From 1a66fdf083bf2b60c4d12feb970bc7373b59e33a Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Tue, 27 Jun 2006 02:54:20 -0700 Subject: [PATCH] chardev: GPIO for SCx200 & PC-8736x: migrate file-ops to common module Now that the read(), write() file-ops are dispatching gpio-ops via the vtable, they are generic, and can be moved 'verbatim' to the nsc_gpio common-support module. After the move, various symbols are renamed to update 'scx200_' to 'nsc_', and headers are adjusted accordingly. Signed-off-by: Jim Cromie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/scx200_gpio.c | 88 +++++----------------------------------------- 1 file changed, 8 insertions(+), 80 deletions(-) (limited to 'drivers/char/scx200_gpio.c') diff --git a/drivers/char/scx200_gpio.c b/drivers/char/scx200_gpio.c index 15dfb95ebc7..eb9a8477759 100644 --- a/drivers/char/scx200_gpio.c +++ b/drivers/char/scx200_gpio.c @@ -37,6 +37,12 @@ MODULE_PARM_DESC(major, "Major device number"); extern void scx200_gpio_dump(unsigned index); +extern ssize_t nsc_gpio_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos); + +extern ssize_t nsc_gpio_read(struct file *file, char __user *buf, + size_t len, loff_t *ppos); + struct nsc_gpio_ops scx200_access = { .owner = THIS_MODULE, .gpio_config = scx200_gpio_configure, @@ -49,84 +55,6 @@ struct nsc_gpio_ops scx200_access = { .gpio_current = scx200_gpio_current }; -static ssize_t scx200_gpio_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) -{ - unsigned m = iminor(file->f_dentry->d_inode); - struct nsc_gpio_ops *amp = file->private_data; - size_t i; - int err = 0; - - for (i = 0; i < len; ++i) { - char c; - if (get_user(c, data + i)) - return -EFAULT; - switch (c) { - case '0': - amp->gpio_set(m, 0); - break; - case '1': - amp->gpio_set(m, 1); - break; - case 'O': - printk(KERN_INFO NAME ": GPIO%d output enabled\n", m); - amp->gpio_config(m, ~1, 1); - break; - case 'o': - printk(KERN_INFO NAME ": GPIO%d output disabled\n", m); - amp->gpio_config(m, ~1, 0); - break; - case 'T': - printk(KERN_INFO NAME ": GPIO%d output is push pull\n", m); - amp->gpio_config(m, ~2, 2); - break; - case 't': - printk(KERN_INFO NAME ": GPIO%d output is open drain\n", m); - amp->gpio_config(m, ~2, 0); - break; - case 'P': - printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m); - amp->gpio_config(m, ~4, 4); - break; - case 'p': - printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m); - amp->gpio_config(m, ~4, 0); - break; - - case 'v': - /* View Current pin settings */ - amp->gpio_dump(m); - break; - case '\n': - /* end of settings string, do nothing */ - break; - default: - printk(KERN_ERR NAME - ": GPIO-%2d bad setting: chr<0x%2x>\n", m, - (int)c); - err++; - } - } - if (err) - return -EINVAL; /* full string handled, report error */ - - return len; -} - -static ssize_t scx200_gpio_read(struct file *file, char __user *buf, - size_t len, loff_t *ppos) -{ - unsigned m = iminor(file->f_dentry->d_inode); - int value; - struct nsc_gpio_ops *amp = file->private_data; - - value = amp->gpio_get(m); - if (put_user(value ? '1' : '0', buf)) - return -EFAULT; - - return 1; -} - static int scx200_gpio_open(struct inode *inode, struct file *file) { unsigned m = iminor(inode); @@ -145,8 +73,8 @@ static int scx200_gpio_release(struct inode *inode, struct file *file) static struct file_operations scx200_gpio_fops = { .owner = THIS_MODULE, - .write = scx200_gpio_write, - .read = scx200_gpio_read, + .write = nsc_gpio_write, + .read = nsc_gpio_read, .open = scx200_gpio_open, .release = scx200_gpio_release, }; -- cgit v1.2.3-18-g5258