From 9934c132989d5c488d2e15188220ce240960ce96 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 22 Jul 2010 13:18:19 -0700 Subject: drm/i915: make sure eDP panel is turned on When enabling the eDP port, we need to make sure the panel is turned on after training the link. If we don't, it likely won't come back after suspend or may not come up at all. For unknown reasons, unlocking the panel regs before initiating a power on sequence is necessary. There are known bugs in the PCH panel sequencing logic, apparently this is one possible workaround. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739. Signed-off-by: Jesse Barnes Tested-by: "Paulo J. S. Silva" Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_dp.c | 53 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1aac59e83bf..5d426611531 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -717,6 +717,51 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } } +static void ironlake_edp_panel_on (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long timeout = jiffies + msecs_to_jiffies(5000); + u32 pp, pp_status; + + pp_status = I915_READ(PCH_PP_STATUS); + if (pp_status & PP_ON) + return; + + pp = I915_READ(PCH_PP_CONTROL); + pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON; + I915_WRITE(PCH_PP_CONTROL, pp); + do { + pp_status = I915_READ(PCH_PP_STATUS); + } while (((pp_status & PP_ON) == 0) && !time_after(jiffies, timeout)); + + if (time_after(jiffies, timeout)) + DRM_DEBUG_KMS("panel on wait timed out: 0x%08x\n", pp_status); + + pp &= ~(PANEL_UNLOCK_REGS | EDP_FORCE_VDD); + I915_WRITE(PCH_PP_CONTROL, pp); +} + +static void ironlake_edp_panel_off (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long timeout = jiffies + msecs_to_jiffies(5000); + u32 pp, pp_status; + + pp = I915_READ(PCH_PP_CONTROL); + pp &= ~POWER_TARGET_ON; + I915_WRITE(PCH_PP_CONTROL, pp); + do { + pp_status = I915_READ(PCH_PP_STATUS); + } while ((pp_status & PP_ON) && !time_after(jiffies, timeout)); + + if (time_after(jiffies, timeout)) + DRM_DEBUG_KMS("panel off wait timed out\n"); + + /* Make sure VDD is enabled so DP AUX will work */ + pp |= EDP_FORCE_VDD; + I915_WRITE(PCH_PP_CONTROL, pp); +} + static void ironlake_edp_backlight_on (struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -751,14 +796,18 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (mode != DRM_MODE_DPMS_ON) { if (dp_reg & DP_PORT_EN) { intel_dp_link_down(intel_encoder, dp_priv->DP); - if (IS_eDP(intel_encoder)) + if (IS_eDP(intel_encoder)) { ironlake_edp_backlight_off(dev); + ironlake_edp_backlight_off(dev); + } } } else { if (!(dp_reg & DP_PORT_EN)) { intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration); - if (IS_eDP(intel_encoder)) + if (IS_eDP(intel_encoder)) { + ironlake_edp_panel_on(dev); ironlake_edp_backlight_on(dev); + } } } dp_priv->dpms_mode = mode; -- cgit v1.2.3-18-g5258