From 6d905e67cfd84b42c2171e252a3a0aca269da9f8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 9 Dec 2009 20:35:45 +0100
Subject: hwmon: (s3c-hwmon) Fix build error

The previous patch, commit be4c23c93c4828d36ac9e1a88410618a61676426 was
from the wrong tree and thus broke the current build which had the
channel configuration name changed.

Fix the following build errors:

drivers/hwmon/s3c-hwmon.c: In function 's3c_hwmon_probe':
drivers/hwmon/s3c-hwmon.c:326: warning: initialization from incompatible pointer type
drivers/hwmon/s3c-hwmon.c:331: error: dereferencing pointer to incomplete type
drivers/hwmon/s3c-hwmon.c:336: error: dereferencing pointer to incomplete type

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/s3c-hwmon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index 71835412529..3f3f9a47acf 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -323,7 +323,7 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev)
 	}
 
 	for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
-		struct s3c24xx_adc_hwmon_incfg *cfg = pdata->in[i];
+		struct s3c_hwmon_chcfg *cfg = pdata->in[i];
 
 		if (!cfg)
 			continue;
@@ -333,7 +333,7 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev)
 				 "channel %d multiplier too large\n",
 				 i);
 
-		if (cfg->divider == 0) {
+		if (cfg->div == 0) {
 			dev_err(&dev->dev, "channel %d divider zero\n", i);
 			continue;
 		}
-- 
cgit v1.2.3-18-g5258


From 895ff267686663afa894314b749d23ac2867434a Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:47 +0100
Subject: hwmon: (it87) Verify the VID pin usage

The VID input pins can alternatively be used as GPIOs. Make sure we
have at least 4 pins used for VID, otherwise don't bother reading and
exposing VID.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Adam Nielsen <a.nielsen@shikadi.net>
---
 drivers/hwmon/it87.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a3749cb0f18..2f782e3f9a2 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -124,6 +124,7 @@ superio_exit(void)
 #define IT87_BASE_REG 0x60
 
 /* Logical device 7 registers (IT8712F and later) */
+#define IT87_SIO_GPIO3_REG	0x27
 #define IT87_SIO_PINX2_REG	0x2c	/* Pin selection */
 #define IT87_SIO_VID_REG	0xfc	/* VID value */
 
@@ -244,6 +245,7 @@ struct it87_sio_data {
 	/* Values read from Super-I/O config space */
 	u8 revision;
 	u8 vid_value;
+	u8 skip_vid;
 	/* Values set based on DMI strings */
 	u8 skip_pwm;
 };
@@ -1028,11 +1030,22 @@ static int __init it87_find(unsigned short *address,
 		chip_type, *address, sio_data->revision);
 
 	/* Read GPIO config and VID value from LDN 7 (GPIO) */
-	if (sio_data->type != it87) {
+	if (sio_data->type == it87) {
+		/* The IT8705F doesn't have VID pins at all */
+		sio_data->skip_vid = 1;
+	} else {
 		int reg;
 
 		superio_select(GPIO);
-		if (sio_data->type == it8718 || sio_data->type == it8720)
+		/* We need at least 4 VID pins */
+		reg = superio_inb(IT87_SIO_GPIO3_REG);
+		if (reg & 0x0f) {
+			pr_info("it87: VID is disabled (pins used for GPIO)\n");
+			sio_data->skip_vid = 1;
+		}
+
+		if ((sio_data->type == it8718 || sio_data->type == it8720)
+		 && !(sio_data->skip_vid))
 			sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
 
 		reg = superio_inb(IT87_SIO_PINX2_REG);
@@ -1236,8 +1249,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (data->type == it8712 || data->type == it8716
-	 || data->type == it8718 || data->type == it8720) {
+	if (!sio_data->skip_vid) {
 		data->vrm = vid_which_vrm();
 		/* VID reading from Super-I/O config space if available */
 		data->vid = sio_data->vid_value;
-- 
cgit v1.2.3-18-g5258


From 591ec6509ed888723caf6ac8ced3f6f718625a1f Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:48 +0100
Subject: hwmon: (it87) Check for fan2 and fan3 availability

The fan2 and fan3 input and output pins can be used as GPIOs. Check
their function before exposing their sysfs attributes and accessing
their registers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/it87.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 2f782e3f9a2..0ffe84d190b 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -125,6 +125,7 @@ superio_exit(void)
 
 /* Logical device 7 registers (IT8712F and later) */
 #define IT87_SIO_GPIO3_REG	0x27
+#define IT87_SIO_GPIO5_REG	0x29
 #define IT87_SIO_PINX2_REG	0x2c	/* Pin selection */
 #define IT87_SIO_VID_REG	0xfc	/* VID value */
 
@@ -245,8 +246,9 @@ struct it87_sio_data {
 	/* Values read from Super-I/O config space */
 	u8 revision;
 	u8 vid_value;
+	/* Features skipped based on config or DMI */
 	u8 skip_vid;
-	/* Values set based on DMI strings */
+	u8 skip_fan;
 	u8 skip_pwm;
 };
 
@@ -1044,6 +1046,19 @@ static int __init it87_find(unsigned short *address,
 			sio_data->skip_vid = 1;
 		}
 
+		/* Check if fan3 is there or not */
+		if (reg & (1 << 6))
+			sio_data->skip_pwm |= (1 << 2);
+		if (reg & (1 << 7))
+			sio_data->skip_fan |= (1 << 2);
+
+		/* Check if fan2 is there or not */
+		reg = superio_inb(IT87_SIO_GPIO5_REG);
+		if (reg & (1 << 1))
+			sio_data->skip_pwm |= (1 << 1);
+		if (reg & (1 << 2))
+			sio_data->skip_fan |= (1 << 1);
+
 		if ((sio_data->type == it8718 || sio_data->type == it8720)
 		 && !(sio_data->skip_vid))
 			sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
@@ -1367,8 +1382,10 @@ static int __devinit it87_check_pwm(struct device *dev)
 /* Called when we have found a new IT87. */
 static void __devinit it87_init_device(struct platform_device *pdev)
 {
+	struct it87_sio_data *sio_data = pdev->dev.platform_data;
 	struct it87_data *data = platform_get_drvdata(pdev);
 	int tmp, i;
+	u8 mask;
 
 	/* initialize to sane defaults:
 	 * - if the chip is in manual pwm mode, this will be overwritten with
@@ -1414,10 +1431,11 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	}
 
 	/* Check if tachometers are reset manually or by some reason */
+	mask = 0x70 & ~(sio_data->skip_fan << 4);
 	data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
-	if ((data->fan_main_ctrl & 0x70) == 0) {
+	if ((data->fan_main_ctrl & mask) == 0) {
 		/* Enable all fan tachometers */
-		data->fan_main_ctrl |= 0x70;
+		data->fan_main_ctrl |= mask;
 		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
 	}
 	data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
@@ -1440,6 +1458,9 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 		}
 	}
 
+	/* Fan input pins may be used for alternative functions */
+	data->has_fan &= ~sio_data->skip_fan;
+
 	/* Set current fan mode registers and the default settings for the
 	 * other mode registers */
 	for (i = 0; i < 3; i++) {
-- 
cgit v1.2.3-18-g5258


From 8918023d40ebb2c086e77368810763975761cb1b Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:48 +0100
Subject: hwmon: (w83627hf) Drop the force_addr module parameter

This module parameter is there to workaround broken BIOS. I'm not even
sure if it was used in the past 5 years, and it gets in the way of
converting the driver to the MFD infrastructure. So tell the users how
they can do the same from user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>
---
 drivers/hwmon/w83627hf.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 2be28ac4ede..d67407d045b 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -59,10 +59,6 @@ static struct platform_device *pdev;
 #define DRVNAME "w83627hf"
 enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
 
-static u16 force_addr;
-module_param(force_addr, ushort, 0);
-MODULE_PARM_DESC(force_addr,
-		 "Initialize the base address of the sensors");
 static u8 force_i2c = 0x1f;
 module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
@@ -1169,13 +1165,6 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 	}
 
 	superio_select(W83627HF_LD_HWM);
-	force_addr &= WINB_ALIGNMENT;
-	if (force_addr) {
-		printk(KERN_WARNING DRVNAME ": Forcing address 0x%x\n",
-		       force_addr);
-		superio_outb(WINB_BASE_REG, force_addr >> 8);
-		superio_outb(WINB_BASE_REG + 1, force_addr & 0xff);
-	}
 	val = (superio_inb(WINB_BASE_REG) << 8) |
 	       superio_inb(WINB_BASE_REG + 1);
 	*addr = val & WINB_ALIGNMENT;
-- 
cgit v1.2.3-18-g5258


From b72656dbc491484765776a16eeb55ef2e90efea6 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:49 +0100
Subject: hwmon: (w83627hf) Stop using globals for I/O port numbers

Stop using global variables REG and VAL for I/O port numbers. This is
ugly and unsafe.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>
---
 drivers/hwmon/w83627hf.c | 85 ++++++++++++++++++++++++------------------------
 1 file changed, 42 insertions(+), 43 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index d67407d045b..b257c722373 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -59,6 +59,11 @@ static struct platform_device *pdev;
 #define DRVNAME "w83627hf"
 enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
 
+struct w83627hf_sio_data {
+	enum chips type;
+	int sioaddr;
+};
+
 static u8 force_i2c = 0x1f;
 module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
@@ -73,9 +78,7 @@ module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
 /* modified from kernel/include/traps.c */
-static int REG;		/* The register to read/write */
 #define	DEV	0x07	/* Register: Logical device select */
-static int VAL;		/* The value to read/write */
 
 /* logical device numbers for superio_select (below) */
 #define W83627HF_LD_FDC		0x00
@@ -105,37 +108,37 @@ static int VAL;		/* The value to read/write */
 #define W83687THF_VID_DATA	0xF1 /* w83687thf only */
 
 static inline void
-superio_outb(int reg, int val)
+superio_outb(struct w83627hf_sio_data *sio, int reg, int val)
 {
-	outb(reg, REG);
-	outb(val, VAL);
+	outb(reg, sio->sioaddr);
+	outb(val, sio->sioaddr + 1);
 }
 
 static inline int
-superio_inb(int reg)
+superio_inb(struct w83627hf_sio_data *sio, int reg)
 {
-	outb(reg, REG);
-	return inb(VAL);
+	outb(reg, sio->sioaddr);
+	return inb(sio->sioaddr + 1);
 }
 
 static inline void
-superio_select(int ld)
+superio_select(struct w83627hf_sio_data *sio, int ld)
 {
-	outb(DEV, REG);
-	outb(ld, VAL);
+	outb(DEV, sio->sioaddr);
+	outb(ld,  sio->sioaddr + 1);
 }
 
 static inline void
-superio_enter(void)
+superio_enter(struct w83627hf_sio_data *sio)
 {
-	outb(0x87, REG);
-	outb(0x87, REG);
+	outb(0x87, sio->sioaddr);
+	outb(0x87, sio->sioaddr);
 }
 
 static inline void
-superio_exit(void)
+superio_exit(struct w83627hf_sio_data *sio)
 {
-	outb(0xAA, REG);
+	outb(0xAA, sio->sioaddr);
 }
 
 #define W627_DEVID 0x52
@@ -376,10 +379,6 @@ struct w83627hf_data {
 	u8 vrm_ovt;		/* Register value, 627THF/637HF/687THF only */
 };
 
-struct w83627hf_sio_data {
-	enum chips type;
-};
-
 
 static int w83627hf_probe(struct platform_device *pdev);
 static int __devexit w83627hf_remove(struct platform_device *pdev);
@@ -1136,11 +1135,8 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 		"W83687THF",
 	};
 
-	REG = sioaddr;
-	VAL = sioaddr + 1;
-
-	superio_enter();
-	val = force_id ? force_id : superio_inb(DEVID);
+	superio_enter(sio_data);
+	val = force_id ? force_id : superio_inb(sio_data, DEVID);
 	switch (val) {
 	case W627_DEVID:
 		sio_data->type = w83627hf;
@@ -1164,9 +1160,9 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 		goto exit;
 	}
 
-	superio_select(W83627HF_LD_HWM);
-	val = (superio_inb(WINB_BASE_REG) << 8) |
-	       superio_inb(WINB_BASE_REG + 1);
+	superio_select(sio_data, W83627HF_LD_HWM);
+	val = (superio_inb(sio_data, WINB_BASE_REG) << 8) |
+	       superio_inb(sio_data, WINB_BASE_REG + 1);
 	*addr = val & WINB_ALIGNMENT;
 	if (*addr == 0) {
 		printk(KERN_WARNING DRVNAME ": Base address not set, "
@@ -1174,18 +1170,19 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 		goto exit;
 	}
 
-	val = superio_inb(WINB_ACT_REG);
+	val = superio_inb(sio_data, WINB_ACT_REG);
 	if (!(val & 0x01)) {
 		printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n");
-		superio_outb(WINB_ACT_REG, val | 0x01);
+		superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
 	}
 
 	err = 0;
+	sio_data->sioaddr = sioaddr;
 	pr_info(DRVNAME ": Found %s chip at %#x\n",
 		names[sio_data->type], *addr);
 
  exit:
-	superio_exit();
+	superio_exit(sio_data);
 	return err;
 }
 
@@ -1500,20 +1497,21 @@ static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
 
 static int __devinit w83627thf_read_gpio5(struct platform_device *pdev)
 {
+	struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
 	int res = 0xff, sel;
 
-	superio_enter();
-	superio_select(W83627HF_LD_GPIO5);
+	superio_enter(sio_data);
+	superio_select(sio_data, W83627HF_LD_GPIO5);
 
 	/* Make sure these GPIO pins are enabled */
-	if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
+	if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
 		dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
 		goto exit;
 	}
 
 	/* Make sure the pins are configured for input
 	   There must be at least five (VRM 9), and possibly 6 (VRM 10) */
-	sel = superio_inb(W83627THF_GPIO5_IOSR) & 0x3f;
+	sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f;
 	if ((sel & 0x1f) != 0x1f) {
 		dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
 			"function\n");
@@ -1521,37 +1519,38 @@ static int __devinit w83627thf_read_gpio5(struct platform_device *pdev)
 	}
 
 	dev_info(&pdev->dev, "Reading VID from GPIO5\n");
-	res = superio_inb(W83627THF_GPIO5_DR) & sel;
+	res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel;
 
 exit:
-	superio_exit();
+	superio_exit(sio_data);
 	return res;
 }
 
 static int __devinit w83687thf_read_vid(struct platform_device *pdev)
 {
+	struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
 	int res = 0xff;
 
-	superio_enter();
-	superio_select(W83627HF_LD_HWM);
+	superio_enter(sio_data);
+	superio_select(sio_data, W83627HF_LD_HWM);
 
 	/* Make sure these GPIO pins are enabled */
-	if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) {
+	if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) {
 		dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
 		goto exit;
 	}
 
 	/* Make sure the pins are configured for input */
-	if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) {
+	if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) {
 		dev_dbg(&pdev->dev, "VID configured as output, "
 			"no VID function\n");
 		goto exit;
 	}
 
-	res = superio_inb(W83687THF_VID_DATA) & 0x3f;
+	res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f;
 
 exit:
-	superio_exit();
+	superio_exit(sio_data);
 	return res;
 }
 
-- 
cgit v1.2.3-18-g5258


From 4e233cbed249ea94d989b8be08eac0414dbdc44b Mon Sep 17 00:00:00 2001
From: Adrien Demarez <adrien.demarez@bolloretelecom.eu>
Date: Wed, 9 Dec 2009 20:35:50 +0100
Subject: hwmon: New driver for the National Semiconductor LM73

The National Semiconductor LM73 is a single temperature sensor, much
like the famous LM75.

Signed-off-by: Adrien Demarez <adrien.demarez@bolloretelecom.eu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/Kconfig  |   9 +++
 drivers/hwmon/Makefile |   1 +
 drivers/hwmon/lm73.c   | 205 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/hwmon/lm73.c

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 700e93adeb3..87184b5f401 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -442,6 +442,15 @@ config SENSORS_LM70
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm70.
 
+config SENSORS_LM73
+	tristate "National Semiconductor LM73"
+	depends on I2C
+	help
+	  If you say yes here you get support for National Semiconductor LM73
+	  sensor chips.
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm73.
+
 config SENSORS_LM75
 	tristate "National Semiconductor LM75 and compatibles"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 9f46cb019cc..a24a52d12dc 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
 obj-$(CONFIG_SENSORS_LIS3_SPI)	+= lis3lv02d.o lis3lv02d_spi.o
 obj-$(CONFIG_SENSORS_LM63)	+= lm63.o
 obj-$(CONFIG_SENSORS_LM70)	+= lm70.o
+obj-$(CONFIG_SENSORS_LM73)	+= lm73.o
 obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
 obj-$(CONFIG_SENSORS_LM77)	+= lm77.o
 obj-$(CONFIG_SENSORS_LM78)	+= lm78.o
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
new file mode 100644
index 00000000000..0bf8b2a8e9f
--- /dev/null
+++ b/drivers/hwmon/lm73.c
@@ -0,0 +1,205 @@
+/*
+ * LM73 Sensor driver
+ * Based on LM75
+ *
+ * Copyright (C) 2007, CenoSYS (www.cenosys.com).
+ * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu).
+ *
+ * Guillaume Ligneul <guillaume.ligneul@gmail.com>
+ * Adrien Demarez <adrien.demarez@bolloretelecom.eu>
+ * Jeremy Laine <jeremy.laine@bolloretelecom.eu>
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+
+
+/* Addresses scanned */
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c,
+					0x4d, 0x4e, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(lm73);
+
+/* LM73 registers */
+#define LM73_REG_INPUT		0x00
+#define LM73_REG_CONF		0x01
+#define LM73_REG_MAX		0x02
+#define LM73_REG_MIN		0x03
+#define LM73_REG_CTRL		0x04
+#define LM73_REG_ID		0x07
+
+#define LM73_ID			0x9001 /* or 0x190 after a swab16() */
+#define DRVNAME			"lm73"
+#define LM73_TEMP_MIN		(-40)
+#define LM73_TEMP_MAX		150
+
+/*-----------------------------------------------------------------------*/
+
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+			const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct i2c_client *client = to_i2c_client(dev);
+	long temp;
+	short value;
+
+	int status = strict_strtol(buf, 10, &temp);
+	if (status < 0)
+		return status;
+
+	/* Write value */
+	value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
+		(LM73_TEMP_MAX*4)) << 5;
+	i2c_smbus_write_word_data(client, attr->index, swab16(value));
+	return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct i2c_client *client = to_i2c_client(dev);
+	/* use integer division instead of equivalent right shift to
+	   guarantee arithmetic shift and preserve the sign */
+	int temp = ((s16) (swab16(i2c_smbus_read_word_data(client,
+		attr->index)))*250) / 32;
+	return sprintf(buf, "%d\n", temp);
+}
+
+
+/*-----------------------------------------------------------------------*/
+
+/* sysfs attributes for hwmon */
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+			show_temp, set_temp, LM73_REG_MAX);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+			show_temp, set_temp, LM73_REG_MIN);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+			show_temp, NULL, LM73_REG_INPUT);
+
+
+static struct attribute *lm73_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+
+	NULL
+};
+
+static const struct attribute_group lm73_group = {
+	.attrs = lm73_attributes,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* device probe and removal */
+
+static int
+lm73_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *hwmon_dev;
+	int status;
+
+	/* Register sysfs hooks */
+	status = sysfs_create_group(&client->dev.kobj, &lm73_group);
+	if (status)
+		return status;
+
+	hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(hwmon_dev)) {
+		status = PTR_ERR(hwmon_dev);
+		goto exit_remove;
+	}
+	i2c_set_clientdata(client, hwmon_dev);
+
+	dev_info(&client->dev, "%s: sensor '%s'\n",
+		 dev_name(hwmon_dev), client->name);
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &lm73_group);
+	return status;
+}
+
+static int lm73_remove(struct i2c_client *client)
+{
+	struct device *hwmon_dev = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &lm73_group);
+	i2c_set_clientdata(client, NULL);
+	return 0;
+}
+
+static const struct i2c_device_id lm73_ids[] = {
+	{ "lm73", lm73 },
+	{ /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, lm73_ids);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm73_detect(struct i2c_client *new_client, int kind,
+			struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = new_client->adapter;
+	u16 id;
+	u8 ctrl;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+					I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	/* Check device ID */
+	id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
+	ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
+	if ((id != LM73_ID) || (ctrl & 0x10))
+		return -ENODEV;
+
+	strlcpy(info->type, "lm73", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static struct i2c_driver lm73_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm73",
+	},
+	.probe		= lm73_probe,
+	.remove		= lm73_remove,
+	.id_table	= lm73_ids,
+	.detect		= lm73_detect,
+	.address_data	= &addr_data,
+};
+
+/* module glue */
+
+static int __init sensors_lm73_init(void)
+{
+	return i2c_add_driver(&lm73_driver);
+}
+
+static void __exit sensors_lm73_exit(void)
+{
+	i2c_del_driver(&lm73_driver);
+}
+
+MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>");
+MODULE_DESCRIPTION("LM73 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm73_init);
+module_exit(sensors_lm73_exit);
-- 
cgit v1.2.3-18-g5258


From 8007ea35ef88d0d621c6d192ce48ce7289109f39 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:51 +0100
Subject: hwmon: (adm1021) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/adm1021.c | 76 ++++++++++++++++---------------------------------
 1 file changed, 25 insertions(+), 51 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index afc59431812..33acf29531a 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -288,9 +288,8 @@ static int adm1021_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	int i;
-	const char *type_name = "";
-	int conv_rate, status, config;
+	const char *type_name;
+	int conv_rate, status, config, man_id, dev_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		pr_debug("adm1021: detect failed, "
@@ -303,62 +302,37 @@ static int adm1021_detect(struct i2c_client *client, int kind,
 					     ADM1021_REG_CONV_RATE_R);
 	config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R);
 
-	/* Now, we do the remaining detection. */
-	if (kind < 0) {
-		if ((status & 0x03) != 0x00 || (config & 0x3F) != 0x00
-		    || (conv_rate & 0xF8) != 0x00) {
-			pr_debug("adm1021: detect failed, "
-				 "chip not detected!\n");
-			return -ENODEV;
-		}
+	/* Check unused bits */
+	if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) {
+		pr_debug("adm1021: detect failed, chip not detected!\n");
+		return -ENODEV;
 	}
 
 	/* Determine the chip type. */
-	if (kind <= 0) {
-		i = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
-		if (i == 0x41)
-			if ((i2c_smbus_read_byte_data(client,
-					ADM1021_REG_DEV_ID) & 0xF0) == 0x30)
-				kind = adm1023;
-			else
-				kind = adm1021;
-		else if (i == 0x49)
-			kind = thmc10;
-		else if (i == 0x23)
-			kind = gl523sm;
-		else if ((i == 0x4d) &&
-			 (i2c_smbus_read_byte_data(client,
-						   ADM1021_REG_DEV_ID) == 0x01))
-			kind = max1617a;
-		else if (i == 0x54)
-			kind = mc1066;
-		/* LM84 Mfr ID in a different place, and it has more unused bits */
-		else if (conv_rate == 0x00
-			 && (kind == 0 /* skip extra detection */
-			     || ((config & 0x7F) == 0x00
-				 && (status & 0xAB) == 0x00)))
-			kind = lm84;
-		else
-			kind = max1617;
-	}
+	man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
+	dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
 
-	if (kind == max1617) {
-		type_name = "max1617";
-	} else if (kind == max1617a) {
+	if (man_id == 0x4d && dev_id == 0x01)
 		type_name = "max1617a";
-	} else if (kind == adm1021) {
-		type_name = "adm1021";
-	} else if (kind == adm1023) {
-		type_name = "adm1023";
-	} else if (kind == thmc10) {
+	else if (man_id == 0x41) {
+		if ((dev_id & 0xF0) == 0x30)
+			type_name = "adm1023";
+		else
+			type_name = "adm1021";
+	} else if (man_id == 0x49)
 		type_name = "thmc10";
-	} else if (kind == lm84) {
-		type_name = "lm84";
-	} else if (kind == gl523sm) {
+	else if (man_id == 0x23)
 		type_name = "gl523sm";
-	} else if (kind == mc1066) {
+	else if (man_id == 0x54)
 		type_name = "mc1066";
-	}
+	/* LM84 Mfr ID in a different place, and it has more unused bits */
+	else if (conv_rate == 0x00
+		 && (config & 0x7F) == 0x00
+		 && (status & 0xAB) == 0x00)
+		type_name = "lm84";
+	else
+		type_name = "max1617";
+
 	pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
 		 type_name, i2c_adapter_id(adapter), client->addr);
 	strlcpy(info->type, type_name, I2C_NAME_SIZE);
-- 
cgit v1.2.3-18-g5258


From 9560672369098b021688421f45476ce0c8bc451b Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:51 +0100
Subject: hwmon: (adm1025) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/adm1025.c | 73 ++++++++++++++-----------------------------------
 1 file changed, 20 insertions(+), 53 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 4db04d603ec..db6ac2b04f6 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -2,7 +2,7 @@
  * adm1025.c
  *
  * Copyright (C) 2000       Chen-Yuan Wu <gwu@esoft.com>
- * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>
  *
  * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
  * voltages (including its own power source) and up to two temperatures
@@ -413,67 +413,34 @@ static int adm1025_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	const char *name = "";
-	u8 config;
+	const char *name;
+	u8 man_id, chip_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	/*
-	 * Now we do the remaining detection. A negative kind means that
-	 * the driver was loaded with no force parameter (default), so we
-	 * must both detect and identify the chip. A zero kind means that
-	 * the driver was loaded with the force parameter, the detection
-	 * step shall be skipped. A positive kind means that the driver
-	 * was loaded with the force parameter and a given kind of chip is
-	 * requested, so both the detection and the identification steps
-	 * are skipped.
-	 */
-	config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
-	if (kind < 0) { /* detection */
-		if ((config & 0x80) != 0x00
-		 || (i2c_smbus_read_byte_data(client,
-		     ADM1025_REG_STATUS1) & 0xC0) != 0x00
-		 || (i2c_smbus_read_byte_data(client,
-		     ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
-			dev_dbg(&adapter->dev,
-				"ADM1025 detection failed at 0x%02x.\n",
-				client->addr);
-			return -ENODEV;
-		}
+	/* Check for unused bits */
+	if ((i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG) & 0x80)
+	 || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS1) & 0xC0)
+	 || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS2) & 0xBC)) {
+		dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x\n",
+			client->addr);
+		return -ENODEV;
 	}
 
-	if (kind <= 0) { /* identification */
-		u8 man_id, chip_id;
-
-		man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
-		chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
-
-		if (man_id == 0x41) { /* Analog Devices */
-			if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
-				kind = adm1025;
-			}
-		} else
-		if (man_id == 0xA1) { /* Philips */
-			if (client->addr != 0x2E
-			 && (chip_id & 0xF0) == 0x20) { /* NE1619 */
-				kind = ne1619;
-			}
-		}
-
-		if (kind <= 0) { /* identification failed */
-			dev_info(&adapter->dev,
-			    "Unsupported chip (man_id=0x%02X, "
-			    "chip_id=0x%02X).\n", man_id, chip_id);
-			return -ENODEV;
-		}
-	}
+	/* Identification */
+	chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
+	if ((chip_id & 0xF0) != 0x20)
+		return -ENODEV;
 
-	if (kind == adm1025) {
+	man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
+	if (man_id == 0x41)
 		name = "adm1025";
-	} else if (kind == ne1619) {
+	else if (man_id == 0xA1 && client->addr != 0x2E)
 		name = "ne1619";
-	}
+	else
+		return -ENODEV;
+
 	strlcpy(info->type, name, I2C_NAME_SIZE);
 
 	return 0;
-- 
cgit v1.2.3-18-g5258


From 747d9bedc3d1e42900bf2bb1669f46e4fd0c8957 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:52 +0100
Subject: hwmon: (lm77) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/lm77.c | 80 +++++++++++++++++++++++++---------------------------
 1 file changed, 39 insertions(+), 41 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 866b401ab6e..ac067fd1948 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -249,6 +249,7 @@ static int lm77_detect(struct i2c_client *new_client, int kind,
 		       struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
+	int i, cur, conf, hyst, crit, min, max;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
@@ -265,51 +266,48 @@ static int lm77_detect(struct i2c_client *new_client, int kind,
 	   4. registers cycling over 8-address boundaries
 
 	   Word-sized registers are high-byte first. */
-	if (kind < 0) {
-		int i, cur, conf, hyst, crit, min, max;
-
-		/* addresses cycling */
-		cur = i2c_smbus_read_word_data(new_client, 0);
-		conf = i2c_smbus_read_byte_data(new_client, 1);
-		hyst = i2c_smbus_read_word_data(new_client, 2);
-		crit = i2c_smbus_read_word_data(new_client, 3);
-		min = i2c_smbus_read_word_data(new_client, 4);
-		max = i2c_smbus_read_word_data(new_client, 5);
-		for (i = 8; i <= 0xff; i += 8)
-			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
-			    || i2c_smbus_read_word_data(new_client, i + 2) != hyst
-			    || i2c_smbus_read_word_data(new_client, i + 3) != crit
-			    || i2c_smbus_read_word_data(new_client, i + 4) != min
-			    || i2c_smbus_read_word_data(new_client, i + 5) != max)
-				return -ENODEV;
-
-		/* sign bits */
-		if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
-		    || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0)
-		    || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
-		    || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
-		    || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
-			return -ENODEV;
 
-		/* unused bits */
-		if (conf & 0xe0)
+	/* addresses cycling */
+	cur = i2c_smbus_read_word_data(new_client, 0);
+	conf = i2c_smbus_read_byte_data(new_client, 1);
+	hyst = i2c_smbus_read_word_data(new_client, 2);
+	crit = i2c_smbus_read_word_data(new_client, 3);
+	min = i2c_smbus_read_word_data(new_client, 4);
+	max = i2c_smbus_read_word_data(new_client, 5);
+	for (i = 8; i <= 0xff; i += 8) {
+		if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+		 || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+		 || i2c_smbus_read_word_data(new_client, i + 3) != crit
+		 || i2c_smbus_read_word_data(new_client, i + 4) != min
+		 || i2c_smbus_read_word_data(new_client, i + 5) != max)
 			return -ENODEV;
+	}
 
-		/* 0x06 and 0x07 return the last read value */
-		cur = i2c_smbus_read_word_data(new_client, 0);
-		if (i2c_smbus_read_word_data(new_client, 6) != cur
-		    || i2c_smbus_read_word_data(new_client, 7) != cur)
-			return -ENODEV;
-		hyst = i2c_smbus_read_word_data(new_client, 2);
-		if (i2c_smbus_read_word_data(new_client, 6) != hyst
-		    || i2c_smbus_read_word_data(new_client, 7) != hyst)
-			return -ENODEV;
-		min = i2c_smbus_read_word_data(new_client, 4);
-		if (i2c_smbus_read_word_data(new_client, 6) != min
-		    || i2c_smbus_read_word_data(new_client, 7) != min)
-			return -ENODEV;
+	/* sign bits */
+	if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
+	 || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0)
+	 || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
+	 || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
+	 || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
+		return -ENODEV;
 
-	}
+	/* unused bits */
+	if (conf & 0xe0)
+		return -ENODEV;
+
+	/* 0x06 and 0x07 return the last read value */
+	cur = i2c_smbus_read_word_data(new_client, 0);
+	if (i2c_smbus_read_word_data(new_client, 6) != cur
+	 || i2c_smbus_read_word_data(new_client, 7) != cur)
+		return -ENODEV;
+	hyst = i2c_smbus_read_word_data(new_client, 2);
+	if (i2c_smbus_read_word_data(new_client, 6) != hyst
+	 || i2c_smbus_read_word_data(new_client, 7) != hyst)
+		return -ENODEV;
+	min = i2c_smbus_read_word_data(new_client, 4);
+	if (i2c_smbus_read_word_data(new_client, 6) != min
+	 || i2c_smbus_read_word_data(new_client, 7) != min)
+		return -ENODEV;
 
 	strlcpy(info->type, "lm77", I2C_NAME_SIZE);
 
-- 
cgit v1.2.3-18-g5258


From b57dc3940a70a2c2460b628567a3cc76efe725f2 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:52 +0100
Subject: hwmon: (lm83) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/lm83.c | 81 +++++++++++++++++-----------------------------------
 1 file changed, 26 insertions(+), 55 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index e59e2d1f080..08b03e6ed0b 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -1,7 +1,7 @@
 /*
  * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
  *          monitoring
- * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>
  *
  * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
  * a sensor chip made by National Semiconductor. It reports up to four
@@ -295,69 +295,40 @@ static int lm83_detect(struct i2c_client *new_client, int kind,
 		       struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
-	const char *name = "";
+	const char *name;
+	u8 man_id, chip_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	/* Now we do the detection and identification. A negative kind
-	 * means that the driver was loaded with no force parameter
-	 * (default), so we must both detect and identify the chip
-	 * (actually there is only one possible kind of chip for now, LM83).
-	 * A zero kind means that the driver was loaded with the force
-	 * parameter, the detection step shall be skipped. A positive kind
-	 * means that the driver was loaded with the force parameter and a
-	 * given kind of chip is requested, so both the detection and the
-	 * identification steps are skipped. */
-
-	/* Default to an LM83 if forced */
-	if (kind == 0)
-		kind = lm83;
-
-	if (kind < 0) { /* detection */
-		if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
-		    & 0xA8) != 0x00) ||
-		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
-		    & 0x48) != 0x00) ||
-		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
-		    & 0x41) != 0x00)) {
-			dev_dbg(&adapter->dev,
-				"LM83 detection failed at 0x%02x.\n",
-				new_client->addr);
-			return -ENODEV;
-		}
+	/* Detection */
+	if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) ||
+	    (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) ||
+	    (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) {
+		dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n",
+			new_client->addr);
+		return -ENODEV;
 	}
 
-	if (kind <= 0) { /* identification */
-		u8 man_id, chip_id;
-
-		man_id = i2c_smbus_read_byte_data(new_client,
-		    LM83_REG_R_MAN_ID);
-		chip_id = i2c_smbus_read_byte_data(new_client,
-		    LM83_REG_R_CHIP_ID);
-
-		if (man_id == 0x01) { /* National Semiconductor */
-			if (chip_id == 0x03) {
-				kind = lm83;
-			} else
-			if (chip_id == 0x01) {
-				kind = lm82;
-			}
-		}
-
-		if (kind <= 0) { /* identification failed */
-			dev_info(&adapter->dev,
-			    "Unsupported chip (man_id=0x%02X, "
-			    "chip_id=0x%02X).\n", man_id, chip_id);
-			return -ENODEV;
-		}
-	}
+	/* Identification */
+	man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID);
+	if (man_id != 0x01)	/* National Semiconductor */
+		return -ENODEV;
 
-	if (kind == lm83) {
+	chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID);
+	switch (chip_id) {
+	case 0x03:
 		name = "lm83";
-	} else
-	if (kind == lm82) {
+		break;
+	case 0x01:
 		name = "lm82";
+		break;
+	default:
+		/* identification failed */
+		dev_info(&adapter->dev,
+			 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+			 man_id, chip_id);
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, name, I2C_NAME_SIZE);
-- 
cgit v1.2.3-18-g5258


From d42a2eb5ad9766fac96f27af93b1634e4ffde220 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:53 +0100
Subject: hwmon: (lm85) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/lm85.c | 157 +++++++++++++++++++++------------------------------
 1 file changed, 65 insertions(+), 92 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 6c53d987de1..d56da2e7470 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -5,7 +5,7 @@
     Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
     Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
     Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
-    Copyright (C) 2007, 2008  Jean Delvare <khali@linux-fr.org>
+    Copyright (C) 2007--2009  Jean Delvare <khali@linux-fr.org>
 
     Chip details at	      <http://www.national.com/ds/LM/LM85.pdf>
 
@@ -1162,107 +1162,80 @@ static int lm85_detect(struct i2c_client *client, int kind,
 	struct i2c_adapter *adapter = client->adapter;
 	int address = client->addr;
 	const char *type_name;
+	int company, verstep;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		/* We need to be able to do byte I/O */
 		return -ENODEV;
 	}
 
-	/* If auto-detecting, determine the chip type */
-	if (kind < 0) {
-		int company = lm85_read_value(client, LM85_REG_COMPANY);
-		int verstep = lm85_read_value(client, LM85_REG_VERSTEP);
-
-		dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
-			"COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
-			address, company, verstep);
-
-		/* All supported chips have the version in common */
-		if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
-		    (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
-			dev_dbg(&adapter->dev, "Autodetection failed: "
-				"unsupported version\n");
-			return -ENODEV;
-		}
-		kind = any_chip;
-
-		/* Now, refine the detection */
-		if (company == LM85_COMPANY_NATIONAL) {
-			switch (verstep) {
-			case LM85_VERSTEP_LM85C:
-				kind = lm85c;
-				break;
-			case LM85_VERSTEP_LM85B:
-				kind = lm85b;
-				break;
-			case LM85_VERSTEP_LM96000_1:
-			case LM85_VERSTEP_LM96000_2:
-				/* Check for Winbond WPCD377I */
-				if (lm85_is_fake(client)) {
-					dev_dbg(&adapter->dev,
-						"Found Winbond WPCD377I, "
-						"ignoring\n");
-					return -ENODEV;
-				}
-				break;
-			}
-		} else if (company == LM85_COMPANY_ANALOG_DEV) {
-			switch (verstep) {
-			case LM85_VERSTEP_ADM1027:
-				kind = adm1027;
-				break;
-			case LM85_VERSTEP_ADT7463:
-			case LM85_VERSTEP_ADT7463C:
-				kind = adt7463;
-				break;
-			case LM85_VERSTEP_ADT7468_1:
-			case LM85_VERSTEP_ADT7468_2:
-				kind = adt7468;
-				break;
-			}
-		} else if (company == LM85_COMPANY_SMSC) {
-			switch (verstep) {
-			case LM85_VERSTEP_EMC6D100_A0:
-			case LM85_VERSTEP_EMC6D100_A1:
-				/* Note: we can't tell a '100 from a '101 */
-				kind = emc6d100;
-				break;
-			case LM85_VERSTEP_EMC6D102:
-				kind = emc6d102;
-				break;
+	/* Determine the chip type */
+	company = lm85_read_value(client, LM85_REG_COMPANY);
+	verstep = lm85_read_value(client, LM85_REG_VERSTEP);
+
+	dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
+		"COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+		address, company, verstep);
+
+	/* All supported chips have the version in common */
+	if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+	    (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
+		dev_dbg(&adapter->dev,
+			"Autodetection failed: unsupported version\n");
+		return -ENODEV;
+	}
+	type_name = "lm85";
+
+	/* Now, refine the detection */
+	if (company == LM85_COMPANY_NATIONAL) {
+		switch (verstep) {
+		case LM85_VERSTEP_LM85C:
+			type_name = "lm85c";
+			break;
+		case LM85_VERSTEP_LM85B:
+			type_name = "lm85b";
+			break;
+		case LM85_VERSTEP_LM96000_1:
+		case LM85_VERSTEP_LM96000_2:
+			/* Check for Winbond WPCD377I */
+			if (lm85_is_fake(client)) {
+				dev_dbg(&adapter->dev,
+					"Found Winbond WPCD377I, ignoring\n");
+				return -ENODEV;
 			}
-		} else {
-			dev_dbg(&adapter->dev, "Autodetection failed: "
-				"unknown vendor\n");
-			return -ENODEV;
+			break;
+		}
+	} else if (company == LM85_COMPANY_ANALOG_DEV) {
+		switch (verstep) {
+		case LM85_VERSTEP_ADM1027:
+			type_name = "adm1027";
+			break;
+		case LM85_VERSTEP_ADT7463:
+		case LM85_VERSTEP_ADT7463C:
+			type_name = "adt7463";
+			break;
+		case LM85_VERSTEP_ADT7468_1:
+		case LM85_VERSTEP_ADT7468_2:
+			type_name = "adt7468";
+			break;
 		}
+	} else if (company == LM85_COMPANY_SMSC) {
+		switch (verstep) {
+		case LM85_VERSTEP_EMC6D100_A0:
+		case LM85_VERSTEP_EMC6D100_A1:
+			/* Note: we can't tell a '100 from a '101 */
+			type_name = "emc6d100";
+			break;
+		case LM85_VERSTEP_EMC6D102:
+			type_name = "emc6d102";
+			break;
+		}
+	} else {
+		dev_dbg(&adapter->dev,
+			"Autodetection failed: unknown vendor\n");
+		return -ENODEV;
 	}
 
-	switch (kind) {
-	case lm85b:
-		type_name = "lm85b";
-		break;
-	case lm85c:
-		type_name = "lm85c";
-		break;
-	case adm1027:
-		type_name = "adm1027";
-		break;
-	case adt7463:
-		type_name = "adt7463";
-		break;
-	case adt7468:
-		type_name = "adt7468";
-		break;
-	case emc6d100:
-		type_name = "emc6d100";
-		break;
-	case emc6d102:
-		type_name = "emc6d102";
-		break;
-	default:
-		type_name = "lm85";
-	}
 	strlcpy(info->type, type_name, I2C_NAME_SIZE);
 
 	return 0;
-- 
cgit v1.2.3-18-g5258


From 8f2fa77c53ba8c10696143c21b4111d449c85fb2 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:53 +0100
Subject: hwmon: (lm90) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/lm90.c | 228 ++++++++++++++++++++++-----------------------------
 1 file changed, 96 insertions(+), 132 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 1aff7575799..b7c905f50ed 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1,7 +1,7 @@
 /*
  * lm90.c - Part of lm_sensors, Linux kernel modules for hardware
  *          monitoring
- * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>
  *
  * Based on the lm83 driver. The LM90 is a sensor chip made by National
  * Semiconductor. It reports up to two temperatures (its own plus up to
@@ -661,154 +661,118 @@ static int lm90_detect(struct i2c_client *new_client, int kind,
 {
 	struct i2c_adapter *adapter = new_client->adapter;
 	int address = new_client->addr;
-	const char *name = "";
+	const char *name = NULL;
+	int man_id, chip_id, reg_config1, reg_convrate;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	/*
-	 * Now we do the remaining detection. A negative kind means that
-	 * the driver was loaded with no force parameter (default), so we
-	 * must both detect and identify the chip. A zero kind means that
-	 * the driver was loaded with the force parameter, the detection
-	 * step shall be skipped. A positive kind means that the driver
-	 * was loaded with the force parameter and a given kind of chip is
-	 * requested, so both the detection and the identification steps
-	 * are skipped.
-	 */
-
-	/* Default to an LM90 if forced */
-	if (kind == 0)
-		kind = lm90;
-
-	if (kind < 0) { /* detection and identification */
-		int man_id, chip_id, reg_config1, reg_convrate;
-
-		if ((man_id = i2c_smbus_read_byte_data(new_client,
+	/* detection and identification */
+	if ((man_id = i2c_smbus_read_byte_data(new_client,
 						LM90_REG_R_MAN_ID)) < 0
-		 || (chip_id = i2c_smbus_read_byte_data(new_client,
+	 || (chip_id = i2c_smbus_read_byte_data(new_client,
 						LM90_REG_R_CHIP_ID)) < 0
-		 || (reg_config1 = i2c_smbus_read_byte_data(new_client,
+	 || (reg_config1 = i2c_smbus_read_byte_data(new_client,
 						LM90_REG_R_CONFIG1)) < 0
-		 || (reg_convrate = i2c_smbus_read_byte_data(new_client,
+	 || (reg_convrate = i2c_smbus_read_byte_data(new_client,
 						LM90_REG_R_CONVRATE)) < 0)
+		return -ENODEV;
+
+	if ((address == 0x4C || address == 0x4D)
+	 && man_id == 0x01) { /* National Semiconductor */
+		int reg_config2;
+
+		reg_config2 = i2c_smbus_read_byte_data(new_client,
+						LM90_REG_R_CONFIG2);
+		if (reg_config2 < 0)
 			return -ENODEV;
-		
-		if ((address == 0x4C || address == 0x4D)
-		 && man_id == 0x01) { /* National Semiconductor */
-			int reg_config2;
-
-			if ((reg_config2 = i2c_smbus_read_byte_data(new_client,
-						LM90_REG_R_CONFIG2)) < 0)
-				return -ENODEV;
-
-			if ((reg_config1 & 0x2A) == 0x00
-			 && (reg_config2 & 0xF8) == 0x00
-			 && reg_convrate <= 0x09) {
-				if (address == 0x4C
-				 && (chip_id & 0xF0) == 0x20) { /* LM90 */
-					kind = lm90;
-				} else
-				if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
-					kind = lm99;
-					dev_info(&adapter->dev,
-						 "Assuming LM99 chip at "
-						 "0x%02x\n", address);
-					dev_info(&adapter->dev,
-						 "If it is an LM89, pass "
-						 "force_lm86=%d,0x%02x when "
-						 "loading the lm90 driver\n",
-						 i2c_adapter_id(adapter),
-						 address);
-				} else
-				if (address == 0x4C
-				 && (chip_id & 0xF0) == 0x10) { /* LM86 */
-					kind = lm86;
-				}
-			}
-		} else
-		if ((address == 0x4C || address == 0x4D)
-		 && man_id == 0x41) { /* Analog Devices */
-			if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
-			 && (reg_config1 & 0x3F) == 0x00
-			 && reg_convrate <= 0x0A) {
-				kind = adm1032;
-			} else
-			if (chip_id == 0x51 /* ADT7461 */
-			 && (reg_config1 & 0x1B) == 0x00
-			 && reg_convrate <= 0x0A) {
-				kind = adt7461;
-			}
-		} else
-		if (man_id == 0x4D) { /* Maxim */
-			/*
-			 * The MAX6657, MAX6658 and MAX6659 do NOT have a
-			 * chip_id register. Reading from that address will
-			 * return the last read value, which in our case is
-			 * those of the man_id register. Likewise, the config1
-			 * register seems to lack a low nibble, so the value
-			 * will be those of the previous read, so in our case
-			 * those of the man_id register.
-			 */
-			if (chip_id == man_id
-			 && (address == 0x4C || address == 0x4D)
-			 && (reg_config1 & 0x1F) == (man_id & 0x0F)
-			 && reg_convrate <= 0x09) {
-			 	kind = max6657;
+
+		if ((reg_config1 & 0x2A) == 0x00
+		 && (reg_config2 & 0xF8) == 0x00
+		 && reg_convrate <= 0x09) {
+			if (address == 0x4C
+			 && (chip_id & 0xF0) == 0x20) { /* LM90 */
+				name = "lm90";
 			} else
-			/* The chip_id register of the MAX6680 and MAX6681
-			 * holds the revision of the chip.
-			 * the lowest bit of the config1 register is unused
-			 * and should return zero when read, so should the
-			 * second to last bit of config1 (software reset)
-			 */
-			if (chip_id == 0x01
-			 && (reg_config1 & 0x03) == 0x00
-			 && reg_convrate <= 0x07) {
-			 	kind = max6680;
+			if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
+				name = "lm99";
+				dev_info(&adapter->dev,
+					 "Assuming LM99 chip at 0x%02x\n",
+					 address);
+				dev_info(&adapter->dev,
+					 "If it is an LM89, instantiate it "
+					 "with the new_device sysfs "
+					 "interface\n");
 			} else
-			/* The chip_id register of the MAX6646/6647/6649
-			 * holds the revision of the chip.
-			 * The lowest 6 bits of the config1 register are
-			 * unused and should return zero when read.
-			 */
-			if (chip_id == 0x59
-			 && (reg_config1 & 0x3f) == 0x00
-			 && reg_convrate <= 0x07) {
-				kind = max6646;
+			if (address == 0x4C
+			 && (chip_id & 0xF0) == 0x10) { /* LM86 */
+				name = "lm86";
 			}
 		}
-
-		if (kind <= 0) { /* identification failed */
-			dev_dbg(&adapter->dev,
-				"Unsupported chip at 0x%02x (man_id=0x%02X, "
-				"chip_id=0x%02X)\n", address, man_id, chip_id);
-			return -ENODEV;
+	} else
+	if ((address == 0x4C || address == 0x4D)
+	 && man_id == 0x41) { /* Analog Devices */
+		if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
+		 && (reg_config1 & 0x3F) == 0x00
+		 && reg_convrate <= 0x0A) {
+			name = "adm1032";
+			/* The ADM1032 supports PEC, but only if combined
+			   transactions are not used. */
+			if (i2c_check_functionality(adapter,
+						    I2C_FUNC_SMBUS_BYTE))
+				info->flags |= I2C_CLIENT_PEC;
+		} else
+		if (chip_id == 0x51 /* ADT7461 */
+		 && (reg_config1 & 0x1B) == 0x00
+		 && reg_convrate <= 0x0A) {
+			name = "adt7461";
+		}
+	} else
+	if (man_id == 0x4D) { /* Maxim */
+		/*
+		 * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
+		 * register. Reading from that address will return the last
+		 * read value, which in our case is those of the man_id
+		 * register. Likewise, the config1 register seems to lack a
+		 * low nibble, so the value will be those of the previous
+		 * read, so in our case those of the man_id register.
+		 */
+		if (chip_id == man_id
+		 && (address == 0x4C || address == 0x4D)
+		 && (reg_config1 & 0x1F) == (man_id & 0x0F)
+		 && reg_convrate <= 0x09) {
+			name = "max6657";
+		} else
+		/*
+		 * The chip_id register of the MAX6680 and MAX6681 holds the
+		 * revision of the chip. The lowest bit of the config1 register
+		 * is unused and should return zero when read, so should the
+		 * second to last bit of config1 (software reset).
+		 */
+		if (chip_id == 0x01
+		 && (reg_config1 & 0x03) == 0x00
+		 && reg_convrate <= 0x07) {
+			name = "max6680";
+		} else
+		/*
+		 * The chip_id register of the MAX6646/6647/6649 holds the
+		 * revision of the chip. The lowest 6 bits of the config1
+		 * register are unused and should return zero when read.
+		 */
+		if (chip_id == 0x59
+		 && (reg_config1 & 0x3f) == 0x00
+		 && reg_convrate <= 0x07) {
+			name = "max6646";
 		}
 	}
 
-	/* Fill the i2c board info */
-	if (kind == lm90) {
-		name = "lm90";
-	} else if (kind == adm1032) {
-		name = "adm1032";
-		/* The ADM1032 supports PEC, but only if combined
-		   transactions are not used. */
-		if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
-			info->flags |= I2C_CLIENT_PEC;
-	} else if (kind == lm99) {
-		name = "lm99";
-	} else if (kind == lm86) {
-		name = "lm86";
-	} else if (kind == max6657) {
-		name = "max6657";
-	} else if (kind == max6680) {
-		name = "max6680";
-	} else if (kind == adt7461) {
-		name = "adt7461";
-	} else if (kind == max6646) {
-		name = "max6646";
+	if (!name) { /* identification failed */
+		dev_dbg(&adapter->dev,
+			"Unsupported chip at 0x%02x (man_id=0x%02X, "
+			"chip_id=0x%02X)\n", address, man_id, chip_id);
+		return -ENODEV;
 	}
+
 	strlcpy(info->type, name, I2C_NAME_SIZE);
 
 	return 0;
-- 
cgit v1.2.3-18-g5258


From dbe73c8f454a40de06039ec97bc0272f41f1d3c7 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:54 +0100
Subject: hwmon: (tmp401/tmp421) Clean up detect functions

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Andre Prendel <andre.prendel@gmx.de>
---
 drivers/hwmon/tmp401.c | 55 ++++++++++++++++++++++++--------------------------
 drivers/hwmon/tmp421.c | 45 +++++++++++++++++++----------------------
 2 files changed, 47 insertions(+), 53 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index 7b34f2cd08b..ee9673467c4 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -488,46 +488,43 @@ static void tmp401_init_client(struct i2c_client *client)
 		i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
 }
 
-static int tmp401_detect(struct i2c_client *client, int kind,
+static int tmp401_detect(struct i2c_client *client, int _kind,
 			 struct i2c_board_info *info)
 {
+	enum chips kind;
 	struct i2c_adapter *adapter = client->adapter;
+	u8 reg;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
 	/* Detect and identify the chip */
-	if (kind <= 0) {
-		u8 reg;
-
-		reg = i2c_smbus_read_byte_data(client,
-					       TMP401_MANUFACTURER_ID_REG);
-		if (reg != TMP401_MANUFACTURER_ID)
-			return -ENODEV;
-
-		reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
-
-		switch (reg) {
-		case TMP401_DEVICE_ID:
-			kind = tmp401;
-			break;
-		case TMP411_DEVICE_ID:
-			kind = tmp411;
-			break;
-		default:
-			return -ENODEV;
-		}
+	reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
+	if (reg != TMP401_MANUFACTURER_ID)
+		return -ENODEV;
 
-		reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
-		if (reg & 0x1b)
-			return -ENODEV;
+	reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
 
-		reg = i2c_smbus_read_byte_data(client,
-					       TMP401_CONVERSION_RATE_READ);
-		/* Datasheet says: 0x1-0x6 */
-		if (reg > 15)
-			return -ENODEV;
+	switch (reg) {
+	case TMP401_DEVICE_ID:
+		kind = tmp401;
+		break;
+	case TMP411_DEVICE_ID:
+		kind = tmp411;
+		break;
+	default:
+		return -ENODEV;
 	}
+
+	reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+	if (reg & 0x1b)
+		return -ENODEV;
+
+	reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
+	/* Datasheet says: 0x1-0x6 */
+	if (reg > 15)
+		return -ENODEV;
+
 	strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 20924343431..bb5464a289c 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -223,39 +223,36 @@ static int tmp421_init_client(struct i2c_client *client)
 	return 0;
 }
 
-static int tmp421_detect(struct i2c_client *client, int kind,
+static int tmp421_detect(struct i2c_client *client, int _kind,
 			 struct i2c_board_info *info)
 {
+	enum chips kind;
 	struct i2c_adapter *adapter = client->adapter;
 	const char *names[] = { "TMP421", "TMP422", "TMP423" };
+	u8 reg;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind <= 0) {
-		u8 reg;
-
-		reg = i2c_smbus_read_byte_data(client,
-					       TMP421_MANUFACTURER_ID_REG);
-		if (reg != TMP421_MANUFACTURER_ID)
-			return -ENODEV;
-
-		reg = i2c_smbus_read_byte_data(client,
-					       TMP421_DEVICE_ID_REG);
-		switch (reg) {
-		case TMP421_DEVICE_ID:
-			kind = tmp421;
-			break;
-		case TMP422_DEVICE_ID:
-			kind = tmp422;
-			break;
-		case TMP423_DEVICE_ID:
-			kind = tmp423;
-			break;
-		default:
-			return -ENODEV;
-		}
+	reg = i2c_smbus_read_byte_data(client, TMP421_MANUFACTURER_ID_REG);
+	if (reg != TMP421_MANUFACTURER_ID)
+		return -ENODEV;
+
+	reg = i2c_smbus_read_byte_data(client, TMP421_DEVICE_ID_REG);
+	switch (reg) {
+	case TMP421_DEVICE_ID:
+		kind = tmp421;
+		break;
+	case TMP422_DEVICE_ID:
+		kind = tmp422;
+		break;
+	case TMP423_DEVICE_ID:
+		kind = tmp423;
+		break;
+	default:
+		return -ENODEV;
 	}
+
 	strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE);
 	dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n",
 		 names[kind - 1], client->addr);
-- 
cgit v1.2.3-18-g5258


From bab2bf44f80a5749fdf69f854247e912353142b2 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:54 +0100
Subject: hwmon: (w83781d) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/w83781d.c | 131 ++++++++++++++++++++----------------------------
 1 file changed, 53 insertions(+), 78 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d27ed1bac00..7ab7967da0a 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1054,11 +1054,11 @@ static int
 w83781d_detect(struct i2c_client *client, int kind,
 	       struct i2c_board_info *info)
 {
-	int val1 = 0, val2;
+	int val1, val2;
 	struct w83781d_data *isa = w83781d_data_if_isa();
 	struct i2c_adapter *adapter = client->adapter;
 	int address = client->addr;
-	const char *client_name = "";
+	const char *client_name;
 	enum vendor { winbond, asus } vendid;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -1070,98 +1070,73 @@ w83781d_detect(struct i2c_client *client, int kind,
 	if (isa)
 		mutex_lock(&isa->update_lock);
 
-	/* The w8378?d may be stuck in some other bank than bank 0. This may
-	   make reading other information impossible. Specify a force=... or
-	   force_*=... parameter, and the Winbond will be reset to the right
-	   bank. */
-	if (kind < 0) {
-		if (i2c_smbus_read_byte_data
-		    (client, W83781D_REG_CONFIG) & 0x80) {
-			dev_dbg(&adapter->dev, "Detection of w83781d chip "
-				"failed at step 3\n");
-			goto err_nodev;
-		}
-		val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
-		val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
-		/* Check for Winbond or Asus ID if in bank 0 */
-		if ((!(val1 & 0x07)) &&
-		    (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
-		     || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
-			dev_dbg(&adapter->dev, "Detection of w83781d chip "
-				"failed at step 4\n");
+	if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
+		dev_dbg(&adapter->dev,
+			"Detection of w83781d chip failed at step 3\n");
+		goto err_nodev;
+	}
+
+	val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
+	val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+	/* Check for Winbond or Asus ID if in bank 0 */
+	if (!(val1 & 0x07) &&
+	    ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
+	     ( (val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
+		dev_dbg(&adapter->dev,
+			"Detection of w83781d chip failed at step 4\n");
+		goto err_nodev;
+	}
+	/* If Winbond SMBus, check address at 0x48.
+	   Asus doesn't support, except for as99127f rev.2 */
+	if ((!(val1 & 0x80) && val2 == 0xa3) ||
+	    ( (val1 & 0x80) && val2 == 0x5c)) {
+		if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
+		    != address) {
+			dev_dbg(&adapter->dev,
+				"Detection of w83781d chip failed at step 5\n");
 			goto err_nodev;
 		}
-		/* If Winbond SMBus, check address at 0x48.
-		   Asus doesn't support, except for as99127f rev.2 */
-		if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
-		    ((val1 & 0x80) && (val2 == 0x5c))) {
-			if (i2c_smbus_read_byte_data
-			    (client, W83781D_REG_I2C_ADDR) != address) {
-				dev_dbg(&adapter->dev, "Detection of w83781d "
-					"chip failed at step 5\n");
-				goto err_nodev;
-			}
-		}
 	}
 
-	/* We have either had a force parameter, or we have already detected the
-	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
+	/* Put it now into bank 0 and Vendor ID High Byte */
 	i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
 		(i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
 		 & 0x78) | 0x80);
 
-	/* Determine the chip type. */
-	if (kind <= 0) {
-		/* get vendor ID */
-		val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
-		if (val2 == 0x5c)
-			vendid = winbond;
-		else if (val2 == 0x12)
-			vendid = asus;
-		else {
-			dev_dbg(&adapter->dev, "w83781d chip vendor is "
-				"neither Winbond nor Asus\n");
-			goto err_nodev;
-		}
-
-		val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
-		if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
-			kind = w83781d;
-		else if (val1 == 0x30 && vendid == winbond)
-			kind = w83782d;
-		else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
-			kind = w83783s;
-		else if (val1 == 0x31)
-			kind = as99127f;
-		else {
-			if (kind == 0)
-				dev_warn(&adapter->dev, "Ignoring 'force' "
-					 "parameter for unknown chip at "
-					 "address 0x%02x\n", address);
-			goto err_nodev;
-		}
-
-		if ((kind == w83781d || kind == w83782d)
-		 && w83781d_alias_detect(client, val1)) {
-			dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
-				"be the same as ISA device\n", address);
-			goto err_nodev;
-		}
+	/* Get the vendor ID */
+	val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+	if (val2 == 0x5c)
+		vendid = winbond;
+	else if (val2 == 0x12)
+		vendid = asus;
+	else {
+		dev_dbg(&adapter->dev,
+			"w83781d chip vendor is neither Winbond nor Asus\n");
+		goto err_nodev;
 	}
 
-	if (isa)
-		mutex_unlock(&isa->update_lock);
-
-	if (kind == w83781d) {
+	/* Determine the chip type. */
+	val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
+	if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
 		client_name = "w83781d";
-	} else if (kind == w83782d) {
+	else if (val1 == 0x30 && vendid == winbond)
 		client_name = "w83782d";
-	} else if (kind == w83783s) {
+	else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
 		client_name = "w83783s";
-	} else if (kind == as99127f) {
+	else if (val1 == 0x31)
 		client_name = "as99127f";
+	else
+		goto err_nodev;
+
+	if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
+		dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+			"be the same as ISA device\n", address);
+		goto err_nodev;
 	}
 
+	if (isa)
+		mutex_unlock(&isa->update_lock);
+
 	strlcpy(info->type, client_name, I2C_NAME_SIZE);
 
 	return 0;
-- 
cgit v1.2.3-18-g5258


From 3f8b845940c8344e88123bead66b5a871e6366df Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:55 +0100
Subject: hwmon: (w83791d) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Marc Hulsman <m.hulsman@tudelft.nl>
---
 drivers/hwmon/w83791d.c | 60 +++++++++++++++----------------------------------
 1 file changed, 18 insertions(+), 42 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 97851c5ba3a..0410bf12c52 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -1270,56 +1270,32 @@ static int w83791d_detect(struct i2c_client *client, int kind,
 		return -ENODEV;
 	}
 
-	/* The w83791d may be stuck in some other bank than bank 0. This may
-	   make reading other information impossible. Specify a force=...
-	   parameter, and the Winbond will be reset to the right bank. */
-	if (kind < 0) {
-		if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) {
-			return -ENODEV;
-		}
-		val1 = w83791d_read(client, W83791D_REG_BANK);
-		val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
-		/* Check for Winbond ID if in bank 0 */
-		if (!(val1 & 0x07)) {
-			/* yes it is Bank0 */
-			if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
-			    ((val1 & 0x80) && (val2 != 0x5c))) {
-				return -ENODEV;
-			}
-		}
-		/* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
-		   should match */
-		if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) {
+	if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80)
+		return -ENODEV;
+
+	val1 = w83791d_read(client, W83791D_REG_BANK);
+	val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+	/* Check for Winbond ID if in bank 0 */
+	if (!(val1 & 0x07)) {
+		if ((!(val1 & 0x80) && val2 != 0xa3) ||
+		    ( (val1 & 0x80) && val2 != 0x5c)) {
 			return -ENODEV;
 		}
 	}
+	/* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
+	   should match */
+	if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address)
+		return -ENODEV;
 
-	/* We either have a force parameter or we have reason to
-	   believe it is a Winbond chip. Either way, we want bank 0 and
-	   Vendor ID high byte */
+	/* We want bank 0 and Vendor ID high byte */
 	val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78;
 	w83791d_write(client, W83791D_REG_BANK, val1 | 0x80);
 
 	/* Verify it is a Winbond w83791d */
-	if (kind <= 0) {
-		/* get vendor ID */
-		val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
-		if (val2 != 0x5c) {	/* the vendor is NOT Winbond */
-			return -ENODEV;
-		}
-		val1 = w83791d_read(client, W83791D_REG_WCHIPID);
-		if (val1 == 0x71) {
-			kind = w83791d;
-		} else {
-			if (kind == 0)
-				dev_warn(&adapter->dev,
-					"w83791d: Ignoring 'force' parameter "
-					"for unknown chip at adapter %d, "
-					"address 0x%02x\n",
-					i2c_adapter_id(adapter), address);
-			return -ENODEV;
-		}
-	}
+	val1 = w83791d_read(client, W83791D_REG_WCHIPID);
+	val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+	if (val1 != 0x71 || val2 != 0x5c)
+		return -ENODEV;
 
 	strlcpy(info->type, "w83791d", I2C_NAME_SIZE);
 
-- 
cgit v1.2.3-18-g5258


From 2de1875a5894794b42fce3833cddf4eac55831de Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:56 +0100
Subject: hwmon: (w83792d) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/w83792d.c | 61 +++++++++++++++----------------------------------
 1 file changed, 18 insertions(+), 43 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 2be16194ddf..38978851333 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1273,58 +1273,33 @@ w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info)
 		return -ENODEV;
 	}
 
-	/* The w83792d may be stuck in some other bank than bank 0. This may
-	   make reading other information impossible. Specify a force=... or
-	   force_*=... parameter, and the Winbond will be reset to the right
-	   bank. */
-	if (kind < 0) {
-		if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
-			return -ENODEV;
-		}
-		val1 = w83792d_read_value(client, W83792D_REG_BANK);
-		val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
-		/* Check for Winbond ID if in bank 0 */
-		if (!(val1 & 0x07)) {  /* is Bank0 */
-			if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
-			     ((val1 & 0x80) && (val2 != 0x5c))) {
-				return -ENODEV;
-			}
-		}
-		/* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
-		   should match */
-		if (w83792d_read_value(client,
-					W83792D_REG_I2C_ADDR) != address) {
+	if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80)
+		return -ENODEV;
+
+	val1 = w83792d_read_value(client, W83792D_REG_BANK);
+	val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+	/* Check for Winbond ID if in bank 0 */
+	if (!(val1 & 0x07)) {  /* is Bank0 */
+		if ((!(val1 & 0x80) && val2 != 0xa3) ||
+		    ( (val1 & 0x80) && val2 != 0x5c))
 			return -ENODEV;
-		}
 	}
+	/* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
+	   should match */
+	if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address)
+		return -ENODEV;
 
-	/* We have either had a force parameter, or we have already detected the
-	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
+	/*  Put it now into bank 0 and Vendor ID High Byte */
 	w83792d_write_value(client,
 			    W83792D_REG_BANK,
 			    (w83792d_read_value(client,
 				W83792D_REG_BANK) & 0x78) | 0x80);
 
 	/* Determine the chip type. */
-	if (kind <= 0) {
-		/* get vendor ID */
-		val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
-		if (val2 != 0x5c) {  /* the vendor is NOT Winbond */
-			return -ENODEV;
-		}
-		val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
-		if (val1 == 0x7a) {
-			kind = w83792d;
-		} else {
-			if (kind == 0)
-				dev_warn(&adapter->dev,
-					"w83792d: Ignoring 'force' parameter for"
-					" unknown chip at adapter %d, address"
-					" 0x%02x\n", i2c_adapter_id(adapter),
-					address);
-			return -ENODEV;
-		}
-	}
+	val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
+	val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+	if (val1 != 0x7a || val2 != 0x5c)
+		return -ENODEV;
 
 	strlcpy(info->type, "w83792d", I2C_NAME_SIZE);
 
-- 
cgit v1.2.3-18-g5258


From a1fa4cdcc4abd4c02a81ab7052c16a342d29f060 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:56 +0100
Subject: hwmon: (w83l785ts) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/w83l785ts.c | 70 ++++++++++++++++-------------------------------
 1 file changed, 23 insertions(+), 47 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index ea295b9fc4f..9b6c4c10fba 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -1,7 +1,7 @@
 /*
  * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
  *               monitoring
- * Copyright (C) 2003-2004  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>
  *
  * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
  * by Winbond. It reports a single external temperature with a 1 deg
@@ -146,60 +146,36 @@ static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1);
  */
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
-static int w83l785ts_detect(struct i2c_client *new_client, int kind,
+static int w83l785ts_detect(struct i2c_client *client, int kind,
 			    struct i2c_board_info *info)
 {
-	struct i2c_adapter *adapter = new_client->adapter;
+	struct i2c_adapter *adapter = client->adapter;
+	u16 man_id;
+	u8 chip_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	/*
-	 * Now we do the remaining detection. A negative kind means that
-	 * the driver was loaded with no force parameter (default), so we
-	 * must both detect and identify the chip (actually there is only
-	 * one possible kind of chip for now, W83L785TS-S). A zero kind means
-	 * that the driver was loaded with the force parameter, the detection
-	 * step shall be skipped. A positive kind means that the driver
-	 * was loaded with the force parameter and a given kind of chip is
-	 * requested, so both the detection and the identification steps
-	 * are skipped.
-	 */
-	if (kind < 0) { /* detection */
-		if (((w83l785ts_read_value(new_client,
-		      W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00)
-		 || ((w83l785ts_read_value(new_client,
-		      W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
-			dev_dbg(&adapter->dev,
-				"W83L785TS-S detection failed at 0x%02x.\n",
-				new_client->addr);
-			return -ENODEV;
-		}
+	/* detection */
+	if ((w83l785ts_read_value(client, W83L785TS_REG_CONFIG, 0) & 0x80)
+	 || (w83l785ts_read_value(client, W83L785TS_REG_TYPE, 0) & 0xFC)) {
+		dev_dbg(&adapter->dev,
+			"W83L785TS-S detection failed at 0x%02x\n",
+			client->addr);
+		return -ENODEV;
 	}
 
-	if (kind <= 0) { /* identification */
-		u16 man_id;
-		u8 chip_id;
-
-		man_id = (w83l785ts_read_value(new_client,
-			 W83L785TS_REG_MAN_ID1, 0) << 8) +
-			 w83l785ts_read_value(new_client,
-			 W83L785TS_REG_MAN_ID2, 0);
-		chip_id = w83l785ts_read_value(new_client,
-			  W83L785TS_REG_CHIP_ID, 0);
-
-		if (man_id == 0x5CA3) { /* Winbond */
-			if (chip_id == 0x70) { /* W83L785TS-S */
-				kind = w83l785ts;			
-			}
-		}
-	
-		if (kind <= 0) { /* identification failed */
-			dev_info(&adapter->dev,
-				 "Unsupported chip (man_id=0x%04X, "
-				 "chip_id=0x%02X).\n", man_id, chip_id);
-			return -ENODEV;
-		}
+	/* Identification */
+	man_id = (w83l785ts_read_value(client, W83L785TS_REG_MAN_ID1, 0) << 8)
+	       + w83l785ts_read_value(client, W83L785TS_REG_MAN_ID2, 0);
+	chip_id = w83l785ts_read_value(client, W83L785TS_REG_CHIP_ID, 0);
+
+	if (man_id != 0x5CA3		/* Winbond */
+	 || chip_id != 0x70) {		/* W83L785TS-S */
+		dev_dbg(&adapter->dev,
+			"Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n",
+			man_id, chip_id);
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE);
-- 
cgit v1.2.3-18-g5258


From 52df6440a29123eed912183fe785bbe174ef14b9 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:57 +0100
Subject: hwmon: Clean up detect functions

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Juerg Haefliger <juergh@gmail.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Acked-by: "Hans J. Koch" <hjk@linutronix.de>
Cc: Rudolf Marek <r.marek@assembler.cz>
---
 drivers/hwmon/adm1026.c    | 47 ++++++++++++++--------------------
 drivers/hwmon/adm1029.c    | 55 ++++++++++++---------------------------
 drivers/hwmon/adm1031.c    | 26 +++++--------------
 drivers/hwmon/adm9240.c    | 61 ++++++++++++++++---------------------------
 drivers/hwmon/ads7828.c    | 22 ++++++++--------
 drivers/hwmon/adt7462.c    | 25 ++++++++----------
 drivers/hwmon/adt7470.c    | 25 ++++++++----------
 drivers/hwmon/adt7473.c    | 25 ++++++++----------
 drivers/hwmon/adt7475.c    | 14 +++++-----
 drivers/hwmon/asb100.c     | 55 +++++++++++++--------------------------
 drivers/hwmon/dme1737.c    | 32 ++++++++---------------
 drivers/hwmon/ds1621.c     | 22 +++++++---------
 drivers/hwmon/f75375s.c    | 32 ++++++++---------------
 drivers/hwmon/fschmd.c     | 53 +++++++++++++++++---------------------
 drivers/hwmon/gl518sm.c    | 29 +++++----------------
 drivers/hwmon/gl520sm.c    | 12 ++++-----
 drivers/hwmon/lm63.c       | 54 +++++++++++++++++---------------------
 drivers/hwmon/lm75.c       | 56 +++++++++++++++++++---------------------
 drivers/hwmon/lm78.c       | 58 +++++++++++++++--------------------------
 drivers/hwmon/lm87.c       | 41 +++++++++++++----------------
 drivers/hwmon/lm92.c       | 31 ++++++++--------------
 drivers/hwmon/lm93.c       | 32 ++++++++---------------
 drivers/hwmon/lm95241.c    | 48 ++++++++--------------------------
 drivers/hwmon/max1619.c    | 64 +++++++++++++++-------------------------------
 drivers/hwmon/max6650.c    | 20 ++-------------
 drivers/hwmon/smsc47m192.c | 28 ++++++++++----------
 drivers/hwmon/thmc50.c     | 31 ++++++----------------
 drivers/hwmon/w83793.c     | 53 +++++++++++++-------------------------
 drivers/hwmon/w83l786ng.c  | 56 ++++++++++++----------------------------
 29 files changed, 393 insertions(+), 714 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index ff7de40b6e3..fb5363985e2 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -1672,35 +1672,26 @@ static int adm1026_detect(struct i2c_client *client, int kind,
 		i2c_adapter_id(client->adapter), client->addr,
 		company, verstep);
 
-	/* If auto-detecting, Determine the chip type. */
-	if (kind <= 0) {
-		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x "
-			"...\n", i2c_adapter_id(adapter), address);
-		if (company == ADM1026_COMPANY_ANALOG_DEV
-		    && verstep == ADM1026_VERSTEP_ADM1026) {
-			kind = adm1026;
-		} else if (company == ADM1026_COMPANY_ANALOG_DEV
-			&& (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
-			dev_err(&adapter->dev, "Unrecognized stepping "
-				"0x%02x. Defaulting to ADM1026.\n", verstep);
-			kind = adm1026;
-		} else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
-			dev_err(&adapter->dev, "Found version/stepping "
-				"0x%02x. Assuming generic ADM1026.\n",
-				verstep);
-			kind = any_chip;
-		} else {
-			dev_dbg(&adapter->dev, "Autodetection failed\n");
-			/* Not an ADM1026 ... */
-			if (kind == 0) { /* User used force=x,y */
-				dev_err(&adapter->dev, "Generic ADM1026 not "
-					"found at %d,0x%02x.  Try "
-					"force_adm1026.\n",
-					i2c_adapter_id(adapter), address);
-			}
-			return -ENODEV;
-		}
+	/* Determine the chip type. */
+	dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x...\n",
+		i2c_adapter_id(adapter), address);
+	if (company == ADM1026_COMPANY_ANALOG_DEV
+	    && verstep == ADM1026_VERSTEP_ADM1026) {
+		/* Analog Devices ADM1026 */
+	} else if (company == ADM1026_COMPANY_ANALOG_DEV
+		&& (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+		dev_err(&adapter->dev, "Unrecognized stepping "
+			"0x%02x. Defaulting to ADM1026.\n", verstep);
+	} else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+		dev_err(&adapter->dev, "Found version/stepping "
+			"0x%02x. Assuming generic ADM1026.\n",
+			verstep);
+	} else {
+		dev_dbg(&adapter->dev, "Autodetection failed\n");
+		/* Not an ADM1026... */
+		return -ENODEV;
 	}
+
 	strlcpy(info->type, "adm1026", I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index 36718150b47..4d7d8433c2f 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -301,59 +301,36 @@ static int adm1029_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	/* Now we do the detection and identification. A negative kind
-	 * means that the driver was loaded with no force parameter
-	 * (default), so we must both detect and identify the chip
-	 * (actually there is only one possible kind of chip for now, adm1029).
-	 * A zero kind means that the driver was loaded with the force
-	 * parameter, the detection step shall be skipped. A positive kind
-	 * means that the driver was loaded with the force parameter and a
-	 * given kind of chip is requested, so both the detection and the
-	 * identification steps are skipped. */
-
-	/* Default to an adm1029 if forced */
-	if (kind == 0)
-		kind = adm1029;
-
 	/* ADM1029 doesn't have CHIP ID, check just MAN ID
 	 * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
 	 * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
 	 * documented
 	 */
 
-	if (kind <= 0) {	/* identification */
-		u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
-
-		man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
-		chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
-		temp_devices_installed = i2c_smbus_read_byte_data(client,
+	man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
+	chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
+	temp_devices_installed = i2c_smbus_read_byte_data(client,
 					ADM1029_REG_TEMP_DEVICES_INSTALLED);
-		nb_fan_support = i2c_smbus_read_byte_data(client,
+	nb_fan_support = i2c_smbus_read_byte_data(client,
 						ADM1029_REG_NB_FAN_SUPPORT);
-		/* 0x41 is Analog Devices */
-		if (man_id == 0x41 && (temp_devices_installed & 0xf9) == 0x01
-		    && nb_fan_support == 0x03) {
-			if ((chip_id & 0xF0) == 0x00) {
-				kind = adm1029;
-			} else {
-				/* There are no "official" CHIP ID, so actually
-				 * we use Major/Minor revision for that */
-				printk(KERN_INFO
-				       "adm1029: Unknown major revision %x, "
-				       "please let us know\n", chip_id);
-			}
-		}
+	/* 0x41 is Analog Devices */
+	if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01
+	    || nb_fan_support != 0x03)
+		return -ENODEV;
 
-		if (kind <= 0) {	/* identification failed */
-			pr_debug("adm1029: Unsupported chip (man_id=0x%02X, "
-				 "chip_id=0x%02X)\n", man_id, chip_id);
-			return -ENODEV;
-		}
+	if ((chip_id & 0xF0) != 0x00) {
+		/* There are no "official" CHIP ID, so actually
+		 * we use Major/Minor revision for that */
+		pr_info("adm1029: Unknown major revision %x, "
+			"please let us know\n", chip_id);
+		return -ENODEV;
 	}
+
 	strlcpy(info->type, "adm1029", I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 56905955352..0e722175aae 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -817,31 +817,19 @@ static int adm1031_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	const char *name = "";
+	const char *name;
+	int id, co;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind < 0) {
-		int id, co;
-		id = i2c_smbus_read_byte_data(client, 0x3d);
-		co = i2c_smbus_read_byte_data(client, 0x3e);
+	id = i2c_smbus_read_byte_data(client, 0x3d);
+	co = i2c_smbus_read_byte_data(client, 0x3e);
 
-		if (!((id == 0x31 || id == 0x30) && co == 0x41))
-			return -ENODEV;
-		kind = (id == 0x30) ? adm1030 : adm1031;
-	}
-
-	if (kind <= 0)
-		kind = adm1031;
+	if (!((id == 0x31 || id == 0x30) && co == 0x41))
+		return -ENODEV;
+	name = (id == 0x30) ? "adm1030" : "adm1031";
 
-	/* Given the detected chip type, set the chip name and the
-	 * auto fan control helper table. */
-	if (kind == adm1030) {
-		name = "adm1030";
-	} else if (kind == adm1031) {
-		name = "adm1031";
-	}
 	strlcpy(info->type, name, I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 2444b15f2e9..20e0481cc20 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -556,51 +556,34 @@ static int adm9240_detect(struct i2c_client *new_client, int kind,
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind == 0) {
-		kind = adm9240;
-	}
-
-	if (kind < 0) {
-
-		/* verify chip: reg address should match i2c address */
-		if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
-				!= address) {
-			dev_err(&adapter->dev, "detect fail: address match, "
-					"0x%02x\n", address);
-			return -ENODEV;
-		}
-
-		/* check known chip manufacturer */
-		man_id = i2c_smbus_read_byte_data(new_client,
-				ADM9240_REG_MAN_ID);
-		if (man_id == 0x23) {
-			kind = adm9240;
-		} else if (man_id == 0xda) {
-			kind = ds1780;
-		} else if (man_id == 0x01) {
-			kind = lm81;
-		} else {
-			dev_err(&adapter->dev, "detect fail: unknown manuf, "
-					"0x%02x\n", man_id);
-			return -ENODEV;
-		}
-
-		/* successful detect, print chip info */
-		die_rev = i2c_smbus_read_byte_data(new_client,
-				ADM9240_REG_DIE_REV);
-		dev_info(&adapter->dev, "found %s revision %u\n",
-				man_id == 0x23 ? "ADM9240" :
-				man_id == 0xda ? "DS1780" : "LM81", die_rev);
+	/* verify chip: reg address should match i2c address */
+	if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
+			!= address) {
+		dev_err(&adapter->dev, "detect fail: address match, 0x%02x\n",
+			address);
+		return -ENODEV;
 	}
 
-	/* either forced or detected chip kind */
-	if (kind == adm9240) {
+	/* check known chip manufacturer */
+	man_id = i2c_smbus_read_byte_data(new_client, ADM9240_REG_MAN_ID);
+	if (man_id == 0x23) {
 		name = "adm9240";
-	} else if (kind == ds1780) {
+	} else if (man_id == 0xda) {
 		name = "ds1780";
-	} else if (kind == lm81) {
+	} else if (man_id == 0x01) {
 		name = "lm81";
+	} else {
+		dev_err(&adapter->dev, "detect fail: unknown manuf, 0x%02x\n",
+			man_id);
+		return -ENODEV;
 	}
+
+	/* successful detect, print chip info */
+	die_rev = i2c_smbus_read_byte_data(new_client, ADM9240_REG_DIE_REV);
+	dev_info(&adapter->dev, "found %s revision %u\n",
+		 man_id == 0x23 ? "ADM9240" :
+		 man_id == 0xda ? "DS1780" : "LM81", die_rev);
+
 	strlcpy(info->type, name, I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 5c39b4af1b2..451977bca7d 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -191,6 +191,7 @@ static int ads7828_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	int ch;
 
 	/* Check we have a valid client */
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA))
@@ -202,20 +203,17 @@ static int ads7828_detect(struct i2c_client *client, int kind,
 	- Read from the 8 channel addresses
 	- Check the top 4 bits of each result are not set (12 data bits)
 	*/
-	if (kind < 0) {
-		int ch;
-		for (ch = 0; ch < ADS7828_NCH; ch++) {
-			u16 in_data;
-			u8 cmd = channel_cmd_byte(ch);
-			in_data = ads7828_read_value(client, cmd);
-			if (in_data & 0xF000) {
-				printk(KERN_DEBUG
-				"%s : Doesn't look like an ads7828 device\n",
-				__func__);
-				return -ENODEV;
-			}
+	for (ch = 0; ch < ADS7828_NCH; ch++) {
+		u16 in_data;
+		u8 cmd = channel_cmd_byte(ch);
+		in_data = ads7828_read_value(client, cmd);
+		if (in_data & 0xF000) {
+			pr_debug("%s : Doesn't look like an ads7828 device\n",
+				 __func__);
+			return -ENODEV;
 		}
 	}
+
 	strlcpy(info->type, "ads7828", I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
index 1852f27bac5..f9c9562b6a9 100644
--- a/drivers/hwmon/adt7462.c
+++ b/drivers/hwmon/adt7462.c
@@ -1906,27 +1906,22 @@ static int adt7462_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	int vendor, device, revision;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind <= 0) {
-		int vendor, device, revision;
-
-		vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
-		if (vendor != ADT7462_VENDOR)
-			return -ENODEV;
+	vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
+	if (vendor != ADT7462_VENDOR)
+		return -ENODEV;
 
-		device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
-		if (device != ADT7462_DEVICE)
-			return -ENODEV;
+	device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
+	if (device != ADT7462_DEVICE)
+		return -ENODEV;
 
-		revision = i2c_smbus_read_byte_data(client,
-						    ADT7462_REG_REVISION);
-		if (revision != ADT7462_REVISION)
-			return -ENODEV;
-	} else
-		dev_dbg(&adapter->dev, "detection forced\n");
+	revision = i2c_smbus_read_byte_data(client, ADT7462_REG_REVISION);
+	if (revision != ADT7462_REVISION)
+		return -ENODEV;
 
 	strlcpy(info->type, "adt7462", I2C_NAME_SIZE);
 
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 633e1a1e9d7..32b1750a689 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -1229,27 +1229,22 @@ static int adt7470_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	int vendor, device, revision;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind <= 0) {
-		int vendor, device, revision;
-
-		vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
-		if (vendor != ADT7470_VENDOR)
-			return -ENODEV;
+	vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
+	if (vendor != ADT7470_VENDOR)
+		return -ENODEV;
 
-		device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
-		if (device != ADT7470_DEVICE)
-			return -ENODEV;
+	device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
+	if (device != ADT7470_DEVICE)
+		return -ENODEV;
 
-		revision = i2c_smbus_read_byte_data(client,
-						    ADT7470_REG_REVISION);
-		if (revision != ADT7470_REVISION)
-			return -ENODEV;
-	} else
-		dev_dbg(&adapter->dev, "detection forced\n");
+	revision = i2c_smbus_read_byte_data(client, ADT7470_REG_REVISION);
+	if (revision != ADT7470_REVISION)
+		return -ENODEV;
 
 	strlcpy(info->type, "adt7470", I2C_NAME_SIZE);
 
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 0a6ce2367b4..97ef50833f6 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -1090,27 +1090,22 @@ static int adt7473_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	int vendor, device, revision;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind <= 0) {
-		int vendor, device, revision;
-
-		vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
-		if (vendor != ADT7473_VENDOR)
-			return -ENODEV;
+	vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
+	if (vendor != ADT7473_VENDOR)
+		return -ENODEV;
 
-		device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
-		if (device != ADT7473_DEVICE)
-			return -ENODEV;
+	device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
+	if (device != ADT7473_DEVICE)
+		return -ENODEV;
 
-		revision = i2c_smbus_read_byte_data(client,
-						    ADT7473_REG_REVISION);
-		if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
-			return -ENODEV;
-	} else
-		dev_dbg(&adapter->dev, "detection forced\n");
+	revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION);
+	if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
+		return -ENODEV;
 
 	strlcpy(info->type, "adt7473", I2C_NAME_SIZE);
 
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index b5a95193c69..41d3e38f9ce 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -974,14 +974,12 @@ static int adt7475_detect(struct i2c_client *client, int kind,
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind <= 0) {
-		if (adt7475_read(REG_VENDID) != 0x41 ||
-		    adt7475_read(REG_DEVID) != 0x75) {
-			dev_err(&adapter->dev,
-				"Couldn't detect a adt7475 part at 0x%02x\n",
-				(unsigned int)client->addr);
-			return -ENODEV;
-		}
+	if (adt7475_read(REG_VENDID) != 0x41 ||
+	    adt7475_read(REG_DEVID) != 0x75) {
+		dev_err(&adapter->dev,
+			"Couldn't detect a adt7475 part at 0x%02x\n",
+			(unsigned int)client->addr);
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 8acf82977e7..480f80ea1fa 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -701,6 +701,7 @@ static int asb100_detect(struct i2c_client *client, int kind,
 			 struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	int val1, val2;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		pr_debug("asb100.o: detect failed, "
@@ -708,50 +709,30 @@ static int asb100_detect(struct i2c_client *client, int kind,
 		return -ENODEV;
 	}
 
-	/* The chip may be stuck in some other bank than bank 0. This may
-	   make reading other information impossible. Specify a force=... or
-	   force_*=... parameter, and the chip will be reset to the right
-	   bank. */
-	if (kind < 0) {
-
-		int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
-		int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
-
-		/* If we're in bank 0 */
-		if ((!(val1 & 0x07)) &&
-				/* Check for ASB100 ID (low byte) */
-				(((!(val1 & 0x80)) && (val2 != 0x94)) ||
-				/* Check for ASB100 ID (high byte ) */
-				((val1 & 0x80) && (val2 != 0x06)))) {
-			pr_debug("asb100.o: detect failed, "
-					"bad chip id 0x%02x!\n", val2);
-			return -ENODEV;
-		}
+	val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
+	val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
 
-	} /* kind < 0 */
+	/* If we're in bank 0 */
+	if ((!(val1 & 0x07)) &&
+			/* Check for ASB100 ID (low byte) */
+			(((!(val1 & 0x80)) && (val2 != 0x94)) ||
+			/* Check for ASB100 ID (high byte ) */
+			((val1 & 0x80) && (val2 != 0x06)))) {
+		pr_debug("asb100: detect failed, bad chip id 0x%02x!\n", val2);
+		return -ENODEV;
+	}
 
-	/* We have either had a force parameter, or we have already detected
-	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
+	/* Put it now into bank 0 and Vendor ID High Byte */
 	i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
 		(i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
 		| 0x80);
 
 	/* Determine the chip type. */
-	if (kind <= 0) {
-		int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
-		int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
-
-		if ((val1 == 0x31) && (val2 == 0x06))
-			kind = asb100;
-		else {
-			if (kind == 0)
-				dev_warn(&adapter->dev, "ignoring "
-					"'force' parameter for unknown chip "
-					"at adapter %d, address 0x%02x.\n",
-					i2c_adapter_id(adapter), client->addr);
-			return -ENODEV;
-		}
-	}
+	val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
+	val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
+
+	if (val1 != 0x31 || val2 != 0x06)
+		return -ENODEV;
 
 	strlcpy(info->type, "asb100", I2C_NAME_SIZE);
 
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 27d62574284..4377bb0cc52 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -2220,33 +2220,23 @@ static int dme1737_i2c_detect(struct i2c_client *client, int kind,
 		return -ENODEV;
 	}
 
-	/* A negative kind means that the driver was loaded with no force
-	 * parameter (default), so we must identify the chip. */
-	if (kind < 0) {
-		company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
-		verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
-
-		if (company == DME1737_COMPANY_SMSC &&
-		    (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
-			kind = dme1737;
-		} else if (company == DME1737_COMPANY_SMSC &&
-			   verstep == SCH5027_VERSTEP) {
-			kind = sch5027;
-		} else {
-			return -ENODEV;
-		}
-	}
+	company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
+	verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
 
-	if (kind == sch5027) {
+	if (company == DME1737_COMPANY_SMSC &&
+	    verstep == SCH5027_VERSTEP) {
 		name = "sch5027";
-	} else {
-		kind = dme1737;
+
+	} else if (company == DME1737_COMPANY_SMSC &&
+		   (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
 		name = "dme1737";
+	} else {
+		return -ENODEV;
 	}
 
 	dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n",
-		 kind == sch5027 ? "SCH5027" : "DME1737", client->addr,
-		 verstep);
+		 verstep == SCH5027_VERSTEP ? "SCH5027" : "DME1737",
+		 client->addr, verstep);
 	strlcpy(info->type, name, I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 53f88f51181..2a4c6a05b14 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -237,20 +237,16 @@ static int ds1621_detect(struct i2c_client *client, int kind,
 		return -ENODEV;
 
 	/* Now, we do the remaining detection. It is lousy. */
-	if (kind < 0) {
-		/* The NVB bit should be low if no EEPROM write has been 
-		   requested during the latest 10ms, which is highly 
-		   improbable in our case. */
-		conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
-		if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
+	/* The NVB bit should be low if no EEPROM write has been  requested
+	   during the latest 10ms, which is highly improbable in our case. */
+	conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
+	if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
+		return -ENODEV;
+	/* The 7 lowest bits of a temperature should always be 0. */
+	for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
+		temp = i2c_smbus_read_word_data(client, DS1621_REG_TEMP[i]);
+		if (temp < 0 || (temp & 0x7f00))
 			return -ENODEV;
-		/* The 7 lowest bits of a temperature should always be 0. */
-		for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
-			temp = i2c_smbus_read_word_data(client,
-							DS1621_REG_TEMP[i]);
-			if (temp < 0 || (temp & 0x7f00))
-				return -ENODEV;
-		}
 	}
 
 	strlcpy(info->type, "ds1621", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index e2107e533ed..40dfbcd3f3f 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -681,30 +681,20 @@ static int f75375_detect(struct i2c_client *client, int kind,
 			 struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	u8 version = 0;
-	const char *name = "";
-
-	if (kind < 0) {
-		u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
-		u16 chipid = f75375_read16(client, F75375_CHIP_ID);
-		version = f75375_read8(client, F75375_REG_VERSION);
-		if (chipid == 0x0306 && vendid == 0x1934) {
-			kind = f75375;
-		} else if (chipid == 0x0204 && vendid == 0x1934) {
-			kind = f75373;
-		} else {
-			dev_err(&adapter->dev,
-				"failed,%02X,%02X,%02X\n",
-				chipid, version, vendid);
-			return -ENODEV;
-		}
-	}
+	u16 vendid, chipid;
+	u8 version;
+	const char *name;
 
-	if (kind == f75375) {
+	vendid = f75375_read16(client, F75375_REG_VENDOR);
+	chipid = f75375_read16(client, F75375_CHIP_ID);
+	if (chipid == 0x0306 && vendid == 0x1934)
 		name = "f75375";
-	} else if (kind == f75373) {
+	else if (chipid == 0x0204 && vendid == 0x1934)
 		name = "f75373";
-	}
+	else
+		return -ENODEV;
+
+	version = f75375_read8(client, F75375_REG_VERSION);
 	dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
 	strlcpy(info->type, name, I2C_NAME_SIZE);
 
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index da1b1f9488a..281829cd153 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -1000,43 +1000,38 @@ static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
 	}
 }
 
-static int fschmd_detect(struct i2c_client *client, int kind,
+static int fschmd_detect(struct i2c_client *client, int _kind,
 			 struct i2c_board_info *info)
 {
+	enum chips kind;
 	struct i2c_adapter *adapter = client->adapter;
+	char id[4];
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
 	/* Detect & Identify the chip */
-	if (kind <= 0) {
-		char id[4];
-
-		id[0] = i2c_smbus_read_byte_data(client,
-				FSCHMD_REG_IDENT_0);
-		id[1] = i2c_smbus_read_byte_data(client,
-				FSCHMD_REG_IDENT_1);
-		id[2] = i2c_smbus_read_byte_data(client,
-				FSCHMD_REG_IDENT_2);
-		id[3] = '\0';
-
-		if (!strcmp(id, "PEG"))
-			kind = fscpos;
-		else if (!strcmp(id, "HER"))
-			kind = fscher;
-		else if (!strcmp(id, "SCY"))
-			kind = fscscy;
-		else if (!strcmp(id, "HRC"))
-			kind = fschrc;
-		else if (!strcmp(id, "HMD"))
-			kind = fschmd;
-		else if (!strcmp(id, "HDS"))
-			kind = fschds;
-		else if (!strcmp(id, "SYL"))
-			kind = fscsyl;
-		else
-			return -ENODEV;
-	}
+	id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0);
+	id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1);
+	id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2);
+	id[3] = '\0';
+
+	if (!strcmp(id, "PEG"))
+		kind = fscpos;
+	else if (!strcmp(id, "HER"))
+		kind = fscher;
+	else if (!strcmp(id, "SCY"))
+		kind = fscscy;
+	else if (!strcmp(id, "HRC"))
+		kind = fschrc;
+	else if (!strcmp(id, "HMD"))
+		kind = fschmd;
+	else if (!strcmp(id, "HDS"))
+		kind = fschds;
+	else if (!strcmp(id, "SYL"))
+		kind = fscsyl;
+	else
+		return -ENODEV;
 
 	strlcpy(info->type, fschmd_id[kind - 1].name, I2C_NAME_SIZE);
 
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 7820df45d77..1d69458aa0b 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -488,36 +488,21 @@ static int gl518_detect(struct i2c_client *client, int kind,
 			struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	int i;
+	int rev;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
 		return -ENODEV;
 
 	/* Now, we do the remaining detection. */
-
-	if (kind < 0) {
-		if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
-		 || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
-			return -ENODEV;
-	}
+	if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
+	 || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
+		return -ENODEV;
 
 	/* Determine the chip type. */
-	if (kind <= 0) {
-		i = gl518_read_value(client, GL518_REG_REVISION);
-		if (i == 0x00) {
-			kind = gl518sm_r00;
-		} else if (i == 0x80) {
-			kind = gl518sm_r80;
-		} else {
-			if (kind <= 0)
-				dev_info(&adapter->dev,
-				    "Ignoring 'force' parameter for unknown "
-				    "chip at adapter %d, address 0x%02x\n",
-				    i2c_adapter_id(adapter), client->addr);
-			return -ENODEV;
-		}
-	}
+	rev = gl518_read_value(client, GL518_REG_REVISION);
+	if (rev != 0x00 && rev != 0x80)
+		return -ENODEV;
 
 	strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
 
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 19616f2242b..92b5720ceaf 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -691,13 +691,11 @@ static int gl520_detect(struct i2c_client *client, int kind,
 		return -ENODEV;
 
 	/* Determine the chip type. */
-	if (kind < 0) {
-		if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
-		    ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
-		    ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
-			dev_dbg(&client->dev, "Unknown chip type, skipping\n");
-			return -ENODEV;
-		}
+	if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
+	    ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
+	    ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
+		dev_dbg(&client->dev, "Unknown chip type, skipping\n");
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, "gl520sm", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 3195a265f0e..5da66ab04f7 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -427,40 +427,34 @@ static int lm63_detect(struct i2c_client *new_client, int kind,
 		       struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
+	u8 man_id, chip_id, reg_config1, reg_config2;
+	u8 reg_alert_status, reg_alert_mask;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind < 0) { /* must identify */
-		u8 man_id, chip_id, reg_config1, reg_config2;
-		u8 reg_alert_status, reg_alert_mask;
-
-		man_id = i2c_smbus_read_byte_data(new_client,
-			 LM63_REG_MAN_ID);
-		chip_id = i2c_smbus_read_byte_data(new_client,
-			  LM63_REG_CHIP_ID);
-		reg_config1 = i2c_smbus_read_byte_data(new_client,
-			      LM63_REG_CONFIG1);
-		reg_config2 = i2c_smbus_read_byte_data(new_client,
-			      LM63_REG_CONFIG2);
-		reg_alert_status = i2c_smbus_read_byte_data(new_client,
-				   LM63_REG_ALERT_STATUS);
-		reg_alert_mask = i2c_smbus_read_byte_data(new_client,
-				 LM63_REG_ALERT_MASK);
-
-		if (man_id == 0x01 /* National Semiconductor */
-		 && chip_id == 0x41 /* LM63 */
-		 && (reg_config1 & 0x18) == 0x00
-		 && (reg_config2 & 0xF8) == 0x00
-		 && (reg_alert_status & 0x20) == 0x00
-		 && (reg_alert_mask & 0xA4) == 0xA4) {
-			kind = lm63;
-		} else { /* failed */
-			dev_dbg(&adapter->dev, "Unsupported chip "
-				"(man_id=0x%02X, chip_id=0x%02X).\n",
-				man_id, chip_id);
-			return -ENODEV;
-		}
+	man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID);
+	chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID);
+
+	reg_config1 = i2c_smbus_read_byte_data(new_client,
+		      LM63_REG_CONFIG1);
+	reg_config2 = i2c_smbus_read_byte_data(new_client,
+		      LM63_REG_CONFIG2);
+	reg_alert_status = i2c_smbus_read_byte_data(new_client,
+			   LM63_REG_ALERT_STATUS);
+	reg_alert_mask = i2c_smbus_read_byte_data(new_client,
+			 LM63_REG_ALERT_MASK);
+
+	if (man_id != 0x01 /* National Semiconductor */
+	 || chip_id != 0x41 /* LM63 */
+	 || (reg_config1 & 0x18) != 0x00
+	 || (reg_config2 & 0xF8) != 0x00
+	 || (reg_alert_status & 0x20) != 0x00
+	 || (reg_alert_mask & 0xA4) != 0xA4) {
+		dev_dbg(&adapter->dev,
+			"Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+			man_id, chip_id);
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, "lm63", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 55bd87c15c9..e392548cccb 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -239,6 +239,7 @@ static int lm75_detect(struct i2c_client *new_client, int kind,
 {
 	struct i2c_adapter *adapter = new_client->adapter;
 	int i;
+	int cur, conf, hyst, os;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
@@ -251,40 +252,35 @@ static int lm75_detect(struct i2c_client *new_client, int kind,
 	   The cycling+unused addresses combination is not tested,
 	   since it would significantly slow the detection down and would
 	   hardly add any value. */
-	if (kind < 0) {
-		int cur, conf, hyst, os;
-
-		/* Unused addresses */
-		cur = i2c_smbus_read_word_data(new_client, 0);
-		conf = i2c_smbus_read_byte_data(new_client, 1);
-		hyst = i2c_smbus_read_word_data(new_client, 2);
-		if (i2c_smbus_read_word_data(new_client, 4) != hyst
-		 || i2c_smbus_read_word_data(new_client, 5) != hyst
-		 || i2c_smbus_read_word_data(new_client, 6) != hyst
-		 || i2c_smbus_read_word_data(new_client, 7) != hyst)
-			return -ENODEV;
-		os = i2c_smbus_read_word_data(new_client, 3);
-		if (i2c_smbus_read_word_data(new_client, 4) != os
-		 || i2c_smbus_read_word_data(new_client, 5) != os
-		 || i2c_smbus_read_word_data(new_client, 6) != os
-		 || i2c_smbus_read_word_data(new_client, 7) != os)
-			return -ENODEV;
 
-		/* Unused bits */
-		if (conf & 0xe0)
-			return -ENODEV;
+	/* Unused addresses */
+	cur = i2c_smbus_read_word_data(new_client, 0);
+	conf = i2c_smbus_read_byte_data(new_client, 1);
+	hyst = i2c_smbus_read_word_data(new_client, 2);
+	if (i2c_smbus_read_word_data(new_client, 4) != hyst
+	 || i2c_smbus_read_word_data(new_client, 5) != hyst
+	 || i2c_smbus_read_word_data(new_client, 6) != hyst
+	 || i2c_smbus_read_word_data(new_client, 7) != hyst)
+		return -ENODEV;
+	os = i2c_smbus_read_word_data(new_client, 3);
+	if (i2c_smbus_read_word_data(new_client, 4) != os
+	 || i2c_smbus_read_word_data(new_client, 5) != os
+	 || i2c_smbus_read_word_data(new_client, 6) != os
+	 || i2c_smbus_read_word_data(new_client, 7) != os)
+		return -ENODEV;
 
-		/* Addresses cycling */
-		for (i = 8; i < 0xff; i += 8)
-			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
-			 || i2c_smbus_read_word_data(new_client, i + 2) != hyst
-			 || i2c_smbus_read_word_data(new_client, i + 3) != os)
-				return -ENODEV;
+	/* Unused bits */
+	if (conf & 0xe0)
+		return -ENODEV;
+
+	/* Addresses cycling */
+	for (i = 8; i < 0xff; i += 8) {
+		if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+		 || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+		 || i2c_smbus_read_word_data(new_client, i + 3) != os)
+			return -ENODEV;
 	}
 
-	/* NOTE: we treat "force=..." and "force_lm75=..." the same.
-	 * Only new-style driver binding distinguishes chip types.
-	 */
 	strlcpy(info->type, "lm75", I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index f7e70163e01..5978291cebb 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -576,52 +576,34 @@ static int lm78_i2c_detect(struct i2c_client *client, int kind,
 	if (isa)
 		mutex_lock(&isa->update_lock);
 
-	if (kind < 0) {
-		if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80)
-		 || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR)
-		    != address)
-			goto err_nodev;
-
-		/* Explicitly prevent the misdetection of Winbond chips */
-		i = i2c_smbus_read_byte_data(client, 0x4f);
-		if (i == 0xa3 || i == 0x5c)
-			goto err_nodev;
-	}
+	if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80)
+	 || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR) != address)
+		goto err_nodev;
+
+	/* Explicitly prevent the misdetection of Winbond chips */
+	i = i2c_smbus_read_byte_data(client, 0x4f);
+	if (i == 0xa3 || i == 0x5c)
+		goto err_nodev;
 
 	/* Determine the chip type. */
-	if (kind <= 0) {
-		i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID);
-		if (i == 0x00 || i == 0x20	/* LM78 */
-		 || i == 0x40)			/* LM78-J */
-			kind = lm78;
-		else if ((i & 0xfe) == 0xc0)
-			kind = lm79;
-		else {
-			if (kind == 0)
-				dev_warn(&adapter->dev, "Ignoring 'force' "
-					"parameter for unknown chip at "
-					"adapter %d, address 0x%02x\n",
-					i2c_adapter_id(adapter), address);
-			goto err_nodev;
-		}
+	i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID);
+	if (i == 0x00 || i == 0x20	/* LM78 */
+	 || i == 0x40)			/* LM78-J */
+		client_name = "lm78";
+	else if ((i & 0xfe) == 0xc0)
+		client_name = "lm79";
+	else
+		goto err_nodev;
 
-		if (lm78_alias_detect(client, i)) {
-			dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
-				"be the same as ISA device\n", address);
-			goto err_nodev;
-		}
+	if (lm78_alias_detect(client, i)) {
+		dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+			"be the same as ISA device\n", address);
+		goto err_nodev;
 	}
 
 	if (isa)
 		mutex_unlock(&isa->update_lock);
 
-	switch (kind) {
-	case lm79:
-		client_name = "lm79";
-		break;
-	default:
-		client_name = "lm78";
-	}
 	strlcpy(info->type, client_name, I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 2e4a3cea95f..4929b1815ee 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -666,37 +666,32 @@ static int lm87_detect(struct i2c_client *new_client, int kind,
 		       struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
-	static const char *names[] = { "lm87", "adm1024" };
+	const char *name;
+	u8 cid, rev;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	/* Default to an LM87 if forced */
-	if (kind == 0)
-		kind = lm87;
+	if (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
+		return -ENODEV;
 
 	/* Now, we do the remaining detection. */
-	if (kind < 0) {
-		u8 cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
-		u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
-
-		if (cid == 0x02			/* National Semiconductor */
-		 && (rev >= 0x01 && rev <= 0x08))
-			kind = lm87;
-		else if (cid == 0x41		/* Analog Devices */
-		      && (rev & 0xf0) == 0x10)
-			kind = adm1024;
-
-		if (kind < 0
-		 || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
-			dev_dbg(&adapter->dev,
-				"LM87 detection failed at 0x%02x.\n",
-				new_client->addr);
-			return -ENODEV;
-		}
+	cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
+	rev = lm87_read_value(new_client, LM87_REG_REVISION);
+
+	if (cid == 0x02			/* National Semiconductor */
+	 && (rev >= 0x01 && rev <= 0x08))
+		name = "lm87";
+	else if (cid == 0x41		/* Analog Devices */
+	      && (rev & 0xf0) == 0x10)
+		name = "adm1024";
+	else {
+		dev_dbg(&adapter->dev, "LM87 detection failed at 0x%02x\n",
+			new_client->addr);
+		return -ENODEV;
 	}
 
-	strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE);
+	strlcpy(info->type, name, I2C_NAME_SIZE);
 
 	return 0;
 }
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index b2e00c5a7ee..47ac698709d 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -323,31 +323,22 @@ static int lm92_detect(struct i2c_client *new_client, int kind,
 		       struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
+	u8 config;
+	u16 man_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
 					    | I2C_FUNC_SMBUS_WORD_DATA))
 		return -ENODEV;
 
-	/* A negative kind means that the driver was loaded with no force
-	   parameter (default), so we must identify the chip. */
-	if (kind < 0) {
-		u8 config = i2c_smbus_read_byte_data(new_client,
-			     LM92_REG_CONFIG);
-		u16 man_id = i2c_smbus_read_word_data(new_client,
-			     LM92_REG_MAN_ID);
-
-		if ((config & 0xe0) == 0x00
-		 && man_id == 0x0180) {
-			pr_info("lm92: Found National Semiconductor LM92 chip\n");
-	 		kind = lm92;
-		} else
-		if (max6635_check(new_client)) {
-			pr_info("lm92: Found Maxim MAX6635 chip\n");
-			kind = lm92; /* No separate prefix */
-		}
-		else
-			return -ENODEV;
-	}
+	config = i2c_smbus_read_byte_data(new_client, LM92_REG_CONFIG);
+	man_id = i2c_smbus_read_word_data(new_client, LM92_REG_MAN_ID);
+
+	if ((config & 0xe0) == 0x00 && man_id == 0x0180)
+		pr_info("lm92: Found National Semiconductor LM92 chip\n");
+	else if (max6635_check(new_client))
+		pr_info("lm92: Found Maxim MAX6635 chip\n");
+	else
+		return -ENODEV;
 
 	strlcpy(info->type, "lm92", I2C_NAME_SIZE);
 
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index fc36cadf36f..495e7ce6f8a 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -2505,34 +2505,24 @@ static int lm93_detect(struct i2c_client *client, int kind,
 		       struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	int mfr, ver;
 
 	if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
 		return -ENODEV;
 
 	/* detection */
-	if (kind < 0) {
-		int mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
-
-		if (mfr != 0x01) {
-			dev_dbg(&adapter->dev,"detect failed, "
-				"bad manufacturer id 0x%02x!\n", mfr);
-			return -ENODEV;
-		}
+	mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
+	if (mfr != 0x01) {
+		dev_dbg(&adapter->dev,
+			"detect failed, bad manufacturer id 0x%02x!\n", mfr);
+		return -ENODEV;
 	}
 
-	if (kind <= 0) {
-		int ver = lm93_read_byte(client, LM93_REG_VER);
-
-		if ((ver == LM93_MFR_ID) || (ver == LM93_MFR_ID_PROTOTYPE)) {
-			kind = lm93;
-		} else {
-			dev_dbg(&adapter->dev,"detect failed, "
-				"bad version id 0x%02x!\n", ver);
-			if (kind == 0)
-				dev_dbg(&adapter->dev,
-					"(ignored 'force' parameter)\n");
-			return -ENODEV;
-		}
+	ver = lm93_read_byte(client, LM93_REG_VER);
+	if (ver != LM93_MFR_ID && ver != LM93_MFR_ID_PROTOTYPE) {
+		dev_dbg(&adapter->dev,
+			"detect failed, bad version id 0x%02x!\n", ver);
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, "lm93", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index e34f9e402a2..906b896cf1d 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -315,51 +315,23 @@ static int lm95241_detect(struct i2c_client *new_client, int kind,
 {
 	struct i2c_adapter *adapter = new_client->adapter;
 	int address = new_client->addr;
-	const char *name = "";
+	const char *name;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	/*
-	 * Now we do the remaining detection. A negative kind means that
-	 * the driver was loaded with no force parameter (default), so we
-	 * must both detect and identify the chip. A zero kind means that
-	 * the driver was loaded with the force parameter, the detection
-	 * step shall be skipped. A positive kind means that the driver
-	 * was loaded with the force parameter and a given kind of chip is
-	 * requested, so both the detection and the identification steps
-	 * are skipped.
-	 */
-	if (kind < 0) {	/* detection */
-		if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
-		     != MANUFACTURER_ID)
-		|| (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
-		    < DEFAULT_REVISION)) {
-			dev_dbg(&adapter->dev,
-				"LM95241 detection failed at 0x%02x.\n",
-				address);
-			return -ENODEV;
-		}
-	}
-
-	if (kind <= 0) { /* identification */
-		if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
-		     == MANUFACTURER_ID)
-		&& (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
-		    >= DEFAULT_REVISION)) {
-
-			kind = lm95241;
-
-			if (kind <= 0) { /* identification failed */
-				dev_info(&adapter->dev, "Unsupported chip\n");
-				return -ENODEV;
-			}
-		}
+	if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
+	     == MANUFACTURER_ID)
+	 && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
+	     >= DEFAULT_REVISION)) {
+		name = "lm95241";
+	} else {
+		dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
+			address);
+		return -ENODEV;
 	}
 
 	/* Fill the i2c board info */
-	if (kind == lm95241)
-		name = "lm95241";
 	strlcpy(info->type, name, I2C_NAME_SIZE);
 	return 0;
 }
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 7897754f3a5..7fcf5ff89e7 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -226,58 +226,34 @@ static const struct attribute_group max1619_group = {
  */
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
-static int max1619_detect(struct i2c_client *new_client, int kind,
+static int max1619_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
-	struct i2c_adapter *adapter = new_client->adapter;
-	u8 reg_config=0, reg_convrate=0, reg_status=0;
+	struct i2c_adapter *adapter = client->adapter;
+	u8 reg_config, reg_convrate, reg_status, man_id, chip_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	/*
-	 * Now we do the remaining detection. A negative kind means that
-	 * the driver was loaded with no force parameter (default), so we
-	 * must both detect and identify the chip. A zero kind means that
-	 * the driver was loaded with the force parameter, the detection
-	 * step shall be skipped. A positive kind means that the driver
-	 * was loaded with the force parameter and a given kind of chip is
-	 * requested, so both the detection and the identification steps
-	 * are skipped.
-	 */
-	if (kind < 0) { /* detection */
-		reg_config = i2c_smbus_read_byte_data(new_client,
-			      MAX1619_REG_R_CONFIG);
-		reg_convrate = i2c_smbus_read_byte_data(new_client,
-			       MAX1619_REG_R_CONVRATE);
-		reg_status = i2c_smbus_read_byte_data(new_client,
-				MAX1619_REG_R_STATUS);
-		if ((reg_config & 0x03) != 0x00
-		 || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) {
-			dev_dbg(&adapter->dev,
-				"MAX1619 detection failed at 0x%02x.\n",
-				new_client->addr);
-			return -ENODEV;
-		}
+	/* detection */
+	reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
+	reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE);
+	reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS);
+	if ((reg_config & 0x03) != 0x00
+	 || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) {
+		dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n",
+			client->addr);
+		return -ENODEV;
 	}
 
-	if (kind <= 0) { /* identification */
-		u8 man_id, chip_id;
-	
-		man_id = i2c_smbus_read_byte_data(new_client,
-			 MAX1619_REG_R_MAN_ID);
-		chip_id = i2c_smbus_read_byte_data(new_client,
-			  MAX1619_REG_R_CHIP_ID);
-		
-		if ((man_id == 0x4D) && (chip_id == 0x04))
-			kind = max1619;
-
-		if (kind <= 0) { /* identification failed */
-			dev_info(&adapter->dev,
-			    "Unsupported chip (man_id=0x%02X, "
-			    "chip_id=0x%02X).\n", man_id, chip_id);
-			return -ENODEV;
-		}
+	/* identification */
+	man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID);
+	chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID);
+	if (man_id != 0x4D || chip_id != 0x04) {
+		dev_info(&adapter->dev,
+			 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n",
+			 man_id, chip_id);
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, "max1619", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 58f66be61b1..1da561e0cb3 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -534,7 +534,7 @@ static int max6650_detect(struct i2c_client *client, int kind,
 	struct i2c_adapter *adapter = client->adapter;
 	int address = client->addr;
 
-	dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind);
+	dev_dbg(&adapter->dev, "max6650_detect called\n");
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support "
@@ -542,23 +542,7 @@ static int max6650_detect(struct i2c_client *client, int kind,
 		return -ENODEV;
 	}
 
-	/*
-	 * Now we do the remaining detection. A negative kind means that
-	 * the driver was loaded with no force parameter (default), so we
-	 * must both detect and identify the chip (actually there is only
-	 * one possible kind of chip for now, max6650). A zero kind means that
-	 * the driver was loaded with the force parameter, the detection
-	 * step shall be skipped. A positive kind means that the driver
-	 * was loaded with the force parameter and a given kind of chip is
-	 * requested, so both the detection and the identification steps
-	 * are skipped.
-	 *
-	 * Currently I can find no way to distinguish between a MAX6650 and
-	 * a MAX6651. This driver has only been tried on the former.
-	 */
-
-	if ((kind < 0) &&
-	   (  (i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0)
+	if (((i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0)
 	    ||(i2c_smbus_read_byte_data(client, MAX6650_REG_GPIO_STAT) & 0xE0)
 	    ||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN) & 0xE0)
 	    ||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM) & 0xE0)
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index 8bb5cb532d4..4d88c045781 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -491,24 +491,22 @@ static int smsc47m192_detect(struct i2c_client *client, int kind,
 		return -ENODEV;
 
 	/* Detection criteria from sensors_detect script */
-	if (kind < 0) {
-		if (i2c_smbus_read_byte_data(client,
+	version = i2c_smbus_read_byte_data(client, SMSC47M192_REG_VERSION);
+	if (i2c_smbus_read_byte_data(client,
 				SMSC47M192_REG_COMPANY_ID) == 0x55
-		 && ((version = i2c_smbus_read_byte_data(client,
-				SMSC47M192_REG_VERSION)) & 0xf0) == 0x20
-		 && (i2c_smbus_read_byte_data(client,
+	 && (version & 0xf0) == 0x20
+	 && (i2c_smbus_read_byte_data(client,
 				SMSC47M192_REG_VID) & 0x70) == 0x00
-		 && (i2c_smbus_read_byte_data(client,
+	 && (i2c_smbus_read_byte_data(client,
 				SMSC47M192_REG_VID4) & 0xfe) == 0x80) {
-			dev_info(&adapter->dev,
-				 "found SMSC47M192 or compatible, "
-				 "version 2, stepping A%d\n", version & 0x0f);
-		} else {
-			dev_dbg(&adapter->dev,
-				"SMSC47M192 detection failed at 0x%02x\n",
-				client->addr);
-			return -ENODEV;
-		}
+		dev_info(&adapter->dev,
+			 "found SMSC47M192 or compatible, "
+			 "version 2, stepping A%d\n", version & 0x0f);
+	} else {
+		dev_dbg(&adapter->dev,
+			"SMSC47M192 detection failed at 0x%02x\n",
+			client->addr);
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 7d97431e132..1db9bc802f2 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -289,7 +289,6 @@ static int thmc50_detect(struct i2c_client *client, int kind,
 	unsigned revision;
 	unsigned config;
 	struct i2c_adapter *adapter = client->adapter;
-	int err = 0;
 	const char *type_name;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -301,31 +300,13 @@ static int thmc50_detect(struct i2c_client *client, int kind,
 	pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
 		 client->addr, i2c_adapter_id(client->adapter));
 
-	/* Now, we do the remaining detection. */
 	company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
 	revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
 	config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
+	if (revision < 0xc0 || (config & 0x10))
+		return -ENODEV;
 
-	if (kind == 0)
-		kind = thmc50;
-	else if (kind < 0) {
-		err = -ENODEV;
-		if (revision >= 0xc0 && ((config & 0x10) == 0)) {
-			if (company == 0x49) {
-				kind = thmc50;
-				err = 0;
-			} else if (company == 0x41) {
-				kind = adm1022;
-				err = 0;
-			}
-		}
-	}
-	if (err == -ENODEV) {
-		pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
-		return err;
-	}
-
-	if (kind == adm1022) {
+	if (company == 0x41) {
 		int id = i2c_adapter_id(client->adapter);
 		int i;
 
@@ -340,9 +321,13 @@ static int thmc50_detect(struct i2c_client *client, int kind,
 							  config);
 				break;
 			}
-	} else {
+	} else if (company == 0x49) {
 		type_name = "thmc50";
+	} else {
+		pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
+		return -ENODEV;
 	}
+
 	pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
 		 type_name, (revision >> 4) - 0xc, revision & 0xf);
 
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 47dd398f725..80a2191bf12 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1164,7 +1164,7 @@ ERROR_SC_0:
 static int w83793_detect(struct i2c_client *client, int kind,
 			 struct i2c_board_info *info)
 {
-	u8 tmp, bank;
+	u8 tmp, bank, chip_id;
 	struct i2c_adapter *adapter = client->adapter;
 	unsigned short address = client->addr;
 
@@ -1174,44 +1174,27 @@ static int w83793_detect(struct i2c_client *client, int kind,
 
 	bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
 
-	if (kind < 0) {
-		tmp = bank & 0x80 ? 0x5c : 0xa3;
-		/* Check Winbond vendor ID */
-		if (tmp != i2c_smbus_read_byte_data(client,
-							W83793_REG_VENDORID)) {
-			pr_debug("w83793: Detection failed at check "
-				 "vendor id\n");
-			return -ENODEV;
-		}
-
-		/* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
-		   should match */
-		if ((bank & 0x07) == 0
-		 && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
-		    (address << 1)) {
-			pr_debug("w83793: Detection failed at check "
-				 "i2c addr\n");
-			return -ENODEV;
-		}
-
+	tmp = bank & 0x80 ? 0x5c : 0xa3;
+	/* Check Winbond vendor ID */
+	if (tmp != i2c_smbus_read_byte_data(client, W83793_REG_VENDORID)) {
+		pr_debug("w83793: Detection failed at check vendor id\n");
+		return -ENODEV;
 	}
 
-	/* We have either had a force parameter, or we have already detected the
-	   Winbond. Determine the chip type now */
-
-	if (kind <= 0) {
-		if (0x7b == i2c_smbus_read_byte_data(client,
-						     W83793_REG_CHIPID)) {
-			kind = w83793;
-		} else {
-			if (kind == 0)
-				dev_warn(&adapter->dev, "w83793: Ignoring "
-					 "'force' parameter for unknown chip "
-					 "at address 0x%02x\n", address);
-			return -ENODEV;
-		}
+	/* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
+	   should match */
+	if ((bank & 0x07) == 0
+	 && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
+	    (address << 1)) {
+		pr_debug("w83793: Detection failed at check i2c addr\n");
+		return -ENODEV;
 	}
 
+	/* Determine the chip type now */
+	chip_id = i2c_smbus_read_byte_data(client, W83793_REG_CHIPID);
+	if (chip_id != 0x7b)
+		return -ENODEV;
+
 	strlcpy(info->type, "w83793", I2C_NAME_SIZE);
 
 	return 0;
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index badca769f35..27da7d2b15f 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -590,53 +590,31 @@ w83l786ng_detect(struct i2c_client *client, int kind,
 		 struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	u16 man_id;
+	u8 chip_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		return -ENODEV;
 	}
 
-	/*
-	 * Now we do the remaining detection. A negative kind means that
-	 * the driver was loaded with no force parameter (default), so we
-	 * must both detect and identify the chip (actually there is only
-	 * one possible kind of chip for now, W83L786NG). A zero kind means
-	 * that the driver was loaded with the force parameter, the detection
-	 * step shall be skipped. A positive kind means that the driver
-	 * was loaded with the force parameter and a given kind of chip is
-	 * requested, so both the detection and the identification steps
-	 * are skipped.
-	 */
-	if (kind < 0) { /* detection */
-		if (((w83l786ng_read_value(client,
-		    W83L786NG_REG_CONFIG) & 0x80) != 0x00)) {
-			dev_dbg(&adapter->dev,
-				"W83L786NG detection failed at 0x%02x.\n",
-				client->addr);
-			return -ENODEV;
-		}
+	/* Detection */
+	if ((w83l786ng_read_value(client, W83L786NG_REG_CONFIG) & 0x80)) {
+		dev_dbg(&adapter->dev, "W83L786NG detection failed at 0x%02x\n",
+			client->addr);
+		return -ENODEV;
 	}
 
-	if (kind <= 0) { /* identification */
-		u16 man_id;
-		u8 chip_id;
-
-		man_id = (w83l786ng_read_value(client,
-		    W83L786NG_REG_MAN_ID1) << 8) +
-		    w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2);
-		chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID);
-
-		if (man_id == 0x5CA3) { /* Winbond */
-			if (chip_id == 0x80) { /* W83L786NG */
-				kind = w83l786ng;
-			}
-		}
+	/* Identification */
+	man_id = (w83l786ng_read_value(client, W83L786NG_REG_MAN_ID1) << 8) +
+		 w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2);
+	chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID);
 
-		if (kind <= 0) { /* identification failed */
-			dev_info(&adapter->dev,
-			    "Unsupported chip (man_id=0x%04X, "
-			    "chip_id=0x%02X).\n", man_id, chip_id);
-			return -ENODEV;
-		}
+	if (man_id != 0x5CA3 ||		/* Winbond */
+	    chip_id != 0x80) {		/* W83L786NG */
+		dev_dbg(&adapter->dev,
+			"Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n",
+			man_id, chip_id);
+		return -ENODEV;
 	}
 
 	strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE);
-- 
cgit v1.2.3-18-g5258


From d1ebd59a74d764ab74cda8d09589b7ab5f5529fd Mon Sep 17 00:00:00 2001
From: Marc Hulsman <m.hulsman@tudelft.nl>
Date: Wed, 9 Dec 2009 20:35:58 +0100
Subject: hwmon: (w83791d) Remove experimental dependency

The w83791d driver has been in the kernel for a while now,
time to remove the EXPERIMENTAL dependency.

Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 87184b5f401..6e7c30b8caa 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -850,7 +850,7 @@ config SENSORS_W83781D
 
 config SENSORS_W83791D
 	tristate "Winbond W83791D"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the Winbond W83791D chip.
-- 
cgit v1.2.3-18-g5258


From 93ee0a75f6e4b2c7ec20fd8f4ace87f88ba785b9 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Wed, 9 Dec 2009 20:35:58 +0100
Subject: hwmon: Add Freescale MC13783 ADC driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This driver provides support for the ADC integrated into the
Freescale MC13783 PMIC.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/Kconfig       |   6 ++
 drivers/hwmon/Makefile      |   1 +
 drivers/hwmon/mc13783-adc.c | 236 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 243 insertions(+)
 create mode 100644 drivers/hwmon/mc13783-adc.c

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6e7c30b8caa..dd6939370f7 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1017,6 +1017,12 @@ config SENSORS_APPLESMC
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of applesmc.
 
+config SENSORS_MC13783_ADC
+        tristate "Freescale MC13783 ADC"
+        depends on MFD_MC13783
+        help
+          Support for the A/D converter on MC13783 PMIC.
+
 if ACPI
 
 comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index a24a52d12dc..33c2ee10528 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_SENSORS_LTC4245)	+= ltc4245.o
 obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
 obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
+obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
new file mode 100644
index 00000000000..883fa8197da
--- /dev/null
+++ b/drivers/hwmon/mc13783-adc.c
@@ -0,0 +1,236 @@
+/*
+ * Driver for the Freescale Semiconductor MC13783 adc.
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/mfd/mc13783-private.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#define MC13783_ADC_NAME	"mc13783-adc"
+
+struct mc13783_adc_priv {
+	struct mc13783 *mc13783;
+	struct device *hwmon_dev;
+};
+
+static ssize_t mc13783_adc_show_name(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	return sprintf(buf, "mc13783_adc\n");
+}
+
+static int mc13783_adc_read(struct device *dev,
+		struct device_attribute *devattr, unsigned int *val)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	unsigned int channel = attr->index;
+	unsigned int sample[4];
+	int ret;
+
+	ret = mc13783_adc_do_conversion(priv->mc13783,
+			MC13783_ADC_MODE_MULT_CHAN,
+			channel, sample);
+	if (ret)
+		return ret;
+
+	channel &= 0x7;
+
+	*val = (sample[channel % 4] >> (channel > 3 ? 14 : 2)) & 0x3ff;
+
+	return 0;
+}
+
+static ssize_t mc13783_adc_read_bp(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	unsigned val;
+	int ret = mc13783_adc_read(dev, devattr, &val);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * BP (channel 2) reports with offset 2.4V to the actual value to fit
+	 * the input range of the ADC.  unit = 2.25mV = 9/4 mV.
+	 */
+	val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400;
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t mc13783_adc_read_gp(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	unsigned val;
+	int ret = mc13783_adc_read(dev, devattr, &val);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * input range is [0, 2.3V], val has 10 bits, so each bit
+	 * is worth 9/4 mV.
+	 */
+	val = DIV_ROUND_CLOSEST(val * 9, 4);
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, mc13783_adc_show_name, NULL);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, mc13783_adc_read_bp, NULL, 2);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, mc13783_adc_read_gp, NULL, 5);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, mc13783_adc_read_gp, NULL, 6);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, mc13783_adc_read_gp, NULL, 7);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, mc13783_adc_read_gp, NULL, 8);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, mc13783_adc_read_gp, NULL, 9);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, mc13783_adc_read_gp, NULL, 10);
+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, mc13783_adc_read_gp, NULL, 11);
+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, mc13783_adc_read_gp, NULL, 12);
+static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, mc13783_adc_read_gp, NULL, 13);
+static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, mc13783_adc_read_gp, NULL, 14);
+static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, mc13783_adc_read_gp, NULL, 15);
+
+static struct attribute *mc13783_attr[] = {
+	&dev_attr_name.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in8_input.dev_attr.attr,
+	&sensor_dev_attr_in9_input.dev_attr.attr,
+	&sensor_dev_attr_in10_input.dev_attr.attr,
+	&sensor_dev_attr_in11_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mc13783_group = {
+	.attrs = mc13783_attr,
+};
+
+/* last four channels may be occupied by the touchscreen */
+static struct attribute *mc13783_attr_ts[] = {
+	&sensor_dev_attr_in12_input.dev_attr.attr,
+	&sensor_dev_attr_in13_input.dev_attr.attr,
+	&sensor_dev_attr_in14_input.dev_attr.attr,
+	&sensor_dev_attr_in15_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mc13783_group_ts = {
+	.attrs = mc13783_attr_ts,
+};
+
+static int __init mc13783_adc_probe(struct platform_device *pdev)
+{
+	struct mc13783_adc_priv *priv;
+	int ret;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+
+	platform_set_drvdata(pdev, priv);
+
+	/* Register sysfs hooks */
+	ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group);
+	if (ret)
+		goto out_err_create1;
+
+	if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+		ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts);
+		if (ret)
+			goto out_err_create2;
+
+	priv->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(priv->hwmon_dev)) {
+		ret = PTR_ERR(priv->hwmon_dev);
+		dev_err(&pdev->dev,
+				"hwmon_device_register failed with %d.\n", ret);
+		goto out_err_register;
+	}
+
+
+	return 0;
+
+out_err_register:
+
+	if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+		sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
+out_err_create2:
+
+	sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
+out_err_create1:
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(priv);
+
+	return ret;
+}
+
+static int __devexit mc13783_adc_remove(struct platform_device *pdev)
+{
+	struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(priv->hwmon_dev);
+
+	if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+		sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
+
+	sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(priv);
+
+	return 0;
+}
+
+static struct platform_driver mc13783_adc_driver = {
+	.remove 	= __devexit_p(mc13783_adc_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= MC13783_ADC_NAME,
+	},
+};
+
+static int __init mc13783_adc_init(void)
+{
+	return platform_driver_probe(&mc13783_adc_driver, mc13783_adc_probe);
+}
+
+static void __exit mc13783_adc_exit(void)
+{
+	platform_driver_unregister(&mc13783_adc_driver);
+}
+
+module_init(mc13783_adc_init);
+module_exit(mc13783_adc_exit);
+
+MODULE_DESCRIPTION("MC13783 ADC driver");
+MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MC13783_ADC_NAME);
-- 
cgit v1.2.3-18-g5258


From f95f0b4ce8cae533c3731e54a51892921db10ffe Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:35:59 +0100
Subject: hwmon: (thmc50) Stop using I2C_CLIENT_MODULE_PARM

The thmc50 driver is the last user of I2C_CLIENT_MODULE_PARM, and I
would like to get rid of that macro.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
 drivers/hwmon/thmc50.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 1db9bc802f2..4b793849c73 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -36,7 +36,11 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_2(thmc50, adm1022);
-I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
+
+static unsigned short adm1022_temp3[16];
+static unsigned int adm1022_temp3_num;
+module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0);
+MODULE_PARM_DESC(adm1022_temp3, "List of adapter,address pairs "
 			"to enable 3rd temperature (ADM1022 only)");
 
 /* Many THMC50 constants specified below */
-- 
cgit v1.2.3-18-g5258


From 66344aa6adc4397f79f134ad122072dbe5abcb48 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 9 Dec 2009 20:35:59 +0100
Subject: hwmon: (f71882fg) Cleanup sysfs attr creation 1/2

This patch makes a number of cleanups to the sysfs attr creation
in the f71882fg driver, this is a preparation patch for adding f71889fg
support:

* Add some comments to explain why some models need separate sysfs attr
  arrays for in / temp / fan / pwm
* Rename a number of sysfs attr arrays to make their function clearer
* Move the pwm#_auto_channels_temp attribute from the common to all
  models fan attr array to the per model auto mode pwm attr arrays, so
  that all the auto mode pwm attr are grouped together, and thus can be
  left out on models where we don't support auto pwm mode
* Put fan_beep attr in their own array, so that only auto mode pwm attr
  remain in the per model pwm sysfs attr arrays.
* Put the 4th special fan input for the f8000 in its own array, so that only
  auto mode pwm attr remain in the per model pwm sysfs attr arrays.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/f71882fg.c | 137 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 89 insertions(+), 48 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 4146105f1a5..40dd6cf3e80 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -258,7 +258,9 @@ static struct platform_driver f71882fg_driver = {
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
-/* Temp and in attr for the f71858fg */
+/* Temp and in attr for the f71858fg, the f71858fg is special as it
+   has its temperature indexes start at 0 (the others start at 1) and
+   it only has 3 voltage inputs */
 static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
 	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
@@ -302,8 +304,8 @@ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
 };
 
-/* Temp and in attr common to both the f71862fg and f71882fg */
-static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
+/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
 	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
 	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
 	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
@@ -371,8 +373,8 @@ static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3),
 };
 
-/* Temp and in attr found only on the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = {
+/* For models with in1 alarm capability */
+static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = {
 	SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
 		0, 1),
 	SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
@@ -383,6 +385,7 @@ static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = {
 /* Temp and in attr for the f8000
    Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
    is used as hysteresis value to clear alarms
+   Also like the f71858fg its temperature indexes start at 0
  */
 static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
 	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
@@ -435,39 +438,36 @@ static struct sensor_device_attribute_2 fxxxx_fan_attr[] = {
 		      store_pwm_enable, 0, 0),
 	SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR,
 		      show_pwm_interpolate, store_pwm_interpolate, 0, 0),
-	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
-		      show_pwm_auto_point_channel,
-		      store_pwm_auto_point_channel, 0, 0),
 
 	SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
 	SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
 		      store_pwm_enable, 0, 1),
 	SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR,
 		      show_pwm_interpolate, store_pwm_interpolate, 0, 1),
-	SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
-		      show_pwm_auto_point_channel,
-		      store_pwm_auto_point_channel, 0, 1),
 
 	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
 	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
 		      store_pwm_enable, 0, 2),
 	SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
 		      show_pwm_interpolate, store_pwm_interpolate, 0, 2),
-	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
-		      show_pwm_auto_point_channel,
-		      store_pwm_auto_point_channel, 0, 2),
 };
 
-/* Fan / PWM attr for the f71862fg, less pwms and less zones per pwm than the
-   f71882fg */
-static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
+/* Attr for models which can beep on Fan alarm */
+static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
 	SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
 		store_fan_beep, 0, 0),
 	SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
 		store_fan_beep, 0, 1),
 	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
 		store_fan_beep, 0, 2),
+};
 
+/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
+   f71858fg / f71882fg / f71889fg */
+static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
+	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 0),
 	SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      1, 0),
@@ -487,6 +487,9 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
 
+	SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 1),
 	SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      1, 1),
@@ -506,6 +509,9 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
 
+	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 2),
 	SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      1, 2),
@@ -526,8 +532,11 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
 };
 
-/* Fan / PWM attr common to both the f71882fg and f71858fg */
-static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
+/* PWM attr common to the f71858fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[] = {
+	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 0),
 	SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 0),
@@ -566,6 +575,9 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
 
+	SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 1),
 	SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 1),
@@ -604,6 +616,9 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
 
+	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 2),
 	SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 2),
@@ -644,14 +659,7 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
 };
 
 /* Fan / PWM attr found on the f71882fg but not on the f71858fg */
-static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
-	SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 0),
-	SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 1),
-	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 2),
-
+static struct sensor_device_attribute_2 f71882fg_auto_pwm_attr[] = {
 	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
 	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
 		      show_fan_full_speed,
@@ -707,12 +715,18 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 3),
 };
 
-/* Fan / PWM attr for the f8000, zones mapped to temp instead of to pwm!
-   Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
-   F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+/* Fan attr specific to the f8000 (4th fan input can only measure speed) */
 static struct sensor_device_attribute_2 f8000_fan_attr[] = {
 	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+};
 
+/* PWM attr for the f8000, zones mapped to temp instead of to pwm!
+   Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
+   F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = {
+	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 0),
 	SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 2),
@@ -751,6 +765,9 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = {
 	SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
 
+	SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 1),
 	SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 0),
@@ -789,6 +806,9 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = {
 	SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
 
+	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 2),
 	SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 1),
@@ -1847,15 +1867,15 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 			break;
 		case f71882fg:
 			err = f71882fg_create_sysfs_files(pdev,
-					f71882fg_in_temp_attr,
-					ARRAY_SIZE(f71882fg_in_temp_attr));
+					fxxxx_in1_alarm_attr,
+					ARRAY_SIZE(fxxxx_in1_alarm_attr));
 			if (err)
 				goto exit_unregister_sysfs;
 			/* fall through! */
 		case f71862fg:
 			err = f71882fg_create_sysfs_files(pdev,
-					f718x2fg_in_temp_attr,
-					ARRAY_SIZE(f718x2fg_in_temp_attr));
+					fxxxx_in_temp_attr,
+					ARRAY_SIZE(fxxxx_in_temp_attr));
 			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
@@ -1905,25 +1925,40 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		switch (data->type) {
 		case f71862fg:
 			err = f71882fg_create_sysfs_files(pdev,
-					f71862fg_fan_attr,
-					ARRAY_SIZE(f71862fg_fan_attr));
+					fxxxx_fan_beep_attr,
+					ARRAY_SIZE(fxxxx_fan_beep_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			err = f71882fg_create_sysfs_files(pdev,
+					f71862fg_auto_pwm_attr,
+					ARRAY_SIZE(f71862fg_auto_pwm_attr));
 			break;
 		case f71882fg:
 			err = f71882fg_create_sysfs_files(pdev,
-					f71882fg_fan_attr,
-					ARRAY_SIZE(f71882fg_fan_attr));
+					fxxxx_fan_beep_attr,
+					ARRAY_SIZE(fxxxx_fan_beep_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			err = f71882fg_create_sysfs_files(pdev,
+					f71882fg_auto_pwm_attr,
+					ARRAY_SIZE(f71882fg_auto_pwm_attr));
 			if (err)
 				goto exit_unregister_sysfs;
 			/* fall through! */
 		case f71858fg:
 			err = f71882fg_create_sysfs_files(pdev,
-					f71882fg_f71858fg_fan_attr,
-					ARRAY_SIZE(f71882fg_f71858fg_fan_attr));
+					fxxxx_auto_pwm_attr,
+					ARRAY_SIZE(fxxxx_auto_pwm_attr));
 			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
 					f8000_fan_attr,
 					ARRAY_SIZE(f8000_fan_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			err = f71882fg_create_sysfs_files(pdev,
+					f8000_auto_pwm_attr,
+					ARRAY_SIZE(f8000_auto_pwm_attr));
 			break;
 		}
 		if (err)
@@ -1965,22 +2000,28 @@ static int f71882fg_remove(struct platform_device *pdev)
 	   below are supersets of the ones skipped. */
 	device_remove_file(&pdev->dev, &dev_attr_name);
 
-	for (i = 0; i < ARRAY_SIZE(f718x2fg_in_temp_attr); i++)
+	for (i = 0; i < ARRAY_SIZE(fxxxx_in_temp_attr); i++)
 		device_remove_file(&pdev->dev,
-					&f718x2fg_in_temp_attr[i].dev_attr);
+					&fxxxx_in_temp_attr[i].dev_attr);
 
-	for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++)
+	for (i = 0; i < ARRAY_SIZE(fxxxx_in1_alarm_attr); i++)
 		device_remove_file(&pdev->dev,
-					&f71882fg_in_temp_attr[i].dev_attr);
+					&fxxxx_in1_alarm_attr[i].dev_attr);
 
 	for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++)
 		device_remove_file(&pdev->dev, &fxxxx_fan_attr[i].dev_attr);
 
-	for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++)
-		device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr);
+	for (i = 0; i < ARRAY_SIZE(fxxxx_fan_beep_attr); i++)
+		device_remove_file(&pdev->dev,
+				   &fxxxx_fan_beep_attr[i].dev_attr);
 
-	for (i = 0; i < ARRAY_SIZE(f8000_fan_attr); i++)
-		device_remove_file(&pdev->dev, &f8000_fan_attr[i].dev_attr);
+	for (i = 0; i < ARRAY_SIZE(f71882fg_auto_pwm_attr); i++)
+		device_remove_file(&pdev->dev,
+				   &f71882fg_auto_pwm_attr[i].dev_attr);
+
+	for (i = 0; i < ARRAY_SIZE(f8000_auto_pwm_attr); i++)
+		device_remove_file(&pdev->dev,
+				   &f8000_auto_pwm_attr[i].dev_attr);
 
 	kfree(data);
 
-- 
cgit v1.2.3-18-g5258


From b69b039922673dfabe0b5774f2e313f2a2297d01 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 9 Dec 2009 20:36:00 +0100
Subject: hwmon: (f71882fg) Cleanup sysfs attr creation 2/2

This patch merges the f71882fg_auto_pwm_attr array into the
fxxxx_fan_attr resp. fxxxx_auto_pwm_attr array, as the f71882fg_auto_pwm_attr
array was merely extending these 2 with entries for a 4th fan, it also makes
these 2 arrays 2 dimensional so that the rest of the code can choose to
add attr for 3 or 4 fans without needing to know the nr of attr per fan.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/f71882fg.c | 116 +++++++++++++++++++++--------------------------
 1 file changed, 52 insertions(+), 64 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 40dd6cf3e80..210ed6619df 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -416,41 +416,51 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
 };
 
 /* Fan / PWM attr common to all models */
-static struct sensor_device_attribute_2 fxxxx_fan_attr[] = {
+static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { {
 	SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0),
 	SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR,
 		      show_fan_full_speed,
 		      store_fan_full_speed, 0, 0),
 	SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0),
-	SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
-	SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
-		      show_fan_full_speed,
-		      store_fan_full_speed, 0, 1),
-	SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
-	SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
-	SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
-		      show_fan_full_speed,
-		      store_fan_full_speed, 0, 2),
-	SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
-
 	SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0),
 	SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
 		      store_pwm_enable, 0, 0),
 	SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR,
 		      show_pwm_interpolate, store_pwm_interpolate, 0, 0),
-
+}, {
+	SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
+	SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
+		      show_fan_full_speed,
+		      store_fan_full_speed, 0, 1),
+	SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
 	SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
 	SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
 		      store_pwm_enable, 0, 1),
 	SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR,
 		      show_pwm_interpolate, store_pwm_interpolate, 0, 1),
-
+}, {
+	SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
+	SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
+		      show_fan_full_speed,
+		      store_fan_full_speed, 0, 2),
+	SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
 	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
 	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
 		      store_pwm_enable, 0, 2),
 	SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
 		      show_pwm_interpolate, store_pwm_interpolate, 0, 2),
-};
+}, {
+	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
+		      show_fan_full_speed,
+		      store_fan_full_speed, 0, 3),
+	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
+	SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
+	SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+		      store_pwm_enable, 0, 3),
+	SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
+		      show_pwm_interpolate, store_pwm_interpolate, 0, 3),
+} };
 
 /* Attr for models which can beep on Fan alarm */
 static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
@@ -460,6 +470,8 @@ static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
 		store_fan_beep, 0, 1),
 	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
 		store_fan_beep, 0, 2),
+	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 3),
 };
 
 /* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
@@ -533,7 +545,7 @@ static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
 };
 
 /* PWM attr common to the f71858fg, f71882fg and f71889fg */
-static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[] = {
+static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { {
 	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_channel,
 		      store_pwm_auto_point_channel, 0, 0),
@@ -574,7 +586,7 @@ static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 2, 0),
 	SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
-
+}, {
 	SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_channel,
 		      store_pwm_auto_point_channel, 0, 1),
@@ -615,7 +627,7 @@ static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 2, 1),
 	SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
-
+}, {
 	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_channel,
 		      store_pwm_auto_point_channel, 0, 2),
@@ -656,23 +668,7 @@ static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 2, 2),
 	SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
-};
-
-/* Fan / PWM attr found on the f71882fg but not on the f71858fg */
-static struct sensor_device_attribute_2 f71882fg_auto_pwm_attr[] = {
-	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
-	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
-		      show_fan_full_speed,
-		      store_fan_full_speed, 0, 3),
-	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 3),
-	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
-
-	SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
-	SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
-		      store_pwm_enable, 0, 3),
-	SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
-		      show_pwm_interpolate, store_pwm_interpolate, 0, 3),
+}, {
 	SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_channel,
 		      store_pwm_auto_point_channel, 0, 3),
@@ -713,7 +709,7 @@ static struct sensor_device_attribute_2 f71882fg_auto_pwm_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 2, 3),
 	SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 3),
-};
+} };
 
 /* Fan attr specific to the f8000 (4th fan input can only measure speed) */
 static struct sensor_device_attribute_2 f8000_fan_attr[] = {
@@ -1917,39 +1913,24 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 			goto exit_unregister_sysfs;
 		}
 
-		err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr,
-					ARRAY_SIZE(fxxxx_fan_attr));
+		err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
+				ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
 		if (err)
 			goto exit_unregister_sysfs;
 
-		switch (data->type) {
-		case f71862fg:
+		if (data->type == f71862fg || data->type == f71882fg) {
 			err = f71882fg_create_sysfs_files(pdev,
-					fxxxx_fan_beep_attr,
-					ARRAY_SIZE(fxxxx_fan_beep_attr));
+					fxxxx_fan_beep_attr, nr_fans);
 			if (err)
 				goto exit_unregister_sysfs;
+		}
+
+		switch (data->type) {
+		case f71862fg:
 			err = f71882fg_create_sysfs_files(pdev,
 					f71862fg_auto_pwm_attr,
 					ARRAY_SIZE(f71862fg_auto_pwm_attr));
 			break;
-		case f71882fg:
-			err = f71882fg_create_sysfs_files(pdev,
-					fxxxx_fan_beep_attr,
-					ARRAY_SIZE(fxxxx_fan_beep_attr));
-			if (err)
-				goto exit_unregister_sysfs;
-			err = f71882fg_create_sysfs_files(pdev,
-					f71882fg_auto_pwm_attr,
-					ARRAY_SIZE(f71882fg_auto_pwm_attr));
-			if (err)
-				goto exit_unregister_sysfs;
-			/* fall through! */
-		case f71858fg:
-			err = f71882fg_create_sysfs_files(pdev,
-					fxxxx_auto_pwm_attr,
-					ARRAY_SIZE(fxxxx_auto_pwm_attr));
-			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
 					f8000_fan_attr,
@@ -1960,6 +1941,10 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 					f8000_auto_pwm_attr,
 					ARRAY_SIZE(f8000_auto_pwm_attr));
 			break;
+		default: /* f71858fg / f71882fg */
+			err = f71882fg_create_sysfs_files(pdev,
+				&fxxxx_auto_pwm_attr[0][0],
+				ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
 		}
 		if (err)
 			goto exit_unregister_sysfs;
@@ -1989,7 +1974,7 @@ exit_free:
 
 static int f71882fg_remove(struct platform_device *pdev)
 {
-	int i;
+	int i, j;
 	struct f71882fg_data *data = platform_get_drvdata(pdev);
 
 	platform_set_drvdata(pdev, NULL);
@@ -2009,15 +1994,18 @@ static int f71882fg_remove(struct platform_device *pdev)
 					&fxxxx_in1_alarm_attr[i].dev_attr);
 
 	for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++)
-		device_remove_file(&pdev->dev, &fxxxx_fan_attr[i].dev_attr);
+		for (j = 0; j < ARRAY_SIZE(fxxxx_fan_attr[0]); j++)
+			device_remove_file(&pdev->dev,
+					   &fxxxx_fan_attr[i][j].dev_attr);
 
 	for (i = 0; i < ARRAY_SIZE(fxxxx_fan_beep_attr); i++)
 		device_remove_file(&pdev->dev,
 				   &fxxxx_fan_beep_attr[i].dev_attr);
 
-	for (i = 0; i < ARRAY_SIZE(f71882fg_auto_pwm_attr); i++)
-		device_remove_file(&pdev->dev,
-				   &f71882fg_auto_pwm_attr[i].dev_attr);
+	for (i = 0; i < ARRAY_SIZE(fxxxx_auto_pwm_attr); i++)
+		for (j = 0; j < ARRAY_SIZE(fxxxx_auto_pwm_attr[0]); j++)
+			device_remove_file(&pdev->dev,
+					  &fxxxx_auto_pwm_attr[i][j].dev_attr);
 
 	for (i = 0; i < ARRAY_SIZE(f8000_auto_pwm_attr); i++)
 		device_remove_file(&pdev->dev,
-- 
cgit v1.2.3-18-g5258


From fc16c56e694d361388bae701894fd719dbc0f7eb Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 9 Dec 2009 20:36:01 +0100
Subject: hwmon: (f71882fg) Fix sysfs file removal

There is a bug in the old sysfs file removal, as it uses fxxxx_in_temp_attr
to remove the in and temp sysfs attributes, but fxxxx_in_temp_attr has
temp#_alarm, where as f71858fg_in_temp_attr has temp#_max_alarm, so
the temp#_max_alarm attributes for the f71858fg never get removed.

This patch fixes this by doing the sysfs removal exactly the same way as
the creation instead of being (too) clever, this will also avoid similar
bugs in the future.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/f71882fg.c | 91 +++++++++++++++++++++++++++++++++++-------------
 1 file changed, 66 insertions(+), 25 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 210ed6619df..3a695f06905 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1810,6 +1810,15 @@ static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev,
 	return 0;
 }
 
+static void f71882fg_remove_sysfs_files(struct platform_device *pdev,
+	struct sensor_device_attribute_2 *attr, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		device_remove_file(&pdev->dev, &attr[i].dev_attr);
+}
+
 static int __devinit f71882fg_probe(struct platform_device *pdev)
 {
 	struct f71882fg_data *data;
@@ -1974,42 +1983,74 @@ exit_free:
 
 static int f71882fg_remove(struct platform_device *pdev)
 {
-	int i, j;
 	struct f71882fg_data *data = platform_get_drvdata(pdev);
+	int nr_fans = (data->type == f71882fg) ? 4 : 3;
+	u8 start_reg = f71882fg_read8(data, F71882FG_REG_START);
 
 	platform_set_drvdata(pdev, NULL);
 	if (data->hwmon_dev)
 		hwmon_device_unregister(data->hwmon_dev);
 
-	/* Note we are not looping over all attr arrays we have as the ones
-	   below are supersets of the ones skipped. */
 	device_remove_file(&pdev->dev, &dev_attr_name);
 
-	for (i = 0; i < ARRAY_SIZE(fxxxx_in_temp_attr); i++)
-		device_remove_file(&pdev->dev,
-					&fxxxx_in_temp_attr[i].dev_attr);
-
-	for (i = 0; i < ARRAY_SIZE(fxxxx_in1_alarm_attr); i++)
-		device_remove_file(&pdev->dev,
-					&fxxxx_in1_alarm_attr[i].dev_attr);
-
-	for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++)
-		for (j = 0; j < ARRAY_SIZE(fxxxx_fan_attr[0]); j++)
-			device_remove_file(&pdev->dev,
-					   &fxxxx_fan_attr[i][j].dev_attr);
+	if (start_reg & 0x01) {
+		switch (data->type) {
+		case f71858fg:
+			if (data->temp_config & 0x10)
+				f71882fg_remove_sysfs_files(pdev,
+					f8000_in_temp_attr,
+					ARRAY_SIZE(f8000_in_temp_attr));
+			else
+				f71882fg_remove_sysfs_files(pdev,
+					f71858fg_in_temp_attr,
+					ARRAY_SIZE(f71858fg_in_temp_attr));
+			break;
+		case f71882fg:
+			f71882fg_remove_sysfs_files(pdev,
+					fxxxx_in1_alarm_attr,
+					ARRAY_SIZE(fxxxx_in1_alarm_attr));
+			/* fall through! */
+		case f71862fg:
+			f71882fg_remove_sysfs_files(pdev,
+					fxxxx_in_temp_attr,
+					ARRAY_SIZE(fxxxx_in_temp_attr));
+			break;
+		case f8000:
+			f71882fg_remove_sysfs_files(pdev,
+					f8000_in_temp_attr,
+					ARRAY_SIZE(f8000_in_temp_attr));
+			break;
+		}
+	}
 
-	for (i = 0; i < ARRAY_SIZE(fxxxx_fan_beep_attr); i++)
-		device_remove_file(&pdev->dev,
-				   &fxxxx_fan_beep_attr[i].dev_attr);
+	if (start_reg & 0x02) {
+		f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
+				ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
 
-	for (i = 0; i < ARRAY_SIZE(fxxxx_auto_pwm_attr); i++)
-		for (j = 0; j < ARRAY_SIZE(fxxxx_auto_pwm_attr[0]); j++)
-			device_remove_file(&pdev->dev,
-					  &fxxxx_auto_pwm_attr[i][j].dev_attr);
+		if (data->type == f71862fg || data->type == f71882fg)
+			f71882fg_remove_sysfs_files(pdev,
+					fxxxx_fan_beep_attr, nr_fans);
 
-	for (i = 0; i < ARRAY_SIZE(f8000_auto_pwm_attr); i++)
-		device_remove_file(&pdev->dev,
-				   &f8000_auto_pwm_attr[i].dev_attr);
+		switch (data->type) {
+		case f71862fg:
+			f71882fg_remove_sysfs_files(pdev,
+					f71862fg_auto_pwm_attr,
+					ARRAY_SIZE(f71862fg_auto_pwm_attr));
+			break;
+		case f8000:
+			f71882fg_remove_sysfs_files(pdev,
+					f8000_fan_attr,
+					ARRAY_SIZE(f8000_fan_attr));
+			f71882fg_remove_sysfs_files(pdev,
+					f8000_auto_pwm_attr,
+					ARRAY_SIZE(f8000_auto_pwm_attr));
+			break;
+		default: /* f71858fg / f71882fg / f71889fg */
+			f71882fg_remove_sysfs_files(pdev,
+				&fxxxx_auto_pwm_attr[0][0],
+				ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+		}
+	}
 
 	kfree(data);
 
-- 
cgit v1.2.3-18-g5258


From 7669896f499e1bce5cfb38f2685ff583ecdb24dd Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 9 Dec 2009 20:36:01 +0100
Subject: hwmon: (f71882fg) Add support for the f71889fg (version 2)

This adds support for the Fintek f71889fg to the f71882fg driver,
many thanks to Gerd v. Egidy for providing (remote) access to a
machine which such an ic.

Note that this bit of the patch:
-	val = SENSORS_LIMIT(val, 0, 255);
+
+	if (data->type == f71889fg)
+		val = SENSORS_LIMIT(val, -128, 127);
+	else
+		val = SENSORS_LIMIT(val, 0, 127);

Changes behaviour for already supported models, the new behaviour is correct
as the already supported models have bit 7 of the involved registers fixed at
0, so the previous behaviour which allowed setting temp zone limits > 127
was not correct.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/Kconfig    |  6 ++--
 drivers/hwmon/f71882fg.c | 86 ++++++++++++++++++++++++++++++++++++++----------
 2 files changed, 71 insertions(+), 21 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index dd6939370f7..edf8febb5bc 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -305,12 +305,12 @@ config SENSORS_F71805F
 	  will be called f71805f.
 
 config SENSORS_F71882FG
-	tristate "Fintek F71858FG, F71862FG, F71882FG and F8000"
+	tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
 	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
-	  features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG
-	  and F8000 Super-I/O chips.
+	  features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
+	  F71889FG and F8000 Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called f71882fg.
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 3a695f06905..a95fa4256ca 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -48,6 +48,7 @@
 #define SIO_F71858_ID		0x0507  /* Chipset ID */
 #define SIO_F71862_ID		0x0601	/* Chipset ID */
 #define SIO_F71882_ID		0x0541	/* Chipset ID */
+#define SIO_F71889_ID		0x0723	/* Chipset ID */
 #define SIO_F8000_ID		0x0581	/* Chipset ID */
 
 #define REGION_LENGTH		8
@@ -95,12 +96,13 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-enum chips { f71858fg, f71862fg, f71882fg, f8000 };
+enum chips { f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
 
 static const char *f71882fg_names[] = {
 	"f71858fg",
 	"f71862fg",
 	"f71882fg",
+	"f71889fg",
 	"f8000",
 };
 
@@ -155,7 +157,7 @@ struct f71882fg_data {
 	u8	pwm_auto_point_hyst[2];
 	u8	pwm_auto_point_mapping[4];
 	u8	pwm_auto_point_pwm[4][5];
-	u8	pwm_auto_point_temp[4][4];
+	s8	pwm_auto_point_temp[4][4];
 };
 
 /* Sysfs in */
@@ -945,7 +947,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 	/* Update once every 60 seconds */
 	if ( time_after(jiffies, data->last_limits + 60 * HZ ) ||
 			!data->valid) {
-		if (data->type == f71882fg) {
+		if (data->type == f71882fg || data->type == f71889fg) {
 			data->in1_max =
 				f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
 			data->in_beep =
@@ -967,7 +969,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 						F71882FG_REG_TEMP_HYST(1));
 		}
 
-		if (data->type == f71862fg || data->type == f71882fg) {
+		if (data->type == f71862fg || data->type == f71882fg ||
+		    data->type == f71889fg) {
 			data->fan_beep = f71882fg_read8(data,
 						F71882FG_REG_FAN_BEEP);
 			data->temp_beep = f71882fg_read8(data,
@@ -977,15 +980,33 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 			data->temp_type[2] = (reg & 0x04) ? 2 : 4;
 			data->temp_type[3] = (reg & 0x08) ? 2 : 4;
 		}
-		reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
-		if ((reg2 & 0x03) == 0x01)
-			data->temp_type[1] = 6 /* PECI */;
-		else if ((reg2 & 0x03) == 0x02)
-			data->temp_type[1] = 5 /* AMDSI */;
-		else if (data->type == f71862fg || data->type == f71882fg)
-			data->temp_type[1] = (reg & 0x02) ? 2 : 4;
-		else
-			data->temp_type[1] = 2; /* Only supports BJT */
+		/* Determine temp index 1 sensor type */
+		if (data->type == f71889fg) {
+			reg2 = f71882fg_read8(data, F71882FG_REG_START);
+			switch ((reg2 & 0x60) >> 5) {
+			case 0x00: /* BJT / Thermistor */
+				data->temp_type[1] = (reg & 0x02) ? 2 : 4;
+				break;
+			case 0x01: /* AMDSI */
+				data->temp_type[1] = 5;
+				break;
+			case 0x02: /* PECI */
+			case 0x03: /* Ibex Peak ?? Report as PECI for now */
+				data->temp_type[1] = 6;
+				break;
+			}
+		} else {
+			reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
+			if ((reg2 & 0x03) == 0x01)
+				data->temp_type[1] = 6; /* PECI */
+			else if ((reg2 & 0x03) == 0x02)
+				data->temp_type[1] = 5; /* AMDSI */
+			else if (data->type == f71862fg ||
+				 data->type == f71882fg)
+				data->temp_type[1] = (reg & 0x02) ? 2 : 4;
+			else /* f71858fg and f8000 only support BJT */
+				data->temp_type[1] = 2;
+		}
 
 		data->pwm_enable = f71882fg_read8(data,
 						  F71882FG_REG_PWM_ENABLE);
@@ -1062,7 +1083,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 		if (data->type == f8000)
 			data->fan[3] = f71882fg_read16(data,
 						F71882FG_REG_FAN(3));
-		if (data->type == f71882fg)
+		if (data->type == f71882fg || data->type == f71889fg)
 			data->in_status = f71882fg_read8(data,
 						F71882FG_REG_IN_STATUS);
 		for (nr = 0; nr < nr_ins; nr++)
@@ -1780,7 +1801,11 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev,
 	int pwm = to_sensor_dev_attr_2(devattr)->index;
 	int point = to_sensor_dev_attr_2(devattr)->nr;
 	long val = simple_strtol(buf, NULL, 10) / 1000;
-	val = SENSORS_LIMIT(val, 0, 255);
+
+	if (data->type == f71889fg)
+		val = SENSORS_LIMIT(val, -128, 127);
+	else
+		val = SENSORS_LIMIT(val, 0, 127);
 
 	mutex_lock(&data->update_lock);
 	f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val);
@@ -1871,6 +1896,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 					ARRAY_SIZE(f71858fg_in_temp_attr));
 			break;
 		case f71882fg:
+		case f71889fg:
 			err = f71882fg_create_sysfs_files(pdev,
 					fxxxx_in1_alarm_attr,
 					ARRAY_SIZE(fxxxx_in1_alarm_attr));
@@ -1908,6 +1934,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 			err = (data->pwm_enable & 0x15) != 0x15;
 			break;
 		case f71882fg:
+		case f71889fg:
 			err = 0;
 			break;
 		case f8000:
@@ -1927,7 +1954,8 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		if (err)
 			goto exit_unregister_sysfs;
 
-		if (data->type == f71862fg || data->type == f71882fg) {
+		if (data->type == f71862fg || data->type == f71882fg ||
+		    data->type == f71889fg) {
 			err = f71882fg_create_sysfs_files(pdev,
 					fxxxx_fan_beep_attr, nr_fans);
 			if (err)
@@ -1950,6 +1978,22 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 					f8000_auto_pwm_attr,
 					ARRAY_SIZE(f8000_auto_pwm_attr));
 			break;
+		case f71889fg:
+			for (i = 0; i < nr_fans; i++) {
+				data->pwm_auto_point_mapping[i] =
+					f71882fg_read8(data,
+						F71882FG_REG_POINT_MAPPING(i));
+				if (data->pwm_auto_point_mapping[i] & 0x80)
+					break;
+			}
+			if (i != nr_fans) {
+				dev_warn(&pdev->dev,
+					 "Auto pwm controlled by raw digital "
+					 "data, disabling pwm auto_point "
+					 "sysfs attributes\n");
+				break;
+			}
+			/* fall through */
 		default: /* f71858fg / f71882fg */
 			err = f71882fg_create_sysfs_files(pdev,
 				&fxxxx_auto_pwm_attr[0][0],
@@ -2006,6 +2050,7 @@ static int f71882fg_remove(struct platform_device *pdev)
 					ARRAY_SIZE(f71858fg_in_temp_attr));
 			break;
 		case f71882fg:
+		case f71889fg:
 			f71882fg_remove_sysfs_files(pdev,
 					fxxxx_in1_alarm_attr,
 					ARRAY_SIZE(fxxxx_in1_alarm_attr));
@@ -2027,7 +2072,8 @@ static int f71882fg_remove(struct platform_device *pdev)
 		f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
 				ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
 
-		if (data->type == f71862fg || data->type == f71882fg)
+		if (data->type == f71862fg || data->type == f71882fg ||
+		    data->type == f71889fg)
 			f71882fg_remove_sysfs_files(pdev,
 					fxxxx_fan_beep_attr, nr_fans);
 
@@ -2082,11 +2128,15 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 	case SIO_F71882_ID:
 		sio_data->type = f71882fg;
 		break;
+	case SIO_F71889_ID:
+		sio_data->type = f71889fg;
+		break;
 	case SIO_F8000_ID:
 		sio_data->type = f8000;
 		break;
 	default:
-		printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n");
+		printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
+		       (unsigned int)devid);
 		goto exit;
 	}
 
-- 
cgit v1.2.3-18-g5258


From b180d0508475c5c55085839d22f454c69379eacc Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:02 +0100
Subject: hwmon: (adt7475) Add support for the ADT7473

Add support for the ADT7473 to the adt7475 driver, and mark the
adt7473 driver for removal. The ADT7473 and ADT7475 chips are almost
the same chip and essentially compatible, so there's no point in
having separate drivers for them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/Kconfig   | 10 +++++++---
 drivers/hwmon/adt7473.c |  3 ++-
 drivers/hwmon/adt7475.c | 25 +++++++++++++++++--------
 3 files changed, 26 insertions(+), 12 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index edf8febb5bc..5b2eaff4790 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -191,21 +191,25 @@ config SENSORS_ADT7470
 	  will be called adt7470.
 
 config SENSORS_ADT7473
-	tristate "Analog Devices ADT7473"
+	tristate "Analog Devices ADT7473 (DEPRECATED)"
 	depends on I2C && EXPERIMENTAL
+	select SENSORS_ADT7475
 	help
 	  If you say yes here you get support for the Analog Devices
 	  ADT7473 temperature monitoring chips.
 
+	  This driver is deprecated, you should use the adt7475 driver
+	  instead.
+
 	  This driver can also be built as a module. If so, the module
 	  will be called adt7473.
 
 config SENSORS_ADT7475
-	tristate "Analog Devices ADT7475"
+	tristate "Analog Devices ADT7473 and ADT7475"
 	depends on I2C && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the Analog Devices
-	  ADT7475 hardware monitoring chips.
+	  ADT7473 and ADT7475 hardware monitoring chips.
 
 	  This driver can also be build as a module.  If so, the module
 	  will be called adt7475.
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 97ef50833f6..aea244db974 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -174,7 +174,6 @@ static const struct i2c_device_id adt7473_id[] = {
 	{ "adt7473", adt7473 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, adt7473_id);
 
 static struct i2c_driver adt7473_driver = {
 	.class		= I2C_CLASS_HWMON,
@@ -1166,6 +1165,8 @@ static int adt7473_remove(struct i2c_client *client)
 
 static int __init adt7473_init(void)
 {
+	pr_notice("The adt7473 driver is deprecated, please use the adt7475 "
+		  "driver instead\n");
 	return i2c_add_driver(&adt7473_driver);
 }
 
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 41d3e38f9ce..fba2f016e4d 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -113,11 +113,12 @@
 #define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
 #define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
 
-static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
-I2C_CLIENT_INSMOD_1(adt7475);
+I2C_CLIENT_INSMOD_2(adt7473, adt7475);
 
 static const struct i2c_device_id adt7475_id[] = {
+	{ "adt7473", adt7473 },
 	{ "adt7475", adt7475 },
 	{ }
 };
@@ -970,19 +971,27 @@ static int adt7475_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	int vendid, devid;
+	const char *name;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (adt7475_read(REG_VENDID) != 0x41 ||
-	    adt7475_read(REG_DEVID) != 0x75) {
-		dev_err(&adapter->dev,
-			"Couldn't detect a adt7475 part at 0x%02x\n",
-			(unsigned int)client->addr);
+	vendid = adt7475_read(REG_VENDID);
+	devid = adt7475_read(REG_DEVID);
+
+	if (vendid == 0x41 && devid == 0x73)
+		name = "adt7473";
+	else if (vendid == 0x41 && devid == 0x75 && client->addr == 0x2e)
+		name = "adt7475";
+	else {
+		dev_dbg(&adapter->dev,
+			"Couldn't detect an ADT7473 or ADT7475 part at "
+			"0x%02x\n", (unsigned int)client->addr);
 		return -ENODEV;
 	}
 
-	strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE);
+	strlcpy(info->type, name, I2C_NAME_SIZE);
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From f99318b2540da75e663603e1a0faef30a3bb0c92 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:03 +0100
Subject: hwmon: (adt7475) Implement pwm_use_point2_pwm_at_crit

Implement the non-standard pwm_use_point2_pwm_at_crit sysfs attribute
as the adt7473 driver did.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/adt7475.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index fba2f016e4d..188ae428ccd 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -76,6 +76,9 @@
 #define REG_EXTEND1		0x76
 #define REG_EXTEND2		0x77
 #define REG_CONFIG5		0x7C
+#define REG_CONFIG4		0x7D
+
+#define CONFIG4_MAXDUTY		0x08
 
 #define CONFIG5_TWOSCOMP	0x01
 #define CONFIG5_TEMPOFFSET	0x02
@@ -132,6 +135,7 @@ struct adt7475_data {
 	unsigned long limits_updated;
 	char valid;
 
+	u8 config4;
 	u8 config5;
 	u16 alarms;
 	u16 voltage[3][3];
@@ -779,6 +783,38 @@ static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static ssize_t show_pwm_at_crit(struct device *dev,
+				struct device_attribute *devattr, char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY));
+}
+
+static ssize_t set_pwm_at_crit(struct device *dev,
+			       struct device_attribute *devattr,
+			       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	data->config4 = i2c_smbus_read_byte_data(client, REG_CONFIG4);
+	if (val)
+		data->config4 |= CONFIG4_MAXDUTY;
+	else
+		data->config4 &= ~CONFIG4_MAXDUTY;
+	i2c_smbus_write_byte_data(client, REG_CONFIG4, data->config4);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
 static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
 			    set_voltage, MAX, 0);
@@ -894,6 +930,10 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MAX, 2);
 
+/* Non-standard name, might need revisiting */
+static DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
+		   show_pwm_at_crit, set_pwm_at_crit);
+
 static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_max.dev_attr.attr,
@@ -962,6 +1002,7 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	&dev_attr_pwm_use_point2_pwm_at_crit.attr,
 	NULL,
 };
 
@@ -1160,6 +1201,7 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 	/* Limits and settings, should never change update every 60 seconds */
 	if (time_after(jiffies, data->limits_updated + HZ * 60) ||
 	    !data->valid) {
+		data->config4 = adt7475_read(REG_CONFIG4);
 		data->config5 = adt7475_read(REG_CONFIG5);
 
 		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
-- 
cgit v1.2.3-18-g5258


From cffb9dd07fea8865093f6ccfb51d686487b89415 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:03 +0100
Subject: hwmon: (adt7475) Rework voltage inputs handling

Rework the handling of voltage inputs to make it possible and easy to
support more inputs. This will be needed for the upcoming ADT7490
support.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/adt7475.c | 83 ++++++++++++++++++++++++++++---------------------
 1 file changed, 48 insertions(+), 35 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 188ae428ccd..e9f69ee197d 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -39,7 +39,7 @@
 
 /* 7475 Common Registers */
 
-#define REG_VOLTAGE_BASE	0x21
+#define REG_VOLTAGE_BASE	0x20
 #define REG_TEMP_BASE		0x25
 #define REG_TACH_BASE		0x28
 #define REG_PWM_BASE		0x30
@@ -51,8 +51,8 @@
 #define REG_STATUS1		0x41
 #define REG_STATUS2		0x42
 
-#define REG_VOLTAGE_MIN_BASE	0x46
-#define REG_VOLTAGE_MAX_BASE	0x47
+#define REG_VOLTAGE_MIN_BASE	0x44
+#define REG_VOLTAGE_MAX_BASE	0x45
 
 #define REG_TEMP_MIN_BASE	0x4E
 #define REG_TEMP_MAX_BASE	0x4F
@@ -85,7 +85,7 @@
 
 /* ADT7475 Settings */
 
-#define ADT7475_VOLTAGE_COUNT	2
+#define ADT7475_VOLTAGE_COUNT	5	/* Not counting Vtt */
 #define ADT7475_TEMP_COUNT	3
 #define ADT7475_TACH_COUNT	4
 #define ADT7475_PWM_COUNT	3
@@ -137,8 +137,9 @@ struct adt7475_data {
 
 	u8 config4;
 	u8 config5;
+	u8 has_voltage;
 	u16 alarms;
-	u16 voltage[3][3];
+	u16 voltage[3][6];
 	u16 temp[7][3];
 	u16 tach[2][4];
 	u8 pwm[4][3];
@@ -201,26 +202,30 @@ static inline u16 rpm2tach(unsigned long rpm)
 	return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
 }
 
-static inline int reg2vcc(u16 reg)
-{
-	return (4296 * reg) / 1000;
-}
+/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */
+static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = {
+	{ 45, 94 },	/* +2.5V */
+	{ 175, 525 },	/* Vccp */
+	{ 68, 71 },	/* Vcc */
+	{ 93, 47 },	/* +5V */
+	{ 120, 20 },	/* +12V */
+	{ 45, 45 },	/* Vtt */
+};
 
-static inline int reg2vccp(u16 reg)
+static inline int reg2volt(int channel, u16 reg)
 {
-	return (2929 * reg) / 1000;
-}
+	const int *r = adt7473_in_scaling[channel];
 
-static inline u16 vcc2reg(long vcc)
-{
-	vcc = SENSORS_LIMIT(vcc, 0, 4396);
-	return (vcc * 1000) / 4296;
+	return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024);
 }
 
-static inline u16 vccp2reg(long vcc)
+static inline u16 volt2reg(int channel, long volt)
 {
-	vcc = SENSORS_LIMIT(vcc, 0, 2998);
-	return (vcc * 1000) / 2929;
+	const int *r = adt7473_in_scaling[channel];
+	long reg;
+
+	reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
+	return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2);
 }
 
 static u16 adt7475_read_word(struct i2c_client *client, int reg)
@@ -276,12 +281,10 @@ static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
 	switch (sattr->nr) {
 	case ALARM:
 		return sprintf(buf, "%d\n",
-			       (data->alarms >> (sattr->index + 1)) & 1);
+			       (data->alarms >> sattr->index) & 1);
 	default:
 		val = data->voltage[sattr->nr][sattr->index];
-		return sprintf(buf, "%d\n",
-			       sattr->index ==
-			       0 ? reg2vccp(val) : reg2vcc(val));
+		return sprintf(buf, "%d\n", reg2volt(sattr->index, val));
 	}
 }
 
@@ -300,8 +303,7 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
 
 	mutex_lock(&data->lock);
 
-	data->voltage[sattr->nr][sattr->index] =
-		sattr->index ? vcc2reg(val) : vccp2reg(val);
+	data->voltage[sattr->nr][sattr->index] = volt2reg(sattr->index, val);
 
 	if (sattr->nr == MIN)
 		reg = VOLTAGE_MIN_REG(sattr->index);
@@ -815,18 +817,18 @@ static ssize_t set_pwm_at_crit(struct device *dev,
 	return count;
 }
 
-static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
 static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
-			    set_voltage, MAX, 0);
+			    set_voltage, MAX, 1);
 static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
-			    set_voltage, MIN, 0);
-static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
-static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
+			    set_voltage, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 2);
 static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
-			    set_voltage, MAX, 1);
+			    set_voltage, MAX, 2);
 static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
-			    set_voltage, MIN, 1);
-static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+			    set_voltage, MIN, 2);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2);
 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
@@ -1050,6 +1052,12 @@ static int adt7475_probe(struct i2c_client *client,
 	mutex_init(&data->lock);
 	i2c_set_clientdata(client, data);
 
+	/* Initialize device-specific values */
+	switch (id->driver_data) {
+	default:
+		data->has_voltage = 0x06;	/* in1, in2 */
+	}
+
 	/* Call adt7475_read_pwm for all pwm's as this will reprogram any
 	   pwm's which are disabled to manual mode with 0% duty cycle */
 	for (i = 0; i < ADT7475_PWM_COUNT; i++)
@@ -1176,10 +1184,13 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 		data->alarms |= adt7475_read(REG_STATUS1);
 
 		ext = adt7475_read(REG_EXTEND1);
-		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++)
+		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+			if (!(data->has_voltage & (1 << i)))
+				continue;
 			data->voltage[INPUT][i] =
 				(adt7475_read(VOLTAGE_REG(i)) << 2) |
-				((ext >> ((i + 1) * 2)) & 3);
+				((ext >> (i * 2)) & 3);
+		}
 
 		ext = adt7475_read(REG_EXTEND2);
 		for (i = 0; i < ADT7475_TEMP_COUNT; i++)
@@ -1205,6 +1216,8 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 		data->config5 = adt7475_read(REG_CONFIG5);
 
 		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+			if (!(data->has_voltage & (1 << i)))
+				continue;
 			/* Adjust values so they match the input precision */
 			data->voltage[MIN][i] =
 				adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
-- 
cgit v1.2.3-18-g5258


From 54ecb9e3c194687eebabe7ca45bae889ac1cd4de Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:03 +0100
Subject: hwmon: (adt7475) Add missing static marker

adt7475_attr_group is used internally only and can thus be marked
static.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/adt7475.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index e9f69ee197d..20bab51e16f 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -1008,7 +1008,7 @@ static struct attribute *adt7475_attrs[] = {
 	NULL,
 };
 
-struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
 
 static int adt7475_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
-- 
cgit v1.2.3-18-g5258


From d656b6fde2531a13c4e68a3ce6b9f12bc19d96bb Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:04 +0100
Subject: hwmon: (adt7475) Improve device detection

Check the value of register 0x3f as part of the device detection, to
make it more robust.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/adt7475.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 20bab51e16f..520773b1654 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -47,6 +47,7 @@
 
 #define REG_DEVID		0x3D
 #define REG_VENDID		0x3E
+#define REG_DEVID2		0x3F
 
 #define REG_STATUS1		0x41
 #define REG_STATUS2		0x42
@@ -1014,18 +1015,22 @@ static int adt7475_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	int vendid, devid;
+	int vendid, devid, devid2;
 	const char *name;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
 	vendid = adt7475_read(REG_VENDID);
-	devid = adt7475_read(REG_DEVID);
+	devid2 = adt7475_read(REG_DEVID2);
+	if (vendid != 0x41 ||		/* Analog Devices */
+	    (devid2 & 0xf8) != 0x68)
+		return -ENODEV;
 
-	if (vendid == 0x41 && devid == 0x73)
+	devid = adt7475_read(REG_DEVID);
+	if (devid == 0x73)
 		name = "adt7473";
-	else if (vendid == 0x41 && devid == 0x75 && client->addr == 0x2e)
+	else if (devid == 0x75 && client->addr == 0x2e)
 		name = "adt7475";
 	else {
 		dev_dbg(&adapter->dev,
-- 
cgit v1.2.3-18-g5258


From 3d849981711741e76e501e4b9e3e7b792f2b0fd5 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:05 +0100
Subject: hwmon: (adt7475) Add support for the ADT7490

Add support for the Analog Devices ADT7490 chip. This chip is largely
compatible with the ADT7473 and ADT7475, with additional features.
In particular, it has 6 voltage inputs instead of 2.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/Kconfig   |   4 +-
 drivers/hwmon/adt7475.c | 115 +++++++++++++++++++++++++++++++++++++++++++-----
 2 files changed, 105 insertions(+), 14 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 5b2eaff4790..f9f4365349b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -205,11 +205,11 @@ config SENSORS_ADT7473
 	  will be called adt7473.
 
 config SENSORS_ADT7475
-	tristate "Analog Devices ADT7473 and ADT7475"
+	tristate "Analog Devices ADT7473, ADT7475 and ADT7490"
 	depends on I2C && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the Analog Devices
-	  ADT7473 and ADT7475 hardware monitoring chips.
+	  ADT7473, ADT7475 and ADT7490 hardware monitoring chips.
 
 	  This driver can also be build as a module.  If so, the module
 	  will be called adt7475.
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 520773b1654..e495665569e 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -3,7 +3,8 @@
  * Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
  * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
  * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
-
+ * Copyright (C) 2009 Jean Delvare <khali@linux-fr.org>
+ *
  * Derived from the lm83 driver by Jean Delvare
  *
  * This program is free software; you can redistribute it and/or modify
@@ -39,6 +40,9 @@
 
 /* 7475 Common Registers */
 
+#define REG_VTT			0x1E	/* ADT7490 only */
+#define REG_EXTEND3		0x1F	/* ADT7490 only */
+
 #define REG_VOLTAGE_BASE	0x20
 #define REG_TEMP_BASE		0x25
 #define REG_TACH_BASE		0x28
@@ -79,6 +83,11 @@
 #define REG_CONFIG5		0x7C
 #define REG_CONFIG4		0x7D
 
+#define REG_STATUS4		0x81	/* ADT7490 only */
+
+#define REG_VTT_MIN		0x84	/* ADT7490 only */
+#define REG_VTT_MAX		0x86	/* ADT7490 only */
+
 #define CONFIG4_MAXDUTY		0x08
 
 #define CONFIG5_TWOSCOMP	0x01
@@ -119,11 +128,12 @@
 
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
-I2C_CLIENT_INSMOD_2(adt7473, adt7475);
+I2C_CLIENT_INSMOD_3(adt7473, adt7475, adt7490);
 
 static const struct i2c_device_id adt7475_id[] = {
 	{ "adt7473", adt7473 },
 	{ "adt7475", adt7475 },
+	{ "adt7490", adt7490 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adt7475_id);
@@ -139,7 +149,7 @@ struct adt7475_data {
 	u8 config4;
 	u8 config5;
 	u8 has_voltage;
-	u16 alarms;
+	u32 alarms;
 	u16 voltage[3][6];
 	u16 temp[7][3];
 	u16 tach[2][4];
@@ -306,10 +316,17 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
 
 	data->voltage[sattr->nr][sattr->index] = volt2reg(sattr->index, val);
 
-	if (sattr->nr == MIN)
-		reg = VOLTAGE_MIN_REG(sattr->index);
-	else
-		reg = VOLTAGE_MAX_REG(sattr->index);
+	if (sattr->index < ADT7475_VOLTAGE_COUNT) {
+		if (sattr->nr == MIN)
+			reg = VOLTAGE_MIN_REG(sattr->index);
+		else
+			reg = VOLTAGE_MAX_REG(sattr->index);
+	} else {
+		if (sattr->nr == MIN)
+			reg = REG_VTT_MIN;
+		else
+			reg = REG_VTT_MAX;
+	}
 
 	i2c_smbus_write_byte_data(client, reg,
 				  data->voltage[sattr->nr][sattr->index] >> 2);
@@ -818,6 +835,12 @@ static ssize_t set_pwm_at_crit(struct device *dev,
 	return count;
 }
 
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
 static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
 static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
 			    set_voltage, MAX, 1);
@@ -830,6 +853,24 @@ static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
 static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
 			    set_voltage, MIN, 2);
 static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_voltage, NULL, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MAX, 3);
+static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MIN, 3);
+static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_voltage, NULL, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_voltage, NULL, INPUT, 4);
+static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MAX, 4);
+static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MIN, 4);
+static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_voltage, NULL, ALARM, 8);
+static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_voltage, NULL, INPUT, 5);
+static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MAX, 5);
+static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MIN, 5);
+static SENSOR_DEVICE_ATTR_2(in5_alarm, S_IRUGO, show_voltage, NULL, ALARM, 31);
 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
@@ -1009,7 +1050,29 @@ static struct attribute *adt7475_attrs[] = {
 	NULL,
 };
 
+/* Attributes specific to the ADT7490 */
+static struct attribute *adt7490_attrs[] = {
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_max.dev_attr.attr,
+	&sensor_dev_attr_in5_min.dev_attr.attr,
+	&sensor_dev_attr_in5_alarm.dev_attr.attr,
+	NULL
+};
+
 static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute_group adt7490_attr_group = { .attrs = adt7490_attrs };
 
 static int adt7475_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
@@ -1032,9 +1095,11 @@ static int adt7475_detect(struct i2c_client *client, int kind,
 		name = "adt7473";
 	else if (devid == 0x75 && client->addr == 0x2e)
 		name = "adt7475";
+	else if ((devid2 & 0xfc) == 0x6c)
+		name = "adt7490";
 	else {
 		dev_dbg(&adapter->dev,
-			"Couldn't detect an ADT7473 or ADT7475 part at "
+			"Couldn't detect an ADT7473/75/90 part at "
 			"0x%02x\n", (unsigned int)client->addr);
 		return -ENODEV;
 	}
@@ -1059,6 +1124,9 @@ static int adt7475_probe(struct i2c_client *client,
 
 	/* Initialize device-specific values */
 	switch (id->driver_data) {
+	case adt7490:
+		data->has_voltage = 0x3f;	/* in0 to in5 */
+		break;
 	default:
 		data->has_voltage = 0x06;	/* in1, in2 */
 	}
@@ -1072,6 +1140,13 @@ static int adt7475_probe(struct i2c_client *client,
 	if (ret)
 		goto efree;
 
+	if (id->driver_data == adt7490) {
+		ret = sysfs_create_group(&client->dev.kobj,
+					 &adt7490_attr_group);
+		if (ret)
+			goto eremove;
+	}
+
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		ret = PTR_ERR(data->hwmon_dev);
@@ -1082,6 +1157,8 @@ static int adt7475_probe(struct i2c_client *client,
 
 eremove:
 	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+	if (data->has_voltage & 0x39)
+		sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
 efree:
 	kfree(data);
 	return ret;
@@ -1093,6 +1170,8 @@ static int adt7475_remove(struct i2c_client *client)
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+	if (data->has_voltage & 0x39)
+		sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
 	kfree(data);
 
 	return 0;
@@ -1177,7 +1256,7 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adt7475_data *data = i2c_get_clientdata(client);
-	u8 ext;
+	u16 ext;
 	int i;
 
 	mutex_lock(&data->lock);
@@ -1188,7 +1267,8 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 		data->alarms = adt7475_read(REG_STATUS2) << 8;
 		data->alarms |= adt7475_read(REG_STATUS1);
 
-		ext = adt7475_read(REG_EXTEND1);
+		ext = (adt7475_read(REG_EXTEND2) << 8) |
+			adt7475_read(REG_EXTEND1);
 		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
 			if (!(data->has_voltage & (1 << i)))
 				continue;
@@ -1197,11 +1277,17 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 				((ext >> (i * 2)) & 3);
 		}
 
-		ext = adt7475_read(REG_EXTEND2);
 		for (i = 0; i < ADT7475_TEMP_COUNT; i++)
 			data->temp[INPUT][i] =
 				(adt7475_read(TEMP_REG(i)) << 2) |
-				((ext >> ((i + 1) * 2)) & 3);
+				((ext >> ((i + 5) * 2)) & 3);
+
+		if (data->has_voltage & (1 << 5)) {
+			data->alarms |= adt7475_read(REG_STATUS4) << 24;
+			ext = adt7475_read(REG_EXTEND3);
+			data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 |
+				((ext >> 4) & 3);
+		}
 
 		for (i = 0; i < ADT7475_TACH_COUNT; i++)
 			data->tach[INPUT][i] =
@@ -1230,6 +1316,11 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 				adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
 		}
 
+		if (data->has_voltage & (1 << 5)) {
+			data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2;
+			data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2;
+		}
+
 		for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
 			/* Adjust values so they match the input precision */
 			data->temp[MIN][i] =
-- 
cgit v1.2.3-18-g5258


From 0f14480b62235ef4fce1cd4755e1cde4c9be5f78 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:06 +0100
Subject: hwmon: (adt7475) Move sysfs files removal to a separate function

Move sysfs files removal to a separate function. The code is common to
the device probing error path and the standard device removal path. As
it will grow with future driver development, this avoids code
duplication.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/adt7475.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index e495665569e..716dae9ff0f 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -1109,6 +1109,14 @@ static int adt7475_detect(struct i2c_client *client, int kind,
 	return 0;
 }
 
+static void adt7475_remove_files(struct i2c_client *client,
+				 struct adt7475_data *data)
+{
+	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+	if (data->has_voltage & 0x39)
+		sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
+}
+
 static int adt7475_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -1156,9 +1164,7 @@ static int adt7475_probe(struct i2c_client *client,
 	return 0;
 
 eremove:
-	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
-	if (data->has_voltage & 0x39)
-		sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
+	adt7475_remove_files(client, data);
 efree:
 	kfree(data);
 	return ret;
@@ -1169,9 +1175,7 @@ static int adt7475_remove(struct i2c_client *client)
 	struct adt7475_data *data = i2c_get_clientdata(client);
 
 	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
-	if (data->has_voltage & 0x39)
-		sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
+	adt7475_remove_files(client, data);
 	kfree(data);
 
 	return 0;
-- 
cgit v1.2.3-18-g5258


From 378933c99402f26587ad80e97bff405265116f9e Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:06 +0100
Subject: hwmon: (adt7475) Handle alternative pin functions

The TACH4 pin can be used for other functions, so fan4 may not always
be available. Likewise, the PWM2 pin can be used for ALERT output, in
which case pwm2 is not available

For the ADT7490, the +2.5 Vin pin may also be used for other
functions, in which case in0 is not available.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/adt7475.c | 114 +++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 99 insertions(+), 15 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 716dae9ff0f..d20130723d6 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -80,6 +80,8 @@
 
 #define REG_EXTEND1		0x76
 #define REG_EXTEND2		0x77
+
+#define REG_CONFIG3		0x78
 #define REG_CONFIG5		0x7C
 #define REG_CONFIG4		0x7D
 
@@ -88,6 +90,10 @@
 #define REG_VTT_MIN		0x84	/* ADT7490 only */
 #define REG_VTT_MAX		0x86	/* ADT7490 only */
 
+#define CONFIG3_SMBALERT	0x01
+#define CONFIG3_THERM		0x02
+
+#define CONFIG4_PINFUNC		0x03
 #define CONFIG4_MAXDUTY		0x08
 
 #define CONFIG5_TWOSCOMP	0x01
@@ -149,6 +155,8 @@ struct adt7475_data {
 	u8 config4;
 	u8 config5;
 	u8 has_voltage;
+	u8 has_pwm2:1;
+	u8 has_fan4:1;
 	u32 alarms;
 	u16 voltage[3][6];
 	u16 temp[7][3];
@@ -1025,21 +1033,12 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_min.dev_attr.attr,
 	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan4_input.dev_attr.attr,
-	&sensor_dev_attr_fan4_min.dev_attr.attr,
-	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
-	&sensor_dev_attr_pwm2.dev_attr.attr,
-	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
-	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm3.dev_attr.attr,
 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
@@ -1050,12 +1049,33 @@ static struct attribute *adt7475_attrs[] = {
 	NULL,
 };
 
+static struct attribute *fan4_attrs[] = {
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+	NULL
+};
+
+static struct attribute *pwm2_attrs[] = {
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	NULL
+};
+
 /* Attributes specific to the ADT7490 */
-static struct attribute *adt7490_attrs[] = {
+static struct attribute *in0_attrs[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in0_max.dev_attr.attr,
 	&sensor_dev_attr_in0_min.dev_attr.attr,
 	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	NULL
+};
+
+static struct attribute *adt7490_attrs[] = {
 	&sensor_dev_attr_in3_input.dev_attr.attr,
 	&sensor_dev_attr_in3_max.dev_attr.attr,
 	&sensor_dev_attr_in3_min.dev_attr.attr,
@@ -1072,6 +1092,9 @@ static struct attribute *adt7490_attrs[] = {
 };
 
 static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
+static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
+static struct attribute_group in0_attr_group = { .attrs = in0_attrs };
 static struct attribute_group adt7490_attr_group = { .attrs = adt7490_attrs };
 
 static int adt7475_detect(struct i2c_client *client, int kind,
@@ -1115,13 +1138,20 @@ static void adt7475_remove_files(struct i2c_client *client,
 	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
 	if (data->has_voltage & 0x39)
 		sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
+	if (data->has_fan4)
+		sysfs_remove_group(&client->dev.kobj, &fan4_attr_group);
+	if (data->has_pwm2)
+		sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group);
+	if (data->has_voltage & (1 << 0))
+		sysfs_remove_group(&client->dev.kobj, &in0_attr_group);
 }
 
 static int adt7475_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct adt7475_data *data;
-	int i, ret = 0;
+	int i, ret = 0, revision;
+	u8 config3;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
@@ -1133,10 +1163,36 @@ static int adt7475_probe(struct i2c_client *client,
 	/* Initialize device-specific values */
 	switch (id->driver_data) {
 	case adt7490:
-		data->has_voltage = 0x3f;	/* in0 to in5 */
+		data->has_voltage = 0x3e;	/* in1 to in5 */
+		revision = adt7475_read(REG_DEVID2) & 0x03;
 		break;
 	default:
 		data->has_voltage = 0x06;	/* in1, in2 */
+		revision = adt7475_read(REG_DEVID2) & 0x07;
+	}
+
+	config3 = adt7475_read(REG_CONFIG3);
+	/* Pin PWM2 may alternatively be used for ALERT output */
+	if (!(config3 & CONFIG3_SMBALERT))
+		data->has_pwm2 = 1;
+	/* Meaning of this bit is inverted for the ADT7473-1 */
+	if (id->driver_data == adt7473 && revision >= 1)
+		data->has_pwm2 = !data->has_pwm2;
+
+	data->config4 = adt7475_read(REG_CONFIG4);
+	/* Pin TACH4 may alternatively be used for THERM */
+	if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
+		data->has_fan4 = 1;
+
+	/* THERM configuration is more complex on the ADT7490, because 2
+	   different pins (TACH4 and +2.5 Vin) can be used for this function */
+	if (id->driver_data == adt7490) {
+		if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
+		    !(config3 & CONFIG3_THERM))
+			data->has_fan4 = 1;
+		if (!(config3 & CONFIG3_THERM) ||
+		    (data->config4 & CONFIG4_PINFUNC) == 0x1)
+			data->has_voltage |= (1 << 0);		/* in0 */
 	}
 
 	/* Call adt7475_read_pwm for all pwm's as this will reprogram any
@@ -1155,6 +1211,23 @@ static int adt7475_probe(struct i2c_client *client,
 			goto eremove;
 	}
 
+	/* Features that can be disabled individually */
+	if (data->has_fan4) {
+		ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group);
+		if (ret)
+			goto eremove;
+	}
+	if (data->has_pwm2) {
+		ret = sysfs_create_group(&client->dev.kobj, &pwm2_attr_group);
+		if (ret)
+			goto eremove;
+	}
+	if (data->has_voltage & (1 << 0)) {
+		ret = sysfs_create_group(&client->dev.kobj, &in0_attr_group);
+		if (ret)
+			goto eremove;
+	}
+
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		ret = PTR_ERR(data->hwmon_dev);
@@ -1293,13 +1366,19 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 				((ext >> 4) & 3);
 		}
 
-		for (i = 0; i < ADT7475_TACH_COUNT; i++)
+		for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+			if (i == 3 && !data->has_fan4)
+				continue;
 			data->tach[INPUT][i] =
 				adt7475_read_word(client, TACH_REG(i));
+		}
 
 		/* Updated by hw when in auto mode */
-		for (i = 0; i < ADT7475_PWM_COUNT; i++)
+		for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+			if (i == 1 && !data->has_pwm2)
+				continue;
 			data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+		}
 
 		data->measure_updated = jiffies;
 	}
@@ -1340,11 +1419,16 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 		}
 		adt7475_read_hystersis(client);
 
-		for (i = 0; i < ADT7475_TACH_COUNT; i++)
+		for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+			if (i == 3 && !data->has_fan4)
+				continue;
 			data->tach[MIN][i] =
 				adt7475_read_word(client, TACH_MIN_REG(i));
+		}
 
 		for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+			if (i == 1 && !data->has_pwm2)
+				continue;
 			data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
 			data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
 			/* Set the channel and control information */
-- 
cgit v1.2.3-18-g5258


From d07ca4ad2f67ebb1bf48a2308a7a0cd81ef8f70a Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:07 +0100
Subject: hwmon: (adt7475) Print device information on probe

Print the device name and revision at probe time, as well as a list of
all optional features which are available.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/adt7475.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index d20130723d6..688b0a1af5a 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -40,6 +40,8 @@
 
 /* 7475 Common Registers */
 
+#define REG_DEVREV2		0x12	/* ADT7490 only */
+
 #define REG_VTT			0x1E	/* ADT7490 only */
 #define REG_EXTEND3		0x1F	/* ADT7490 only */
 
@@ -1149,6 +1151,12 @@ static void adt7475_remove_files(struct i2c_client *client,
 static int adt7475_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	static const char *names[] = {
+		[adt7473] = "ADT7473",
+		[adt7475] = "ADT7475",
+		[adt7490] = "ADT7490",
+	};
+
 	struct adt7475_data *data;
 	int i, ret = 0, revision;
 	u8 config3;
@@ -1165,6 +1173,8 @@ static int adt7475_probe(struct i2c_client *client,
 	case adt7490:
 		data->has_voltage = 0x3e;	/* in1 to in5 */
 		revision = adt7475_read(REG_DEVID2) & 0x03;
+		if (revision == 0x03)
+			revision += adt7475_read(REG_DEVREV2);
 		break;
 	default:
 		data->has_voltage = 0x06;	/* in1, in2 */
@@ -1234,6 +1244,14 @@ static int adt7475_probe(struct i2c_client *client,
 		goto eremove;
 	}
 
+	dev_info(&client->dev, "%s device, revision %d\n",
+		 names[id->driver_data], revision);
+	if ((data->has_voltage & (1 << 0)) || data->has_fan4 || data->has_pwm2)
+		dev_info(&client->dev, "Optional features:%s%s%s\n",
+			 (data->has_voltage & (1 << 0)) ? " in0" : "",
+			 data->has_fan4 ? " fan4" : "",
+			 data->has_pwm2 ? " pwm2" : "");
+
 	return 0;
 
 eremove:
-- 
cgit v1.2.3-18-g5258


From ebfaf1fbb6010204e973e329034d0004d6521503 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:07 +0100
Subject: hwmon: (adt7475) Voltage attenuators can be bypassed

It is possible to bypass the voltage attenuators on the +2.5V, Vccp,
+5V and +12V voltage monitoring inputs. This is useful to connect
other voltage channels than the ones the monitoring chip was
originally designed for. When this feature is enabled, we must not
include the scaling factors in our computations.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/adt7475.c | 42 ++++++++++++++++++++++++++++++++++++------
 1 file changed, 36 insertions(+), 6 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 688b0a1af5a..eac24c1361b 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -80,6 +80,8 @@
 
 #define REG_TEMP_OFFSET_BASE	0x70
 
+#define REG_CONFIG2		0x73
+
 #define REG_EXTEND1		0x76
 #define REG_EXTEND2		0x77
 
@@ -92,11 +94,15 @@
 #define REG_VTT_MIN		0x84	/* ADT7490 only */
 #define REG_VTT_MAX		0x86	/* ADT7490 only */
 
+#define CONFIG2_ATTN		0x20
+
 #define CONFIG3_SMBALERT	0x01
 #define CONFIG3_THERM		0x02
 
 #define CONFIG4_PINFUNC		0x03
 #define CONFIG4_MAXDUTY		0x08
+#define CONFIG4_ATTN_IN10	0x30
+#define CONFIG4_ATTN_IN43	0xC0
 
 #define CONFIG5_TWOSCOMP	0x01
 #define CONFIG5_TEMPOFFSET	0x02
@@ -157,6 +163,7 @@ struct adt7475_data {
 	u8 config4;
 	u8 config5;
 	u8 has_voltage;
+	u8 bypass_attn;		/* Bypass voltage attenuator */
 	u8 has_pwm2:1;
 	u8 has_fan4:1;
 	u32 alarms;
@@ -233,19 +240,24 @@ static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = {
 	{ 45, 45 },	/* Vtt */
 };
 
-static inline int reg2volt(int channel, u16 reg)
+static inline int reg2volt(int channel, u16 reg, u8 bypass_attn)
 {
 	const int *r = adt7473_in_scaling[channel];
 
+	if (bypass_attn & (1 << channel))
+		return DIV_ROUND_CLOSEST(reg * 2250, 1024);
 	return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024);
 }
 
-static inline u16 volt2reg(int channel, long volt)
+static inline u16 volt2reg(int channel, long volt, u8 bypass_attn)
 {
 	const int *r = adt7473_in_scaling[channel];
 	long reg;
 
-	reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
+	if (bypass_attn & (1 << channel))
+		reg = (volt * 1024) / 2250;
+	else
+		reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
 	return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2);
 }
 
@@ -305,7 +317,8 @@ static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
 			       (data->alarms >> sattr->index) & 1);
 	default:
 		val = data->voltage[sattr->nr][sattr->index];
-		return sprintf(buf, "%d\n", reg2volt(sattr->index, val));
+		return sprintf(buf, "%d\n",
+			       reg2volt(sattr->index, val, data->bypass_attn));
 	}
 }
 
@@ -324,7 +337,8 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
 
 	mutex_lock(&data->lock);
 
-	data->voltage[sattr->nr][sattr->index] = volt2reg(sattr->index, val);
+	data->voltage[sattr->nr][sattr->index] =
+				volt2reg(sattr->index, val, data->bypass_attn);
 
 	if (sattr->index < ADT7475_VOLTAGE_COUNT) {
 		if (sattr->nr == MIN)
@@ -1159,7 +1173,7 @@ static int adt7475_probe(struct i2c_client *client,
 
 	struct adt7475_data *data;
 	int i, ret = 0, revision;
-	u8 config3;
+	u8 config2, config3;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
@@ -1205,6 +1219,16 @@ static int adt7475_probe(struct i2c_client *client,
 			data->has_voltage |= (1 << 0);		/* in0 */
 	}
 
+	/* Voltage attenuators can be bypassed, globally or individually */
+	config2 = adt7475_read(REG_CONFIG2);
+	if (config2 & CONFIG2_ATTN) {
+		data->bypass_attn = (0x3 << 3) | 0x3;
+	} else {
+		data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
+				    ((data->config4 & CONFIG4_ATTN_IN43) >> 3);
+	}
+	data->bypass_attn &= data->has_voltage;
+
 	/* Call adt7475_read_pwm for all pwm's as this will reprogram any
 	   pwm's which are disabled to manual mode with 0% duty cycle */
 	for (i = 0; i < ADT7475_PWM_COUNT; i++)
@@ -1251,6 +1275,12 @@ static int adt7475_probe(struct i2c_client *client,
 			 (data->has_voltage & (1 << 0)) ? " in0" : "",
 			 data->has_fan4 ? " fan4" : "",
 			 data->has_pwm2 ? " pwm2" : "");
+	if (data->bypass_attn)
+		dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n",
+			 (data->bypass_attn & (1 << 0)) ? " in0" : "",
+			 (data->bypass_attn & (1 << 1)) ? " in1" : "",
+			 (data->bypass_attn & (1 << 3)) ? " in3" : "",
+			 (data->bypass_attn & (1 << 4)) ? " in4" : "");
 
 	return 0;
 
-- 
cgit v1.2.3-18-g5258


From d8d2ee073274ab666282d1942d08f1bb454d715b Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:08 +0100
Subject: hwmon: (adt7475) Add support for the ADT7476

Add support for the Analog Devices ADT7476 chip. This chip is largely
compatible with the ADT7473 and ADT7475, with additional features.
In particular, it has 5 voltage inputs instead of 2, and VID input
pins.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/Kconfig   |  5 ++--
 drivers/hwmon/adt7475.c | 80 ++++++++++++++++++++++++++++++++++++++-----------
 2 files changed, 65 insertions(+), 20 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f9f4365349b..957171c6232 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -205,11 +205,12 @@ config SENSORS_ADT7473
 	  will be called adt7473.
 
 config SENSORS_ADT7475
-	tristate "Analog Devices ADT7473, ADT7475 and ADT7490"
+	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 	depends on I2C && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the Analog Devices
-	  ADT7473, ADT7475 and ADT7490 hardware monitoring chips.
+	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
+	  chips.
 
 	  This driver can also be build as a module.  If so, the module
 	  will be called adt7475.
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index eac24c1361b..72c3b754e7b 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -58,6 +58,8 @@
 #define REG_STATUS1		0x41
 #define REG_STATUS2		0x42
 
+#define REG_VID			0x43	/* ADT7476 only */
+
 #define REG_VOLTAGE_MIN_BASE	0x44
 #define REG_VOLTAGE_MAX_BASE	0x45
 
@@ -94,6 +96,8 @@
 #define REG_VTT_MIN		0x84	/* ADT7490 only */
 #define REG_VTT_MAX		0x86	/* ADT7490 only */
 
+#define VID_VIDSEL		0x80	/* ADT7476 only */
+
 #define CONFIG2_ATTN		0x20
 
 #define CONFIG3_SMBALERT	0x01
@@ -142,11 +146,12 @@
 
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
-I2C_CLIENT_INSMOD_3(adt7473, adt7475, adt7490);
+I2C_CLIENT_INSMOD_4(adt7473, adt7475, adt7476, adt7490);
 
 static const struct i2c_device_id adt7475_id[] = {
 	{ "adt7473", adt7473 },
 	{ "adt7475", adt7475 },
+	{ "adt7476", adt7476 },
 	{ "adt7490", adt7490 },
 	{ }
 };
@@ -1082,7 +1087,6 @@ static struct attribute *pwm2_attrs[] = {
 	NULL
 };
 
-/* Attributes specific to the ADT7490 */
 static struct attribute *in0_attrs[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in0_max.dev_attr.attr,
@@ -1091,15 +1095,23 @@ static struct attribute *in0_attrs[] = {
 	NULL
 };
 
-static struct attribute *adt7490_attrs[] = {
+static struct attribute *in3_attrs[] = {
 	&sensor_dev_attr_in3_input.dev_attr.attr,
 	&sensor_dev_attr_in3_max.dev_attr.attr,
 	&sensor_dev_attr_in3_min.dev_attr.attr,
 	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+	NULL
+};
+
+static struct attribute *in4_attrs[] = {
 	&sensor_dev_attr_in4_input.dev_attr.attr,
 	&sensor_dev_attr_in4_max.dev_attr.attr,
 	&sensor_dev_attr_in4_min.dev_attr.attr,
 	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+	NULL
+};
+
+static struct attribute *in5_attrs[] = {
 	&sensor_dev_attr_in5_input.dev_attr.attr,
 	&sensor_dev_attr_in5_max.dev_attr.attr,
 	&sensor_dev_attr_in5_min.dev_attr.attr,
@@ -1111,7 +1123,9 @@ static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
 static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
 static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
 static struct attribute_group in0_attr_group = { .attrs = in0_attrs };
-static struct attribute_group adt7490_attr_group = { .attrs = adt7490_attrs };
+static struct attribute_group in3_attr_group = { .attrs = in3_attrs };
+static struct attribute_group in4_attr_group = { .attrs = in4_attrs };
+static struct attribute_group in5_attr_group = { .attrs = in5_attrs };
 
 static int adt7475_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
@@ -1134,11 +1148,13 @@ static int adt7475_detect(struct i2c_client *client, int kind,
 		name = "adt7473";
 	else if (devid == 0x75 && client->addr == 0x2e)
 		name = "adt7475";
+	else if (devid == 0x76)
+		name = "adt7476";
 	else if ((devid2 & 0xfc) == 0x6c)
 		name = "adt7490";
 	else {
 		dev_dbg(&adapter->dev,
-			"Couldn't detect an ADT7473/75/90 part at "
+			"Couldn't detect an ADT7473/75/76/90 part at "
 			"0x%02x\n", (unsigned int)client->addr);
 		return -ENODEV;
 	}
@@ -1152,14 +1168,18 @@ static void adt7475_remove_files(struct i2c_client *client,
 				 struct adt7475_data *data)
 {
 	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
-	if (data->has_voltage & 0x39)
-		sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
 	if (data->has_fan4)
 		sysfs_remove_group(&client->dev.kobj, &fan4_attr_group);
 	if (data->has_pwm2)
 		sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group);
 	if (data->has_voltage & (1 << 0))
 		sysfs_remove_group(&client->dev.kobj, &in0_attr_group);
+	if (data->has_voltage & (1 << 3))
+		sysfs_remove_group(&client->dev.kobj, &in3_attr_group);
+	if (data->has_voltage & (1 << 4))
+		sysfs_remove_group(&client->dev.kobj, &in4_attr_group);
+	if (data->has_voltage & (1 << 5))
+		sysfs_remove_group(&client->dev.kobj, &in5_attr_group);
 }
 
 static int adt7475_probe(struct i2c_client *client,
@@ -1168,6 +1188,7 @@ static int adt7475_probe(struct i2c_client *client,
 	static const char *names[] = {
 		[adt7473] = "ADT7473",
 		[adt7475] = "ADT7475",
+		[adt7476] = "ADT7476",
 		[adt7490] = "ADT7490",
 	};
 
@@ -1184,6 +1205,10 @@ static int adt7475_probe(struct i2c_client *client,
 
 	/* Initialize device-specific values */
 	switch (id->driver_data) {
+	case adt7476:
+		data->has_voltage = 0x0e;	/* in1 to in3 */
+		revision = adt7475_read(REG_DEVID2) & 0x07;
+		break;
 	case adt7490:
 		data->has_voltage = 0x3e;	/* in1 to in5 */
 		revision = adt7475_read(REG_DEVID2) & 0x03;
@@ -1208,17 +1233,27 @@ static int adt7475_probe(struct i2c_client *client,
 	if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
 		data->has_fan4 = 1;
 
-	/* THERM configuration is more complex on the ADT7490, because 2
-	   different pins (TACH4 and +2.5 Vin) can be used for this function */
+	/* THERM configuration is more complex on the ADT7476 and ADT7490,
+	   because 2 different pins (TACH4 and +2.5 Vin) can be used for
+	   this function */
 	if (id->driver_data == adt7490) {
 		if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
 		    !(config3 & CONFIG3_THERM))
 			data->has_fan4 = 1;
+	}
+	if (id->driver_data == adt7476 || id->driver_data == adt7490) {
 		if (!(config3 & CONFIG3_THERM) ||
 		    (data->config4 & CONFIG4_PINFUNC) == 0x1)
 			data->has_voltage |= (1 << 0);		/* in0 */
 	}
 
+	/* On the ADT7476, the +12V input pin may instead be used as VID5 */
+	if (id->driver_data == adt7476) {
+		u8 vid = adt7475_read(REG_VID);
+		if (!(vid & VID_VIDSEL))
+			data->has_voltage |= (1 << 4);		/* in4 */
+	}
+
 	/* Voltage attenuators can be bypassed, globally or individually */
 	config2 = adt7475_read(REG_CONFIG2);
 	if (config2 & CONFIG2_ATTN) {
@@ -1238,13 +1273,6 @@ static int adt7475_probe(struct i2c_client *client,
 	if (ret)
 		goto efree;
 
-	if (id->driver_data == adt7490) {
-		ret = sysfs_create_group(&client->dev.kobj,
-					 &adt7490_attr_group);
-		if (ret)
-			goto eremove;
-	}
-
 	/* Features that can be disabled individually */
 	if (data->has_fan4) {
 		ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group);
@@ -1261,6 +1289,21 @@ static int adt7475_probe(struct i2c_client *client,
 		if (ret)
 			goto eremove;
 	}
+	if (data->has_voltage & (1 << 3)) {
+		ret = sysfs_create_group(&client->dev.kobj, &in3_attr_group);
+		if (ret)
+			goto eremove;
+	}
+	if (data->has_voltage & (1 << 4)) {
+		ret = sysfs_create_group(&client->dev.kobj, &in4_attr_group);
+		if (ret)
+			goto eremove;
+	}
+	if (data->has_voltage & (1 << 5)) {
+		ret = sysfs_create_group(&client->dev.kobj, &in5_attr_group);
+		if (ret)
+			goto eremove;
+	}
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -1270,9 +1313,10 @@ static int adt7475_probe(struct i2c_client *client,
 
 	dev_info(&client->dev, "%s device, revision %d\n",
 		 names[id->driver_data], revision);
-	if ((data->has_voltage & (1 << 0)) || data->has_fan4 || data->has_pwm2)
-		dev_info(&client->dev, "Optional features:%s%s%s\n",
+	if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2)
+		dev_info(&client->dev, "Optional features:%s%s%s%s\n",
 			 (data->has_voltage & (1 << 0)) ? " in0" : "",
+			 (data->has_voltage & (1 << 4)) ? " in4" : "",
 			 data->has_fan4 ? " fan4" : "",
 			 data->has_pwm2 ? " pwm2" : "");
 	if (data->bypass_attn)
-- 
cgit v1.2.3-18-g5258


From 54fe4671aa5853ca88da72d67e969a3d8de6dcf6 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 9 Dec 2009 20:36:08 +0100
Subject: hwmon: (adt7475) Add VID support for the ADT7476

The ADT7476 has 5 dedicated pins for VID input, and the +12V input can
optionally be used as a 6th VID pin. Add support for VID input.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
---
 drivers/hwmon/Kconfig   |  1 +
 drivers/hwmon/adt7475.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 64 insertions(+), 3 deletions(-)

(limited to 'drivers/hwmon')

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 957171c6232..9e640c62ebd 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -207,6 +207,7 @@ config SENSORS_ADT7473
 config SENSORS_ADT7475
 	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 	depends on I2C && EXPERIMENTAL
+	select HWMON_VID
 	help
 	  If you say yes here you get support for the Analog Devices
 	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 72c3b754e7b..99abfddedbc 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Indexes for the sysfs hooks */
@@ -110,6 +111,7 @@
 
 #define CONFIG5_TWOSCOMP	0x01
 #define CONFIG5_TEMPOFFSET	0x02
+#define CONFIG5_VIDGPIO		0x10	/* ADT7476 only */
 
 /* ADT7475 Settings */
 
@@ -171,6 +173,7 @@ struct adt7475_data {
 	u8 bypass_attn;		/* Bypass voltage attenuator */
 	u8 has_pwm2:1;
 	u8 has_fan4:1;
+	u8 has_vid:1;
 	u32 alarms;
 	u16 voltage[3][6];
 	u16 temp[7][3];
@@ -179,6 +182,9 @@ struct adt7475_data {
 	u8 range[3];
 	u8 pwmctl[3];
 	u8 pwmchan[3];
+
+	u8 vid;
+	u8 vrm;
 };
 
 static struct i2c_driver adt7475_driver;
@@ -864,6 +870,35 @@ static ssize_t set_pwm_at_crit(struct device *dev,
 	return count;
 }
 
+static ssize_t show_vrm(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct adt7475_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", (int)data->vrm);
+}
+
+static ssize_t set_vrm(struct device *dev, struct device_attribute *devattr,
+		       const char *buf, size_t count)
+{
+	struct adt7475_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+	if (val < 0 || val > 255)
+		return -EINVAL;
+	data->vrm = val;
+
+	return count;
+}
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
 static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage,
 			    set_voltage, MAX, 0);
@@ -1007,6 +1042,9 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
 static DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
 		   show_pwm_at_crit, set_pwm_at_crit);
 
+static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, set_vrm);
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
 static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_max.dev_attr.attr,
@@ -1119,6 +1157,12 @@ static struct attribute *in5_attrs[] = {
 	NULL
 };
 
+static struct attribute *vid_attrs[] = {
+	&dev_attr_cpu0_vid.attr,
+	&dev_attr_vrm.attr,
+	NULL
+};
+
 static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
 static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
 static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
@@ -1126,6 +1170,7 @@ static struct attribute_group in0_attr_group = { .attrs = in0_attrs };
 static struct attribute_group in3_attr_group = { .attrs = in3_attrs };
 static struct attribute_group in4_attr_group = { .attrs = in4_attrs };
 static struct attribute_group in5_attr_group = { .attrs = in5_attrs };
+static struct attribute_group vid_attr_group = { .attrs = vid_attrs };
 
 static int adt7475_detect(struct i2c_client *client, int kind,
 			  struct i2c_board_info *info)
@@ -1180,6 +1225,8 @@ static void adt7475_remove_files(struct i2c_client *client,
 		sysfs_remove_group(&client->dev.kobj, &in4_attr_group);
 	if (data->has_voltage & (1 << 5))
 		sysfs_remove_group(&client->dev.kobj, &in5_attr_group);
+	if (data->has_vid)
+		sysfs_remove_group(&client->dev.kobj, &vid_attr_group);
 }
 
 static int adt7475_probe(struct i2c_client *client,
@@ -1247,11 +1294,14 @@ static int adt7475_probe(struct i2c_client *client,
 			data->has_voltage |= (1 << 0);		/* in0 */
 	}
 
-	/* On the ADT7476, the +12V input pin may instead be used as VID5 */
+	/* On the ADT7476, the +12V input pin may instead be used as VID5,
+	   and VID pins may alternatively be used as GPIO */
 	if (id->driver_data == adt7476) {
 		u8 vid = adt7475_read(REG_VID);
 		if (!(vid & VID_VIDSEL))
 			data->has_voltage |= (1 << 4);		/* in4 */
+
+		data->has_vid = !(adt7475_read(REG_CONFIG5) & CONFIG5_VIDGPIO);
 	}
 
 	/* Voltage attenuators can be bypassed, globally or individually */
@@ -1304,6 +1354,12 @@ static int adt7475_probe(struct i2c_client *client,
 		if (ret)
 			goto eremove;
 	}
+	if (data->has_vid) {
+		data->vrm = vid_which_vrm();
+		ret = sysfs_create_group(&client->dev.kobj, &vid_attr_group);
+		if (ret)
+			goto eremove;
+	}
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -1314,11 +1370,12 @@ static int adt7475_probe(struct i2c_client *client,
 	dev_info(&client->dev, "%s device, revision %d\n",
 		 names[id->driver_data], revision);
 	if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2)
-		dev_info(&client->dev, "Optional features:%s%s%s%s\n",
+		dev_info(&client->dev, "Optional features:%s%s%s%s%s\n",
 			 (data->has_voltage & (1 << 0)) ? " in0" : "",
 			 (data->has_voltage & (1 << 4)) ? " in4" : "",
 			 data->has_fan4 ? " fan4" : "",
-			 data->has_pwm2 ? " pwm2" : "");
+			 data->has_pwm2 ? " pwm2" : "",
+			 data->has_vid ? " vid" : "");
 	if (data->bypass_attn)
 		dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n",
 			 (data->bypass_attn & (1 << 0)) ? " in0" : "",
@@ -1472,6 +1529,9 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 			data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
 		}
 
+		if (data->has_vid)
+			data->vid = adt7475_read(REG_VID) & 0x3f;
+
 		data->measure_updated = jiffies;
 	}
 
-- 
cgit v1.2.3-18-g5258