From 16ea975eac671fa40a78594a116a44fef8e3f4a9 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 8 Jan 2013 15:04:28 -0600 Subject: drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark Reviewed-by: Daniel Vetter Tested-by: Koen Kooi --- drivers/gpu/drm/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm/Makefile') diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 6f58c81cfcb..3af934dffe6 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -50,4 +50,5 @@ obj-$(CONFIG_DRM_UDL) += udl/ obj-$(CONFIG_DRM_AST) += ast/ obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/ obj-$(CONFIG_DRM_TEGRA) += tegra/ +obj-$(CONFIG_DRM_TILCDC) += tilcdc/ obj-y += i2c/ -- cgit v1.2.3-18-g5258