From 4fc06b3171f4de92cd21bf7ab1cb0bf62f05769d Mon Sep 17 00:00:00 2001 From: Aravind Gopalakrishnan Date: Sat, 24 Aug 2013 10:47:48 -0500 Subject: amd64_edac: Fix incorrect wraparounds dct_base and dct_limit obtain 32 bit register values when they read their respective pci config space registers. A left shift beyond 32 bits will cause them to wrap around. Similar case for chan_addr as can be seen from the bug report (link below). In the patch, we rectify this by casting chan_addr to u64 and by comparing dct_base and dct_limit against properly shifted sys_addr in order to compare the correct bits. Reported-by: Dan Carpenter Signed-off-by: Aravind Gopalakrishnan Link: http://lkml.kernel.org/r/20130819132302.GA12171@elgon.mountain Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/edac') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 6952d432e62..3c9e4e98c65 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1558,11 +1558,12 @@ static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range, } /* Verify sys_addr is within DCT Range. */ - dct_base = (dct_sel_baseaddr(pvt) << 27); - dct_limit = (((dct_cont_limit_reg >> 11) & 0x1FFF) << 27) | 0x7FFFFFF; + dct_base = (u64) dct_sel_baseaddr(pvt); + dct_limit = (dct_cont_limit_reg >> 11) & 0x1FFF; if (!(dct_cont_base_reg & BIT(0)) && - !(dct_base <= sys_addr && dct_limit >= sys_addr)) + !(dct_base <= (sys_addr >> 27) && + dct_limit >= (sys_addr >> 27))) return -EINVAL; /* Verify number of dct's that participate in channel interleaving. */ @@ -1584,7 +1585,7 @@ static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range, if (leg_mmio_hole && (sys_addr >= BIT_64(32))) chan_offset = dhar_offset; else - chan_offset = dct_base; + chan_offset = dct_base << 27; chan_addr = sys_addr - chan_offset; @@ -1614,7 +1615,7 @@ static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range, amd64_read_pci_cfg(pvt->F1, DRAM_CONT_HIGH_OFF + (int) channel * 4, &tmp); - chan_addr += ((tmp >> 11) & 0xfff) << 27; + chan_addr += (u64) ((tmp >> 11) & 0xfff) << 27; } f15h_select_dct(pvt, channel); -- cgit v1.2.3-18-g5258