From 21a89d4101ce338c2872401c82b66a7c155e24ab Mon Sep 17 00:00:00 2001 From: Shinya Kuribayashi Date: Fri, 6 Nov 2009 21:48:33 +0900 Subject: i2c-designware: Enable RX_FULL interrupt Enable RX_FULL interrupt mask by default, and hook it in the interrupt handler. If requested amount of rx data (defined by IC_RX_TL) is not available, we don't have to process i2c_dw_read(). Signed-off-by: Shinya Kuribayashi Acked-by: Baruch Siach Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-designware.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c index 0eea0dd3589..940bbf31bc8 100644 --- a/drivers/i2c/busses/i2c-designware.c +++ b/drivers/i2c/busses/i2c-designware.c @@ -342,7 +342,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) u32 addr = msgs[dev->msg_write_idx].addr; u32 buf_len = dev->tx_buf_len; - intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT; + intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT | DW_IC_INTR_RX_FULL; if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) { /* Disable the adapter */ @@ -593,10 +593,11 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) dev->status = STATUS_IDLE; } - if (stat & DW_IC_INTR_TX_EMPTY) { + if (stat & DW_IC_INTR_RX_FULL) i2c_dw_read(dev); + + if (stat & DW_IC_INTR_TX_EMPTY) i2c_dw_xfer_msg(dev); - } /* * No need to modify or disable the interrupt mask here. -- cgit v1.2.3-18-g5258