From b9b5ab11ea221a9f2d5af41da639e0898675c34c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 13 Sep 2013 21:45:51 +0200 Subject: clk: nomadik: set all timers to use 2.4 MHz TIMCLK This fixes a regression for the Nomadik on the main system timers. The Nomadik seemed a bit slow and its heartbeat wasn't looking healthy. And it was not strange, because it has been connected to the 32768 Hz clock at boot, while being told by the clock driver that it was 2.4MHz. Actually connect the TIMCLK to 2.4MHz by default as this is what we want for nice scheduling, clocksource and clock event. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/clk-nomadik.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 51410c2ac2c..4d978a3c88f 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -27,6 +27,14 @@ */ #define SRC_CR 0x00U +#define SRC_CR_T0_ENSEL BIT(15) +#define SRC_CR_T1_ENSEL BIT(17) +#define SRC_CR_T2_ENSEL BIT(19) +#define SRC_CR_T3_ENSEL BIT(21) +#define SRC_CR_T4_ENSEL BIT(23) +#define SRC_CR_T5_ENSEL BIT(25) +#define SRC_CR_T6_ENSEL BIT(27) +#define SRC_CR_T7_ENSEL BIT(29) #define SRC_XTALCR 0x0CU #define SRC_XTALCR_XTALTIMEN BIT(20) #define SRC_XTALCR_SXTALDIS BIT(19) @@ -543,6 +551,19 @@ void __init nomadik_clk_init(void) __func__, np->name); return; } + + /* Set all timers to use the 2.4 MHz TIMCLK */ + val = readl(src_base + SRC_CR); + val |= SRC_CR_T0_ENSEL; + val |= SRC_CR_T1_ENSEL; + val |= SRC_CR_T2_ENSEL; + val |= SRC_CR_T3_ENSEL; + val |= SRC_CR_T4_ENSEL; + val |= SRC_CR_T5_ENSEL; + val |= SRC_CR_T6_ENSEL; + val |= SRC_CR_T7_ENSEL; + writel(val, src_base + SRC_CR); + val = readl(src_base + SRC_XTALCR); pr_info("SXTALO is %s\n", (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); -- cgit v1.2.3-18-g5258