From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/char/esp.c | 2630 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2630 insertions(+) create mode 100644 drivers/char/esp.c (limited to 'drivers/char/esp.c') diff --git a/drivers/char/esp.c b/drivers/char/esp.c new file mode 100644 index 00000000000..9f53d2fcc36 --- /dev/null +++ b/drivers/char/esp.c @@ -0,0 +1,2630 @@ +/* + * esp.c - driver for Hayes ESP serial cards + * + * --- Notices from serial.c, upon which this driver is based --- + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now + * much more extensible to support other serial cards based on the + * 16450/16550A UART's. Added support for the AST FourPort and the + * Accent Async board. + * + * set_serial_info fixed to set the flags, custom divisor, and uart + * type fields. Fix suggested by Michael K. Johnson 12/12/92. + * + * 11/95: TIOCMIWAIT, TIOCGICOUNT by Angelo Haritsis + * + * 03/96: Modularised by Angelo Haritsis + * + * rs_set_termios fixed to look also for changes of the input + * flags INPCK, BRKINT, PARMRK, IGNPAR and IGNBRK. + * Bernd Anh�pl 05/17/96. + * + * --- End of notices from serial.c --- + * + * Support for the ESP serial card by Andrew J. Robinson + * (Card detection routine taken from a patch + * by Dennis J. Boylan). Patches to allow use with 2.1.x contributed + * by Chris Faylor. + * + * Most recent changes: (Andrew J. Robinson) + * Support for PIO mode. This allows the driver to work properly with + * multiport cards. + * + * Arnaldo Carvalho de Melo - + * several cleanups, use module_init/module_exit, etc + * + * This module exports the following rs232 io functions: + * + * int espserial_init(void); + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include + +#define NR_PORTS 64 /* maximum number of ports */ +#define NR_PRIMARY 8 /* maximum number of primary ports */ +#define REGION_SIZE 8 /* size of io region to request */ + +/* The following variables can be set by giving module options */ +static int irq[NR_PRIMARY]; /* IRQ for each base port */ +static unsigned int divisor[NR_PRIMARY]; /* custom divisor for each port */ +static unsigned int dma = ESP_DMA_CHANNEL; /* DMA channel */ +static unsigned int rx_trigger = ESP_RX_TRIGGER; +static unsigned int tx_trigger = ESP_TX_TRIGGER; +static unsigned int flow_off = ESP_FLOW_OFF; +static unsigned int flow_on = ESP_FLOW_ON; +static unsigned int rx_timeout = ESP_RX_TMOUT; +static unsigned int pio_threshold = ESP_PIO_THRESHOLD; + +MODULE_LICENSE("GPL"); + +module_param_array(irq, int, NULL, 0); +module_param_array(divisor, uint, NULL, 0); +module_param(dma, uint, 0); +module_param(rx_trigger, uint, 0); +module_param(tx_trigger, uint, 0); +module_param(flow_off, uint, 0); +module_param(flow_on, uint, 0); +module_param(rx_timeout, uint, 0); +module_param(pio_threshold, uint, 0); + +/* END */ + +static char *dma_buffer; +static int dma_bytes; +static struct esp_pio_buffer *free_pio_buf; + +#define DMA_BUFFER_SZ 1024 + +#define WAKEUP_CHARS 1024 + +static char serial_name[] __initdata = "ESP serial driver"; +static char serial_version[] __initdata = "2.2"; + +static struct tty_driver *esp_driver; + +/* serial subtype definitions */ +#define SERIAL_TYPE_NORMAL 1 + +/* + * Serial driver configuration section. Here are the various options: + * + * SERIAL_PARANOIA_CHECK + * Check the magic number for the esp_structure where + * ever possible. + */ + +#undef SERIAL_PARANOIA_CHECK +#define SERIAL_DO_RESTART + +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW + +#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) +#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ + tty->name, (info->flags), serial_driver.refcount,info->count,tty->count,s) +#else +#define DBG_CNT(s) +#endif + +static struct esp_struct *ports; + +static void change_speed(struct esp_struct *info); +static void rs_wait_until_sent(struct tty_struct *, int); + +/* + * The ESP card has a clock rate of 14.7456 MHz (that is, 2**ESPC_SCALE + * times the normal 1.8432 Mhz clock of most serial boards). + */ +#define BASE_BAUD ((1843200 / 16) * (1 << ESPC_SCALE)) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) + +/* + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the memcpy_fromfs blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static unsigned char *tmp_buf; +static DECLARE_MUTEX(tmp_buf_sem); + +static inline int serial_paranoia_check(struct esp_struct *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char badmagic[] = KERN_WARNING + "Warning: bad magic number for serial struct (%s) in %s\n"; + static const char badinfo[] = KERN_WARNING + "Warning: null esp_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != ESP_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +static inline unsigned int serial_in(struct esp_struct *info, int offset) +{ + return inb(info->port + offset); +} + +static inline void serial_out(struct esp_struct *info, int offset, + unsigned char value) +{ + outb(value, info->port+offset); +} + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + spin_lock_irqsave(&info->lock, flags); + if (info->IER & UART_IER_THRI) { + info->IER &= ~UART_IER_THRI; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + } + spin_unlock_irqrestore(&info->lock, flags); +} + +static void rs_start(struct tty_struct *tty) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_start")) + return; + + spin_lock_irqsave(&info->lock, flags); + if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { + info->IER |= UART_IER_THRI; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + } + spin_unlock_irqrestore(&info->lock, flags); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver. + */ +static inline void rs_sched_event(struct esp_struct *info, + int event) +{ + info->event |= 1 << event; + schedule_work(&info->tqueue); +} + +static DEFINE_SPINLOCK(pio_lock); + +static inline struct esp_pio_buffer *get_pio_buffer(void) +{ + struct esp_pio_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&pio_lock, flags); + if (free_pio_buf) { + buf = free_pio_buf; + free_pio_buf = buf->next; + } else { + buf = kmalloc(sizeof(struct esp_pio_buffer), GFP_ATOMIC); + } + spin_unlock_irqrestore(&pio_lock, flags); + return buf; +} + +static inline void release_pio_buffer(struct esp_pio_buffer *buf) +{ + unsigned long flags; + spin_lock_irqsave(&pio_lock, flags); + buf->next = free_pio_buf; + free_pio_buf = buf; + spin_unlock_irqrestore(&pio_lock, flags); +} + +static inline void receive_chars_pio(struct esp_struct *info, int num_bytes) +{ + struct tty_struct *tty = info->tty; + int i; + struct esp_pio_buffer *pio_buf; + struct esp_pio_buffer *err_buf; + unsigned char status_mask; + + pio_buf = get_pio_buffer(); + + if (!pio_buf) + return; + + err_buf = get_pio_buffer(); + + if (!err_buf) { + release_pio_buffer(pio_buf); + return; + } + + status_mask = (info->read_status_mask >> 2) & 0x07; + + for (i = 0; i < num_bytes - 1; i += 2) { + *((unsigned short *)(pio_buf->data + i)) = + inw(info->port + UART_ESI_RX); + err_buf->data[i] = serial_in(info, UART_ESI_RWS); + err_buf->data[i + 1] = (err_buf->data[i] >> 3) & status_mask; + err_buf->data[i] &= status_mask; + } + + if (num_bytes & 0x0001) { + pio_buf->data[num_bytes - 1] = serial_in(info, UART_ESI_RX); + err_buf->data[num_bytes - 1] = + (serial_in(info, UART_ESI_RWS) >> 3) & status_mask; + } + + /* make sure everything is still ok since interrupts were enabled */ + tty = info->tty; + + if (!tty) { + release_pio_buffer(pio_buf); + release_pio_buffer(err_buf); + info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; + return; + } + + status_mask = (info->ignore_status_mask >> 2) & 0x07; + + for (i = 0; i < num_bytes; i++) { + if (!(err_buf->data[i] & status_mask)) { + *(tty->flip.char_buf_ptr++) = pio_buf->data[i]; + + if (err_buf->data[i] & 0x04) { + *(tty->flip.flag_buf_ptr++) = TTY_BREAK; + + if (info->flags & ASYNC_SAK) + do_SAK(tty); + } + else if (err_buf->data[i] & 0x02) + *(tty->flip.flag_buf_ptr++) = TTY_FRAME; + else if (err_buf->data[i] & 0x01) + *(tty->flip.flag_buf_ptr++) = TTY_PARITY; + else + *(tty->flip.flag_buf_ptr++) = 0; + + tty->flip.count++; + } + } + + schedule_delayed_work(&tty->flip.work, 1); + + info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; + release_pio_buffer(pio_buf); + release_pio_buffer(err_buf); +} + +static inline void receive_chars_dma(struct esp_struct *info, int num_bytes) +{ + unsigned long flags; + info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; + dma_bytes = num_bytes; + info->stat_flags |= ESP_STAT_DMA_RX; + + flags=claim_dma_lock(); + disable_dma(dma); + clear_dma_ff(dma); + set_dma_mode(dma, DMA_MODE_READ); + set_dma_addr(dma, isa_virt_to_bus(dma_buffer)); + set_dma_count(dma, dma_bytes); + enable_dma(dma); + release_dma_lock(flags); + + serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX); +} + +static inline void receive_chars_dma_done(struct esp_struct *info, + int status) +{ + struct tty_struct *tty = info->tty; + int num_bytes; + unsigned long flags; + + + flags=claim_dma_lock(); + disable_dma(dma); + clear_dma_ff(dma); + + info->stat_flags &= ~ESP_STAT_DMA_RX; + num_bytes = dma_bytes - get_dma_residue(dma); + release_dma_lock(flags); + + info->icount.rx += num_bytes; + + memcpy(tty->flip.char_buf_ptr, dma_buffer, num_bytes); + tty->flip.char_buf_ptr += num_bytes; + tty->flip.count += num_bytes; + memset(tty->flip.flag_buf_ptr, 0, num_bytes); + tty->flip.flag_buf_ptr += num_bytes; + + if (num_bytes > 0) { + tty->flip.flag_buf_ptr--; + + status &= (0x1c & info->read_status_mask); + + if (status & info->ignore_status_mask) { + tty->flip.count--; + tty->flip.char_buf_ptr--; + tty->flip.flag_buf_ptr--; + } else if (status & 0x10) { + *tty->flip.flag_buf_ptr = TTY_BREAK; + (info->icount.brk)++; + if (info->flags & ASYNC_SAK) + do_SAK(tty); + } else if (status & 0x08) { + *tty->flip.flag_buf_ptr = TTY_FRAME; + (info->icount.frame)++; + } + else if (status & 0x04) { + *tty->flip.flag_buf_ptr = TTY_PARITY; + (info->icount.parity)++; + } + + tty->flip.flag_buf_ptr++; + + schedule_delayed_work(&tty->flip.work, 1); + } + + if (dma_bytes != num_bytes) { + num_bytes = dma_bytes - num_bytes; + dma_bytes = 0; + receive_chars_dma(info, num_bytes); + } else + dma_bytes = 0; +} + +/* Caller must hold info->lock */ + +static inline void transmit_chars_pio(struct esp_struct *info, + int space_avail) +{ + int i; + struct esp_pio_buffer *pio_buf; + + pio_buf = get_pio_buffer(); + + if (!pio_buf) + return; + + while (space_avail && info->xmit_cnt) { + if (info->xmit_tail + space_avail <= ESP_XMIT_SIZE) { + memcpy(pio_buf->data, + &(info->xmit_buf[info->xmit_tail]), + space_avail); + } else { + i = ESP_XMIT_SIZE - info->xmit_tail; + memcpy(pio_buf->data, + &(info->xmit_buf[info->xmit_tail]), i); + memcpy(&(pio_buf->data[i]), info->xmit_buf, + space_avail - i); + } + + info->xmit_cnt -= space_avail; + info->xmit_tail = (info->xmit_tail + space_avail) & + (ESP_XMIT_SIZE - 1); + + for (i = 0; i < space_avail - 1; i += 2) { + outw(*((unsigned short *)(pio_buf->data + i)), + info->port + UART_ESI_TX); + } + + if (space_avail & 0x0001) + serial_out(info, UART_ESI_TX, + pio_buf->data[space_avail - 1]); + + if (info->xmit_cnt) { + serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); + serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); + space_avail = serial_in(info, UART_ESI_STAT1) << 8; + space_avail |= serial_in(info, UART_ESI_STAT2); + + if (space_avail > info->xmit_cnt) + space_avail = info->xmit_cnt; + } + } + + if (info->xmit_cnt < WAKEUP_CHARS) { + rs_sched_event(info, ESP_EVENT_WRITE_WAKEUP); + +#ifdef SERIAL_DEBUG_INTR + printk("THRE..."); +#endif + + if (info->xmit_cnt <= 0) { + info->IER &= ~UART_IER_THRI; + serial_out(info, UART_ESI_CMD1, + ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + } + } + + release_pio_buffer(pio_buf); +} + +/* Caller must hold info->lock */ +static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes) +{ + unsigned long flags; + + dma_bytes = num_bytes; + + if (info->xmit_tail + dma_bytes <= ESP_XMIT_SIZE) { + memcpy(dma_buffer, &(info->xmit_buf[info->xmit_tail]), + dma_bytes); + } else { + int i = ESP_XMIT_SIZE - info->xmit_tail; + memcpy(dma_buffer, &(info->xmit_buf[info->xmit_tail]), + i); + memcpy(&(dma_buffer[i]), info->xmit_buf, dma_bytes - i); + } + + info->xmit_cnt -= dma_bytes; + info->xmit_tail = (info->xmit_tail + dma_bytes) & (ESP_XMIT_SIZE - 1); + + if (info->xmit_cnt < WAKEUP_CHARS) { + rs_sched_event(info, ESP_EVENT_WRITE_WAKEUP); + +#ifdef SERIAL_DEBUG_INTR + printk("THRE..."); +#endif + + if (info->xmit_cnt <= 0) { + info->IER &= ~UART_IER_THRI; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + } + } + + info->stat_flags |= ESP_STAT_DMA_TX; + + flags=claim_dma_lock(); + disable_dma(dma); + clear_dma_ff(dma); + set_dma_mode(dma, DMA_MODE_WRITE); + set_dma_addr(dma, isa_virt_to_bus(dma_buffer)); + set_dma_count(dma, dma_bytes); + enable_dma(dma); + release_dma_lock(flags); + + serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); +} + +static inline void transmit_chars_dma_done(struct esp_struct *info) +{ + int num_bytes; + unsigned long flags; + + + flags=claim_dma_lock(); + disable_dma(dma); + clear_dma_ff(dma); + + num_bytes = dma_bytes - get_dma_residue(dma); + info->icount.tx += dma_bytes; + release_dma_lock(flags); + + if (dma_bytes != num_bytes) { + dma_bytes -= num_bytes; + memmove(dma_buffer, dma_buffer + num_bytes, dma_bytes); + + flags=claim_dma_lock(); + disable_dma(dma); + clear_dma_ff(dma); + set_dma_mode(dma, DMA_MODE_WRITE); + set_dma_addr(dma, isa_virt_to_bus(dma_buffer)); + set_dma_count(dma, dma_bytes); + enable_dma(dma); + release_dma_lock(flags); + + serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); + } else { + dma_bytes = 0; + info->stat_flags &= ~ESP_STAT_DMA_TX; + } +} + +static inline void check_modem_status(struct esp_struct *info) +{ + int status; + + serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); + status = serial_in(info, UART_ESI_STAT2); + + if (status & UART_MSR_ANY_DELTA) { + /* update input line counters */ + if (status & UART_MSR_TERI) + info->icount.rng++; + if (status & UART_MSR_DDSR) + info->icount.dsr++; + if (status & UART_MSR_DDCD) + info->icount.dcd++; + if (status & UART_MSR_DCTS) + info->icount.cts++; + wake_up_interruptible(&info->delta_msr_wait); + } + + if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { +#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) + printk("ttys%d CD now %s...", info->line, + (status & UART_MSR_DCD) ? "on" : "off"); +#endif + if (status & UART_MSR_DCD) + wake_up_interruptible(&info->open_wait); + else { +#ifdef SERIAL_DEBUG_OPEN + printk("scheduling hangup..."); +#endif + schedule_work(&info->tqueue_hangup); + } + } +} + +/* + * This is the serial driver's interrupt routine + */ +static irqreturn_t rs_interrupt_single(int irq, void *dev_id, + struct pt_regs *regs) +{ + struct esp_struct * info; + unsigned err_status; + unsigned int scratch; + +#ifdef SERIAL_DEBUG_INTR + printk("rs_interrupt_single(%d)...", irq); +#endif + info = (struct esp_struct *)dev_id; + err_status = 0; + scratch = serial_in(info, UART_ESI_SID); + + spin_lock(&info->lock); + + if (!info->tty) { + spin_unlock(&info->lock); + return IRQ_NONE; + } + + if (scratch & 0x04) { /* error */ + serial_out(info, UART_ESI_CMD1, ESI_GET_ERR_STAT); + err_status = serial_in(info, UART_ESI_STAT1); + serial_in(info, UART_ESI_STAT2); + + if (err_status & 0x01) + info->stat_flags |= ESP_STAT_RX_TIMEOUT; + + if (err_status & 0x20) /* UART status */ + check_modem_status(info); + + if (err_status & 0x80) /* Start break */ + wake_up_interruptible(&info->break_wait); + } + + if ((scratch & 0x88) || /* DMA completed or timed out */ + (err_status & 0x1c) /* receive error */) { + if (info->stat_flags & ESP_STAT_DMA_RX) + receive_chars_dma_done(info, err_status); + else if (info->stat_flags & ESP_STAT_DMA_TX) + transmit_chars_dma_done(info); + } + + if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) && + ((scratch & 0x01) || (info->stat_flags & ESP_STAT_RX_TIMEOUT)) && + (info->IER & UART_IER_RDI)) { + int num_bytes; + + serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); + serial_out(info, UART_ESI_CMD1, ESI_GET_RX_AVAIL); + num_bytes = serial_in(info, UART_ESI_STAT1) << 8; + num_bytes |= serial_in(info, UART_ESI_STAT2); + + if (num_bytes > (TTY_FLIPBUF_SIZE - info->tty->flip.count)) + num_bytes = TTY_FLIPBUF_SIZE - info->tty->flip.count; + + if (num_bytes) { + if (dma_bytes || + (info->stat_flags & ESP_STAT_USE_PIO) || + (num_bytes <= info->config.pio_threshold)) + receive_chars_pio(info, num_bytes); + else + receive_chars_dma(info, num_bytes); + } + } + + if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) && + (scratch & 0x02) && (info->IER & UART_IER_THRI)) { + if ((info->xmit_cnt <= 0) || info->tty->stopped) { + info->IER &= ~UART_IER_THRI; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + } else { + int num_bytes; + + serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); + serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); + num_bytes = serial_in(info, UART_ESI_STAT1) << 8; + num_bytes |= serial_in(info, UART_ESI_STAT2); + + if (num_bytes > info->xmit_cnt) + num_bytes = info->xmit_cnt; + + if (num_bytes) { + if (dma_bytes || + (info->stat_flags & ESP_STAT_USE_PIO) || + (num_bytes <= info->config.pio_threshold)) + transmit_chars_pio(info, num_bytes); + else + transmit_chars_dma(info, num_bytes); + } + } + } + + info->last_active = jiffies; + +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif + spin_unlock(&info->lock); + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +static void do_softint(void *private_) +{ + struct esp_struct *info = (struct esp_struct *) private_; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + if (test_and_clear_bit(ESP_EVENT_WRITE_WAKEUP, &info->event)) { + tty_wakeup(tty); + } +} + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> esp_hangup() + * + */ +static void do_serial_hangup(void *private_) +{ + struct esp_struct *info = (struct esp_struct *) private_; + struct tty_struct *tty; + + tty = info->tty; + if (tty) + tty_hangup(tty); +} + +/* + * --------------------------------------------------------------- + * Low level utility subroutines for the serial driver: routines to + * figure out the appropriate timeout for an interrupt chain, routines + * to initialize and startup a serial port, and routines to shutdown a + * serial port. Useful stuff like that. + * + * Caller should hold lock + * --------------------------------------------------------------- + */ + +static inline void esp_basic_init(struct esp_struct * info) +{ + /* put ESPC in enhanced mode */ + serial_out(info, UART_ESI_CMD1, ESI_SET_MODE); + + if (info->stat_flags & ESP_STAT_NEVER_DMA) + serial_out(info, UART_ESI_CMD2, 0x01); + else + serial_out(info, UART_ESI_CMD2, 0x31); + + /* disable interrupts for now */ + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, 0x00); + + /* set interrupt and DMA channel */ + serial_out(info, UART_ESI_CMD1, ESI_SET_IRQ); + + if (info->stat_flags & ESP_STAT_NEVER_DMA) + serial_out(info, UART_ESI_CMD2, 0x01); + else + serial_out(info, UART_ESI_CMD2, (dma << 4) | 0x01); + + serial_out(info, UART_ESI_CMD1, ESI_SET_ENH_IRQ); + + if (info->line % 8) /* secondary port */ + serial_out(info, UART_ESI_CMD2, 0x0d); /* shared */ + else if (info->irq == 9) + serial_out(info, UART_ESI_CMD2, 0x02); + else + serial_out(info, UART_ESI_CMD2, info->irq); + + /* set error status mask (check this) */ + serial_out(info, UART_ESI_CMD1, ESI_SET_ERR_MASK); + + if (info->stat_flags & ESP_STAT_NEVER_DMA) + serial_out(info, UART_ESI_CMD2, 0xa1); + else + serial_out(info, UART_ESI_CMD2, 0xbd); + + serial_out(info, UART_ESI_CMD2, 0x00); + + /* set DMA timeout */ + serial_out(info, UART_ESI_CMD1, ESI_SET_DMA_TMOUT); + serial_out(info, UART_ESI_CMD2, 0xff); + + /* set FIFO trigger levels */ + serial_out(info, UART_ESI_CMD1, ESI_SET_TRIGGER); + serial_out(info, UART_ESI_CMD2, info->config.rx_trigger >> 8); + serial_out(info, UART_ESI_CMD2, info->config.rx_trigger); + serial_out(info, UART_ESI_CMD2, info->config.tx_trigger >> 8); + serial_out(info, UART_ESI_CMD2, info->config.tx_trigger); + + /* Set clock scaling and wait states */ + serial_out(info, UART_ESI_CMD1, ESI_SET_PRESCALAR); + serial_out(info, UART_ESI_CMD2, 0x04 | ESPC_SCALE); + + /* set reinterrupt pacing */ + serial_out(info, UART_ESI_CMD1, ESI_SET_REINTR); + serial_out(info, UART_ESI_CMD2, 0xff); +} + +static int startup(struct esp_struct * info) +{ + unsigned long flags; + int retval=0; + unsigned int num_chars; + + spin_lock_irqsave(&info->lock, flags); + + if (info->flags & ASYNC_INITIALIZED) + goto out; + + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_ATOMIC); + retval = -ENOMEM; + if (!info->xmit_buf) + goto out; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttys%d (irq %d)...", info->line, info->irq); +#endif + + /* Flush the RX buffer. Using the ESI flush command may cause */ + /* wild interrupts, so read all the data instead. */ + + serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); + serial_out(info, UART_ESI_CMD1, ESI_GET_RX_AVAIL); + num_chars = serial_in(info, UART_ESI_STAT1) << 8; + num_chars |= serial_in(info, UART_ESI_STAT2); + + while (num_chars > 1) { + inw(info->port + UART_ESI_RX); + num_chars -= 2; + } + + if (num_chars) + serial_in(info, UART_ESI_RX); + + /* set receive character timeout */ + serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); + serial_out(info, UART_ESI_CMD2, info->config.rx_timeout); + + /* clear all flags except the "never DMA" flag */ + info->stat_flags &= ESP_STAT_NEVER_DMA; + + if (info->stat_flags & ESP_STAT_NEVER_DMA) + info->stat_flags |= ESP_STAT_USE_PIO; + + spin_unlock_irqrestore(&info->lock, flags); + + /* + * Allocate the IRQ + */ + + retval = request_irq(info->irq, rs_interrupt_single, SA_SHIRQ, + "esp serial", info); + + if (retval) { + if (capable(CAP_SYS_ADMIN)) { + if (info->tty) + set_bit(TTY_IO_ERROR, + &info->tty->flags); + retval = 0; + } + goto out_unlocked; + } + + if (!(info->stat_flags & ESP_STAT_USE_PIO) && !dma_buffer) { + dma_buffer = (char *)__get_dma_pages( + GFP_KERNEL, get_order(DMA_BUFFER_SZ)); + + /* use PIO mode if DMA buf/chan cannot be allocated */ + if (!dma_buffer) + info->stat_flags |= ESP_STAT_USE_PIO; + else if (request_dma(dma, "esp serial")) { + free_pages((unsigned long)dma_buffer, + get_order(DMA_BUFFER_SZ)); + dma_buffer = NULL; + info->stat_flags |= ESP_STAT_USE_PIO; + } + + } + + info->MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; + + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); + serial_out(info, UART_ESI_CMD2, UART_MCR); + serial_out(info, UART_ESI_CMD2, info->MCR); + + /* + * Finally, enable interrupts + */ + /* info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; */ + info->IER = UART_IER_RLSI | UART_IER_RDI | UART_IER_DMA_TMOUT | + UART_IER_DMA_TC; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + spin_unlock_irqrestore(&info->lock, flags); + + /* + * Set up the tty->alt_speed kludge + */ + if (info->tty) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + } + + /* + * set the speed of the serial port + */ + change_speed(info); + info->flags |= ASYNC_INITIALIZED; + return 0; + +out: + spin_unlock_irqrestore(&info->lock, flags); +out_unlocked: + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct esp_struct * info) +{ + unsigned long flags, f; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....", info->line, + info->irq); +#endif + + spin_lock_irqsave(&info->lock, flags); + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up + */ + wake_up_interruptible(&info->delta_msr_wait); + wake_up_interruptible(&info->break_wait); + + /* stop a DMA transfer on the port being closed */ + /* DMA lock is higher priority always */ + if (info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) { + f=claim_dma_lock(); + disable_dma(dma); + clear_dma_ff(dma); + release_dma_lock(f); + + dma_bytes = 0; + } + + /* + * Free the IRQ + */ + free_irq(info->irq, info); + + if (dma_buffer) { + struct esp_struct *current_port = ports; + + while (current_port) { + if ((current_port != info) && + (current_port->flags & ASYNC_INITIALIZED)) + break; + + current_port = current_port->next_port; + } + + if (!current_port) { + free_dma(dma); + free_pages((unsigned long)dma_buffer, + get_order(DMA_BUFFER_SZ)); + dma_buffer = NULL; + } + } + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = NULL; + } + + info->IER = 0; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, 0x00); + + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); + + info->MCR &= ~UART_MCR_OUT2; + serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); + serial_out(info, UART_ESI_CMD2, UART_MCR); + serial_out(info, UART_ESI_CMD2, info->MCR); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&info->lock, flags); +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void change_speed(struct esp_struct *info) +{ + unsigned short port; + int quot = 0; + unsigned cflag,cval; + int baud, bits; + unsigned char flow1 = 0, flow2 = 0; + unsigned long flags; + + if (!info->tty || !info->tty->termios) + return; + cflag = info->tty->termios->c_cflag; + port = info->port; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: cval = 0x00; bits = 7; break; + case CS6: cval = 0x01; bits = 8; break; + case CS7: cval = 0x02; bits = 9; break; + case CS8: cval = 0x03; bits = 10; break; + default: cval = 0x00; bits = 7; break; + } + if (cflag & CSTOPB) { + cval |= 0x04; + bits++; + } + if (cflag & PARENB) { + cval |= UART_LCR_PARITY; + bits++; + } + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + baud = tty_get_baud_rate(info->tty); + if (baud == 38400 && + ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) + quot = info->custom_divisor; + else { + if (baud == 134) + /* Special case since 134 is really 134.5 */ + quot = (2*BASE_BAUD / 269); + else if (baud) + quot = BASE_BAUD / baud; + } + /* If the quotient is ever zero, default to 9600 bps */ + if (!quot) + quot = BASE_BAUD / 9600; + + info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50); + + /* CTS flow control flag and modem status interrupts */ + /* info->IER &= ~UART_IER_MSI; */ + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + /* info->IER |= UART_IER_MSI; */ + flow1 = 0x04; + flow2 = 0x10; + } else + info->flags &= ~ASYNC_CTS_FLOW; + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else { + info->flags |= ASYNC_CHECK_CD; + /* info->IER |= UART_IER_MSI; */ + } + + /* + * Set up parity check flag + */ +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (I_INPCK(info->tty)) + info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + info->read_status_mask |= UART_LSR_BI; + + info->ignore_status_mask = 0; +#if 0 + /* This should be safe, but for some broken bits of hardware... */ + if (I_IGNPAR(info->tty)) { + info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + info->read_status_mask |= UART_LSR_PE | UART_LSR_FE; + } +#endif + if (I_IGNBRK(info->tty)) { + info->ignore_status_mask |= UART_LSR_BI; + info->read_status_mask |= UART_LSR_BI; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->tty)) { + info->ignore_status_mask |= UART_LSR_OE | \ + UART_LSR_PE | UART_LSR_FE; + info->read_status_mask |= UART_LSR_OE | \ + UART_LSR_PE | UART_LSR_FE; + } + } + + if (I_IXOFF(info->tty)) + flow1 |= 0x81; + + spin_lock_irqsave(&info->lock, flags); + /* set baud */ + serial_out(info, UART_ESI_CMD1, ESI_SET_BAUD); + serial_out(info, UART_ESI_CMD2, quot >> 8); + serial_out(info, UART_ESI_CMD2, quot & 0xff); + + /* set data bits, parity, etc. */ + serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); + serial_out(info, UART_ESI_CMD2, UART_LCR); + serial_out(info, UART_ESI_CMD2, cval); + + /* Enable flow control */ + serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CNTL); + serial_out(info, UART_ESI_CMD2, flow1); + serial_out(info, UART_ESI_CMD2, flow2); + + /* set flow control characters (XON/XOFF only) */ + if (I_IXOFF(info->tty)) { + serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CHARS); + serial_out(info, UART_ESI_CMD2, START_CHAR(info->tty)); + serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->tty)); + serial_out(info, UART_ESI_CMD2, 0x10); + serial_out(info, UART_ESI_CMD2, 0x21); + switch (cflag & CSIZE) { + case CS5: + serial_out(info, UART_ESI_CMD2, 0x1f); + break; + case CS6: + serial_out(info, UART_ESI_CMD2, 0x3f); + break; + case CS7: + case CS8: + serial_out(info, UART_ESI_CMD2, 0x7f); + break; + default: + serial_out(info, UART_ESI_CMD2, 0xff); + break; + } + } + + /* Set high/low water */ + serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_LVL); + serial_out(info, UART_ESI_CMD2, info->config.flow_off >> 8); + serial_out(info, UART_ESI_CMD2, info->config.flow_off); + serial_out(info, UART_ESI_CMD2, info->config.flow_on >> 8); + serial_out(info, UART_ESI_CMD2, info->config.flow_on); + + spin_unlock_irqrestore(&info->lock, flags); +} + +static void rs_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_put_char")) + return; + + if (!tty || !info->xmit_buf) + return; + + spin_lock_irqsave(&info->lock, flags); + if (info->xmit_cnt < ESP_XMIT_SIZE - 1) { + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= ESP_XMIT_SIZE-1; + info->xmit_cnt++; + } + spin_unlock_irqrestore(&info->lock, flags); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) + return; + + spin_lock_irqsave(&info->lock, flags); + + if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf) + goto out; + + if (!(info->IER & UART_IER_THRI)) { + info->IER |= UART_IER_THRI; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + } +out: + spin_unlock_irqrestore(&info->lock, flags); +} + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, t, ret = 0; + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty || !info->xmit_buf || !tmp_buf) + return 0; + + while (1) { + /* Thanks to R. Wolff for suggesting how to do this with */ + /* interrupts enabled */ + + c = count; + t = ESP_XMIT_SIZE - info->xmit_cnt - 1; + + if (t < c) + c = t; + + t = ESP_XMIT_SIZE - info->xmit_head; + + if (t < c) + c = t; + + if (c <= 0) + break; + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + + info->xmit_head = (info->xmit_head + c) & (ESP_XMIT_SIZE-1); + info->xmit_cnt += c; + buf += c; + count -= c; + ret += c; + } + + spin_lock_irqsave(&info->lock, flags); + + if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) { + info->IER |= UART_IER_THRI; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + } + + spin_unlock_irqrestore(&info->lock, flags); + return ret; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + int ret; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + + spin_lock_irqsave(&info->lock, flags); + + ret = ESP_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + spin_unlock_irqrestore(&info->lock, flags); + return ret; +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + spin_lock_irqsave(&info->lock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + spin_unlock_irqrestore(&info->lock, flags); + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + spin_lock_irqsave(&info->lock, flags); + info->IER &= ~UART_IER_RDI; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); + serial_out(info, UART_ESI_CMD2, 0x00); + spin_unlock_irqrestore(&info->lock, flags); +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + spin_lock_irqsave(&info->lock, flags); + info->IER |= UART_IER_RDI; + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); + serial_out(info, UART_ESI_CMD2, info->config.rx_timeout); + spin_unlock_irqrestore(&info->lock, flags); +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct esp_struct * info, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + tmp.type = PORT_16550A; + tmp.line = info->line; + tmp.port = info->port; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.xmit_fifo_size = 1024; + tmp.baud_base = BASE_BAUD; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + tmp.hub6 = 0; + if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int get_esp_config(struct esp_struct * info, + struct hayes_esp_config __user *retinfo) +{ + struct hayes_esp_config tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + tmp.rx_timeout = info->config.rx_timeout; + tmp.rx_trigger = info->config.rx_trigger; + tmp.tx_trigger = info->config.tx_trigger; + tmp.flow_off = info->config.flow_off; + tmp.flow_on = info->config.flow_on; + tmp.pio_threshold = info->config.pio_threshold; + tmp.dma_channel = (info->stat_flags & ESP_STAT_NEVER_DMA ? 0 : dma); + + return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; +} + +static int set_serial_info(struct esp_struct * info, + struct serial_struct __user *new_info) +{ + struct serial_struct new_serial; + struct esp_struct old_info; + unsigned int change_irq; + int retval = 0; + struct esp_struct *current_async; + + if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if ((new_serial.type != PORT_16550A) || + (new_serial.hub6) || + (info->port != new_serial.port) || + (new_serial.baud_base != BASE_BAUD) || + (new_serial.irq > 15) || + (new_serial.irq < 2) || + (new_serial.irq == 6) || + (new_serial.irq == 8) || + (new_serial.irq == 13)) + return -EINVAL; + + change_irq = new_serial.irq != info->irq; + + if (change_irq && (info->line % 8)) + return -EINVAL; + + if (!capable(CAP_SYS_ADMIN)) { + if (change_irq || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (info->flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + info->custom_divisor = new_serial.custom_divisor; + } else { + if (new_serial.irq == 2) + new_serial.irq = 9; + + if (change_irq) { + current_async = ports; + + while (current_async) { + if ((current_async->line >= info->line) && + (current_async->line < (info->line + 8))) { + if (current_async == info) { + if (current_async->count > 1) + return -EBUSY; + } else if (current_async->count) + return -EBUSY; + } + + current_async = current_async->next_port; + } + } + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->custom_divisor = new_serial.custom_divisor; + info->close_delay = new_serial.close_delay * HZ/100; + info->closing_wait = new_serial.closing_wait * HZ/100; + + if (change_irq) { + /* + * We need to shutdown the serial port at the old + * port/irq combination. + */ + shutdown(info); + + current_async = ports; + + while (current_async) { + if ((current_async->line >= info->line) && + (current_async->line < (info->line + 8))) + current_async->irq = new_serial.irq; + + current_async = current_async->next_port; + } + + serial_out(info, UART_ESI_CMD1, ESI_SET_ENH_IRQ); + if (info->irq == 9) + serial_out(info, UART_ESI_CMD2, 0x02); + else + serial_out(info, UART_ESI_CMD2, info->irq); + } + } + + if (info->flags & ASYNC_INITIALIZED) { + if (((old_info.flags & ASYNC_SPD_MASK) != + (info->flags & ASYNC_SPD_MASK)) || + (old_info.custom_divisor != info->custom_divisor)) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + change_speed(info); + } + } else + retval = startup(info); + + return retval; +} + +static int set_esp_config(struct esp_struct * info, + struct hayes_esp_config __user * new_info) +{ + struct hayes_esp_config new_config; + unsigned int change_dma; + int retval = 0; + struct esp_struct *current_async; + unsigned long flags; + + /* Perhaps a non-sysadmin user should be able to do some of these */ + /* operations. I haven't decided yet. */ + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (copy_from_user(&new_config, new_info, sizeof(new_config))) + return -EFAULT; + + if ((new_config.flow_on >= new_config.flow_off) || + (new_config.rx_trigger < 1) || + (new_config.tx_trigger < 1) || + (new_config.flow_off < 1) || + (new_config.flow_on < 1) || + (new_config.rx_trigger > 1023) || + (new_config.tx_trigger > 1023) || + (new_config.flow_off > 1023) || + (new_config.flow_on > 1023) || + (new_config.pio_threshold < 0) || + (new_config.pio_threshold > 1024)) + return -EINVAL; + + if ((new_config.dma_channel != 1) && (new_config.dma_channel != 3)) + new_config.dma_channel = 0; + + if (info->stat_flags & ESP_STAT_NEVER_DMA) + change_dma = new_config.dma_channel; + else + change_dma = (new_config.dma_channel != dma); + + if (change_dma) { + if (new_config.dma_channel) { + /* PIO mode to DMA mode transition OR */ + /* change current DMA channel */ + + current_async = ports; + + while (current_async) { + if (current_async == info) { + if (current_async->count > 1) + return -EBUSY; + } else if (current_async->count) + return -EBUSY; + + current_async = + current_async->next_port; + } + + shutdown(info); + dma = new_config.dma_channel; + info->stat_flags &= ~ESP_STAT_NEVER_DMA; + + /* all ports must use the same DMA channel */ + + spin_lock_irqsave(&info->lock, flags); + current_async = ports; + + while (current_async) { + esp_basic_init(current_async); + current_async = current_async->next_port; + } + spin_unlock_irqrestore(&info->lock, flags); + } else { + /* DMA mode to PIO mode only */ + + if (info->count > 1) + return -EBUSY; + + shutdown(info); + spin_lock_irqsave(&info->lock, flags); + info->stat_flags |= ESP_STAT_NEVER_DMA; + esp_basic_init(info); + spin_unlock_irqrestore(&info->lock, flags); + } + } + + info->config.pio_threshold = new_config.pio_threshold; + + if ((new_config.flow_off != info->config.flow_off) || + (new_config.flow_on != info->config.flow_on)) { + unsigned long flags; + + info->config.flow_off = new_config.flow_off; + info->config.flow_on = new_config.flow_on; + + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_LVL); + serial_out(info, UART_ESI_CMD2, new_config.flow_off >> 8); + serial_out(info, UART_ESI_CMD2, new_config.flow_off); + serial_out(info, UART_ESI_CMD2, new_config.flow_on >> 8); + serial_out(info, UART_ESI_CMD2, new_config.flow_on); + spin_unlock_irqrestore(&info->lock, flags); + } + + if ((new_config.rx_trigger != info->config.rx_trigger) || + (new_config.tx_trigger != info->config.tx_trigger)) { + unsigned long flags; + + info->config.rx_trigger = new_config.rx_trigger; + info->config.tx_trigger = new_config.tx_trigger; + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_SET_TRIGGER); + serial_out(info, UART_ESI_CMD2, + new_config.rx_trigger >> 8); + serial_out(info, UART_ESI_CMD2, new_config.rx_trigger); + serial_out(info, UART_ESI_CMD2, + new_config.tx_trigger >> 8); + serial_out(info, UART_ESI_CMD2, new_config.tx_trigger); + spin_unlock_irqrestore(&info->lock, flags); + } + + if (new_config.rx_timeout != info->config.rx_timeout) { + unsigned long flags; + + info->config.rx_timeout = new_config.rx_timeout; + spin_lock_irqsave(&info->lock, flags); + + if (info->IER & UART_IER_RDI) { + serial_out(info, UART_ESI_CMD1, + ESI_SET_RX_TIMEOUT); + serial_out(info, UART_ESI_CMD2, + new_config.rx_timeout); + } + + spin_unlock_irqrestore(&info->lock, flags); + } + + if (!(info->flags & ASYNC_INITIALIZED)) + retval = startup(info); + + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct esp_struct * info, unsigned int __user *value) +{ + unsigned char status; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); + status = serial_in(info, UART_ESI_STAT1); + spin_unlock_irqrestore(&info->lock, flags); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result,value); +} + + +static int esp_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct esp_struct * info = (struct esp_struct *)tty->driver_data; + unsigned char control, status; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + control = info->MCR; + + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); + status = serial_in(info, UART_ESI_STAT2); + spin_unlock_irqrestore(&info->lock, flags); + + return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) + | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) + | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) + | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) + | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) + | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +} + +static int esp_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct esp_struct * info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + spin_lock_irqsave(&info->lock, flags); + + if (set & TIOCM_RTS) + info->MCR |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->MCR |= UART_MCR_DTR; + + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; + + serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); + serial_out(info, UART_ESI_CMD2, UART_MCR); + serial_out(info, UART_ESI_CMD2, info->MCR); + + spin_unlock_irqrestore(&info->lock, flags); + return 0; +} + +/* + * rs_break() --- routine which turns the break handling on or off + */ +static void esp_break(struct tty_struct *tty, int break_state) +{ + struct esp_struct * info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "esp_break")) + return; + + if (break_state == -1) { + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_ISSUE_BREAK); + serial_out(info, UART_ESI_CMD2, 0x01); + spin_unlock_irqrestore(&info->lock, flags); + + /* FIXME - new style wait needed here */ + interruptible_sleep_on(&info->break_wait); + } else { + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_ISSUE_BREAK); + serial_out(info, UART_ESI_CMD2, 0x00); + spin_unlock_irqrestore(&info->lock, flags); + } +} + +static int rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct esp_struct * info = (struct esp_struct *)tty->driver_data; + struct async_icount cprev, cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; /* user space */ + void __user *argp = (void __user *)arg; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT) && + (cmd != TIOCGHAYESESP) && (cmd != TIOCSHAYESESP)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(info, argp); + case TIOCSSERIAL: + return set_serial_info(info, argp); + case TIOCSERCONFIG: + /* do not reconfigure after initial configuration */ + return 0; + + case TIOCSERGWILD: + return put_user(0L, (unsigned long __user *)argp); + + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, argp); + + case TIOCSERSWILD: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + return 0; + + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + spin_lock_irqsave(&info->lock, flags); + cprev = info->icount; /* note the counters on entry */ + spin_unlock_irqrestore(&info->lock, flags); + while (1) { + /* FIXME: convert to new style wakeup */ + interruptible_sleep_on(&info->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + spin_lock_irqsave(&info->lock, flags); + cnow = info->icount; /* atomic copy */ + spin_unlock_irqrestore(&info->lock, flags); + if (cnow.rng == cprev.rng && + cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && + cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && + (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && + (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && + (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && + (cnow.cts != cprev.cts)) ) { + return 0; + } + cprev = cnow; + } + /* NOTREACHED */ + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + case TIOCGICOUNT: + spin_lock_irqsave(&info->lock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock, flags); + p_cuser = argp; + if (put_user(cnow.cts, &p_cuser->cts) || + put_user(cnow.dsr, &p_cuser->dsr) || + put_user(cnow.rng, &p_cuser->rng) || + put_user(cnow.dcd, &p_cuser->dcd)) + return -EFAULT; + + return 0; + case TIOCGHAYESESP: + return get_esp_config(info, argp); + case TIOCSHAYESESP: + return set_esp_config(info, argp); + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if ( (tty->termios->c_cflag == old_termios->c_cflag) + && ( RELEVANT_IFLAG(tty->termios->c_iflag) + == RELEVANT_IFLAG(old_termios->c_iflag))) + return; + + change_speed(info); + + spin_lock_irqsave(&info->lock, flags); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && + !(tty->termios->c_cflag & CBAUD)) { + info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); + serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); + serial_out(info, UART_ESI_CMD2, UART_MCR); + serial_out(info, UART_ESI_CMD2, info->MCR); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + (tty->termios->c_cflag & CBAUD)) { + info->MCR |= (UART_MCR_DTR | UART_MCR_RTS); + serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); + serial_out(info, UART_ESI_CMD2, UART_MCR); + serial_out(info, UART_ESI_CMD2, info->MCR); + } + + spin_unlock_irqrestore(&info->lock, flags); + + /* Handle turning of CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + rs_start(tty); + } +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct esp_struct * info = (struct esp_struct *)tty->driver_data; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + spin_lock_irqsave(&info->lock, flags); + + if (tty_hung_up_p(filp)) { + DBG_CNT("before DEC-hung"); + goto out; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_close ttys%d, count = %d\n", info->line, info->count); +#endif + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk("rs_close: bad serial port count for ttys%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + DBG_CNT("before DEC-2"); + goto out; + } + info->flags |= ASYNC_CLOSING; + + spin_unlock_irqrestore(&info->lock, flags); + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + /* info->IER &= ~UART_IER_RLSI; */ + info->IER &= ~UART_IER_RDI; + info->read_status_mask &= ~UART_LSR_DR; + if (info->flags & ASYNC_INITIALIZED) { + + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); + serial_out(info, UART_ESI_CMD2, info->IER); + + /* disable receive timeout */ + serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); + serial_out(info, UART_ESI_CMD2, 0x00); + + spin_unlock_irqrestore(&info->lock, flags); + + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + rs_wait_until_sent(tty, info->timeout); + } + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->tty = NULL; + + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + return; + +out: + spin_unlock_irqrestore(&info->lock, flags); +} + +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct esp_struct *info = (struct esp_struct *)tty->driver_data; + unsigned long orig_jiffies, char_time; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) + return; + + orig_jiffies = jiffies; + char_time = ((info->timeout - HZ / 50) / 1024) / 5; + + if (!char_time) + char_time = 1; + + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); + serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); + + while ((serial_in(info, UART_ESI_STAT1) != 0x03) || + (serial_in(info, UART_ESI_STAT2) != 0xff)) { + + spin_unlock_irqrestore(&info->lock, flags); + msleep_interruptible(jiffies_to_msecs(char_time)); + + if (signal_pending(current)) + break; + + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + + spin_lock_irqsave(&info->lock, flags); + serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); + serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); + } + spin_unlock_irqrestore(&info->lock, flags); + set_current_state(TASK_RUNNING); +} + +/* + * esp_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void esp_hangup(struct tty_struct *tty) +{ + struct esp_struct * info = (struct esp_struct *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "esp_hangup")) + return; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * esp_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct esp_struct *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + unsigned long flags; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttys%d, count = %d\n", + info->line, info->count); +#endif + spin_lock_irqsave(&info->lock, flags); + if (!tty_hung_up_p(filp)) + info->count--; + info->blocked_open++; + while (1) { + if ((tty->termios->c_cflag & CBAUD)) { + unsigned int scratch; + + serial_out(info, UART_ESI_CMD1, ESI_READ_UART); + serial_out(info, UART_ESI_CMD2, UART_MCR); + scratch = serial_in(info, UART_ESI_STAT1); + serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); + serial_out(info, UART_ESI_CMD2, UART_MCR); + serial_out(info, UART_ESI_CMD2, + scratch | UART_MCR_DTR | UART_MCR_RTS); + } + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + + serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); + if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) + do_clocal = 1; + + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal)) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttys%d, count = %d\n", + info->line, info->count); +#endif + spin_unlock_irqrestore(&info->lock, flags); + schedule(); + spin_lock_irqsave(&info->lock, flags); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + info->count++; + info->blocked_open--; + spin_unlock_irqrestore(&info->lock, flags); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttys%d, count = %d\n", + info->line, info->count); +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int esp_open(struct tty_struct *tty, struct file * filp) +{ + struct esp_struct *info; + int retval, line; + unsigned long flags; + + line = tty->index; + if ((line < 0) || (line >= NR_PORTS)) + return -ENODEV; + + /* find the port in the chain */ + + info = ports; + + while (info && (info->line != line)) + info = info->next_port; + + if (!info) { + serial_paranoia_check(info, tty->name, "esp_open"); + return -ENODEV; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("esp_open %s, count = %d\n", tty->name, info->count); +#endif + spin_lock_irqsave(&info->lock, flags); + info->count++; + tty->driver_data = info; + info->tty = tty; + + if (!tmp_buf) { + tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); + if (!tmp_buf) + return -ENOMEM; + } + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("esp_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("esp_open %s successful...", tty->name); +#endif + return 0; +} + +/* + * --------------------------------------------------------------------- + * espserial_init() and friends + * + * espserial_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ + +static inline void show_serial_version(void) +{ + printk(KERN_INFO "%s version %s (DMA %u)\n", + serial_name, serial_version, dma); +} + +/* + * This routine is called by espserial_init() to initialize a specific serial + * port. + */ +static inline int autoconfig(struct esp_struct * info) +{ + int port_detected = 0; + unsigned long flags; + + if (!request_region(info->port, REGION_SIZE, "esp serial")) + return -EIO; + + spin_lock_irqsave(&info->lock, flags); + /* + * Check for ESP card + */ + + if (serial_in(info, UART_ESI_BASE) == 0xf3) { + serial_out(info, UART_ESI_CMD1, 0x00); + serial_out(info, UART_ESI_CMD1, 0x01); + + if ((serial_in(info, UART_ESI_STAT2) & 0x70) == 0x20) { + port_detected = 1; + + if (!(info->irq)) { + serial_out(info, UART_ESI_CMD1, 0x02); + + if (serial_in(info, UART_ESI_STAT1) & 0x01) + info->irq = 3; + else + info->irq = 4; + } + + + /* put card in enhanced mode */ + /* this prevents access through */ + /* the "old" IO ports */ + esp_basic_init(info); + + /* clear out MCR */ + serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); + serial_out(info, UART_ESI_CMD2, UART_MCR); + serial_out(info, UART_ESI_CMD2, 0x00); + } + } + if (!port_detected) + release_region(info->port, REGION_SIZE); + + spin_unlock_irqrestore(&info->lock, flags); + return (port_detected); +} + +static struct tty_operations esp_ops = { + .open = esp_open, + .close = rs_close, + .write = rs_write, + .put_char = rs_put_char, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = esp_hangup, + .break_ctl = esp_break, + .wait_until_sent = rs_wait_until_sent, + .tiocmget = esp_tiocmget, + .tiocmset = esp_tiocmset, +}; + +/* + * The serial driver boot-time initialization code! + */ +static int __init espserial_init(void) +{ + int i, offset; + struct esp_struct * info; + struct esp_struct *last_primary = NULL; + int esp[] = {0x100,0x140,0x180,0x200,0x240,0x280,0x300,0x380}; + + esp_driver = alloc_tty_driver(NR_PORTS); + if (!esp_driver) + return -ENOMEM; + + for (i = 0; i < NR_PRIMARY; i++) { + if (irq[i] != 0) { + if ((irq[i] < 2) || (irq[i] > 15) || (irq[i] == 6) || + (irq[i] == 8) || (irq[i] == 13)) + irq[i] = 0; + else if (irq[i] == 2) + irq[i] = 9; + } + } + + if ((dma != 1) && (dma != 3)) + dma = 0; + + if ((rx_trigger < 1) || (rx_trigger > 1023)) + rx_trigger = 768; + + if ((tx_trigger < 1) || (tx_trigger > 1023)) + tx_trigger = 768; + + if ((flow_off < 1) || (flow_off > 1023)) + flow_off = 1016; + + if ((flow_on < 1) || (flow_on > 1023)) + flow_on = 944; + + if ((rx_timeout < 0) || (rx_timeout > 255)) + rx_timeout = 128; + + if (flow_on >= flow_off) + flow_on = flow_off - 1; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + + esp_driver->owner = THIS_MODULE; + esp_driver->name = "ttyP"; + esp_driver->devfs_name = "tts/P"; + esp_driver->major = ESP_IN_MAJOR; + esp_driver->minor_start = 0; + esp_driver->type = TTY_DRIVER_TYPE_SERIAL; + esp_driver->subtype = SERIAL_TYPE_NORMAL; + esp_driver->init_termios = tty_std_termios; + esp_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + esp_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(esp_driver, &esp_ops); + if (tty_register_driver(esp_driver)) + { + printk(KERN_ERR "Couldn't register esp serial driver"); + put_tty_driver(esp_driver); + return 1; + } + + info = kmalloc(sizeof(struct esp_struct), GFP_KERNEL); + + if (!info) + { + printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); + tty_unregister_driver(esp_driver); + put_tty_driver(esp_driver); + return 1; + } + + memset((void *)info, 0, sizeof(struct esp_struct)); + /* rx_trigger, tx_trigger are needed by autoconfig */ + info->config.rx_trigger = rx_trigger; + info->config.tx_trigger = tx_trigger; + + i = 0; + offset = 0; + + do { + info->port = esp[i] + offset; + info->irq = irq[i]; + info->line = (i * 8) + (offset / 8); + + if (!autoconfig(info)) { + i++; + offset = 0; + continue; + } + + info->custom_divisor = (divisor[i] >> (offset / 2)) & 0xf; + info->flags = STD_COM_FLAGS; + if (info->custom_divisor) + info->flags |= ASYNC_SPD_CUST; + info->magic = ESP_MAGIC; + info->close_delay = 5*HZ/10; + info->closing_wait = 30*HZ; + INIT_WORK(&info->tqueue, do_softint, info); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); + info->config.rx_timeout = rx_timeout; + info->config.flow_on = flow_on; + info->config.flow_off = flow_off; + info->config.pio_threshold = pio_threshold; + info->next_port = ports; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->delta_msr_wait); + init_waitqueue_head(&info->break_wait); + spin_lock_init(&info->lock); + ports = info; + printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ", + info->line, info->port, info->irq); + + if (info->line % 8) { + printk("secondary port\n"); + /* 8 port cards can't do DMA */ + info->stat_flags |= ESP_STAT_NEVER_DMA; + + if (last_primary) + last_primary->stat_flags |= ESP_STAT_NEVER_DMA; + } else { + printk("primary port\n"); + last_primary = info; + irq[i] = info->irq; + } + + if (!dma) + info->stat_flags |= ESP_STAT_NEVER_DMA; + + info = kmalloc(sizeof(struct esp_struct), GFP_KERNEL); + if (!info) + { + printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); + + /* allow use of the already detected ports */ + return 0; + } + + memset((void *)info, 0, sizeof(struct esp_struct)); + /* rx_trigger, tx_trigger are needed by autoconfig */ + info->config.rx_trigger = rx_trigger; + info->config.tx_trigger = tx_trigger; + + if (offset == 56) { + i++; + offset = 0; + } else { + offset += 8; + } + } while (i < NR_PRIMARY); + + /* free the last port memory allocation */ + kfree(info); + + return 0; +} + +static void __exit espserial_exit(void) +{ + int e1; + struct esp_struct *temp_async; + struct esp_pio_buffer *pio_buf; + + /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ + if ((e1 = tty_unregister_driver(esp_driver))) + printk("SERIAL: failed to unregister serial driver (%d)\n", + e1); + put_tty_driver(esp_driver); + + while (ports) { + if (ports->port) { + release_region(ports->port, REGION_SIZE); + } + temp_async = ports->next_port; + kfree(ports); + ports = temp_async; + } + + if (dma_buffer) + free_pages((unsigned long)dma_buffer, + get_order(DMA_BUFFER_SZ)); + + if (tmp_buf) + free_page((unsigned long)tmp_buf); + + while (free_pio_buf) { + pio_buf = free_pio_buf->next; + kfree(free_pio_buf); + free_pio_buf = pio_buf; + } +} + +module_init(espserial_init); +module_exit(espserial_exit); -- cgit v1.2.3-18-g5258