->buf != NULL) { + size_t aligned = roundup(tape->valid, tape->blk_size); + + memset(tape->cur, 0, aligned - tape->valid); + idetape_add_chrdev_write_request(drive, aligned); kfree(tape->buf); tape->buf = NULL; } @@ -1038,9 +1032,9 @@ static int idetape_init_rw(ide_drive_t *drive, int dir) } /* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size) { - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); + debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size); /* If we are at a filemark, return a read length of 0 */ if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) @@ -1048,7 +1042,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) idetape_init_rw(drive, IDETAPE_DIR_READ); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) @@ -1060,8 +1054,7 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount) while (bcount) { unsigned int count = min(tape->buffer_size, bcount); - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - count / tape->blk_size); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count); bcount -= count; } } @@ -1193,7 +1186,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, ide_drive_t *drive = tape->drive; ssize_t bytes_read, temp, actually_read = 0, rc; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); @@ -1218,7 +1210,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, tape->valid -= actually_read; } while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); + bytes_read = idetape_add_chrdev_read_request(drive, + tape->buffer_size); if (bytes_read <= 0) goto finish; if (copy_to_user(buf, tape->cur, bytes_read)) @@ -1228,7 +1221,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, actually_read += bytes_read; } if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); + bytes_read = idetape_add_chrdev_read_request(drive, + tape->buffer_size); if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); @@ -1256,7 +1250,6 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ide_drive_t *drive = tape->drive; ssize_t actually_written = 0; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; int rc; /* The drive is write protected. */ @@ -1284,7 +1277,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->valid == tape->buffer_size) { ssize_t retval; - retval = idetape_add_chrdev_write_request(drive, ctl); + retval = idetape_add_chrdev_write_request(drive, + tape->buffer_size); if (retval <= 0) return (retval); } @@ -1295,7 +1289,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ret = -EFAULT; buf += tape->buffer_size; count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, ctl); + retval = idetape_add_chrdev_write_request(drive, + tape->buffer_size); actually_written += tape->buffer_size; if (retval <= 0) return (retval); -- cgit v1.2.3-18-g5258 From 4344d07fb8dbf0cbfec1f7d7c1afeccaceaaa120 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-tape: simplify read/write functions Impact: cleanup idetape_chrdev_read/write() functions are unnecessarily complex when everything can be handled in a single loop. Collapse idetape_add_chrdev_read/write_request() into the rw functions and simplify the implementation. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 149 +++++++++++++++++-------------------------------- 1 file changed, 50 insertions(+), 99 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d5e9bb286e3..2599579e417 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -953,14 +953,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) pc->flags |= PC_FLAG_WAIT_FOR_DSC; } -/* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size) -{ - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size); -} - static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -974,7 +966,7 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) size_t aligned = roundup(tape->valid, tape->blk_size); memset(tape->cur, 0, aligned - tape->valid); - idetape_add_chrdev_write_request(drive, aligned); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned); kfree(tape->buf); tape->buf = NULL; } @@ -1031,20 +1023,6 @@ static int idetape_init_rw(ide_drive_t *drive, int dir) return 0; } -/* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size) -{ - debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size); - - /* If we are at a filemark, return a read length of 0 */ - if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) - return 0; - - idetape_init_rw(drive, IDETAPE_DIR_READ); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size); -} - static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; @@ -1184,8 +1162,9 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t bytes_read, temp, actually_read = 0, rc; + size_t done = 0; ssize_t ret = 0; + int rc; debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); @@ -1195,52 +1174,43 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->valid) { - actually_read = min_t(unsigned int, tape->valid, count); - if (copy_to_user(buf, tape->cur, actually_read)) - ret = -EFAULT; - buf += actually_read; - count -= actually_read; - tape->cur += actually_read; - tape->valid -= actually_read; - } - while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, - tape->buffer_size); - if (bytes_read <= 0) - goto finish; - if (copy_to_user(buf, tape->cur, bytes_read)) - ret = -EFAULT; - buf += bytes_read; - count -= bytes_read; - actually_read += bytes_read; - } - if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, - tape->buffer_size); - if (bytes_read <= 0) - goto finish; - temp = min((unsigned long)count, (unsigned long)bytes_read); - if (copy_to_user(buf, tape->cur, temp)) + + while (done < count) { + size_t todo; + + /* refill if staging buffer is empty */ + if (!tape->valid) { + /* If we are at a filemark, nothing more to read */ + if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) + break; + /* read */ + if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, + tape->buffer_size) <= 0) + break; + } + + /* copy out */ + todo = min_t(size_t, count - done, tape->valid); + if (copy_to_user(buf + done, tape->cur, todo)) ret = -EFAULT; - actually_read += temp; - tape->cur += temp; - tape->valid -= temp; + + tape->cur += todo; + tape->valid -= todo; + done += todo; } -finish: - if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { + + if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); idetape_space_over_filemarks(drive, MTFSF, 1); return 0; } - return ret ? ret : actually_read; + return ret ? ret : done; } static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, @@ -1248,7 +1218,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t actually_written = 0; + size_t done = 0; ssize_t ret = 0; int rc; @@ -1262,47 +1232,28 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->valid < tape->buffer_size) { - actually_written = min_t(unsigned int, - tape->buffer_size - tape->valid, - count); - if (copy_from_user(tape->cur, buf, actually_written)) - ret = -EFAULT; - buf += actually_written; - count -= actually_written; - tape->cur += actually_written; - tape->valid += actually_written; - - if (tape->valid == tape->buffer_size) { - ssize_t retval; - retval = idetape_add_chrdev_write_request(drive, - tape->buffer_size); - if (retval <= 0) - return (retval); - } - } - while (count >= tape->buffer_size) { - ssize_t retval; - if (copy_from_user(tape->cur, buf, tape->buffer_size)) - ret = -EFAULT; - buf += tape->buffer_size; - count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, - tape->buffer_size); - actually_written += tape->buffer_size; - if (retval <= 0) - return (retval); - } - if (count) { - actually_written += count; - if (copy_from_user(tape->cur, buf, count)) + + while (done < count) { + size_t todo; + + /* flush if staging buffer is full */ + if (tape->valid == tape->buffer_size && + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + tape->buffer_size) <= 0) + return rc; + + /* copy in */ + todo = min_t(size_t, count - done, + tape->buffer_size - tape->valid); + if (copy_from_user(tape->cur, buf + done, todo)) ret = -EFAULT; - tape->cur += count; - tape->valid += count; + + tape->cur += todo; + tape->valid += todo; + done += todo; } - return ret ? ret : actually_written; + + return ret ? ret : done; } static int idetape_write_filemark(ide_drive_t *drive) -- cgit v1.2.3-18-g5258 From 29d1a4371035e01b0d079bc5aa88b50f5af7a566 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-atapi: kill unused fields and callbacks Impact: remove fields and code paths which are no longer necessary Now that ide-tape uses standard mechanisms to transfer data, special case handling for bh handling can be dropped from ide-atapi. Drop the followings. * pc->cur_pos, b_count, bh and b_data * drive->pc_update_buffers() and pc_io_buffers(). Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 17 ++++------------- drivers/ide/ide-tape.c | 1 - 2 files changed, 4 insertions(+), 14 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index b9dd4503cbc..afe5a432387 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -359,11 +359,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) drive->name, rq_data_dir(pc->rq) ? "write" : "read"); pc->flags |= PC_FLAG_DMA_ERROR; - } else { + } else pc->xferred = pc->req_xfer; - if (drive->pc_update_buffers) - drive->pc_update_buffers(drive, pc); - } debug_log("%s: DMA finished\n", drive->name); } @@ -463,16 +460,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } - if (drive->media == ide_tape && pc->bh) - done = drive->pc_io_buffers(drive, pc, bcount, write); - else { - done = min_t(unsigned int, bcount, cmd->nleft); - ide_pio_bytes(drive, cmd, write, done); - } + done = min_t(unsigned int, bcount, cmd->nleft); + ide_pio_bytes(drive, cmd, write, done); - /* Update the current position */ + /* Update transferred byte count */ pc->xferred += done; - pc->cur_pos += done; bcount -= done; @@ -650,7 +642,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) /* We haven't transferred any data yet */ pc->xferred = 0; - pc->cur_pos = pc->buf; valid_tf = IDE_VALID_DEVICE; bcount = ((drive->media == ide_tape) ? diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2599579e417..8dfc68892d6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -591,7 +591,6 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = NULL; pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; -- cgit v1.2.3-18-g5258 From 5ad960fe8d0e4f99fe2b8dded45e8251137293c9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide: drop rq->data handling from ide_map_sg() Impact: remove code path which is no longer necessary All IDE data transfers now use rq->bio. Simplify ide_map_sg() accordingly. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 6e3094e2277..a0309ea661a 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -248,11 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) struct scatterlist *sg = hwif->sg_table; struct request *rq = cmd->rq; - if (!rq->bio) { - sg_init_one(sg, rq->data, rq->data_len); - cmd->sg_nents = 1; - } else - cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); + cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); } EXPORT_SYMBOL_GPL(ide_map_sg); -- cgit v1.2.3-18-g5258 From 586cf2681f527ce8b85b9bd57c8b9f7945fbe051 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Apr 2009 12:16:56 +0900 Subject: ide-dma: don't reset request fields on dma_timeout_retry() Impact: drop unnecessary code Now that everything uses bio and block operations, there is no need to reset request fields manually when retrying a request. Every field is guaranteed to be always valid. Drop unnecessary request field resetting from ide_dma_timeout_retry(). Signed-off-by: Tejun Heo --- drivers/ide/ide-dma.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index a0b8cab1d9a..d9123ecae4a 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -510,23 +510,11 @@ ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) /* * un-busy drive etc and make sure request is sane */ - rq = hwif->rq; - if (!rq) - goto out; - - hwif->rq = NULL; - - rq->errors = 0; - - if (!rq->bio) - goto out; - - rq->sector = rq->bio->bi_sector; - rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; - rq->buffer = bio_data(rq->bio); -out: + if (rq) { + hwif->rq = NULL; + rq->errors = 0; + } return ret; } -- cgit v1.2.3-18-g5258 From 9720aef2539c10e3a872e9a92beec225030d99db Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:36 +0900 Subject: ide-tape: don't initialize rq->sector for rw requests rq->sector is set to the tape->first_frame but it's never actually used and not even in the correct unit (512 byte sectors). Don't set it. [ Impact: cleanup ] Signed-off-by: Tejun Heo Acked-by: Borislav Petkov Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jens Axboe --- drivers/ide/ide-tape.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8dfc68892d6..7149224d1fe 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -892,7 +892,6 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd[13] = cmd; rq->rq_disk = tape->disk; - rq->sector = tape->first_frame; if (size) { ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size, -- cgit v1.2.3-18-g5258 From c3a4d78c580de4edc9ef0f7c59812fb02ceb037f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:37 +0900 Subject: block: add rq->resid_len rq->data_len served two purposes - the length of data buffer on issue and the residual count on completion. This duality creates some headaches. First of all, block layer and low level drivers can't really determine what rq->data_len contains while a request is executing. It could be the total request length or it coulde be anything else one of the lower layers is using to keep track of residual count. This complicates things because blk_rq_bytes() and thus [__]blk_end_request_all() relies on rq->data_len for PC commands. Drivers which want to report residual count should first cache the total request length, update rq->data_len and then complete the request with the cached data length. Secondly, it makes requests default to reporting full residual count, ie. reporting that no data transfer occurred. The residual count is an exception not the norm; however, the driver should clear rq->data_len to zero to signify the normal cases while leaving it alone means no data transfer occurred at all. This reverse default behavior complicates code unnecessarily and renders block PC on some drivers (ide-tape/floppy) unuseable. This patch adds rq->resid_len which is used only for residual count. While at it, remove now unnecessasry blk_rq_bytes() caching in ide_pc_intr() as rq->data_len is not changed anymore. Boaz : spotted missing conversion in osd Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape [ Impact: cleanup residual count handling, report 0 resid by default ] Signed-off-by: Tejun Heo Cc: James Bottomley Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Mike Miller Cc: Eric Moore Cc: Alan Stern Cc: FUJITA Tomonori Cc: Doug Gilbert Cc: Mike Miller Cc: Eric Moore Cc: Darrick J. Wong Cc: Pete Zaitcev Cc: Boaz Harrosh Signed-off-by: Jens Axboe --- drivers/ide/ide-atapi.c | 9 +-------- drivers/ide/ide-cd.c | 13 +++++-------- drivers/ide/ide-tape.c | 4 ++-- 3 files changed, 8 insertions(+), 18 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index afe5a432387..e4a02a05fc8 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -367,7 +367,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) /* No more interrupts */ if ((stat & ATA_DRQ) == 0) { int uptodate, error; - unsigned int done; debug_log("Packet command completed, %d bytes transferred\n", pc->xferred); @@ -406,12 +405,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) dsc = 1; - /* - * ->pc_callback() might change rq->data_len for - * residual count, cache total length. - */ - done = blk_rq_bytes(rq); - /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); @@ -431,7 +424,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) error = uptodate ? 0 : -EIO; } - ide_complete_rq(drive, error, done); + ide_complete_rq(drive, error, blk_rq_bytes(rq)); return ide_stopped; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 673628790f1..8bbe222c5e4 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -519,7 +519,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, error = blk_execute_rq(drive->queue, info->disk, rq, 0); if (buffer) - *bufflen = rq->data_len; + *bufflen = rq->resid_len; flags = rq->cmd_flags; blk_put_request(rq); @@ -707,11 +707,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) out_end: if (blk_pc_request(rq) && rc == 0) { - unsigned int dlen = rq->data_len; - - rq->data_len = 0; - - if (blk_end_request(rq, 0, dlen)) + if (blk_end_request(rq, 0, rq->data_len)) BUG(); hwif->rq = NULL; @@ -740,9 +736,10 @@ out_end: nsectors = 1; if (blk_fs_request(rq) == 0) { - rq->data_len -= (cmd->nbytes - cmd->nleft); + rq->resid_len = rq->data_len - + (cmd->nbytes - cmd->nleft); if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE)) - rq->data_len += cmd->last_xfer_len; + rq->resid_len += cmd->last_xfer_len; } ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7149224d1fe..65c5b705883 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->data_len -= blocks * tape->blk_size; + rq->resid_len = rq->data_len - blocks * tape->blk_size; if (pc->error) { uptodate = 0; @@ -903,7 +903,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) blk_execute_rq(drive->queue, tape->disk, rq, 0); /* calculate the number of transferred bytes and update buffer state */ - size -= rq->data_len; + size -= rq->resid_len; tape->cur = tape->buf; if (cmd == REQ_IDETAPE_READ) tape->valid = size; -- cgit v1.2.3-18-g5258 From 5b93629b4509c03ffa87a9316412fedf6f58cb37 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:38 +0900 Subject: block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones Implement accessors - blk_rq_pos(), blk_rq_sectors() and blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors and rq->hard_cur_sectors respectively and convert direct references of the said fields to the accessors. This is in preparation of request data length handling cleanup. Geert : suggested adding const to struct request * parameter to accessors Sergei : spotted error in patch description [ Impact: cleanup ] Signed-off-by: Tejun Heo Acked-by: Geert Uytterhoeven Acked-by: Stephen Rothwell Tested-by: Grant Likely Acked-by: Grant Likely Ackec-by: Sergei Shtylyov Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: James Bottomley Signed-off-by: Jens Axboe --- drivers/ide/ide-cd.c | 8 ++++---- drivers/ide/ide-io.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 8bbe222c5e4..182320dd6ea 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -730,7 +730,7 @@ out_end: if (blk_pc_request(rq)) nsectors = (rq->data_len + 511) >> 9; else - nsectors = rq->hard_nr_sectors; + nsectors = blk_rq_sectors(rq); if (nsectors == 0) nsectors = 1; @@ -875,7 +875,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, return ide_issue_pc(drive, &cmd); out_end: - nsectors = rq->hard_nr_sectors; + nsectors = blk_rq_sectors(rq); if (nsectors == 0) nsectors = 1; @@ -1359,8 +1359,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq) { int hard_sect = queue_hardsect_size(q); - long block = (long)rq->hard_sector / (hard_sect >> 9); - unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9); + long block = (long)blk_rq_pos(rq) / (hard_sect >> 9); + unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9); memset(rq->cmd, 0, BLK_MAX_CDB); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index a0309ea661a..df23bcbd94b 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -118,7 +118,7 @@ unsigned int ide_rq_bytes(struct request *rq) if (blk_pc_request(rq)) return rq->data_len; else - return rq->hard_cur_sectors << 9; + return blk_rq_cur_sectors(rq) << 9; } EXPORT_SYMBOL_GPL(ide_rq_bytes); @@ -133,7 +133,7 @@ int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes) * and complete the whole request right now */ if (blk_noretry_request(rq) && error <= 0) - nr_bytes = rq->hard_nr_sectors << 9; + nr_bytes = blk_rq_sectors(rq) << 9; rc = ide_end_rq(drive, rq, error, nr_bytes); if (rc == 0) -- cgit v1.2.3-18-g5258 From 9780e2dd8254351f6cbe11304849126b51dbd561 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:40 +0900 Subject: ide: convert to rq pos and nr_sectors accessors ide doesn't manipulate request fields anymore and thus all hard and their soft equivalents are always equal. Convert all references to accessors. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo Acked-by: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Signed-off-by: Jens Axboe --- drivers/ide/ide-cd.c | 8 ++++---- drivers/ide/ide-disk.c | 8 ++++---- drivers/ide/ide-dma.c | 2 +- drivers/ide/ide-floppy.c | 6 +++--- drivers/ide/ide-io.c | 4 ++-- drivers/ide/ide-lib.c | 2 +- drivers/ide/ide-tape.c | 6 +++--- drivers/ide/ide-taskfile.c | 2 +- drivers/ide/pdc202xx_old.c | 2 +- drivers/ide/tc86c001.c | 2 +- drivers/ide/tx4939ide.c | 2 +- 11 files changed, 22 insertions(+), 22 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 182320dd6ea..eb4f3dc9f18 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -775,8 +775,8 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) } /* fs requests *must* be hardware frame aligned */ - if ((rq->nr_sectors & (sectors_per_frame - 1)) || - (rq->sector & (sectors_per_frame - 1))) + if ((blk_rq_sectors(rq) & (sectors_per_frame - 1)) || + (blk_rq_pos(rq) & (sectors_per_frame - 1))) return ide_stopped; /* use DMA, if possible */ @@ -868,8 +868,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cmd.rq = rq; if (blk_fs_request(rq) || rq->data_len) { - ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? (rq->nr_sectors << 9) - : rq->data_len); + ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? + (blk_rq_sectors(rq) << 9) : rq->data_len); ide_map_sg(drive, &cmd); } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index c2438804d3c..ad18e14043c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -82,7 +82,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) { ide_hwif_t *hwif = drive->hwif; - u16 nsectors = (u16)rq->nr_sectors; + u16 nsectors = (u16)blk_rq_sectors(rq); u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); struct ide_cmd cmd; @@ -90,7 +90,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, ide_startstop_t rc; if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) { - if (block + rq->nr_sectors > 1ULL << 28) + if (block + blk_rq_sectors(rq) > 1ULL << 28) dma = 0; else lba48 = 0; @@ -195,9 +195,9 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, ledtrig_ide_activity(); - pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n", + pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n", drive->name, rq_data_dir(rq) == READ ? "read" : "writ", - (unsigned long long)block, rq->nr_sectors, + (unsigned long long)block, blk_rq_sectors(rq), (unsigned long)rq->buffer); if (hwif->rw_disk) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index d9123ecae4a..001f68f0bb2 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -103,7 +103,7 @@ ide_startstop_t ide_dma_intr(ide_drive_t *drive) ide_finish_cmd(drive, cmd, stat); else ide_complete_rq(drive, 0, - cmd->rq->nr_sectors << 9); + blk_rq_sectors(cmd->rq) << 9); return ide_stopped; } printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n", diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 537b7c55803..1c460bd5637 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -194,7 +194,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive, { struct ide_disk_obj *floppy = drive->driver_data; int block = sector / floppy->bs_factor; - int blocks = rq->nr_sectors / floppy->bs_factor; + int blocks = blk_rq_sectors(rq) / floppy->bs_factor; int cmd = rq_data_dir(rq); ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks); @@ -259,8 +259,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, goto out_end; } if (blk_fs_request(rq)) { - if (((long)rq->sector % floppy->bs_factor) || - (rq->nr_sectors % floppy->bs_factor)) { + if (((long)blk_rq_pos(rq) % floppy->bs_factor) || + (blk_rq_sectors(rq) % floppy->bs_factor)) { printk(KERN_ERR PFX "%s: unsupported r/w rq size\n", drive->name); goto out_end; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index df23bcbd94b..59799ca5524 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -279,7 +279,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, if (cmd) { if (cmd->protocol == ATA_PROT_PIO) { - ide_init_sg_cmd(cmd, rq->nr_sectors << 9); + ide_init_sg_cmd(cmd, blk_rq_sectors(rq) << 9); ide_map_sg(drive, cmd); } @@ -387,7 +387,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) drv = *(struct ide_driver **)rq->rq_disk->private_data; - return drv->do_request(drive, rq, rq->sector); + return drv->do_request(drive, rq, blk_rq_pos(rq)); } return do_special(drive); kill_rq: diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 56ff8c46c7d..05b7fbc7ead 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -114,7 +114,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) if (rq) printk(KERN_CONT ", sector=%llu", - (unsigned long long)rq->sector); + (unsigned long long)blk_rq_pos(rq)); } printk(KERN_CONT "\n"); } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 65c5b705883..c6cf3a951f2 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -586,7 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, struct request *rq, u8 opcode) { - unsigned int length = rq->nr_sectors; + unsigned int length = blk_rq_sectors(rq); ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); @@ -617,8 +617,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n" - (unsigned long long)rq->sector, rq->nr_sectors); + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n" + (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq)); if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index f400eb4d4af..a0c3e1b2f73 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -385,7 +385,7 @@ out_end: if ((cmd->tf_flags & IDE_TFLAG_FS) == 0) ide_finish_cmd(drive, cmd, stat); else - ide_complete_rq(drive, 0, cmd->rq->nr_sectors << 9); + ide_complete_rq(drive, 0, blk_rq_sectors(cmd->rq) << 9); return ide_stopped; out_err: ide_error_cmd(drive, cmd); diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 248a54bd238..c2a16a8f486 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -177,7 +177,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive) u8 clock = inb(high_16 + 0x11); outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11); - word_count = (rq->nr_sectors << 8); + word_count = (blk_rq_sectors(rq) << 8); word_count = (rq_data_dir(rq) == READ) ? word_count | 0x05000000 : word_count | 0x06000000; diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c index b4cf42dc8a6..05a93d6baec 100644 --- a/drivers/ide/tc86c001.c +++ b/drivers/ide/tc86c001.c @@ -112,7 +112,7 @@ static void tc86c001_dma_start(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; unsigned long sc_base = hwif->config_data; unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04); - unsigned long nsectors = hwif->rq->nr_sectors; + unsigned long nsectors = blk_rq_sectors(hwif->rq); /* * We have to manually load the sector count and size into diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 564422d2397..5ca76224f6d 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -307,7 +307,7 @@ static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ? TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1); - tx4939ide_writew(cmd->rq->nr_sectors, base, TX4939IDE_Sec_Cnt); + tx4939ide_writew(blk_rq_sectors(cmd->rq), base, TX4939IDE_Sec_Cnt); return 0; } -- cgit v1.2.3-18-g5258 From 34b7d2c957199834c474c9d46739265643f4d9c7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:43 +0900 Subject: ide: cleanup rq->data_len usages With recent unification of fields, it's now guaranteed that rq->data_len always equals blk_rq_bytes(). Convert all direct users to accessors. [ Impact: convert direct rq->data_len usages to blk_rq_bytes() ] Signed-off-by: Tejun Heo Acked-by: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Signed-off-by: Jens Axboe --- drivers/ide/ide-atapi.c | 4 ++-- drivers/ide/ide-cd.c | 25 +++++++------------------ drivers/ide/ide-floppy.c | 4 ++-- drivers/ide/ide-io.c | 2 +- drivers/ide/ide-tape.c | 2 +- 5 files changed, 13 insertions(+), 24 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index e4a02a05fc8..792534db8f8 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -255,7 +255,7 @@ void ide_retry_pc(ide_drive_t *drive) ide_init_pc(pc); memcpy(pc->c, sense_rq->cmd, 12); pc->buf = bio_data(sense_rq->bio); /* pointer to mapped address */ - pc->req_xfer = sense_rq->data_len; + pc->req_xfer = blk_rq_bytes(sense_rq); if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); @@ -303,7 +303,7 @@ int ide_cd_get_xferlen(struct request *rq) return 32768; else if (blk_sense_request(rq) || blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) - return rq->data_len; + return blk_rq_bytes(rq); else return 0; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index eb4f3dc9f18..2eadc9d2e96 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -577,7 +577,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) struct request *rq = hwif->rq; ide_expiry_t *expiry = NULL; int dma_error = 0, dma, thislen, uptodate = 0; - int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors; + int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0; int sense = blk_sense_request(rq); unsigned int timeout; u16 len; @@ -707,9 +707,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) out_end: if (blk_pc_request(rq) && rc == 0) { - if (blk_end_request(rq, 0, rq->data_len)) - BUG(); - + blk_end_request_all(rq, 0); hwif->rq = NULL; } else { if (sense && uptodate) @@ -727,22 +725,14 @@ out_end: ide_cd_error_cmd(drive, cmd); /* make sure it's fully ended */ - if (blk_pc_request(rq)) - nsectors = (rq->data_len + 511) >> 9; - else - nsectors = blk_rq_sectors(rq); - - if (nsectors == 0) - nsectors = 1; - if (blk_fs_request(rq) == 0) { - rq->resid_len = rq->data_len - + rq->resid_len = blk_rq_bytes(rq) - (cmd->nbytes - cmd->nleft); if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE)) rq->resid_len += cmd->last_xfer_len; } - ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9); + ide_complete_rq(drive, uptodate ? 0 : -EIO, blk_rq_bytes(rq)); if (sense && rc == 2) ide_error(drive, "request sense failure", stat); @@ -819,7 +809,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) */ alignment = queue_dma_alignment(q) | q->dma_pad_mask; if ((unsigned long)buf & alignment - || rq->data_len & q->dma_pad_mask + || blk_rq_bytes(rq) & q->dma_pad_mask || object_is_on_stack(buf)) drive->dma = 0; } @@ -867,9 +857,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cmd.rq = rq; - if (blk_fs_request(rq) || rq->data_len) { - ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? - (blk_rq_sectors(rq) << 9) : rq->data_len); + if (blk_fs_request(rq) || blk_rq_bytes(rq)) { + ide_init_sg_cmd(&cmd, blk_rq_bytes(rq)); ide_map_sg(drive, &cmd); } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 1c460bd5637..650981758f1 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -220,14 +220,14 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - if (rq->data_len) { + if (blk_rq_bytes(rq)) { pc->flags |= PC_FLAG_DMA_OK; if (rq_data_dir(rq) == WRITE) pc->flags |= PC_FLAG_WRITING; } /* pio will be performed by ide_pio_bytes() which handles sg fine */ pc->buf = NULL; - pc->req_xfer = pc->buf_size = rq->data_len; + pc->req_xfer = pc->buf_size = blk_rq_bytes(rq); } static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 59799ca5524..ca2519d7b99 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -116,7 +116,7 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) unsigned int ide_rq_bytes(struct request *rq) { if (blk_pc_request(rq)) - return rq->data_len; + return blk_rq_bytes(rq); else return blk_rq_cur_sectors(rq) << 9; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index c6cf3a951f2..e16604562f2 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->resid_len = rq->data_len - blocks * tape->blk_size; + rq->resid_len = blk_rq_bytes(rq) - blocks * tape->blk_size; if (pc->error) { uptodate = 0; -- cgit v1.2.3-18-g5258 From 8f6205cd572fece673da0255d74843680f67f879 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:53:59 +0900 Subject: ide: dequeue in-flight request ide generally has single request in flight and tracks it using hwif->rq and all state handlers follow the following convention. * ide_started is returned if the request is in flight. * ide_stopped is returned if the queue needs to be restarted. The request might or might not have been processed fully or partially. * hwif->rq is set to NULL, when an issued request completes. So, dequeueing model can be implemented by dequeueing after fetch, requeueing if hwif->rq isn't NULL on ide_stopped return and doing about the same thing on completion / port unlock paths. These changes can be made in ide-io proper. In addition to the above main changes, the following updates are necessary. * ide-cd shouldn't dequeue a request when issuing REQUEST SENSE for it as the request is already dequeued. * ide-atapi uses request queue as stack when issuing REQUEST SENSE to put the REQUEST SENSE in front of the failed request. This now needs to be done using requeueing. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Signed-off-by: Jens Axboe --- drivers/ide/ide-atapi.c | 14 ++++++++++++-- drivers/ide/ide-cd.c | 8 -------- drivers/ide/ide-io.c | 34 +++++++++++++++++++++++++++------- 3 files changed, 39 insertions(+), 17 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 792534db8f8..2874c3d703a 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -246,6 +246,7 @@ EXPORT_SYMBOL_GPL(ide_queue_sense_rq); */ void ide_retry_pc(ide_drive_t *drive) { + struct request *failed_rq = drive->hwif->rq; struct request *sense_rq = &drive->sense_rq; struct ide_atapi_pc *pc = &drive->request_sense_pc; @@ -260,8 +261,17 @@ void ide_retry_pc(ide_drive_t *drive) if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - if (ide_queue_sense_rq(drive, pc)) - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + /* + * Push back the failed request and put request sense on top + * of it. The failed command will be retried after sense data + * is acquired. + */ + blk_requeue_request(failed_rq->q, failed_rq); + drive->hwif->rq = NULL; + if (ide_queue_sense_rq(drive, pc)) { + blkdev_dequeue_request(failed_rq); + ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq)); + } } EXPORT_SYMBOL_GPL(ide_retry_pc); diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 2eadc9d2e96..4c7792fd5f9 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -405,15 +405,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) end_request: if (stat & ATA_ERR) { - struct request_queue *q = drive->queue; - unsigned long flags; - - spin_lock_irqsave(q->queue_lock, flags); - blkdev_dequeue_request(rq); - spin_unlock_irqrestore(q->queue_lock, flags); - hwif->rq = NULL; - return ide_queue_sense_rq(drive, rq) ? 2 : 1; } else return 2; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index ca2519d7b99..abda7337b3f 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -487,10 +487,10 @@ void do_ide_request(struct request_queue *q) if (!ide_lock_port(hwif)) { ide_hwif_t *prev_port; + + WARN_ON_ONCE(hwif->rq); repeat: prev_port = hwif->host->cur_port; - hwif->rq = NULL; - if (drive->dev_flags & IDE_DFLAG_SLEEPING && time_after(drive->sleep, jiffies)) { ide_unlock_port(hwif); @@ -519,7 +519,12 @@ repeat: * we know that the queue isn't empty, but this can happen * if the q->prep_rq_fn() decides to kill a request */ - rq = elv_next_request(drive->queue); + if (!rq) { + rq = elv_next_request(drive->queue); + if (rq) + blkdev_dequeue_request(rq); + } + spin_unlock_irq(q->queue_lock); spin_lock_irq(&hwif->lock); @@ -555,8 +560,11 @@ repeat: startstop = start_request(drive, rq); spin_lock_irq(&hwif->lock); - if (startstop == ide_stopped) + if (startstop == ide_stopped) { + rq = hwif->rq; + hwif->rq = NULL; goto repeat; + } } else goto plug_device; out: @@ -572,18 +580,24 @@ plug_device: plug_device_2: spin_lock_irq(q->queue_lock); + if (rq) + blk_requeue_request(q, rq); if (!elv_queue_empty(q)) blk_plug_device(q); } -static void ide_plug_device(ide_drive_t *drive) +static void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq) { struct request_queue *q = drive->queue; unsigned long flags; spin_lock_irqsave(q->queue_lock, flags); + + if (rq) + blk_requeue_request(q, rq); if (!elv_queue_empty(q)) blk_plug_device(q); + spin_unlock_irqrestore(q->queue_lock, flags); } @@ -632,6 +646,7 @@ void ide_timer_expiry (unsigned long data) unsigned long flags; int wait = -1; int plug_device = 0; + struct request *uninitialized_var(rq_in_flight); spin_lock_irqsave(&hwif->lock, flags); @@ -693,6 +708,8 @@ void ide_timer_expiry (unsigned long data) spin_lock_irq(&hwif->lock); enable_irq(hwif->irq); if (startstop == ide_stopped) { + rq_in_flight = hwif->rq; + hwif->rq = NULL; ide_unlock_port(hwif); plug_device = 1; } @@ -701,7 +718,7 @@ void ide_timer_expiry (unsigned long data) if (plug_device) { ide_unlock_host(hwif->host); - ide_plug_device(drive); + ide_requeue_and_plug(drive, rq_in_flight); } } @@ -787,6 +804,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) ide_startstop_t startstop; irqreturn_t irq_ret = IRQ_NONE; int plug_device = 0; + struct request *uninitialized_var(rq_in_flight); if (host->host_flags & IDE_HFLAG_SERIALIZE) { if (hwif != host->cur_port) @@ -866,6 +884,8 @@ irqreturn_t ide_intr (int irq, void *dev_id) */ if (startstop == ide_stopped) { BUG_ON(hwif->handler); + rq_in_flight = hwif->rq; + hwif->rq = NULL; ide_unlock_port(hwif); plug_device = 1; } @@ -875,7 +895,7 @@ out: out_early: if (plug_device) { ide_unlock_host(hwif->host); - ide_plug_device(drive); + ide_requeue_and_plug(drive, rq_in_flight); } return irq_ret; -- cgit v1.2.3-18-g5258 From 9934c8c04561413609d2bc38c6b9f268cba774a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:16 +0900 Subject: block: implement and enforce request peek/start/fetch Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo Cc: Rusty Russell Cc: James Bottomley Cc: Mike Miller Cc: unsik Kim Cc: Paul Clements Cc: Tim Waugh Cc: Geert Uytterhoeven Cc: David S. Miller Cc: Laurent Vivier Cc: Jeff Garzik Cc: Jeremy Fitzhardinge Cc: Grant Likely Cc: Adrian McMenamin Cc: Stephen Rothwell Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Alex Dubov Cc: Pierre Ossman Cc: David Woodhouse Cc: Markus Lidel Cc: Stefan Weinhuber Cc: Martin Schwidefsky Cc: Pete Zaitcev Cc: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/ide/ide-atapi.c | 2 +- drivers/ide/ide-io.c | 9 +++------ 2 files changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 2874c3d703a..8a894fa37b5 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -269,7 +269,7 @@ void ide_retry_pc(ide_drive_t *drive) blk_requeue_request(failed_rq->q, failed_rq); drive->hwif->rq = NULL; if (ide_queue_sense_rq(drive, pc)) { - blkdev_dequeue_request(failed_rq); + blk_start_request(failed_rq); ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq)); } } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index abda7337b3f..e4e3a0e3201 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -519,11 +519,8 @@ repeat: * we know that the queue isn't empty, but this can happen * if the q->prep_rq_fn() decides to kill a request */ - if (!rq) { - rq = elv_next_request(drive->queue); - if (rq) - blkdev_dequeue_request(rq); - } + if (!rq) + rq = blk_fetch_request(drive->queue); spin_unlock_irq(q->queue_lock); spin_lock_irq(&hwif->lock); @@ -536,7 +533,7 @@ repeat: /* * Sanity: don't accept a request that isn't a PM request * if we are currently power managed. This is very important as - * blk_stop_queue() doesn't prevent the elv_next_request() + * blk_stop_queue() doesn't prevent the blk_fetch_request() * above to return us whatever is in the queue. Since we call * ide_do_request() ourselves, we end up taking requests while * the queue is blocked... -- cgit v1.2.3-18-g5258 From 5f49f63178360b07a095bd33b0d850d60edf7590 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 19 May 2009 18:33:05 +0900 Subject: block: set rq->resid_len to blk_rq_bytes() on issue In commit c3a4d78c580de4edc9ef0f7c59812fb02ceb037f, while introducing rq->resid_len, the default value of residue count was changed from full count to zero. The conversion was done under the assumption that when a request fails residue count wasn't defined. However, Boaz and James pointed out that this wasn't true and the residue count should be preserved for failed requests too. This patchset restores the original behavior by setting rq->resid_len to blk_rq_bytes(rq) on request start and restoring explicit clearing in affected drivers. While at it, take advantage of the fact that rq->resid_len is set to full count where applicable. * ide-cd: rq->resid_len cleared on pc success * mptsas: req->resid_len cleared on success * sas_expander: rsp/req->resid_len cleared on success * mpt2sas_transport: req->resid_len cleared on success * ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take advantage of initial full count to simplify code Boaz Harrosh spotted bug in resid_len initialization. Fixed as suggested. Signed-off-by: Tejun Heo Acked-by: Borislav Petkov Cc: Boaz Harrosh Cc: James Bottomley Cc: Pete Zaitcev Cc: Bartlomiej Zolnierkiewicz Cc: Sergei Shtylyov Cc: Eric Moore Cc: Darrick J. Wong Signed-off-by: Jens Axboe --- drivers/ide/ide-cd.c | 4 ++-- drivers/ide/ide-tape.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 4c7792fd5f9..081aed6781c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -699,6 +699,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) out_end: if (blk_pc_request(rq) && rc == 0) { + rq->resid_len = 0; blk_end_request_all(rq, 0); hwif->rq = NULL; } else { @@ -718,8 +719,7 @@ out_end: /* make sure it's fully ended */ if (blk_fs_request(rq) == 0) { - rq->resid_len = blk_rq_bytes(rq) - - (cmd->nbytes - cmd->nleft); + rq->resid_len -= cmd->nbytes - cmd->nleft; if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE)) rq->resid_len += cmd->last_xfer_len; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index e16604562f2..683ff37d407 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->resid_len = blk_rq_bytes(rq) - blocks * tape->blk_size; + rq->resid_len -= blocks * tape->blk_size; if (pc->error) { uptodate = 0; -- cgit v1.2.3-18-g5258 From e1defc4ff0cf57aca6c5e3ff99fa503f5943c1f1 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 22 May 2009 17:17:49 -0400 Subject: block: Do away with the notion of hardsect_size Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/ide/ide-cd.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 1799328decf..424140c6c40 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -182,7 +182,7 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, (sense->information[2] << 8) | (sense->information[3]); - if (drive->queue->hardsect_size == 2048) + if (queue_logical_block_size(drive->queue) == 2048) /* device sector size is 2K */ sector <<= 2; @@ -737,7 +737,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) struct request_queue *q = drive->queue; int write = rq_data_dir(rq) == WRITE; unsigned short sectors_per_frame = - queue_hardsect_size(q) >> SECTOR_BITS; + queue_logical_block_size(q) >> SECTOR_BITS; ide_debug_log(IDE_DBG_RQ, "rq->cmd[0]: 0x%x, rq->cmd_flags: 0x%x, " "secs_per_frame: %u", @@ -1021,8 +1021,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) /* save a private copy of the TOC capacity for error handling */ drive->probed_capacity = toc->capacity * sectors_per_frame; - blk_queue_hardsect_size(drive->queue, - sectors_per_frame << SECTOR_BITS); + blk_queue_logical_block_size(drive->queue, + sectors_per_frame << SECTOR_BITS); /* first read just the header, so we know how long the TOC is */ stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr, @@ -1338,7 +1338,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) /* standard prep_rq_fn that builds 10 byte cmds */ static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq) { - int hard_sect = queue_hardsect_size(q); + int hard_sect = queue_logical_block_size(q); long block = (long)blk_rq_pos(rq) / (hard_sect >> 9); unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9); @@ -1543,7 +1543,7 @@ static int ide_cdrom_setup(ide_drive_t *drive) nslots = ide_cdrom_probe_capabilities(drive); - blk_queue_hardsect_size(q, CD_FRAMESIZE); + blk_queue_logical_block_size(q, CD_FRAMESIZE); if (ide_cdrom_register(drive, nslots)) { printk(KERN_ERR PFX "%s: %s failed to register device with the" -- cgit v1.2.3-18-g5258 From 3b77f777b8f1c001b63e317c4ce317292ff0ff94 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sat, 23 May 2009 08:23:16 +0200 Subject: ide-disk: fix missing max_sectors accessor function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The recent move to accessor functions for querying queue limits missed an entry in ide-disk.c: drivers/ide/ide-disk.c: In function ‘ide_disk_setup’: drivers/ide/ide-disk.c:642: error: ‘struct request_queue’ has no member named ‘max_sectors’ Fix it. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/ide/ide-disk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index ad18e14043c..c6f7fcfb9d6 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -639,7 +639,7 @@ static void ide_disk_setup(ide_drive_t *drive) } printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, - q->max_sectors / 2); + queue_max_sectors(q) / 2); if (ata_id_is_ssd(id)) queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); -- cgit v1.2.3-18-g5258