From 56a68a500fcab9e3a9a49ca7fbef14230ab7d144 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 13 Jul 2007 07:54:30 +0200 Subject: more ACSI removal This patch removes some code that became dead code after the ATARI_ACSI removal. It also indirectly fixes the following bug introduced by commit c2bcf3b8978c291e1b7f6499475c8403a259d4d6: config ATARI_SLM tristate "Atari SLM laser printer support" - depends on ATARI && ATARI_ACSI!=n + depends on ATARI Acked-by: Geert Uytterhoeven Signed-off-by: Adrian Bunk Signed-off-by: Jens Axboe --- drivers/block/Kconfig | 11 - drivers/block/Makefile | 1 - drivers/block/acsi_slm.c | 1032 ---------------------------------------------- 3 files changed, 1044 deletions(-) delete mode 100644 drivers/block/acsi_slm.c (limited to 'drivers/block') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 6e23af1ecbd..95d6838c4ff 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -59,17 +59,6 @@ config AMIGA_Z2RAM To compile this driver as a module, choose M here: the module will be called z2ram. -config ATARI_SLM - tristate "Atari SLM laser printer support" - depends on ATARI - help - If you have an Atari SLM laser printer, say Y to include support for - it in the kernel. Otherwise, say N. This driver is also available as - a module ( = code which can be inserted in and removed from the - running kernel whenever you want). The module will be called - acsi_slm. Be warned: the driver needs much ST-RAM and can cause - problems due to that fact! - config BLK_DEV_XD tristate "XT hard disk support" depends on ISA && ISA_DMA_API diff --git a/drivers/block/Makefile b/drivers/block/Makefile index e5f98acc5d5..bba3119b28c 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY) += swim3.o obj-$(CONFIG_BLK_DEV_FD) += floppy.o obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o -obj-$(CONFIG_ATARI_SLM) += acsi_slm.o obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o obj-$(CONFIG_BLK_DEV_RAM) += rd.o obj-$(CONFIG_BLK_DEV_LOOP) += loop.o diff --git a/drivers/block/acsi_slm.c b/drivers/block/acsi_slm.c deleted file mode 100644 index 1d9d9b4f48c..00000000000 --- a/drivers/block/acsi_slm.c +++ /dev/null @@ -1,1032 +0,0 @@ -/* - * acsi_slm.c -- Device driver for the Atari SLM laser printer - * - * Copyright 1995 Roman Hodek - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - * - */ - -/* - -Notes: - -The major number for SLM printers is 28 (like ACSI), but as a character -device, not block device. The minor number is the number of the printer (if -you have more than one SLM; currently max. 2 (#define-constant) SLMs are -supported). The device can be opened for reading and writing. If reading it, -you get some status infos (MODE SENSE data). Writing mode is used for the data -to be printed. Some ioctls allow to get the printer status and to tune printer -modes and some internal variables. - -A special problem of the SLM driver is the timing and thus the buffering of -the print data. The problem is that all the data for one page must be present -in memory when printing starts, else --when swapping occurs-- the timing could -not be guaranteed. There are several ways to assure this: - - 1) Reserve a buffer of 1196k (maximum page size) statically by - atari_stram_alloc(). The data are collected there until they're complete, - and then printing starts. Since the buffer is reserved, no further - considerations about memory and swapping are needed. So this is the - simplest method, but it needs a lot of memory for just the SLM. - - An striking advantage of this method is (supposed the SLM_CONT_CNT_REPROG - method works, see there), that there are no timing problems with the DMA - anymore. - - 2) The other method would be to reserve the buffer dynamically each time - printing is required. I could think of looking at mem_map where the - largest unallocted ST-RAM area is, taking the area, and then extending it - by swapping out the neighbored pages, until the needed size is reached. - This requires some mm hacking, but seems possible. The only obstacle could - be pages that cannot be swapped out (reserved pages)... - - 3) Another possibility would be to leave the real data in user space and to - work with two dribble buffers of about 32k in the driver: While the one - buffer is DMAed to the SLM, the other can be filled with new data. But - to keep the timing, that requires that the user data remain in memory and - are not swapped out. Requires mm hacking, too, but maybe not so bad as - method 2). - -*/ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#undef DEBUG - -/* Define this if the page data are continuous in physical memory. That - * requires less reprogramming of the ST-DMA */ -#define SLM_CONTINUOUS_DMA - -/* Use continuous reprogramming of the ST-DMA counter register. This is - * --strictly speaking-- not allowed, Atari recommends not to look at the - * counter register while a DMA is going on. But I don't know if that applies - * only for reading the register, or also writing to it. Writing only works - * fine for me... The advantage is that the timing becomes absolutely - * uncritical: Just update each, say 200ms, the counter reg to its maximum, - * and the DMA will work until the status byte interrupt occurs. - */ -#define SLM_CONT_CNT_REPROG - -#define CMDSET_TARG_LUN(cmd,targ,lun) \ - do { \ - cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5; \ - cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5; \ - } while(0) - -#define START_TIMER(to) mod_timer(&slm_timer, jiffies + (to)) -#define STOP_TIMER() del_timer(&slm_timer) - - -static char slmreqsense_cmd[6] = { 0x03, 0, 0, 0, 0, 0 }; -static char slmprint_cmd[6] = { 0x0a, 0, 0, 0, 0, 0 }; -static char slminquiry_cmd[6] = { 0x12, 0, 0, 0, 0, 0x80 }; -static char slmmsense_cmd[6] = { 0x1a, 0, 0, 0, 255, 0 }; -#if 0 -static char slmmselect_cmd[6] = { 0x15, 0, 0, 0, 0, 0 }; -#endif - - -#define MAX_SLM 2 - -static struct slm { - unsigned target; /* target number */ - unsigned lun; /* LUN in target controller */ - atomic_t wr_ok; /* set to 0 if output part busy */ - atomic_t rd_ok; /* set to 0 if status part busy */ -} slm_info[MAX_SLM]; - -int N_SLM_Printers = 0; - -/* printer buffer */ -static unsigned char *SLMBuffer; /* start of buffer */ -static unsigned char *BufferP; /* current position in buffer */ -static int BufferSize; /* length of buffer for page size */ - -typedef enum { IDLE, FILLING, PRINTING } SLMSTATE; -static SLMSTATE SLMState; -static int SLMBufOwner; /* SLM# currently using the buffer */ - -/* DMA variables */ -#ifndef SLM_CONT_CNT_REPROG -static unsigned long SLMCurAddr; /* current base addr of DMA chunk */ -static unsigned long SLMEndAddr; /* expected end addr */ -static unsigned long SLMSliceSize; /* size of one DMA chunk */ -#endif -static int SLMError; - -/* wait queues */ -static DECLARE_WAIT_QUEUE_HEAD(slm_wait); /* waiting for buffer */ -static DECLARE_WAIT_QUEUE_HEAD(print_wait); /* waiting for printing finished */ - -/* status codes */ -#define SLMSTAT_OK 0x00 -#define SLMSTAT_ORNERY 0x02 -#define SLMSTAT_TONER 0x03 -#define SLMSTAT_WARMUP 0x04 -#define SLMSTAT_PAPER 0x05 -#define SLMSTAT_DRUM 0x06 -#define SLMSTAT_INJAM 0x07 -#define SLMSTAT_THRJAM 0x08 -#define SLMSTAT_OUTJAM 0x09 -#define SLMSTAT_COVER 0x0a -#define SLMSTAT_FUSER 0x0b -#define SLMSTAT_IMAGER 0x0c -#define SLMSTAT_MOTOR 0x0d -#define SLMSTAT_VIDEO 0x0e -#define SLMSTAT_SYSTO 0x10 -#define SLMSTAT_OPCODE 0x12 -#define SLMSTAT_DEVNUM 0x15 -#define SLMSTAT_PARAM 0x1a -#define SLMSTAT_ACSITO 0x1b /* driver defined */ -#define SLMSTAT_NOTALL 0x1c /* driver defined */ - -static char *SLMErrors[] = { - /* 0x00 */ "OK and ready", - /* 0x01 */ NULL, - /* 0x02 */ "ornery printer", - /* 0x03 */ "toner empty", - /* 0x04 */ "warming up", - /* 0x05 */ "paper empty", - /* 0x06 */ "drum empty", - /* 0x07 */ "input jam", - /* 0x08 */ "through jam", - /* 0x09 */ "output jam", - /* 0x0a */ "cover open", - /* 0x0b */ "fuser malfunction", - /* 0x0c */ "imager malfunction", - /* 0x0d */ "motor malfunction", - /* 0x0e */ "video malfunction", - /* 0x0f */ NULL, - /* 0x10 */ "printer system timeout", - /* 0x11 */ NULL, - /* 0x12 */ "invalid operation code", - /* 0x13 */ NULL, - /* 0x14 */ NULL, - /* 0x15 */ "invalid device number", - /* 0x16 */ NULL, - /* 0x17 */ NULL, - /* 0x18 */ NULL, - /* 0x19 */ NULL, - /* 0x1a */ "invalid parameter list", - /* 0x1b */ "ACSI timeout", - /* 0x1c */ "not all printed" -}; - -#define N_ERRORS (sizeof(SLMErrors)/sizeof(*SLMErrors)) - -/* real (driver caused) error? */ -#define IS_REAL_ERROR(x) (x > 0x10) - - -static struct { - char *name; - int w, h; -} StdPageSize[] = { - { "Letter", 2400, 3180 }, - { "Legal", 2400, 4080 }, - { "A4", 2336, 3386 }, - { "B5", 2016, 2914 } -}; - -#define N_STD_SIZES (sizeof(StdPageSize)/sizeof(*StdPageSize)) - -#define SLM_BUFFER_SIZE (2336*3386/8) /* A4 for now */ -#define SLM_DMA_AMOUNT 255 /* #sectors to program the DMA for */ - -#ifdef SLM_CONTINUOUS_DMA -# define SLM_DMA_INT_OFFSET 0 /* DMA goes until seccnt 0, no offs */ -# define SLM_DMA_END_OFFSET 32 /* 32 Byte ST-DMA FIFO */ -# define SLM_SLICE_SIZE(w) (255*512) -#else -# define SLM_DMA_INT_OFFSET 32 /* 32 Byte ST-DMA FIFO */ -# define SLM_DMA_END_OFFSET 32 /* 32 Byte ST-DMA FIFO */ -# define SLM_SLICE_SIZE(w) ((254*512)/(w/8)*(w/8)) -#endif - -/* calculate the number of jiffies to wait for 'n' bytes */ -#ifdef SLM_CONT_CNT_REPROG -#define DMA_TIME_FOR(n) 50 -#define DMA_STARTUP_TIME 0 -#else -#define DMA_TIME_FOR(n) (n/1400-1) -#define DMA_STARTUP_TIME 650 -#endif - -/***************************** Prototypes *****************************/ - -static char *slm_errstr( int stat ); -static int slm_getstats( char *buffer, int device ); -static ssize_t slm_read( struct file* file, char *buf, size_t count, loff_t - *ppos ); -static void start_print( int device ); -static irqreturn_t slm_interrupt(int irc, void *data); -static void slm_test_ready( unsigned long dummy ); -static void set_dma_addr( unsigned long paddr ); -static unsigned long get_dma_addr( void ); -static ssize_t slm_write( struct file *file, const char *buf, size_t count, - loff_t *ppos ); -static int slm_ioctl( struct inode *inode, struct file *file, unsigned int - cmd, unsigned long arg ); -static int slm_open( struct inode *inode, struct file *file ); -static int slm_release( struct inode *inode, struct file *file ); -static int slm_req_sense( int device ); -static int slm_mode_sense( int device, char *buffer, int abs_flag ); -#if 0 -static int slm_mode_select( int device, char *buffer, int len, int - default_flag ); -#endif -static int slm_get_pagesize( int device, int *w, int *h ); - -/************************* End of Prototypes **************************/ - - -static DEFINE_TIMER(slm_timer, slm_test_ready, 0, 0); - -static const struct file_operations slm_fops = { - .owner = THIS_MODULE, - .read = slm_read, - .write = slm_write, - .ioctl = slm_ioctl, - .open = slm_open, - .release = slm_release, -}; - - -/* ---------------------------------------------------------------------- */ -/* Status Functions */ - - -static char *slm_errstr( int stat ) - -{ char *p; - static char str[22]; - - stat &= 0x1f; - if (stat >= 0 && stat < N_ERRORS && (p = SLMErrors[stat])) - return( p ); - sprintf( str, "unknown status 0x%02x", stat ); - return( str ); -} - - -static int slm_getstats( char *buffer, int device ) - -{ int len = 0, stat, i, w, h; - unsigned char buf[256]; - - stat = slm_mode_sense( device, buf, 0 ); - if (IS_REAL_ERROR(stat)) - return( -EIO ); - -#define SHORTDATA(i) ((buf[i] << 8) | buf[i+1]) -#define BOOLDATA(i,mask) ((buf[i] & mask) ? "on" : "off") - - w = SHORTDATA( 3 ); - h = SHORTDATA( 1 ); - - len += sprintf( buffer+len, "Status\t\t%s\n", - slm_errstr( stat ) ); - len += sprintf( buffer+len, "Page Size\t%dx%d", - w, h ); - - for( i = 0; i < N_STD_SIZES; ++i ) { - if (w == StdPageSize[i].w && h == StdPageSize[i].h) - break; - } - if (i < N_STD_SIZES) - len += sprintf( buffer+len, " (%s)", StdPageSize[i].name ); - buffer[len++] = '\n'; - - len += sprintf( buffer+len, "Top/Left Margin\t%d/%d\n", - SHORTDATA( 5 ), SHORTDATA( 7 ) ); - len += sprintf( buffer+len, "Manual Feed\t%s\n", - BOOLDATA( 9, 0x01 ) ); - len += sprintf( buffer+len, "Input Select\t%d\n", - (buf[9] >> 1) & 7 ); - len += sprintf( buffer+len, "Auto Select\t%s\n", - BOOLDATA( 9, 0x10 ) ); - len += sprintf( buffer+len, "Prefeed Paper\t%s\n", - BOOLDATA( 9, 0x20 ) ); - len += sprintf( buffer+len, "Thick Pixels\t%s\n", - BOOLDATA( 9, 0x40 ) ); - len += sprintf( buffer+len, "H/V Resol.\t%d/%d dpi\n", - SHORTDATA( 12 ), SHORTDATA( 10 ) ); - len += sprintf( buffer+len, "System Timeout\t%d\n", - buf[14] ); - len += sprintf( buffer+len, "Scan Time\t%d\n", - SHORTDATA( 15 ) ); - len += sprintf( buffer+len, "Page Count\t%d\n", - SHORTDATA( 17 ) ); - len += sprintf( buffer+len, "In/Out Cap.\t%d/%d\n", - SHORTDATA( 19 ), SHORTDATA( 21 ) ); - len += sprintf( buffer+len, "Stagger Output\t%s\n", - BOOLDATA( 23, 0x01 ) ); - len += sprintf( buffer+len, "Output Select\t%d\n", - (buf[23] >> 1) & 7 ); - len += sprintf( buffer+len, "Duplex Print\t%s\n", - BOOLDATA( 23, 0x10 ) ); - len += sprintf( buffer+len, "Color Sep.\t%s\n", - BOOLDATA( 23, 0x20 ) ); - - return( len ); -} - - -static ssize_t slm_read( struct file *file, char *buf, size_t count, - loff_t *ppos ) - -{ - struct inode *node = file->f_path.dentry->d_inode; - unsigned long page; - int length; - int end; - - if (!(page = __get_free_page( GFP_KERNEL ))) - return( -ENOMEM ); - - length = slm_getstats( (char *)page, iminor(node) ); - if (length < 0) { - count = length; - goto out; - } - if (file->f_pos >= length) { - count = 0; - goto out; - } - if (count + file->f_pos > length) - count = length - file->f_pos; - end = count + file->f_pos; - if (copy_to_user(buf, (char *)page + file->f_pos, count)) { - count = -EFAULT; - goto out; - } - file->f_pos = end; -out: free_page( page ); - return( count ); -} - - -/* ---------------------------------------------------------------------- */ -/* Printing */ - - -static void start_print( int device ) - -{ struct slm *sip = &slm_info[device]; - unsigned char *cmd; - unsigned long paddr; - int i; - - stdma_lock( slm_interrupt, NULL ); - - CMDSET_TARG_LUN( slmprint_cmd, sip->target, sip->lun ); - cmd = slmprint_cmd; - paddr = virt_to_phys( SLMBuffer ); - dma_cache_maintenance( paddr, virt_to_phys(BufferP)-paddr, 1 ); - DISABLE_IRQ(); - - /* Low on A1 */ - dma_wd.dma_mode_status = 0x88; - MFPDELAY(); - - /* send the command bytes except the last */ - for( i = 0; i < 5; ++i ) { - DMA_LONG_WRITE( *cmd++, 0x8a ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) { - SLMError = 1; - return; /* timeout */ - } - } - /* last command byte */ - DMA_LONG_WRITE( *cmd++, 0x82 ); - MFPDELAY(); - /* set DMA address */ - set_dma_addr( paddr ); - /* program DMA for write and select sector counter reg */ - dma_wd.dma_mode_status = 0x192; - MFPDELAY(); - /* program for 255*512 bytes and start DMA */ - DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 ); - -#ifndef SLM_CONT_CNT_REPROG - SLMCurAddr = paddr; - SLMEndAddr = paddr + SLMSliceSize + SLM_DMA_INT_OFFSET; -#endif - START_TIMER( DMA_STARTUP_TIME + DMA_TIME_FOR( SLMSliceSize )); -#if !defined(SLM_CONT_CNT_REPROG) && defined(DEBUG) - printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n", - SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) ); -#endif - - ENABLE_IRQ(); -} - - -/* Only called when an error happened or at the end of a page */ - -static irqreturn_t slm_interrupt(int irc, void *data) - -{ unsigned long addr; - int stat; - - STOP_TIMER(); - addr = get_dma_addr(); - stat = acsi_getstatus(); - SLMError = (stat < 0) ? SLMSTAT_ACSITO : - (addr < virt_to_phys(BufferP)) ? SLMSTAT_NOTALL : - stat; - - dma_wd.dma_mode_status = 0x80; - MFPDELAY(); -#ifdef DEBUG - printk( "SLM: interrupt, addr=%#lx, error=%d\n", addr, SLMError ); -#endif - - wake_up( &print_wait ); - stdma_release(); - ENABLE_IRQ(); - return IRQ_HANDLED; -} - - -static void slm_test_ready( unsigned long dummy ) - -{ -#ifdef SLM_CONT_CNT_REPROG - /* program for 255*512 bytes again */ - dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT; - START_TIMER( DMA_TIME_FOR(0) ); -#ifdef DEBUG - printk( "SLM: reprogramming timer for %d jiffies, addr=%#lx\n", - DMA_TIME_FOR(0), get_dma_addr() ); -#endif - -#else /* !SLM_CONT_CNT_REPROG */ - - unsigned long flags, addr; - int d, ti; -#ifdef DEBUG - struct timeval start_tm, end_tm; - int did_wait = 0; -#endif - - local_irq_save(flags); - - addr = get_dma_addr(); - if ((d = SLMEndAddr - addr) > 0) { - local_irq_restore(flags); - - /* slice not yet finished, decide whether to start another timer or to - * busy-wait */ - ti = DMA_TIME_FOR( d ); - if (ti > 0) { -#ifdef DEBUG - printk( "SLM: reprogramming timer for %d jiffies, rest %d bytes\n", - ti, d ); -#endif - START_TIMER( ti ); - return; - } - /* wait for desired end address to be reached */ -#ifdef DEBUG - do_gettimeofday( &start_tm ); - did_wait = 1; -#endif - local_irq_disable(); - while( get_dma_addr() < SLMEndAddr ) - barrier(); - } - - /* slice finished, start next one */ - SLMCurAddr += SLMSliceSize; - -#ifdef SLM_CONTINUOUS_DMA - /* program for 255*512 bytes again */ - dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT; -#else - /* set DMA address; - * add 2 bytes for the ones in the SLM controller FIFO! */ - set_dma_addr( SLMCurAddr + 2 ); - /* toggle DMA to write and select sector counter reg */ - dma_wd.dma_mode_status = 0x92; - MFPDELAY(); - dma_wd.dma_mode_status = 0x192; - MFPDELAY(); - /* program for 255*512 bytes and start DMA */ - DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 ); -#endif - - local_irq_restore(flags); - -#ifdef DEBUG - if (did_wait) { - int ms; - do_gettimeofday( &end_tm ); - ms = (end_tm.tv_sec*1000000+end_tm.tv_usec) - - (start_tm.tv_sec*1000000+start_tm.tv_usec); - printk( "SLM: did %ld.%ld ms busy waiting for %d bytes\n", - ms/1000, ms%1000, d ); - } - else - printk( "SLM: didn't wait (!)\n" ); -#endif - - if ((unsigned char *)PTOV( SLMCurAddr + SLMSliceSize ) >= BufferP) { - /* will be last slice, no timer necessary */ -#ifdef DEBUG - printk( "SLM: CurAddr=%#lx EndAddr=%#lx last slice -> no timer\n", - SLMCurAddr, SLMEndAddr ); -#endif - } - else { - /* not last slice */ - SLMEndAddr = SLMCurAddr + SLMSliceSize + SLM_DMA_INT_OFFSET; - START_TIMER( DMA_TIME_FOR( SLMSliceSize )); -#ifdef DEBUG - printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n", - SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) ); -#endif - } -#endif /* SLM_CONT_CNT_REPROG */ -} - - -static void set_dma_addr( unsigned long paddr ) - -{ unsigned long flags; - - local_irq_save(flags); - dma_wd.dma_lo = (unsigned char)paddr; - paddr >>= 8; - MFPDELAY(); - dma_wd.dma_md = (unsigned char)paddr; - paddr >>= 8; - MFPDELAY(); - if (ATARIHW_PRESENT( EXTD_DMA )) - st_dma_ext_dmahi = (unsigned short)paddr; - else - dma_wd.dma_hi = (unsigned char)paddr; - MFPDELAY(); - local_irq_restore(flags); -} - - -static unsigned long get_dma_addr( void ) - -{ unsigned long addr; - - addr = dma_wd.dma_lo & 0xff; - MFPDELAY(); - addr |= (dma_wd.dma_md & 0xff) << 8; - MFPDELAY(); - addr |= (dma_wd.dma_hi & 0xff) << 16; - MFPDELAY(); - - return( addr ); -} - - -static ssize_t slm_write( struct file *file, const char *buf, size_t count, - loff_t *ppos ) - -{ - struct inode *node = file->f_path.dentry->d_inode; - int device = iminor(node); - int n, filled, w, h; - - while( SLMState == PRINTING || - (SLMState == FILLING && SLMBufOwner != device) ) { - interruptible_sleep_on( &slm_wait ); - if (signal_pending(current)) - return( -ERESTARTSYS ); - } - if (SLMState == IDLE) { - /* first data of page: get current page size */ - if (slm_get_pagesize( device, &w, &h )) - return( -EIO ); - BufferSize = w*h/8; - if (BufferSize > SLM_BUFFER_SIZE) - return( -ENOMEM ); - - SLMState = FILLING; - SLMBufOwner = device; - } - - n = count; - filled = BufferP - SLMBuffer; - if (filled + n > BufferSize) - n = BufferSize - filled; - - if (copy_from_user(BufferP, buf, n)) - return -EFAULT; - BufferP += n; - filled += n; - - if (filled == BufferSize) { - /* Check the paper size again! The user may have switched it in the - * time between starting the data and finishing them. Would end up in - * a trashy page... */ - if (slm_get_pagesize( device, &w, &h )) - return( -EIO ); - if (BufferSize != w*h/8) { - printk( KERN_NOTICE "slm%d: page size changed while printing\n", - device ); - return( -EAGAIN ); - } - - SLMState = PRINTING; - /* choose a slice size that is a multiple of the line size */ -#ifndef SLM_CONT_CNT_REPROG - SLMSliceSize = SLM_SLICE_SIZE(w); -#endif - - start_print( device ); - sleep_on( &print_wait ); - if (SLMError && IS_REAL_ERROR(SLMError)) { - printk( KERN_ERR "slm%d: %s\n", device, slm_errstr(SLMError) ); - n = -EIO; - } - - SLMState = IDLE; - BufferP = SLMBuffer; - wake_up_interruptible( &slm_wait ); - } - - return( n ); -} - - -/* ---------------------------------------------------------------------- */ -/* ioctl Functions */ - - -static int slm_ioctl( struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg ) - -{ int device = iminor(inode), err; - - /* I can think of setting: - * - manual feed - * - paper format - * - copy count - * - ... - * but haven't implemented that yet :-) - * BTW, has anybody better docs about the MODE SENSE/MODE SELECT data? - */ - switch( cmd ) { - - case SLMIORESET: /* reset buffer, i.e. empty the buffer */ - if (!(file->f_mode & 2)) - return( -EINVAL ); - if (SLMState == PRINTING) - return( -EBUSY ); - SLMState = IDLE; - BufferP = SLMBuffer; - wake_up_interruptible( &slm_wait ); - return( 0 ); - - case SLMIOGSTAT: { /* get status */ - int stat; - char *str; - - stat = slm_req_sense( device ); - if (arg) { - str = slm_errstr( stat ); - if (put_user(stat, - (long *)&((struct SLM_status *)arg)->stat)) - return -EFAULT; - if (copy_to_user( ((struct SLM_status *)arg)->str, str, - strlen(str) + 1)) - return -EFAULT; - } - return( stat ); - } - - case SLMIOGPSIZE: { /* get paper size */ - int w, h; - - if ((err = slm_get_pagesize( device, &w, &h ))) return( err ); - - if (put_user(w, (long *)&((struct SLM_paper_size *)arg)->width)) - return -EFAULT; - if (put_user(h, (long *)&((struct SLM_paper_size *)arg)->height)) - return -EFAULT; - return( 0 ); - } - - case SLMIOGMFEED: /* get manual feed */ - return( -EINVAL ); - - case SLMIOSPSIZE: /* set paper size */ - return( -EINVAL ); - - case SLMIOSMFEED: /* set manual feed */ - return( -EINVAL ); - - } - return( -EINVAL ); -} - - -/* ---------------------------------------------------------------------- */ -/* Opening and Closing */ - - -static int slm_open( struct inode *inode, struct file *file ) - -{ int device; - struct slm *sip; - - device = iminor(inode); - if (device >= N_SLM_Printers) - return( -ENXIO ); - sip = &slm_info[device]; - - if (file->f_mode & 2) { - /* open for writing is exclusive */ - if ( !atomic_dec_and_test(&sip->wr_ok) ) { - atomic_inc(&sip->wr_ok); - return( -EBUSY ); - } - } - if (file->f_mode & 1) { - /* open for reading is exclusive */ - if ( !atomic_dec_and_test(&sip->rd_ok) ) { - atomic_inc(&sip->rd_ok); - return( -EBUSY ); - } - } - - return( 0 ); -} - - -static int slm_release( struct inode *inode, struct file *file ) - -{ int device; - struct slm *sip; - - device = iminor(inode); - sip = &slm_info[device]; - - if (file->f_mode & 2) - atomic_inc( &sip->wr_ok ); - if (file->f_mode & 1) - atomic_inc( &sip->rd_ok ); - - return( 0 ); -} - - -/* ---------------------------------------------------------------------- */ -/* ACSI Primitives for the SLM */ - - -static int slm_req_sense( int device ) - -{ int stat, rv; - struct slm *sip = &slm_info[device]; - - stdma_lock( NULL, NULL ); - - CMDSET_TARG_LUN( slmreqsense_cmd, sip->target, sip->lun ); - if (!acsicmd_nodma( slmreqsense_cmd, 0 ) || - (stat = acsi_getstatus()) < 0) - rv = SLMSTAT_ACSITO; - else - rv = stat & 0x1f; - - ENABLE_IRQ(); - stdma_release(); - return( rv ); -} - - -static int slm_mode_sense( int device, char *buffer, int abs_flag ) - -{ unsigned char stat, len; - int rv = 0; - struct slm *sip = &slm_info[device]; - - stdma_lock( NULL, NULL ); - - CMDSET_TARG_LUN( slmmsense_cmd, sip->target, sip->lun ); - slmmsense_cmd[5] = abs_flag ? 0x80 : 0; - if (!acsicmd_nodma( slmmsense_cmd, 0 )) { - rv = SLMSTAT_ACSITO; - goto the_end; - } - - if (!acsi_extstatus( &stat, 1 )) { - acsi_end_extstatus(); - rv = SLMSTAT_ACSITO; - goto the_end; - } - - if (!acsi_extstatus( &len, 1 )) { - acsi_end_extstatus(); - rv = SLMSTAT_ACSITO; - goto the_end; - } - buffer[0] = len; - if (!acsi_extstatus( buffer+1, len )) { - acsi_end_extstatus(); - rv = SLMSTAT_ACSITO; - goto the_end; - } - - acsi_end_extstatus(); - rv = stat & 0x1f; - - the_end: - ENABLE_IRQ(); - stdma_release(); - return( rv ); -} - - -#if 0 -/* currently unused */ -static int slm_mode_select( int device, char *buffer, int len, - int default_flag ) - -{ int stat, rv; - struct slm *sip = &slm_info[device]; - - stdma_lock( NULL, NULL ); - - CMDSET_TARG_LUN( slmmselect_cmd, sip->target, sip->lun ); - slmmselect_cmd[5] = default_flag ? 0x80 : 0; - if (!acsicmd_nodma( slmmselect_cmd, 0 )) { - rv = SLMSTAT_ACSITO; - goto the_end; - } - - if (!default_flag) { - unsigned char c = len; - if (!acsi_extcmd( &c, 1 )) { - rv = SLMSTAT_ACSITO; - goto the_end; - } - if (!acsi_extcmd( buffer, len )) { - rv = SLMSTAT_ACSITO; - goto the_end; - } - } - - stat = acsi_getstatus(); - rv = (stat < 0 ? SLMSTAT_ACSITO : stat); - - the_end: - ENABLE_IRQ(); - stdma_release(); - return( rv ); -} -#endif - - -static int slm_get_pagesize( int device, int *w, int *h ) - -{ char buf[256]; - int stat; - - stat = slm_mode_sense( device, buf, 0 ); - ENABLE_IRQ(); - stdma_release(); - - if (stat != SLMSTAT_OK) - return( -EIO ); - - *w = (buf[3] << 8) | buf[4]; - *h = (buf[1] << 8) | buf[2]; - return( 0 ); -} - - -/* ---------------------------------------------------------------------- */ -/* Initialization */ - - -int attach_slm( int target, int lun ) - -{ static int did_register; - int len; - - if (N_SLM_Printers >= MAX_SLM) { - printk( KERN_WARNING "Too much SLMs\n" ); - return( 0 ); - } - - /* do an INQUIRY */ - udelay(100); - CMDSET_TARG_LUN( slminquiry_cmd, target, lun ); - if (!acsicmd_nodma( slminquiry_cmd, 0 )) { - inq_timeout: - printk( KERN_ERR "SLM inquiry command timed out.\n" ); - inq_fail: - acsi_end_extstatus(); - return( 0 ); - } - /* read status and header of return data */ - if (!acsi_extstatus( SLMBuffer, 6 )) - goto inq_timeout; - - if (SLMBuffer[1] != 2) { /* device type == printer? */ - printk( KERN_ERR "SLM inquiry returned device type != printer\n" ); - goto inq_fail; - } - len = SLMBuffer[5]; - - /* read id string */ - if (!acsi_extstatus( SLMBuffer, len )) - goto inq_timeout; - acsi_end_extstatus(); - SLMBuffer[len] = 0; - - if (!did_register) { - did_register = 1; - } - - slm_info[N_SLM_Printers].target = target; - slm_info[N_SLM_Printers].lun = lun; - atomic_set(&slm_info[N_SLM_Printers].wr_ok, 1 ); - atomic_set(&slm_info[N_SLM_Printers].rd_ok, 1 ); - - printk( KERN_INFO " Printer: %s\n", SLMBuffer ); - printk( KERN_INFO "Detected slm%d at id %d lun %d\n", - N_SLM_Printers, target, lun ); - N_SLM_Printers++; - return( 1 ); -} - -int slm_init( void ) - -{ - int i; - if (register_chrdev( ACSI_MAJOR, "slm", &slm_fops )) { - printk( KERN_ERR "Unable to get major %d for ACSI SLM\n", ACSI_MAJOR ); - return -EBUSY; - } - - if (!(SLMBuffer = atari_stram_alloc( SLM_BUFFER_SIZE, "SLM" ))) { - printk( KERN_ERR "Unable to get SLM ST-Ram buffer.\n" ); - unregister_chrdev( ACSI_MAJOR, "slm" ); - return -ENOMEM; - } - BufferP = SLMBuffer; - SLMState = IDLE; - - return 0; -} - -#ifdef MODULE - -/* from acsi.c */ -void acsi_attach_SLMs( int (*attach_func)( int, int ) ); - -int init_module(void) -{ - int err; - - if ((err = slm_init())) - return( err ); - /* This calls attach_slm() for every target/lun where acsi.c detected a - * printer */ - acsi_attach_SLMs( attach_slm ); - return( 0 ); -} - -void cleanup_module(void) -{ - if (unregister_chrdev( ACSI_MAJOR, "slm" ) != 0) - printk( KERN_ERR "acsi_slm: cleanup_module failed\n"); - atari_stram_free( SLMBuffer ); -} -#endif -- cgit v1.2.3-18-g5258