From 15ed103a98008d85f20956e0e29c2cae78051efe Mon Sep 17 00:00:00 2001 From: David Mackey Date: Tue, 17 Apr 2012 11:30:52 -0700 Subject: edac: Fix spelling errors. Signed-off-by: David Mackey Signed-off-by: Vinson Lee Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- drivers/edac/i7core_edac.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/edac/i7core_edac.c') diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 85226ccf529..7f1dfcc4e59 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -90,7 +90,7 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices"); #define MC_MAX_DOD 0x64 /* - * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet: + * OFFSETS for Device 3 Function 4, as indicated on Xeon 5500 datasheet: * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf */ @@ -101,7 +101,7 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices"); #define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff) #define DIMM0_COR_ERR(r) ((r) & 0x7fff) -/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */ +/* OFFSETS for Device 3 Function 2, as indicated on Xeon 5500 datasheet */ #define MC_SSRCONTROL 0x48 #define SSR_MODE_DISABLE 0x00 #define SSR_MODE_ENABLE 0x01 @@ -398,7 +398,7 @@ static DEFINE_PCI_DEVICE_TABLE(i7core_pci_tbl) = { }; /**************************************************************************** - Anciliary status routines + Ancillary status routines ****************************************************************************/ /* MC_CONTROL bits */ @@ -1361,7 +1361,7 @@ static int i7core_get_onedevice(struct pci_dev **prev, dev_descr->dev_id, *prev); /* - * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs + * On Xeon 55xx, the Intel QuickPath Arch Generic Non-core regs * is at addr 8086:2c40, instead of 8086:2c41. So, we need * to probe for the alternate address in case of failure */ @@ -2132,7 +2132,7 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw) /* * get_sdram_scrub_rate This routine convert current scrub rate value - * into byte/sec bandwidth accourding to + * into byte/sec bandwidth according to * SCRUBINTERVAL formula found in datasheet. */ static int get_sdram_scrub_rate(struct mem_ctl_info *mci) -- cgit v1.2.3-18-g5258