From 03682411b1ccd38cbde2e9a6ab43884ff34fbefc Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 30 Apr 2009 18:38:01 +0200 Subject: alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC Some time ago we had to disable init_hwif callback for PowerPC builds. That was because of a historical IRQ overwrite in the driver, which was causing IDE malfunction on the MPC8610HPCD PowerPC boards. It's unclear whether this overwrite is still useful, but it is proven to cause a bit of harm, and today some PowerPC targets (Xilinx ML510, as reported by Roderick Colenbrander) need the init_hwif, so we have to re-enable it and remove the overwrite. Reported-by: Roderick Colenbrander Suggested-by: Bartlomiej Zolnierkiewicz Cc: Benjamin Herrenschmidt Signed-off-by: Anton Vorontsov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/alim15x3.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index 537da1cde16..e59b6dee9ae 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -402,27 +402,23 @@ static u8 ali_cable_detect(ide_hwif_t *hwif) return cbl; } -#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) +#ifndef CONFIG_SPARC64 /** * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff * @hwif: interface to configure * * Obtain the IRQ tables for an ALi based IDE solution on the PC * class platforms. This part of the code isn't applicable to the - * Sparc and PowerPC systems. + * Sparc systems. */ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); u8 ideic, inmir; s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; int irq = -1; - if (dev->device == PCI_DEVICE_ID_AL_M5229) - hwif->irq = hwif->channel ? 15 : 14; - if (isa_dev) { /* * read IDE interface control @@ -455,7 +451,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) } #else #define init_hwif_ali15x3 NULL -#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */ +#endif /* CONFIG_SPARC64 */ /** * init_dma_ali15x3 - set up DMA on ALi15x3 -- cgit v1.2.3-18-g5258