From 40cbbb781d3eba5d6ac0860db078af490e5c7c6b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Apr 2009 11:05:19 +0900 Subject: block: implement and use [__]blk_end_request_all() There are many [__]blk_end_request() call sites which call it with full request length and expect full completion. Many of them ensure that the request actually completes by doing BUG_ON() the return value, which is awkward and error-prone. This patch adds [__]blk_end_request_all() which takes @rq and @error and fully completes the request. BUG_ON() is added to to ensure that this actually happens. Most conversions are simple but there are a few noteworthy ones. * cdrom/viocd: viocd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/block/dasd: dasd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/char/tape_block: tapeblock_end_request() replaced with direct calls to blk_end_request_all(). [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Russell King Cc: Stephen Rothwell Cc: Mike Miller Cc: Martin Schwidefsky Cc: Jeff Garzik Cc: Rusty Russell Cc: Jeremy Fitzhardinge Cc: Alex Dubov Cc: James Bottomley --- drivers/block/cpqarray.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/block/cpqarray.c') diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index ca268ca1115..488a8f4a60a 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -1024,8 +1024,7 @@ static inline void complete_command(cmdlist_t *cmd, int timeout) cmd->req.sg[i].size, ddir); DBGPX(printk("Done with %p\n", rq);); - if (__blk_end_request(rq, error, blk_rq_bytes(rq))) - BUG(); + __blk_end_request_all(rq, error); } /* -- cgit v1.2.3-18-g5258 From 83096ebf1263b2c1ee5e653ba37d993d02e3eb7b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:39 +0900 Subject: block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo Acked-by: Geert Uytterhoeven Tested-by: Grant Likely Acked-by: Grant Likely Tested-by: Adrian McMenamin Acked-by: Adrian McMenamin Acked-by: Mike Miller Cc: James Bottomley Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Eric Moore Cc: Alan Stern Cc: FUJITA Tomonori Cc: Pete Zaitcev Cc: Stephen Rothwell Cc: Paul Clements Cc: Tim Waugh Cc: Jeff Garzik Cc: Jeremy Fitzhardinge Cc: Alex Dubov Cc: David Woodhouse Cc: Martin Schwidefsky Cc: Dario Ballabio Cc: David S. Miller Cc: Rusty Russell Cc: unsik Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe --- drivers/block/cpqarray.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/block/cpqarray.c') diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index 488a8f4a60a..a5caeff4718 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -919,10 +919,11 @@ queue_next: c->hdr.size = sizeof(rblk_t) >> 2; c->size += sizeof(rblk_t); - c->req.hdr.blk = creq->sector; + c->req.hdr.blk = blk_rq_pos(creq); c->rq = creq; DBGPX( - printk("sector=%d, nr_sectors=%d\n", creq->sector, creq->nr_sectors); + printk("sector=%d, nr_sectors=%u\n", + blk_rq_pos(creq), blk_rq_sectors(creq)); ); sg_init_table(tmp_sg, SG_MAX); seg = blk_rq_map_sg(q, creq, tmp_sg); @@ -940,9 +941,9 @@ DBGPX( tmp_sg[i].offset, tmp_sg[i].length, dir); } -DBGPX( printk("Submitting %d sectors in %d segments\n", creq->nr_sectors, seg); ); +DBGPX( printk("Submitting %u sectors in %d segments\n", blk_rq_sectors(creq), seg); ); c->req.hdr.sg_cnt = seg; - c->req.hdr.blk_cnt = creq->nr_sectors; + c->req.hdr.blk_cnt = blk_rq_sectors(creq); c->req.hdr.cmd = (rq_data_dir(creq) == READ) ? IDA_READ : IDA_WRITE; c->type = CMD_RWREQ; -- cgit v1.2.3-18-g5258 From 9934c8c04561413609d2bc38c6b9f268cba774a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:16 +0900 Subject: block: implement and enforce request peek/start/fetch Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo Cc: Rusty Russell Cc: James Bottomley Cc: Mike Miller Cc: unsik Kim Cc: Paul Clements Cc: Tim Waugh Cc: Geert Uytterhoeven Cc: David S. Miller Cc: Laurent Vivier Cc: Jeff Garzik Cc: Jeremy Fitzhardinge Cc: Grant Likely Cc: Adrian McMenamin Cc: Stephen Rothwell Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Alex Dubov Cc: Pierre Ossman Cc: David Woodhouse Cc: Markus Lidel Cc: Stefan Weinhuber Cc: Martin Schwidefsky Cc: Pete Zaitcev Cc: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/block/cpqarray.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/block/cpqarray.c') diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index a5caeff4718..a02dcfc00f1 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -903,7 +903,7 @@ static void do_ida_request(struct request_queue *q) goto startio; queue_next: - creq = elv_next_request(q); + creq = blk_peek_request(q); if (!creq) goto startio; @@ -912,7 +912,7 @@ queue_next: if ((c = cmd_alloc(h,1)) == NULL) goto startio; - blkdev_dequeue_request(creq); + blk_start_request(creq); c->ctlr = h->ctlr; c->hdr.unit = (drv_info_t *)(creq->rq_disk->private_data) - h->drv; -- cgit v1.2.3-18-g5258 From e1defc4ff0cf57aca6c5e3ff99fa503f5943c1f1 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 22 May 2009 17:17:49 -0400 Subject: block: Do away with the notion of hardsect_size Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/block/cpqarray.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/block/cpqarray.c') diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index a02dcfc00f1..44fa2018f6b 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -474,7 +474,7 @@ static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev) disk->fops = &ida_fops; if (j && !drv->nr_blks) continue; - blk_queue_hardsect_size(hba[i]->queue, drv->blk_size); + blk_queue_logical_block_size(hba[i]->queue, drv->blk_size); set_capacity(disk, drv->nr_blks); disk->queue = hba[i]->queue; disk->private_data = drv; @@ -1546,7 +1546,7 @@ static int revalidate_allvol(ctlr_info_t *host) drv_info_t *drv = &host->drv[i]; if (i && !drv->nr_blks) continue; - blk_queue_hardsect_size(host->queue, drv->blk_size); + blk_queue_logical_block_size(host->queue, drv->blk_size); set_capacity(disk, drv->nr_blks); disk->queue = host->queue; disk->private_data = drv; -- cgit v1.2.3-18-g5258