From 4ed1077953f531b3fef4af4b4ade48a828c48869 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Oct 2008 17:51:16 +0200 Subject: hwmon: (it87) Fix thermal sensor type values The it87 driver doesn't follow the standard sensor type values as documented in Documentation/hwmon/sysfs-interface. It uses value 2 for thermistors instead of value 4. This causes "sensors" to tell the user that the chip is setup for a transistor while it is actually setup for a thermistor. Using value 4 for thermistors solves the problem. For compatibility reasons, we still accept value 2 but emit a warning message so that users update their configuration files. Signed-off-by: Jean Delvare Acked-by: Hans de Goede --- drivers/hwmon/it87.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/hwmon/it87.c') diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index d793cc01199..b74c95735f9 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -477,7 +477,7 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, if (reg & (1 << nr)) return sprintf(buf, "3\n"); /* thermal diode */ if (reg & (8 << nr)) - return sprintf(buf, "2\n"); /* thermistor */ + return sprintf(buf, "4\n"); /* thermistor */ return sprintf(buf, "0\n"); /* disabled */ } static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, @@ -493,10 +493,15 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, data->sensor &= ~(1 << nr); data->sensor &= ~(8 << nr); - /* 3 = thermal diode; 2 = thermistor; 0 = disabled */ + if (val == 2) { /* backwards compatibility */ + dev_warn(dev, "Sensor type 2 is deprecated, please use 4 " + "instead\n"); + val = 4; + } + /* 3 = thermal diode; 4 = thermistor; 0 = disabled */ if (val == 3) data->sensor |= 1 << nr; - else if (val == 2) + else if (val == 4) data->sensor |= 8 << nr; else if (val != 0) { mutex_unlock(&data->update_lock); -- cgit v1.2.3-18-g5258